Lutron Electronics 0023 H-RFP-1P Central Processing Unit User Manual RF proc spec

Lutron Electronics Company Inc H-RFP-1P Central Processing Unit RF proc spec

Contents

Users Manual

PRELIMINARY®SPECIFICATION SUBMITTALMODEL NUMBERS:JOB NAME:JOB NUMBER:PagePROCESSORS RF Processor048-020 1a 11.05.02HomeWorks InteractiveTMHomeWorks®RF ProcessorsRF ProcessorDESCRIPTIONHomeWorks RF Processors comprise the major communication hubof a HomeWorks RF system. Each RF Processor will support up to 32RF Keypads and up to 64 RF Dimmers. RF system devices communi-cate with the RF Processor via Radio Frequency.Up to 4 RF Signal Repeaters may be used with each processor toextend the range of the RF Processor.A maximum of 16 RF processors may be connected together in asystem to support a total of 1024 RF dimmers/switches and 512RF keypads.MODEL NUMBERS RF ProcessorsH-RFP-1P RF Processor with 1 RS232 PortH-RFP-2P RF Processor with 2 RS232 Ports
#OK*®SPECIFICATION SUBMITTALMODEL NUMBERS:JOB NAME:JOB NUMBER:PagePROCESSORSHomeWorks InteractiveTM RF Processor048-020 2a 11.05.02PRELIMINARY• Battery backup will maintain program-ming for up to 10 years under normaluse.• Built in astronomical time clock.• Programming is done via RS-232 connec-tion using existing HomeWorksInteractive software.• Built in vacation and security modes. • Advanced keypad button programmingallowing sequences and use of condition-al logic for keypad button press events.• RS-232 port for integrating other equip-ment such as AV or HVAC.• Field upgradeable software for the RFprocessor allows additional features tobe used in the future.• Plugs into a standard electrical outletusing the supplied DC Adapter; no highvoltage wiring necessary.• Fully compatible with all existing fea-tures and operation style of HomeWorksInteractive.• Tested to withstand electrostatic dis-charge without damage or memory loss,SPECIFICATIONSRegulatory Approvals• UL Listed (DC Adapter).• Complies with the limits for a Class Bdigital device, pursuant to Part 15 of theFCC Rules.Power• DC Adapter:Input power: 120/127VAC,50/60HzOutput power: 24VDC, 500mA• Use only the DC Adapter provided byLutron with the RF Processor.Key Design Features• Allows installation of HomeWorksInteractive systems in any home - new orexisting.• Can be connected to an existing HWIsystem or exist as a stand alone radio-frequency (RF) system.• Graphical LCD with user-friendly menusfor setup and diagnostics.• Durable membrane keypad for user inter-face.in accordance with IEC 6100-4-2.• Tested to withstand surge voltages with-out damage or loss of operation,in accor-dance with IEEE C62.41-1991Recommended Practice on Surge Voltagesin Low-Voltage AC Power Circuits.System Communications and Capacity• Each RF Processor supports up to 64HomeWorks Maestro RF dimmers/switchesor Tabletop RF Lamp dimmers.• Each RF Processor supports up to 32HomeWorks RF Keypads or Tabletop RFKeypads.• A maximum of 16 RF processors may beconnected together in a system to sup-port a total of 1024 RF dimmers/switch-es and 512 RF keypads.EnvironmentAmbient operating temperature: 0-40°C,32-104°F, 0-90% humidity, non-condens-ing. Indoor use only.Warranty• 8 Year Limited Warranty. MOUNTINGMounting ScrewMounting ScrewOptional Mounting ScrewFCC InformationNote: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 ofthe FCC rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installa-tion. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed in accordance with theinstructions, may cause harmful interference to radio communi-cations. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment doescause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by oneor more of the following measures: • Reorient or relocate the receiving antenna.• Increase the seperation between the equipment andreceiver.• Connect the equipment into an outlet on a circuit dif-ferent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV tech-nician for help.Caution: Changes or modifications not expressly approved byLutron Electronics Co. could void the user’s authority to operatethis equipment.Industry Canada InformationThe term “IC:” before the radio certification number only signi-fies that Industry Canada technical specifications were met.
®SPECIFICATION SUBMITTALMODEL NUMBERS:JOB NAME:JOB NUMBER:PagePROCESSORSHomeWorks InteractiveTM RF Processor048-020 3a 11.05.02PRELIMINARYDIMENSIONS11.54"(293mm)8"(203mm)1.25"(32mm)6.16"(157mm)6.7"(170mm)0.70"(18mm)Front View(port cover removed)Side ViewTOUCHPAD#OK*Home KeyReturns user to theHome ScreenPower LEDMenu Navigation KeysAllows user to navigatethrough the variousscreens and menus onthe LCD ScreenLCD Screen5.77"(147mm)1.77"(45mm)
®SPECIFICATION SUBMITTALMODEL NUMBERS:JOB NAME:JOB NUMBER:PagePROCESSORSHomeWorks InteractiveTM RF Processor048-020 4a 11.05.02PRELIMINARY12 341234881234123412341234Link 7RS-232 LinkG1 V1 G2 V2 G3 V3 G4 V4 G5 V5 G6 V61234 1234 1234BUS6RXTXBUS5RXTXBUS4RXTXBUS3RXTXBUS2RXTXBUS1RXTXPROCESSORLINKRXTXPROCESSORLINK#OK*#OK*34123412343434123434#OK*POWER SUPPLY CONNECTIONINTER-PROCESSOR WIRINGWIRINGProcessor wiring must be in a daisy-chainconfiguration. The total length of wire onthe Inter-Processor Link may be up to1,000 ft. (305m). For wire runs exceeding50 ft. (15m) in length, LT-1 LinkTerminators must be used on the proces-sors at both ends of the wire run. Up to 16Processors (RF or Wired) may be connectedtogether.WIRE TYPETwo pair [one pair #18 AWG (1.0mm2), one pair #22-18 AWG (0.5-1.0mm2) twistedshielded] Class 2/PELV. Lutron wire, model# GRX-CBL-346S-500, may be used. LT-1 LinkTerminatorLT-1 LinkTerminatorWiring DetailLT-1 LinkTerminatorLT-1 LinkTerminatorWiring DetailRF Processor RF ProcessorWiredProcessorPin 1 - 1 No. 18 AWG (1.0mm2)Pins 3 & 4 - 1 pair No. 22-18 AWG (0.5 - 1.0mm2) twisted/shielded for dataPin 2 is not connected
®SPECIFICATION SUBMITTALMODEL NUMBERS:JOB NAME:JOB NUMBER:PagePROCESSORSHomeWorks InteractiveTM RF Processor048-020 5a 11.05.02PRELIMINARYSYSTEM COMMUNICATION NOTES• RF Dimmers and Keypads must be locatedwithin 30 feet (9.14m) of an RF SignalRepeater or an RF Processor. Multiplerepeaters may be necessary to provideadequate coverage.• RF Dimmers cannot be controlled and RFKeypads will not function until they areaddressed and programmed. See theHomeWorks Interactive ProgrammingUtility online help.• RF Processors and RF Signal Repeatersprovide RF coverage for an area ofapproximately 2500 sq. ft. (m2). One (1)RF Processor with four (4) RF SignalRepeaters will cover an area of approxi-mately 12,500 sq. ft. (m2). Additional RFProcessors with associated RF SignalRepeaters may be added to provide largercoverage areas.##* Start StartP/N 292-153P/N 292153RF TabletopKeypadRF Dimmer30 Feet (9m) maximumRF ProcessorRF KeypadHome A: 2500 sq. ft. (232m2) or less - all RF devices within 30' (9m) of RF Processor##P/N 292-153P/N 292153RF TabletopKeypadRF Dimmer30 Feet (9m) maximumRF ProcessorRF KeypadHome B: 2500 sq. ft. (232m2) or greater - some RF devices more than 30' (9m) from RF ProcessorRF Signal Repeater30 Feet (9m) maximum60 Feet (18m)maximumbetween RFProcessors andRepeaters, orbetweenRepeaters

Navigation menu