Lutron Electronics 0025 STRD-7B Transceiver (Keypad) User Manual 043 146a

Lutron Electronics Company Inc STRD-7B Transceiver (Keypad) 043 146a

User Manual

LEDs don't light up when buttons arepressed.Button presses on keypad cause the key-pad to quickly flash all its LEDs simultane-ously.Button presses on keypad cause the key-pad to slowly flash all its LEDs simultane-ously.Keypad cannot be addressed.LEDs light when button is pressed, but thesystem response is not correct.Designer-style RF seeTouchTMKeypadsSTRD-1B, -2B, -3B, -3BRL, -4B, -4FS, -4S,-4SIR, -5B, -5FS, -5BRL, -6B, -6BRL, -7B120 V ~, 50/60 Hz, 0.2 AInstallation InstructionsPlease Read Before InstallingLutron Electronics Co., Inc. 7200 Suter RoadCoopersburg, PA 18036-1299Made and printed in the U.S.A. 02/03 P/N 043-146 Rev. ALIMITED WARRANTYLutron will, at its option, repair or replace any unit that is defective in materials or manufacture within two years after purchase. For warranty serv-ice, return unit to place of purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone the LutronTechnical Support Center toll free at 800-523-9466. After the two year period, a pro-rated warranty applies to this product until eight years afterthe purchase. For more information regarding this warranty contact your Lutron representative.THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIM-ITED TO TWO YEARS FROM PURCHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION, REMOVAL OR REIN-STALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE, OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROP-ER WIRING OR INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES. LUTRON’S LIA-BILITY ON ANY CLAIM FOR DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION,DELIVERY, OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limita-tions on how long an implied warranty lasts, so the above limitation may not apply to you. Some states do not allow the exclusion or limitation ofincidental or consequential damages, so the above limitation or exclusion may not apply to you.These products may be covered under one or more of the following U.S. patents: 4,835,343; 4,889,999; 5,170,068; 5,237,207; 5,736,965;5,838,226; 5,848,054; 5,905,442; 5,982,103; D436,930; D453,742; D456,783; D461,782; D465,460; D465,770; D466,090; D466,091; D466,484and corresponding foreign patents. U.S. and foreign patents pending. Lutron, Claro and HomeWorks are registered trademarks and SatinColors, seeTouch and the HomeWorks Logo are trademarks of Lutron Electronics Co., Inc.© 2003 Lutron Electronics Co., Inc.Technical and Sales AssistanceIf you need assistance, call the toll-free LutronTechnical Support Center. Please provide exactmodel number when calling.(800) 523-9466 (U.S.A., Canada and the Caribbean)Other countries call:Tel: (610) 282-3800Fax: (610) 282-3090Visit our Web site at www.lutron.comFCC InformationNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-antee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the seperation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could void the user’s authority tooperate this equipment.Overview The STRD-1B, -2B, -3B, -3BRL, -4B, -4FS, -4S, -4SIR,-5B, -5FS, -5BRL, -6B, -6BRL,and -7B keypads are for usewith HomeWorks systems.The keypad buttons are pro-grammed with a personalcomputer using theHomeWorksUtility.Up to 32 keypads, each with aunique address, can beassigned to each HomeWorksRF Processor. Important NotesCodes: Install in accordance with all local and national electri-cal codes.Environment: Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor useonly.Wallplates: Lutron Claro®and Satin ColorsTM wallplates are rec-ommended for best color match and clean aesthetic appear-ance. Do not paint controls or wallplates.Cleaning: To clean, wipe with a clean damp cloth. DO NOTuse any chemical cleaning solutions.Wallboxes: Lutron recommends using 3-1/2 in. (89 mm) deepwallboxes for easier installation. RF Device Placement:RF Keypads must be located within 30ft. (9 m) of an RF Signal Repeater or an RF Processor. RF Keypads will not function until they are addressed and pro-grammed using the HomeWorks Utility.STRD-4SIR*STRD-6BRL* STRD-7B*STRD-1B* STRD-2B* STRD-3B* STRD-3BRL*STRD-4B* STRD-4FS*STRD-5B* STRD-5FS* STRD-6B*STRD-4S*STRD-5BRL**Wallplate/Adapterpurchased separately.1. Turn power OFF at fusebox or circuit breaker.Danger - Locate and remove fuse or lock circuit breakerin the OFF position before proceeding. Wiring withpower ON may result in personal injury.2. Prepare wires. When making wire connections, follow therecommended strip lengths and combinations for the sup-plied wire connectors. Note: Wire connectors provided aresuitable for copper wire only. Small: Strip insulation 3/8 in. (10 mm) for 14 AWG (2.5 mm2). Strip insulation 1/2 in. (13 mm) for 16 AWG (1.5 mm2).Use to join one 14 AWG supply wire with one 16or 18 AWG (1.0 mm2) control wire.3. Wiring: See Wiring Diagram.InstallationSmallMounting DiagramButton KitKeypadWallboxKeypadMountingScrewsAdapterMountingScrewsWallplate/Adapter purchasedseparately.Wiring Diagram120/127 VAC50/60 HzHot/Live BlackNeutralWhiteTroubleshooting GuideRF Keypads will not function until they are addressed and pro-grammed using the HomeWorks Utility.Symptom Cause and ActionPower not present at keypad• Circuit breaker OFF. Turn ON breaker.• Wiring error. Check wiring to be sure itagrees with installation instructions.Keypad has not been addressed. • Address the keypads using theHomeWorks Utility.Keypad has an address, but has not hadprogramming uploaded. • Upload to the system using theHomeWorks Utility.Keypad is out of RF communications range.• Move RF Signal Repeater or RFProcessor to within 30 feet (9 m) of key-pad.Improper programming• Check programming in HomeWorksUtility.4. Push all wires back into the wallbox and loosely fasten thecontrol to the wallbox using the keypad mounting screws pro-vided. Do not pinch the wires.5. Attach Lutron Claro or Satin Colors wallplate adapter andwallplate. a. Loosely install keypad mounting screws.b. Tighten wallplate adapter mounting screws snug.c. Tighten keypad mounting screws until wallplateadapter is flush to wall (do not over-tighten).d. Snap wallplate onto wallplate adapter, and verify thatbuttons are not submerged.e. If buttons are submerged, loosen keypad mountingscrews appropriately.6. Restore power.

Navigation menu