Lutron Electronics 0036 Lighting Control Transceiver User Manual 043 099a

Lutron Electronics Company Inc Lighting Control Transceiver 043 099a

Users Manual

1Please Read Before InstallingDesigner-Style RF Slim-Button KeypadsHRD-5KP, -5RL, -10KP, -10RL120 V , 0.5 A, 50/60 Hz Installation InstructionsOverviewThe HRD-5KP, -5RL, -10KP, and -10RL keypads arefor use with HomeWorks systems. The keypad buttonsare programmed with a personal computer using theHomeWorks Utility. Up to 32 keypads, each with a unique address, can beassigned to each HomeWorks RF Processor. HRD-5KPHRD-10KP HRD-10RLHRD-5RLImportant NotesCodes: Install in accordance with all local and nationalelectrical codes.Environment: Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing.Indoor use only.Wallplates: Lutron Claro®and Satin ColorsTM wallplatesare recommended for best color match and clean aes-thetic appearance. Do not paint controls or wallplates.Cleaning: To clean, wipe with a clean damp cloth. DONOT use any chemical cleaning solutions.Wallboxes: Lutron recommends using 3-1/2 in. (89 mm)deep wallboxes for easier installation. RF Device Placement: RF Keypads must be locatedwithin 30 feet (9 m) of an RF Signal Repeater or an RFProcessor. RF Keypads will not function until they are addressedand programmed. See the HomeWorks Utility onlinehelp.
2Mounting DiagramWallboxKeypadMountingScrewsKeypadAdapterMountingScrewsWallplate and Adapter are purchased separately.1. Turn power OFF at fusebox or circuit breaker.Danger - Locate and remove fuse or lock circuitbreaker in the OFF position before proceeding.Wiring with power ON may result in personalinjury.2. Prepare wires. When making wire connections, fol-low the recommended strip lengths and combina-tions for the supplied wire connectors. Note: Wireconnectors provided are suitable for copper wireonly. Small: Strip insulation 3/8 in. (10 mm) for 14 AWG (2.5 mm2). Strip insulation 1/2 in. (13 mm) for 16 AWG (1.5 mm2).Use to join one 14 AWG supply wire withone 16 or 18 AWG (1.0 mm2) controlwire.3. Wiring: See Wiring Diagram (page 3).4. Push all wires back into the wallbox and loosely fastenthe control to the wallbox using the keypad mountingscrews provided. Do not pinch the wires.5. Attach Lutron Claro®or Satin ColorsTM wallplateadapter and wallplate. a. Loosely install keypad mounting screws.b. Tighten wallplate adapter mounting screwssnug.c. Tighten keypad mounting screws untilwallplate adapter is flush to wall (do not over-tighten).d. Snap wallplate onto wallplate adapter, andverify that buttons are not submerged.e. If buttons are submerged, loosen keypadmounting screws appropriately.6. Restore power.Included:Wire Connectors (3)Mounting Screws (2)InstallationSmall
3Troubleshooting GuideRF Keypads will not function until they are addressed and programmed. See the HomeWorks Utility online help.Symptom Cause and ActionWiring Diagram120/127VAC50/60 HzHot/Live BlackGreenEarth/GroundNeutral WhitePower not present at keypad• Circuit breaker OFF. Turn ON breaker.• Wiring error. Check wiring to be sure it agrees with installation .Keypad has not been addressed. • See the HomeWorks Utility online help for setup details.Keypad has an address, but does not have a valid programmingdatabase. • See the HomeWorks Utility online help for programming details.Keypad is out of RF communications range.• Move RF Signal Repeater or RF Processor to within 30 feet ofkeypad.Improper programming • Check programming in HomeWorks Utility.LEDs don't light up when buttons are pressed.Button presses on keypad cause the keypad to quickly flash all itsLEDs simultaneously.Button presses on keypad cause the keypad to slowly flash all itsLEDs simultaneously.Keypad cannot be addressed.LEDs light when button is pressed, but the system response is notcorrect.
Lutron Electronics Co., Inc. 7200 Suter RoadCoopersburg, PA 18036-1299Made and printed in the U.S.A. 7/03 P/N 043-099 Rev. ALIMITED WARRANTYLutron will, at its option, repair or replace any unit that is defective in materials or manufac-ture within two years after purchase. For warranty service, return unit to place of purchase ormail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephonethe Lutron Technical Support Center toll free at 800-523-9466. After the two year period, apro-rated warranty applies to this product until eight years after the purchase. For more infor-mation regarding this warranty contact your Lutron representative.THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THEIMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING ORINSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUTOF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.This warranty gives you specific legal rights, and you may also have other rights which varyfrom state to state. Some states do not allow limitations on how long an implied warranty lasts,so the above limitation may not apply to you. Some states do not allow the exclusion or limi-tation of incidental or consequential damages, so the above limitation or exclusion may notapply to you.This product may be covered by one or more of the following U.S. patents: 4,835,343;4,889,999; 5,170,068; 5,736,965; 5,838,226; 5,848,054; 5,905,442; 5,982,103; D344,068;D378,814 and corresponding foreign patents. U.S. and foreign patents pending. Lutron,Claro, and HomeWorks are registered trademarks and Satin Colors and the HomeWorks logoare trademarks of Lutron Electronics Co., Inc.© 2003 Lutron Electronics Co., Inc.Technical and Sales AssistanceIf you need assistance, call the toll-free LutronTechnical Support Center. Please provide exactmodel number when calling.(800) 523-9466 (U.S.A., Canada and the Caribbean)Other countries call:Tel: (610) 282-3800Fax: (610) 282-3090Visit our Web site at www.lutron.comFCC InformationNote: This equipment has been tested and found to comply with the limits for a Class B digi-tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-sonable protection against harmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if not installed in accordancewith the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures: • Reorient or relocate the receiving antenna.• Increase the seperation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by Lutron Electronics Co. couldvoid the user’s authority to operate this equipment.Industry Canada InformationThe term “IC:” before the radio certification number only signifies that Industry Canada tech-nical specifications were met.

Navigation menu