Lutron Electronics 0036 Lighting Control Transceiver User Manual 043 099a

Download:
Mirror Download [FCC.gov]
Document ID	545290
Application ID	QzAnG2JhCS5b9fMAmHbEyw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	41.69kB (521077 bits)
Date Submitted	2005-05-25 00:00:00
Date Available	2005-05-25 00:00:00
Creation Date	2003-07-17 13:18:11
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-03-22 14:38:06
Document Title	043-099a.qxd
Document Creator	PScript5.dll Version 5.2
Document Author:	rlau

Installation Instructions
Designer-Style RF Slim-Button Keypads
Please Read Before Installing
HRD-5KP, -5RL, -10KP, -10RL
120 V , 0.5 A, 50/60 Hz
Overview
HRD-5KP
HRD-5RL
HRD-10KP
HRD-10RL
The HRD-5KP, -5RL, -10KP, and -10RL keypads are
for use with HomeWorks systems. The keypad buttons
are programmed with a personal computer using the
HomeWorks Utility.
Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks RF Processor.
Important Notes
Codes: Install in accordance with all local and national
electrical codes.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
Wallplates: Lutron Claro® and Satin ColorsTM wallplates
are recommended for best color match and clean aesthetic appearance. Do not paint controls or wallplates.
Cleaning: To clean, wipe with a clean damp cloth. DO
NOT use any chemical cleaning solutions.
Wallboxes: Lutron recommends using 3-1/2 in. (89 mm)
deep wallboxes for easier installation.
RF Device Placement: RF Keypads must be located
within 30 feet (9 m) of an RF Signal Repeater or an RF
Processor.
RF Keypads will not function until they are addressed
and programmed. See the HomeWorks Utility online
help.
Installation
5. Attach Lutron Claro® or Satin ColorsTM wallplate
adapter and wallplate.
1. Turn power OFF at fusebox or circuit breaker.
a. Loosely install keypad mounting screws.
Danger - Locate and remove fuse or lock circuit
breaker in the OFF position before proceeding.
Wiring with power ON may result in personal
injury.
b. Tighten wallplate adapter mounting screws
snug.
c. Tighten keypad mounting screws until
wallplate adapter is flush to wall (do not overtighten).
2. Prepare wires. When making wire connections, follow the recommended strip lengths and combinations for the supplied wire connectors. Note: Wire
connectors provided are suitable for copper wire
only.
Small:
Strip insulation 3/8 in. (10 mm) for
14 AWG (2.5 mm2).
Strip insulation 1/2 in. (13 mm) for
16 AWG (1.5 mm2).
Use to join one 14 AWG supply wire with
one 16 or 18 AWG (1.0 mm2) control
wire.
d. Snap wallplate onto wallplate adapter, and
verify that buttons are not submerged.
e. If buttons are submerged, loosen keypad
mounting screws appropriately.
6.
Restore power.
Small
3. Wiring: See Wiring Diagram (page 3).
4. Push all wires back into the wallbox and loosely fasten
the control to the wallbox using the keypad mounting
screws provided. Do not pinch the wires.
Mounting Diagram
Keypad
Mounting
Screws
Adapter
Mounting
Screws
Wallbox
Keypad
Included:
Wire Connectors (3)
Mounting Screws (2)
Wallplate and Adapter are purchased separately.
Wiring Diagram
Hot/Live
Black
Neutral
White
120/127
VAC
50/60 Hz
Green
Earth/Ground
Troubleshooting Guide
RF Keypads will not function until they are addressed and programmed. See the HomeWorks Utility online help.
Symptom
Cause and Action
LEDs don't light up when buttons are pressed.
Power not present at keypad
• Circuit breaker OFF. Turn ON breaker.
• Wiring error. Check wiring to be sure it agrees with installation .
Button presses on keypad cause the keypad to quickly flash all its
LEDs simultaneously.
Keypad has not been addressed.
• See the HomeWorks Utility online help for setup details.
Button presses on keypad cause the keypad to slowly flash all its
LEDs simultaneously.
Keypad has an address, but does not have a valid programming
database.
• See the HomeWorks Utility online help for programming details.
Keypad cannot be addressed.
Keypad is out of RF communications range.
• Move RF Signal Repeater or RF Processor to within 30 feet of
keypad.
LEDs light when button is pressed, but the system response is not
correct.
Improper programming
• Check programming in HomeWorks Utility.
FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the seperation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could
void the user’s authority to operate this equipment.
Industry Canada Information
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
Technical and Sales Assistance
If you need assistance, call the toll-free Lutron
Technical Support Center. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610) 282-3090
Visit our Web site at www.lutron.com
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 7/03 P/N 043-099 Rev. A
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture within two years after purchase. For warranty service, return unit to place of purchase or
mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone
the Lutron Technical Support Center toll free at 800-523-9466. After the two year period, a
pro-rated warranty applies to this product until eight years after the purchase. For more information regarding this warranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PURCHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,
REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,
OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR
INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,
OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.
This product may be covered by one or more of the following U.S. patents: 4,835,343;
4,889,999; 5,170,068; 5,736,965; 5,838,226; 5,848,054; 5,905,442; 5,982,103; D344,068;
D378,814 and corresponding foreign patents. U.S. and foreign patents pending. Lutron,
Claro, and HomeWorks are registered trademarks and Satin Colors and the HomeWorks logo
are trademarks of Lutron Electronics Co., Inc.
© 2003 Lutron Electronics Co., Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:07:17 13:18:11Z
Modify Date                     : 2005:03:22 14:38:06-05:00
Page Count                      : 4
Creation Date                   : 2003:07:17 13:18:11Z
Mod Date                        : 2005:03:22 14:38:06-05:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : rlau
Metadata Date                   : 2005:03:22 14:38:06-05:00
Creator                         : rlau
Title                           : 043-099a.qxd

EXIF Metadata provided by EXIF.tools