Lutron Electronics 0036 Lighting Control Transceiver User Manual 043 099a
Lutron Electronics Company Inc Lighting Control Transceiver 043 099a
Users Manual
1
Please Read Before Installing
Designer-Style RF Slim-Button Keypads
HRD-5KP, -5RL, -10KP, -10RL
120 V , 0.5 A, 50/60 Hz
Installation Instructions
Overview
The HRD-5KP, -5RL, -10KP, and -10RL keypads are
for use with HomeWorks systems. The keypad buttons
are programmed with a personal computer using the
HomeWorks Utility.
Up to 32 keypads, each with a unique address, can be
assigned to each HomeWorks RF Processor.
HRD-5KP
HRD-10KP HRD-10RL
HRD-5RL
Important Notes
Codes: Install in accordance with all local and national
electrical codes.
Environment: Ambient operating temperature:
0-40°C, 32-104°F, 0-90% humidity, non-condensing.
Indoor use only.
Wallplates: Lutron Claro®and Satin ColorsTM wallplates
are recommended for best color match and clean aes-
thetic appearance. Do not paint controls or wallplates.
Cleaning: To clean, wipe with a clean damp cloth. DO
NOT use any chemical cleaning solutions.
Wallboxes: Lutron recommends using 3-1/2 in. (89 mm)
deep wallboxes for easier installation.
RF Device Placement: RF Keypads must be located
within 30 feet (9 m) of an RF Signal Repeater or an RF
Processor.
RF Keypads will not function until they are addressed
and programmed. See the HomeWorks Utility online
help.
2
Mounting Diagram
Wallbox
Keypad
Mounting
Screws
Keypad
Adapter
Mounting
Screws
Wallplate and Adapter are purchased separately.
1. Turn power OFF at fusebox or circuit breaker.
Danger - Locate and remove fuse or lock circuit
breaker in the OFF position before proceeding.
Wiring with power ON may result in personal
injury.
2. Prepare wires. When making wire connections, fol-
low the recommended strip lengths and combina-
tions for the supplied wire connectors. Note: Wire
connectors provided are suitable for copper wire
only.
Small:
Strip insulation 3/8 in. (10 mm) for
14 AWG (2.5 mm2).
Strip insulation 1/2 in. (13 mm) for
16 AWG (1.5 mm2).
Use to join one 14 AWG supply wire with
one 16 or 18 AWG (1.0 mm2) control
wire.
3. Wiring: See Wiring Diagram (page 3).
4. Push all wires back into the wallbox and loosely fasten
the control to the wallbox using the keypad mounting
screws provided. Do not pinch the wires.
5. Attach Lutron Claro®or Satin ColorsTM wallplate
adapter and wallplate.
a. Loosely install keypad mounting screws.
b. Tighten wallplate adapter mounting screws
snug.
c. Tighten keypad mounting screws until
wallplate adapter is flush to wall (do not over-
tighten).
d. Snap wallplate onto wallplate adapter, and
verify that buttons are not submerged.
e. If buttons are submerged, loosen keypad
mounting screws appropriately.
6. Restore power.
Included:
Wire Connectors (3)
Mounting Screws (2)
Installation
Small
3
Troubleshooting Guide
RF Keypads will not function until they are addressed and programmed. See the HomeWorks Utility online help.
Symptom Cause and Action
Wiring Diagram
120/127
VAC
50/60 Hz
Hot/Live Black
Green
Earth/Ground
Neutral White
Power not present at keypad
• Circuit breaker OFF. Turn ON breaker.
• Wiring error. Check wiring to be sure it agrees with installation .
Keypad has not been addressed.
• See the HomeWorks Utility online help for setup details.
Keypad has an address, but does not have a valid programming
database.
• See the HomeWorks Utility online help for programming details.
Keypad is out of RF communications range.
• Move RF Signal Repeater or RF Processor to within 30 feet of
keypad.
Improper programming
• Check programming in HomeWorks Utility.
LEDs don't light up when buttons are pressed.
Button presses on keypad cause the keypad to quickly flash all its
LEDs simultaneously.
Button presses on keypad cause the keypad to slowly flash all its
LEDs simultaneously.
Keypad cannot be addressed.
LEDs light when button is pressed, but the system response is not
correct.
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
Made and printed in the U.S.A. 7/03 P/N 043-099 Rev. A
LIMITED WARRANTY
Lutron will, at its option, repair or replace any unit that is defective in materials or manufac-
ture within two years after purchase. For warranty service, return unit to place of purchase or
mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid. Telephone
the Lutron Technical Support Center toll free at 800-523-9466. After the two year period, a
pro-rated warranty applies to this product until eight years after the purchase. For more infor-
mation regarding this warranty contact your Lutron representative.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE
IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO TWO YEARS FROM PUR-
CHASE. THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION,
REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE,
OR IMPROPER OR INCORRECT REPAIR, OR DAMAGE FROM IMPROPER WIRING OR
INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES. LUTRON’S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT
OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY,
OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. Some states do not allow limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. Some states do not allow the exclusion or limi-
tation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.
This product may be covered by one or more of the following U.S. patents: 4,835,343;
4,889,999; 5,170,068; 5,736,965; 5,838,226; 5,848,054; 5,905,442; 5,982,103; D344,068;
D378,814 and corresponding foreign patents. U.S. and foreign patents pending. Lutron,
Claro, and HomeWorks are registered trademarks and Satin Colors and the HomeWorks logo
are trademarks of Lutron Electronics Co., Inc.
© 2003 Lutron Electronics Co., Inc.
Technical and Sales Assistance
If you need assistance, call the toll-free Lutron
Technical Support Center. Please provide exact
model number when calling.
(800) 523-9466 (U.S.A., Canada and the Caribbean)
Other countries call:
Tel: (610) 282-3800
Fax: (610) 282-3090
Visit our Web site at www.lutron.com
FCC Information
Note: This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the seperation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by Lutron Electronics Co. could
void the user’s authority to operate this equipment.
Industry Canada Information
The term “IC:” before the radio certification number only signifies that Industry Canada tech-
nical specifications were met.