Lutron Electronics 0039 Wireless Roller 64 for HomeWorks User Manual
Lutron Electronics Company Inc Wireless Roller 64 for HomeWorks master
a href="https://usermanual.wiki/Lutron-Electronics" itemprop="url">
Lutron Electronics >
Users Manual
![Sivoia QED™Wireless Roller 64™for HomeWorks®InstallationInstructions](https://usermanual.wiki/Lutron-Electronics/0039/User-Guide-659799-Page-1.png)
![Sivoia QEDTM |Wireless Roller 64 for HomeWorksInstallation InstructionsSIVOIA QEDTM Wireless Roller 64 Installation Instructions 1Tools Required:Tape Measure 1/4” Hex-Head DriverWire Cutter/Stripper LevelPliers Power Drill#2 Phillips ScrewdriverSivoia QED™Wireless Roller 64Standard Mounting Brackets with Retaining Screws(5) Mounting Screws (#8x1-3/4" (#8x44mm) Hex Head Screws)(1) 3 Pin Terminal Block(Actual Size)(1) Programming Stylus (1) Screwdriver(2) 4” (102mm) Cable TiesNotes:1) For Wireless Roller 64 programming refer to the HomeWorks®Illumination Online Help.2) The Electronic Drive Unit (EDU) will need to be powered to complete installation. Wireless Shades will not function until they are addressed and programmed using the HomeWorks®Illumination Software.Box Contents:(2) Bracket Leveling Spacer (2) Cable Tie Anchor(2) AntennaMounting Clips](https://usermanual.wiki/Lutron-Electronics/0039/User-Guide-659799-Page-2.png)