Lutron Electronics 0075 Remote Control User Manual
Lutron Electronics Company Inc Remote Control
Contents
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2113691 |
| Application ID | jLNA4YK/7WbdWF9c3XaoAQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.08kB (650945 bits) |
| Date Submitted | 2013-11-07 00:00:00 |
| Date Available | 2013-11-07 00:00:00 |
| Creation Date | 2013-09-17 15:30:13 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2013-10-30 11:50:09 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Windows) |
Pico® Wireless Control with Nightlight English 3 V- 10 mA Mounting accessories sold separately. For a complete listing of PicoR wireless mounting accessories, please visit www.lutron.com/pico Installing the Battery in a PicoR Wireless Control with Nightlight Operation Indicator LED Flashes to indicate a button press or when unit is in programming mode. 1. Place a flathead screwdriver into the slot at the bottom of the PicoR wireless control. Twist to open. DO NOT press buttons without back enclosure on. ON Button Lights brighten to full intensity. 2. Slide a new battery underneath the contact strap, with the (-) terminal toward the front of the PicoR wireless control. PJN-2B Nightlight Glows a soft green color. 3. Replace the back enclosure. PJN-3BRL OFF Button Lights dim to off. 4. If installing a new battery, proceed to Set-up. If replacing the battery, confirm proper installation by turning the receiving device on and off using the PicoR wireless control. Important Notes Please Read Before Installing 1. This install guide provides simple setup instructions for Maestro WirelessR systems only. If you are using your PicoR wireless control with any other LutronR system, please refer to the system setup guide. If you no longer have your system setup guide, please download the latest version by following the links at www.lutron.com/pico 2. The PicoR wireless control uses one (1) CR2032 battery. DO NOT use rechargeable batteries. Using improper batteries could damage the PicoR wireless control. DO NOT dispose of the battery in normal household waste. Please recycle it by taking it to a proper battery disposal facility, or contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. WARNING: Risk of fire, explosion and burns. May result in serious injury or death. DO NOT recharge, disassemble, crush, puncture, heat above 212 °F (100 °C) or incinerate the battery. The battery in this device contains Perchlorate Material - special handling may apply. For more information visit www.dtsc.ca.gov/hazardouswaste/perchlorate 3. The PicoR wireless control must be paired with dimmer(s) /switch(es) before it can communicate. 4. Up to 10 PicoR wireless controls can be configured to work together in a Maestro WirelessR system. 5. The range of the PicoR wireless control is 30 ft (9 m). Performance is highly dependent on a variety of complex factors such as: Set-Up (for Maestro WirelessR systems only) Technical Assistance If multiple wireless dimmers/switches are paired with the same PicoR wireless control, they will perform as follows: World Headquarters ) P ressing the ON button on the PicoR wireless control will cause all dimmers/switches to turn ON fully. Important: Set up a PicoR wireless control to a dimmer/switch before use. ressing the OFF button on the PicoR wireless control will cause all ) P dimmers/switches to turn OFF completely. 1. Press and hold the dimmer/switch tap button (Figure 1) for approximately 6 seconds. Once the LED(s) start to blink slowly, release the tap button. 2. Press and hold the OFF button on the PicoR wireless control (Figure 2) for approximately 6 seconds. 3. Once the dimmer/switch pairs with the PicoR wireless control, the LED(s) on the dimmer/switch and the load will flash 3 times and it will exit Set-Up mode. 4. Repeat steps 1 to 3 to pair multiple PicoR wireless controls with a single dimmer / switch. Repeat steps 1 to 3 to pair a single PicoR wireless control with multiple dimmers / switches. 5. Pressing the Preset button (-3BRL model only) on a PicoR wireless control will cause all dimmers to go to the favorite light settings. Switches can be configured to turn ON or OFF. To save a favorite light setting, adjust all the dimmers/switches controlled by a PicoR wireless control to the desired light setting. Then press and hold the Preset button on the PicoR wireless control for 6 seconds until all LEDs on the dimmers/switches flash several times. ) Distance between system components ) P ressing the Raise button (-3BRL model only) on a PicoR wireless control will cause all dimmers to turn ON and gradually increase in intensity. ) P ressing the Lower button (-3BRL model only) on a PicoR wireless control will cause all dimmers to gradually decrease in intensity. The dimmers will not turn off and will remain at low-end. ) P ressing the Preset button (-3BRL model only) on a PicoR wireless control will cause all dimmers to return to the favorite light settings. Switches can be configured to go to ON or OFF. (See Step 5 in Set-Up) Un-pairing a PicoR Wireless Control (for Maestro WirelessR systems only) To un-pair a previously paired PicoR wireless control from your system, tap the OFF button (Figure 2) on the PicoR wireless control three times, on the third tap hold for 6 seconds and then tap three more times. This will remove all dimmers/switches it was previously paired with. ) Construction of walls separating system components ) Electrical equipment located near system components FCC/IC Information: Asia Technical Hotlines Northern China 10.800.712.1536 Southern China 10.800.120.1536 Hong Kong 800.901.849 India +91.11.4051.4300 Indonesia 001.803.011.3994 Japan +81.3.5575.8411 Macau 0800.401 Singapore 800.120.4491 Taiwan 00.801.137.737 Thailand 001.800.120.665853 Other countries +65.6220.4666 http://www.lutron.com/en-US/ Products/Documents/Components/ PicoWirelessController/FCC.html Singapore TEL +65.6220.4666 FAX +65.6220.4333 Light does not respond to PicoR wireless control • The dimmer/switch failed to pair with PicoR wireless control; see Set-Up. • The dimmer/switch has already received and responded to a command or is already at the light setting the PicoR wireless control is sending. • The PicoR wireless control is outside the 30 ft (9 m) operating range. • The battery in the PicoR wireless control is low. • The battery in the PicoR wireless control is installed incorrectly. When in set-up mode • The maximum number of PicoR wireless controls or sensors have been paired with the dimmer/switch. More PicoR the LEDs on the dimmer/ wireless controls or sensors can not be added. See Un-pairing a PicoR Wireless Control. switch flash when trying to setup with the PicoR wireless control or sensor. Figure 1 P/N 040399 Rev. A 09/2013 Asian Headquarters United Kingdom Lutron EA Ltd. TEL: +44.(0)20.7702.0657 FAX: +44.(0)20.7480.6899 Technical Support: +44.(0)20.7680.4481 Freephone: 0800.282.107 www.lutron.com/europe Possible Causes 7. DO NOT paint the PicoR wireless control. Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299 European Headquarters Symptoms 6. Clean PicoR wireless control with a soft damp cloth only. DO NOT use any chemical cleaners. 8. DO NOT mount the PicoR wireless control to a metal surface. www.lutron.com For questions concerning the installation or operation of this product, call the Lutron Technical Support Center. Please provide exact model number when calling. TEL +1.610.282.3800 FAX +1.610.282.1243 Toll Free 1.888.LUTRON1 USA, Canada, Caribbean 1.800.523.9466 Mexico +1.888.235.2910 Central/South America +1.610.282.6701 Troubleshooting ) Geometry of the building structure Preset Button (-3BRL model only) Tap Once: Devices go to preset levels. Press and Hold: To save new preset level or position, press and hold for 6 seconds. Lower Button (-3BRL model only) Lights decrease in intensity. Wireless Control of Multiple Switches To communicate with other systems or devices, including Radio RAR 2, QS sensor module (QSM), QuantumR, and HomeWorksR QS, refer to the system setup guides. See www.lutron.com/pico for more information. Raise Button (-3BRL model only) Lights increase in intensity. Figure 2 Nightlight LED on the PicoR wireless control is not illuminated • The battery in the PicoR wireless control is installed incorrectly. • The battery in the PicoR wireless control is low and needs to be replaced. Lutron, ), HomeWorks, Pico, Maestro Wireless, RadioRA, and Quantum are registered trademarks and RadioRA 2 is a trademark of Lutron Electronics Co., Inc. © 2013 Lutron Electronics Co., Inc. ®
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Create Date : 2013:09:17 15:30:13-04:00 Metadata Date : 2013:10:30 11:50:09-04:00 Modify Date : 2013:10:30 11:50:09-04:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:5cdb54a9-e551-43a8-9a9c-5627f7ffdd0d Original Document ID : xmp.did:23D2F6B18C0DE211AEFDF8DB54F5ED68 Document ID : xmp.id:01E96E8ECF1FE311B267F119266721BF Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:00E96E8ECF1FE311B267F119266721BF Derived From Document ID : xmp.did:68F7A72A0B1FE31190FED9FD0DBF335A Derived From Original Document ID: xmp.did:23D2F6B18C0DE211AEFDF8DB54F5ED68 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2013:09:17 15:30:13-04:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 1 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools