Lutron Electronics 0078 Low Power Transceiver User Manual
Lutron Electronics Company Inc Low Power Transceiver
Contents
- 1. User Manual
- 2. Warranty and FCC Information
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1444336 |
| Application ID | saCs2uAT630R3lDDCoOECA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 79.2kB (989974 bits) |
| Date Submitted | 2011-04-06 00:00:00 |
| Date Available | 2011-04-06 00:00:00 |
| Creation Date | 2011-03-01 11:26:34 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2011-03-18 08:46:18 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS3 (5.0.4) |
English Installation Dynamic Keypads Installation Instructions Please Read Before Installing HQ-J-DK420-WH (434 MHz) HQ-J-DK420-BL (434 MHz) 24 V- 113 mA IEC PELV / NECR Class 2 Typical Power Consumption*: 1.5 W Troubleshooting Guide Symptom Probable Cause and Action Backlight does not turn on when screen is touched. Nothing is displayed on the screen. Power not present at keypad • Circuit breaker OFF. Turn ON breaker. Blue Lutron® screen with “Maintenance” or “Startup failure” at the bottom. Startup failure. • Cycle power to the device. If symptom persists, contact Lutron Technical Support. The Dynamic Keypad does not control dimmers, shades or other system devices. All LEDs on the keypad flash when any button is pressed. • The device is in the Factory Default Settings mode and has not been activated into the system. Use the HomeWorks QS software to verify activation or re-active the device and transfer its database. Included in box Measurements shown as: in (mm) 2 3⁄8 2 ⁄4 (57) 1/2 (13) (60) � Do not gang IEC PELV / NEC Class 2 cable only. Maximum 1000 ft (305 m) 72 72 72 3/8 in (10 mm) Approximately 54 in (1.4 m) 5 1⁄8 (130) Incorrect wiring. • Wire the keypad according to the Installation section. Device is not communicating with the system. • Device is out of range of an RF signal repeater. Device is not properly programmed. • Program the device using the HomeWorks QS software RF 1/4 (6) to 1 (25) Required for Installation (Not Included) 120 V~ Wired OR 90˚ Power Supply* 1 ⁄8 (41) 24 V- MUX MUX The device is in the Factory Default mode and has not been activated into the system. • Use the HomeWorks QS software to verify activation or re-active the device and transfer its database. The Dynamic Keypad does not enter addressing mode. The Dynamic Keypad is not configured for RF communication. • Use the information screen on the Dynamic Keypad to verify that it is configured for RF communication. • Ensure MUX (pin 3) and MUX (pin 4) are not connected. The Dynamic Keypad does not snap onto the mounting frame as indicated in step 6c. The mounting frame screws may be too tight (Step 3B & 3D). • Remove the Dynamic Keypad, loosen the mounting frame screws and repeat step 6. +24 V COM *The Dynamic Keypad consumes 6 PDUs. For more information, see the Dynamic Keypad Spec Sheet (Part # 369294). 2B 2A 4 ⁄4 (108) +24 V Important Notes Terminals will accept one or two 22 AWG (0.5 mm() or 18 AWG (1.0 mm2) wires. COM Environment: Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0 to 90% humidity, non-condensing. Indoor use only. Returning Dynamic Keypads to Factory Settings NOTICE: Do NOT connect to line / mains voltage. Cleaning: To clean, wipe with a clean damp cloth. Do not use any chemical cleaning solutions. RF Device Placement: RF devices must be located within 30 ft (9 m) of an RF signal repeater. Mounting frame: A custom mounting frame is included with the Dynamic Keypad. Only use the screws provided with the mounting frame. All LEDs on the keypad flash when any button is pressed. Step 1: T riple tap any button, below the screen, on the Dynamic Keypad. DO NOT release after third tap. Step 2: K eep the button pressed on the third tap until all the buttons start to flash slowly (approximately 3 seconds). 6A � Returning Dynamic Keypads to Factory Settings will remove them from the system and erase all programming. Step 3: Immediately release the button and triple tap the button again. The buttons on the Dynamic Keypad will flash quickly. 3A The Dynamic Keypad has now been returned to Factory Settings. Removing Dynamic Keypads Note: Mounting frame is visible after installation. Do NOT paint or damage visible surface. 90˚ 3B 3C 6B 6C Click *Typical Power Consumption test conditions: LCD backlight on at 80%, buttons backlight on at 28%, normal standby mode. Technical Assistance: U.S.A. / Canada: 1.800.523.9466 Mexico: +1.888.235.2910 Other Countries: +1.610.282.3800 24 hours a day, 7 days a week. Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299 Printed in the U.S.A. 03/11 P/N 043-376 Rev. A 3D NEC is a registered trademark of the National Fire Protection Association, Quincy, Massachusetts. Lutron, HomeWorks, and the sunburst logo are registered trademarks of Lutron Electronics Co., Inc. ©2011 Lutron Electronics Co., Inc. Warranty: For warranty information, please see the Warranty enclosed with the product, or visit www.lutron.com/resiinfo
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2011:03:01 11:26:34-05:00 Creator : Adobe InDesign CS3 (5.0.4) Modify Date : 2011:03:18 08:46:18-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Instance ID : uuid:0e11329f-cece-4ad2-bc63-5dd1adfe6e4b Document ID : adobe:docid:indd:2413e6ed-90d3-11df-9907-bd9614161395 Rendition Class : proof:pdf Derived From Instance ID : 2f2ef891-3368-11df-90ad-b365fb737e7c Derived From Document ID : adobe:docid:indd:8bd5d0ee-de98-11de-9064-c77a93a52662 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:BAAFFA056040E011B10B99E39B865485, uuid:51AD65F5BE24E0118053F22F7C5AA1C7, uuid:A8970B1D7FC1DE119865B7819D77074C, uuid:2CB3F62A1B44E011A19AA21729026DC9, uuid:2DB3F62A1B44E011A19AA21729026DC9, uuid:9CC076941923E011B01BC8C014D14221, uuid:A0757A72981AE011B4B58CF8A42E427B, uuid:FF04D9EDDD3AE01180D5E9BE975E4D3A, uuid:F20C12A4911AE011B4B58CF8A42E427B, uuid:FE04D9EDDD3AE01180D5E9BE975E4D3A, uuid:C59B4F1A781EE01187A9BB79B8833F02, uuid:48E4AA923F2EE01184CD8FC0E17826EC, uuid:499988C9182EE01184CD8FC0E17826EC, uuid:479988C9182EE01184CD8FC0E17826EC, uuid:078F4F8B0D29DE11AA75F93B5DFAB491, uuid:4574727B2A1DDD11B164F7C8A567920E, uuid:4774727B2A1DDD11B164F7C8A567920E Manifest Reference Document ID : uuid:86B09FCAD50DE011AC16AE2A8B83B9FB, uuid:C2588EB7D20EE011A96685C9841FC029, uuid:A7970B1D7FC1DE119865B7819D77074C, uuid:2C6D410118AADF119A70E022C7DA1EE1, uuid:910378A13A0DE011A599E18B98E09166, uuid:BD588EB7D20EE011A96685C9841FC029, uuid:1F432766E70DE011AC16AE2A8B83B9FB, uuid:64854BFECE19E011A53EE36C1E918872, uuid:B3EC5E66CF90DF119158BB669F02DAEC, uuid:2E91F901BB0EE011A96685C9841FC029, uuid:46386A72811AE011B4B58CF8A42E427B, uuid:8CB58A396322E0118F5085A08F6C7AC0, uuid:2C98418EF728DE11AA75F93B5DFAB491, uuid:595763A5260ADD118FA4DA6B49EE8EB7, uuid:068F4F8B0D29DE11AA75F93B5DFAB491, uuid:595763A5260ADD118FA4DA6B49EE8EB7, uuid:595763A5260ADD118FA4DA6B49EE8EB7 Metadata Date : 2011:03:18 08:46:18-04:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 12044 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 1EXIF Metadata provided by EXIF.tools