Lutron Electronics 0090 Shadow Sensor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1841072
Application ID	OtNPi7+zm4XVpvvSZsj21A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	33.13kB (414183 bits)
Date Submitted	2012-11-19 00:00:00
Date Available	2012-11-19 00:00:00
Creation Date	2012-10-22 16:21:45
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2012-10-22 16:21:53
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

Radio Shadow Sensor™
Installation Instructions
Please Read Before Installing
English
Wireless Battery-Powered
Window sensor
LRF2-SSW 3 V
Install
a sensor in as
Shadow
Sensor
™
Instructions Radio
little as 15 minutes.
Instructions d’installation
Veuillez les lire avant toute installation
Getting Started: Sans fil détecteur de
Key Features
Gettin
NOTE: Before setting up the sensor, the corr
Management System should be installed. Re
fenêtre piles
• Easy Installation. No wiring required.
LRF2-SSW 3 V
7 µA 434 MHz
• Easy Set-Up. Default settings are ideal for most situations. Simple and intuitive adjustments
Produits compatibles/
available.
7 µA 434 MHz
Compatible Products
informations
supplémentaires
• Low Maintenance. 10-year battery
life.
For a full list of compatible products
visit www.lutron.com
FRONT VIEW
Product Description
Use to
test system
functionality
Lutron’s Radio Frequency-Enabled Radio
Shadow Sensor enhances the performance
of Hyperion™ solar-adaptive shading
systems when direct sunlight is being
blocked by external means. This sensor
maximizes natural daylight, available views
and occupant comfort when shadows
are cast on buildings or cloudy conditions
prevail. The sensor works at the window
level to communicate current exterior light
conditions to the Quantum® Total Light
Management System, enabling Hyperion to
respond appropriately, improve occupant
comfort and enhance the system’s energysaving potential. The battery-powered
sensor features easy installation and low
maintenance costs.
Install Battery Instr
A Français
Pour une liste complète de nos produits
compatibles et toute REAR
autre information
VIEW w/COVER REMOVED
supplémentaire, consulter le site www.lutron.com/
occsensors
Battery
compartment
Description du produit
Lutron’s Radio Frequency-Enabled Radio
Shadow Sensor enhances the performance
of Hyperion™ solar-adaptive shading
systems when direct sunlight is being
Battery means. This sensor
blocked by external
compartment
maximizes
natural daylight, available views
door
and occupant comfort when shadows
Use laser
Use toon
linkbuildings or cloudy conditions
to link
are cast
to system
to system
prevail.
The sensor works at the window
level to communicate current exterior light
conditions to the Quantum® Total Light
Sensor Operation:
Management System, enabling Hyperion to
Hyperion solar-adaptive shading technology automatically positions shades based on the
respond appropriately, improve occupant
position of the sun. The Radio Shadow Sensor will monitor exterior lighting conditions and
comfort and enhance the system’s energyoverride Hyperion when shadows are cast by clouds or neighboring buildings, and re-enable
saving potential. The battery-powered
Hyperion when sunlight returns.
sensor features easy installation and low
maintenance costs.
Use only high-quality lithium batteries,
oneFe
(1
Key
IEC-CR2450). DO NOT use rechargeable
ba
• Easy Ins
damage the sensor.
• Easy Se
NOTICE: DO NOT disassemble, crush,
pun
available
batteries in normal household waste. Please
•
Low
Ma
or contact your local waste disposal provider
recycling of batteries.
WARNING: Keep battery out of reac
medical help as serious injury may
Use to
(202) 625-3333, collect. test system
functionality
California residents:
The batteries in these devices contain Perchl
more information visit www.dtsc.ca.gov/haza
Remove the sensor’s back cover by p
Use laser
to link
to system
Sensor
Hyperion s
position of
override H
Hyperion w
How it works:
Easy-to-follow
Instructions
How it
Instructions
• This battery powered photo sensor reports
the measured amount of natural light incident on
a facade to Quantum using Lutron Clearfaciles
Connect Technology.
à suivre
• Enables Quantum to override Hyperion by moving shades to an opened visor position when
outdoor conditions indicate shadows from clouds or other obstructions.
P/N 045-379
Important Notes
Technical Assistance
For questions concerning the installation or operation of this product, call the
Lutron Technical Support Center. Please provide exact model number when calling.
U.S.A. and Canada (24 hrs / 7 days)
1.800.523.9466
Fax +1.610.282.6311
P/N 045-379
• This bat
a facade
• Enables
outdoor
Swing open the battery door. Insert b
Import
Support technique
1.
This sensor is part of a system and cannot be used to control a load or shade without
vousLight
avezManagement
des questions
concernant
l’installation
ou le fonctionnement de ce produit, veuillez
a compatible Lutron QuantumSiTotal
System
with Hyperion
Solar
le Centre
de soutien
technique
Lutron.
Veuillez fournir le numéro de modèle exact
Adaptive Technology. Refer toappeler
the instruction
sheets
of the receiving
devices
for installation
lorsofdethis
votre
appel.
information on setup and testing
sensor.
1.
This s
a com
Adapt
inform
2.
Clean sensor with a soft damp
cloth only.
DO NOT
any/chemical
États-Unis
et Canada
(24use
heurs
7 jours) cleaners.
Brésil (Lundi-Vendredi 8:30 h à 17:30 h BRT)
2.
Clean
3.
For ind
4.
DO N
Mexico 8am – 8pm ET
+1.888.235.2910
3.
1.800.523.9466
For indoor use only. Operate between
32 °F and 122 °F (0 °C and 50 °C).
4.
DO NOT paint sensor.
Other countries 8am – 8pm ET
+1.610.282.3800 www.lutron.com
5.
Mexico de 8 h à 20 h EST
+55 (11) 3257-6745
+1.888.235.2910
Télécopieur
(ANSI-5029LC,
Use only high-quality lithium batteries,
one (1) size CR2450, 3 V
IEC-CR2450). DO NOT use rechargeable
Using
improperly rated batteries
Autres paysbatteries.
de 8 h à 20
h EST
could damage the sensor.
+1.610.282.6311
5.
Use o
IEC-C
could
+1.610.282.3800
www.lutron.comSwing the battery door closed and
ge
NOTICE: DO NOT disassemble, crush, puncture, or incinerate batteries. DO NOT dispose of
NOTICE: D
batteries in normal household waste. Please recycle, take to a proper battery disposal facility,
batteries in
or contact your local waste disposal
provider regarding
local
on the disposal or
or contact
Information
de
larestrictions
FCC/ IC
recycling of batteries.
recycling o
Ce dispositif est conforme à la section 15 des règlements du FCC et des standards CNR
exempt de licence d’Industrie Canada. L’opération est sous réserve des deux conditions
WARNING: Keep battery out of reach of children. If swallowed, immediately seek
suivantes : (1) Cet appareil ne peut causer d’interférence nuisible, et (2) Cet appareil doit tolérer
medical help as serious injury may occur. Have doctor phone 24-hour hotline at
toute interférence, même celle pouvant affecter son fonctionnement. Tout changement ou
(202) 625-3333, collect.
(2
modification sans l’autorisation expresse de Lutron Electronics Co., Inc. pourrait annuler le
droit d’utiliser cet équipement.
6. California residents:
6. Califo
The batteries in these devices contain Perchlorate Material–special handling may apply.
The b
REMARQUE : Cet équipement a été testé et jugé conforme aux limites applicables aux
For more information visit www.dtsc.ca.gov/hazardouswaste/perchlorate.
For m
dispositifs numériques Classe B, conformément à la section 15 des règles de la FCC. Ces
sont
conçues
pourdependent
procurer une
protection
7. The range and performance oflimites
the RF
system
is highly
on a
variety ofraisonnable
complex contre les perturbations
7. The ra
nuisibles en application résidentielle. Cet équipement génère, utilise et peut radier l’énergie de
factors such as:
factor
fréquences radiophoniques. S’il n’est pas installé et utilisé selon les directives, peut causer des
• Distance between system components
• Dista
interférences radiophoniques nuisibles. Cependant, il n’y a aucune garantie à l’effet qu’aucune
• Geometry of the building structure
• Geo
Align
the
arrow
on
the
inside
of
interférence
se produira dans une installation précise. Si votre équipement produit de
• Construction of walls separating
system ne
components
•the
Conb
sensor
and
reinstall
the
back
cover.
la réception radiophonique ou télévisuelle, ce qui peut être détecté en coupant
• Electrical equipment locatedl’interférence
near system àcomponents
• Elec
et refermant l’alimentation au système d’éclairage. Dans le cas d’interférence, l’utilisateur sera
WARNING: Entrapment hazard.
Tod’essayer
avoid the de
riskcorriger
of entrapment
this par
product
contraint
la situation
un oumust
plusieurs des moyens suivants :
not be used to control equipment which could create hazardous situations, such
no
Réorienter ou
re-localiser
l’antenne de
réception
as entrapment, if operated• accidentally.
Examples
of equipment
which
must not be
as
• include
Augmenter
séparant
l’équipement
le récepteur
controlled with this product
(but la
aredistance
not limited
to) motorized
gates,etgarage
co
• Accidental
Brancher l’équipement
circuit
différent que
doors, industrial doors, etc.
operation of sur
the un
above
equipment
with celui
this sur lequel le récepteur est branché
do
• Demander
product could result in serious
injury or l’aide
death.du distributeur ou d’un technicien expérimenté en radio et télévision
pr
FCC/ IC Information
This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference, including interference that may
cause undesired operation. Modifications not expressly approved by Lutron Electronics Co.,
Inc. could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Garantie limitée
Limited Warranty
(valable seulement aux É.-U., au Canada, à Porto Rico et dans les Caraïbes)
(Valid only in U.S.A., Canada, Puerto Rico, and the Caribbean.)
Lutron réparera ou remplacera, à sa discrétion, tout équipement jugé défectueux quant aux matériaux ou à la fabrication durant un an à compter de la da
Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture within one year after purchase. For warranty service, return unit to place of purchase or mail
Lutron
at Rd.,
7200Coopersburg,
Suter Rd., Coopersburg,
PA 18036-1299, postage pre-paid.
au to
7200
Suter
PA 18036-1299.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES, AND THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO ONE YEAR FROM PURCHASE. THIS WARRANTY
DOES NOT
COVER
COST OF INSTALLATION,
CETTE GARANTIE
TIENT
LIEUTHE
ET REMPLACE
TOUTE AUTREREMOVAL
GARANTIEOR
EXPRESSE, ET LA GARANTIE TACITE DE QUALITÉ MARCHANDE A UNE DUR
REINSTALLATION, OR DAMAGE RESULTING FROM MISUSE, ABUSE, OR DAMAGE FROM IMPROPER WIRING OR INSTALLATION. THIS WARRANTY DOES NOT COVER INCIDENTAL OR
DAMAGES. LUTRON’S
LIABILITY
ON ANY
CLAIM FOR
DE CONSEQUENTIAL
RETRAIT OU DE RÉINSTALLATION,
NI LES
DOMMAGES
RÉSULTANT
D’UN MAUVAIS USAGE OU D’ABUS, NI LES DÉGÂTS PROVOQUÉS PAR UN
DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY, OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICEACCIDENTELS
OF THE UNIT. OU INDIRECTS. LA RESPONSABILITÉ DE LUTRON POUR LES RÉCLAMATIONS CONCERNANT DES DOMMAGES PROVENANT DE, OU EN
This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages,
or
limitation
on
how
long
an
implied
warranty
may
last,
so
the
NE POURRA JAMAIS DÉPASSER LE MONTANT D’ACHAT DE L’ÉQUIPEMENT.
above limitations may not apply to you. Lutron, Maestro Wireless, Grafik Eye and the Sunburst logo are registered trademarks and Radio Powr Savr is a trademark of Lutron ElectronicsCette
Co., Inc.
ANSI is
a registered
trademark
of the American
National
Standards
garantie
vous
accorde des
droits juridiques
précis et
vous pouvez
disposer d’autres droits qui varient d’un État à l’autre. Certains États n’autoris
Institute. IEC is a trademark of the International Electrotechnical Commission. 3M and Command are trademarks of 3M Company. © 2010 Lutron Electronics Co., Inc.
de la garantie tacite ; les limitations ci-dessus peuvent ne pas vous concerner.
®
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, U.S.A.
Made and printed in the U.S.A. 10/12 P/N 045-379 Rev. A
®
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299, États-Unis
10/12 P/N 045-379 Rev. A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Creator Tool                    : Adobe InDesign CS6 (Windows)
Create Date                     : 2012:10:22 16:21:45-04:00
Metadata Date                   : 2012:10:22 16:21:53-04:00
Modify Date                     : 2012:10:22 16:21:53-04:00
Instance ID                     : uuid:c96485db-cfb3-4fa2-a390-dd518d878005
Original Document ID            : xmp.did:D0D30307841CE21189848173A66DD57A
Document ID                     : xmp.id:65BFCFDB841CE21189848173A66DD57A
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2012:10:22 16:21:45-04:00
Derived From Instance ID        : xmp.iid:D0D30307841CE21189848173A66DD57A
Derived From Document ID        : xmp.did:D0D30307841CE21189848173A66DD57A
Derived From Original Document ID: xmp.did:D0D30307841CE21189848173A66DD57A
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools