META System S p A T2PLUS OBD device (On Board Diagnostic device) with Bluetooth 4.0 low energy User Manual 5040XXXXXX Ist Mon T 2 EN indd

Download:
Mirror Download [FCC.gov]
Document ID	2819414
Application ID	f+w1m+6k5yUiUkx4EcqFEg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.18kB (152224 bits)
Date Submitted	2015-11-23 00:00:00
Date Available	2015-11-25 00:00:00
Creation Date	2015-11-03 09:56:54
Producing Software	Acrobat Distiller 9.4.6 (Macintosh)
Document Lastmod	2015-11-03 09:56:54
Document Title	5040XXXXXX Ist.Mon.T.2+-EN.indd
Document Creator	Adobe InDesign CS5 (7.0.4)
Document Author:	ggandolfi

5040XXXXXX
T.2+ INSTALLATION MANUAL
KIT COMPOSITION
EN
TECHNICAL SPECIFICATIONS
Power Supply: ..................................................................................12Vdc (9V-14V)
Working temperature: ..........................................................from -30°C to +80°C
IP: .....................................................................................................................................40
Application classification: ...........................................passenger compartment
TELEMATIC CONTROL UNIT
WARNINGS
• ALL INSTALLATION OPERATIONS MUST BE CARRIED OUT WITH THE MOTOR OFF.
• Before starting installation, detect the OBD port location referring to the use and maintenance manual of the
vehicle.
• If the OBD connector should be used for other purpose, such as maintenance, remove T2+ and, after temporary operation, reconnect the T2+ to OBD connector.
• Strictly comply with operations indicated in this manual.
• Installation staff are not authorised to remove warranty seals and/or access the inside of the product.
• The device must be connected to OBD port on board to the vehicle, provided with protected power supply
by means a 5 A fuse maxiumum activation current.
• The manufacturer assumes no responsibility for damages caused to property and/or people, caused
by the incorrect installation of the product.
INSTALLATION
By using user manual of the vehicle find
the OBD connector on your car.
Typically OBD plug can be located:
• near the breaks unit
• near the fuse box
• under the dashboard
• in the middle console
OBD PORT
Plug the connector into the vehicle’s OBD.
2a
Check that the device is fully
connected and does not unlock.
2b
Lock the Secondary Lock to secure the device.
2c
REMOVING THE PRODUCT
Unlock the Secondary Lock to release the device.
Remove the device.
3a
3b
STANDARDS APPLICABLE TO THE VEHICLE
The instructions in this manual do not refer to specific vehicle models but apply to all vehicles in general. Any
information provided by Meta System regarding a type (model) of vehicle is to be considered purely indicative.
Installation, positioning, product securing and electrical connections, and possibly the removal, must be carried
out in a workmanlike manner on each motor vehicle. The installer is obliged to and bears responsibility for carefully verifying the individual vehicle model on which operations are carried out. Failure to comply with that
stipulated above can render the warranty of the device null and void.
APPROVAL
Hereby, Meta System S.p.A., declares that this T.2+ is in compliance with the essential requirements and other
relevant provisions of Directive R&TTE (1999/5).
The declaration of conformity may be consulted at http://docs.metasystem.it
FCC APPROVAL
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
LEGENDA
: Conformity mark to European certification.
: Identification number of identify body.
: Direct current of power supply.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : ggandolfi
Create Date                     : 2015:11:03 09:56:54+01:00
Modify Date                     : 2015:11:03 09:56:54+01:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Creator Tool                    : Adobe InDesign CS5 (7.0.4)
Format                          : application/pdf
Title                           : 5040XXXXXX Ist.Mon.T.2+-EN.indd
Creator                         : ggandolfi
Producer                        : Acrobat Distiller 9.4.6 (Macintosh)
Document ID                     : uuid:c2df175f-2d95-8046-b825-40508bf862b9
Instance ID                     : uuid:6a140e71-6268-9b40-936f-ef145665170c
Page Count                      : 2

EXIF Metadata provided by EXIF.tools