MINEW TECHNOLOGIES E6 Digital Broadcasting Device (Light sensor beacon) User Manual

SHENZHEN MINEW TECHNOLOGIES CO., LTD. Digital Broadcasting Device (Light sensor beacon) Users Manual

Manual

Download: MINEW TECHNOLOGIES E6 Digital Broadcasting Device (Light sensor beacon) User Manual
Mirror Download [FCC.gov]MINEW TECHNOLOGIES E6 Digital Broadcasting Device (Light sensor beacon) User Manual
Document ID3427321
Application IDVJ+KXPgv/mnQOOnQM+OIEw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize57.22kB (715277 bits)
Date Submitted2017-06-15 00:00:00
Date Available2017-06-15 00:00:00
Creation Date2017-04-12 23:01:26
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2017-06-09 14:54:39
Document TitleUsers Manual
Document CreatorMicrosoft® Word 2010
Document Author: starcraft

Minew Technologies
E6 Light Sensor Beacon
Datasheet V1.0.0
Light Sensor Beacon
Datasheet V1.0.0
Ordering Code
E6-6001A
TEL: +86-755-8886 8480
Description
Black casing, CE&FCC certified BLE module with a simple light sensor and
anti-dismantlement switch, includes 1pc 230mAh CR2032 coin battery, RoHS
FAX: +86-755-2982 5342
EMAIL: sales@minewtech.com
URL: www.minewtech.com
Page 1
Minew Technologies
E6 Light Sensor Beacon
Datasheet V1.0.0
The light sensor beacon E6 is the latest basic IoT sensor device with the light sensor and an
anti-dismantlement switch. The hardware is based on the ultra-low power consumption BLE chipset
nRF52832 and the firmware is compatible with the leverage Bluetooth 5.0 technology.
The light sensor beacon E6 is designed for the commercial advertising, indoor location-based service and
specialized for the asset management and tracking application.
FEATURES
- Programmed Minew basic IoT firmware
- Included a light sensor
- Included an anti-dismantlement switch
- The max. 50 meters advertising distance
- Ultra-low power consumption chipset nRF52832
- Small size, ultrasonic assembling technology
- Easy to print the logo on the center of top case;
PICTURE
E6 Light sensor Beacon
Image 1
CERTIFICATIONS
- iBeacon MFi License (iBC-14-00582)
- FCC Regulation (FCC Part 15.)
- CE Regulations (Included EN300328/301489/60950/62479)
TEL: +86-755-8886 8480
FAX: +86-755-2982 5342
EMAIL: sales@minewtech.com
URL: www.minewtech.com
Page 2
Minew Technologies
E6 Light Sensor Beacon
Datasheet V1.0.0
ELECTRONIC PARAMETERS
Item
Case Color
Battery Model
Operation Voltage
Transmission Circuit
Transmission Range
Light sensor
Broadcasting Interval
Antenna
Accessories
Net Weight
Size
Value
Black
1 x CR2032
1.7-3.6V
6.5mA (Max.)
50 meters
Photoresistor
10 seconds
50ohm
Double adhesive
6.5g
42.5*23.5*5.3mm
Remarks
Null
230mAh, 3.0V
DC
Tested at 0dBm transmission power
Maximum
Null
Null
On board / PCB Antenna
1pc, high-strength, 3M brand;
With battery but without package
Null
TECHNICAL SUPPORT
Item
Datasheet
2nd Development
APP Tools
Version
V1.0.0
V1.0.0
---
File Name
E6 Light Sensor Beacon Datasheet_V1.0.0.pdf
E6 Light Sensor Interface Document_V1.0.0.pdf
Updated Date
8th April, 2017
8th April, 2017
nRFConnect
---
PACKING INFORMATION
Image 2
Details
Quantity (E6)
Net Weight
Gross Weight
Size
TEL: +86-755-8886 8480
Inner Box (foam)
100pcs per package box
0.65kg
0.7Kg
30.5 x 11 x 7.5 cm
FAX: +86-755-2982 5342
Carton
1000pcs per carton
6.5Kg
7.0Kg
32 x 23 x 40 cm
EMAIL: sales@minewtech.com
URL: www.minewtech.com
Page 3
Minew Technologies
E6 Light Sensor Beacon
Datasheet V1.0.0
APPDENDIX
1. J-LINK Programmer Kit;
2. Over-the-Air Function;
Please contact Minew sales team to ask more related information if needed.
DECLARATION
The contents of this datasheet are subject to change without prior notice for further improvement. Minew
team reserves the right to explain all the terms of this datasheet.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
TEL: +86-755-8886 8480
FAX: +86-755-2982 5342
EMAIL: sales@minewtech.com
URL: www.minewtech.com
Page 4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2017:04:12 23:01:26+08:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2017:06:09 14:54:39+08:00
Metadata Date                   : 2017:06:09 14:54:39+08:00
Format                          : application/pdf
Creator                         : starcraft
Title                           : 关于申请专利应提交资料
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:05986600-eef2-448c-b28c-706d01656a33
Instance ID                     : uuid:864901c9-057b-4cea-bd44-accb6e40fd4f
Page Count                      : 4
Language                        : zh-CN
Author                          : starcraft
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ABU6-E6

Navigation menu