MOBASE ELECTRONICS SEKS-SL11ARX Remote Keyless Entry System (receiver only) User Manual SL BCM FCC Marking 110405

Daedong Co. Ltd. Remote Keyless Entry System (receiver only) SL BCM FCC Marking 110405

User manual

1. GENERAL1.1. MakeShinchang Electrics Co.,Ltd.1.2. Model No.- Transmitter : SEKS-AM11ATx- Receiver : SEKS-SL11ARX 1.3. Name and address of manufacturerShinchang Electrics Co.,Ltd.734-2, Wonshi-dong, Danwon-gu, Ansan-si, Kyungki-do, 425-090, Korea1.4. Address of assembly plantShinchang Electrics Co.,Ltd.734-2, Wonshi-dong, Danwon-gu, Ansan-si, Kyungki-do, 425-090, Korea
2. PRODUCT SPECIFICATION2.1 SCOPE OF REMOTE KEYLESS ENTRY SYSTEM2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER send CAN data and drives the Hazard Lamp.2.2 SPECIFICATIONS2.2.1 TRANSMITTER2.2.2 RECEIVER Storage temperature range -30 ~ 80℃ Modulation FSKITEM SPECIFICATIONRated supply voltage DC 3VOperating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ Frequency 315.00MHz Code Rolling Code(Hopping Algorithm) Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Electric field strength 10mW (433.92MHz)Below than 5.5mA Operating Temperature - 30 ~ + 80℃Max Humidity 95% Standby Current (in alarm setting condition)SpecificationItem DC 9 ~ 16V Operating Voltage DC 12V Rated Supply Voltage
3. USER MANUAL3.1 NAME : BCM system- This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or PANIC in vehicle. - This BCM system is to be installed on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Anti Theft Alarm System. *RKE : Remote Keyless Entry.3.2 SYSTEM CONSTRUCTION3.2.1 SYSTEM IN VEHICLE3.2.1 SYSTEM FOR TEST * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or PANIC output signal. ANTENNA BATTERYDOORACTUATORROLLINGCODEANTENNARECEIVERBATTERYlampRECEIVERLOCK or UNLOCK or PANIC DATAROLLING CODE(315.00MHz)
3.3 Operating summary① TRANSMITTER's button is pushed.② TRANSMITTER sends the code by radio frequency.③ RECEIVER gets the code and decodes it.④ RECEIVER judges the code whether it is right code or not.⑤ RECEIVER checks door lock or unlock⑥ RECEIVER send lock or unlock CAN Data and drives the Hazard Lamp. 3.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA.3.4 Caution① Danger of explosion if battery is incorrectly replaced.② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.

Navigation menu