MOBASE ELECTRONICS SEKS-SL11ARX Remote Keyless Entry System (receiver only) User Manual SL BCM FCC Marking 110405
Daedong Co. Ltd. Remote Keyless Entry System (receiver only) SL BCM FCC Marking 110405
User manual
1. GENERAL 1.1. Make Shinchang Electrics Co.,Ltd. 1.2. Model No. - Transmitter : SEKS-AM11ATx - Receiver : SEKS-SL11ARX 1.3. Name and address of manufacturer Shinchang Electrics Co.,Ltd. 734-2, Wonshi-dong, Danwon-gu, Ansan-si, Kyungki-do, 425-090, Korea 1.4. Address of assembly plant Shinchang Electrics Co.,Ltd. 734-2, Wonshi-dong, Danwon-gu, Ansan-si, Kyungki-do, 425-090, Korea 2. PRODUCT SPECIFICATION 2.1 SCOPE OF REMOTE KEYLESS ENTRY SYSTEM 2.1.1 KEY PART : TRANSMITTER is inside of the REMOTE KEY, and it sends the ROLLING CODE to the RECEIVER by Radio Frequency. 2.1.2 RECEIVER : It receives the ROLLING CODE and decodes that, thereafter RECEIVER send CAN data and drives the Hazard Lamp. 2.2 SPECIFICATIONS 2.2.1 TRANSMITTER 2.2.2 ITEM SPECIFICATION Rated supply voltage DC 3V Operating voltage range DC 2.5 ~ 3.2V Operating temperature range -20 ~+60℃ Storage temperature range -30 ~ 80℃ Modulation FSK Frequency 315.00MHz Code Rolling Code(Hopping Algorithm) Electric field strength 10mW (433.92MHz) Battery life 2 Year(10Times/Day)(Lithium 3V 1EA) Item Specification Rated Supply Voltage DC 12V Operating Voltage DC 9 ~ 16V Operating Temperature - 30 ~ + 80℃ Max Humidity 95% RECEIVER Standby Current Below than 5.5mA (in alarm setting condition) 3. USER MANUAL 3.1 NAME : BCM system - This system is BCM and inculdes RKE. - RKE in BCM system is intended for auto door lock or unlock or PANIC in vehicle. - This BCM system is to be installed on motor vehicles as *OE item. *OE : Original Equipment. *BCM : Anti Theft Alarm System. *RKE : Remote Keyless Entry. 3.2 SYSTEM CONSTRUCTION 3.2.1 SYSTEM IN VEHICLE ANTENNA BATTERY ROLLING CODE (315.00MHz) RECEIVER 3.2.1 DOOR ACTUATOR SYSTEM FOR TEST ANTENNA BATTERY LOCK or UNLOCK or PANIC DATA ROLLING CODE RECEIVER lamp * Through the use of lamp, operating state is displayed by lamp. lamp 'ON' means that actuator is operated by door lock or unlock or PANIC output signal. 3.3 Operating summary ① TRANSMITTER's button is pushed. ② TRANSMITTER sends the code by radio frequency. ③ RECEIVER gets the code and decodes it. ④ RECEIVER judges the code whether it is right code or not. ⑤ RECEIVER checks door lock or unlock ⑥ RECEIVER send lock or unlock CAN Data and drives the Hazard Lamp. 3.3.1 LOCK & UNLOCK ① If LOCK or UNLOCK button is pushed for less than 1 sec, then TRANSMITTER sends the LOCK or UNLOCK DATA. 3.4 Caution ① Danger of explosion if battery is incorrectly replaced. ② Replace only with the same or equivalent type recommended by the manufacturer. ③ Dispose of used batteries according to the manufacturer's instructions.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2011:04:07 10:42:49+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2011:04:07 10:50:04+09:00 Metadata Date : 2011:04:07 10:50:04+09:00 Format : application/pdf Creator : HONG Title : SL_BCM_FCC Marking_110405.xls Document ID : uuid:bd147e5f-3f7c-4b1b-8661-bdcf6e50aa7d Instance ID : uuid:360f975a-1b61-49a5-99c7-cb2fe115526c Has XFA : No Page Count : 5 Author : HONGEXIF Metadata provided by EXIF.tools