MOTOTECH MT-FOL01 Transmitter Assy - Folding Key User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2408462
Application ID	shSzYOhkmfpG0f43R+LEBg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	209.36kB (2617035 bits)
Date Submitted	2014-10-01 00:00:00
Date Available	2015-03-30 00:00:00
Creation Date	2013-04-24 13:58:35
Producing Software	doPDF Ver 7.2 Build 373 (Windows XP Professional Edition (SP 2) - Version: 5.1.2600 (x86))
Document Lastmod	2014-09-26 14:56:25
Document Title	User Manual

Vehicle Name:
C210
DEPARTMENT:
R&D CENTER
TITLE :
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
PAGE :
STANDARD SPECIFICATION
PART NUMBER :
MT-C210-0107
1 / 11
TRANSMITTER ASSY – Standard Specification
-- TABLE OF CONTENTS -1. APPLICATION
1.1 SUMMARY
2. ELECTRCAL PERFORMANCE
2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y
2.2 WIRELESS CHARACTERISTIC
2.3.1 DOMESTIC (DOM)
2.3.2 GENERAL EXPORT(EXP)
3. FUNCTION
3.1 STRUCTURE OF DATA ( "1", "0" )
3.2 TRANSMITTER PROTOCOL FORMAT
3.3 BUILDING THE TRANSMITTED CODE WORD (ENCODER)
3.4 BASIC OPERATION OF RECEIVER (DECODER)
3.5 SYNCHRONIZATION WINDOW
3.6 LED FLICKERING PROCEDURE
3.7 RADIO FREQUENCY TRANSMISSION PROCEDURE
3.8 REMOCON FUNCTION OF EACH SIGNAL
3.9 POWER ON INITIALIZATION
4. OPERATING
4.1 REMOTE DOOR LOCK
4.2 REMOTE DOOR UNLOCK
4.3 PANIC FUNCTION
4.4 ESCORT FUNCTION(DOM ONLY)
4.5 ID CODE
4.6 REMOCON RESPONSE OF OPERATING CONTINUOUS SWITCH
5. REVISION LIST
5.1 REVISION SP01 (2013-01-07)
3.
2.
REV.SP01
MARK
EO NUMBER
REVISION DATE
2013.01.07
ORIGINAL DATA
MANAGEMENT DEPARTMENT
ORIGINAL RELEASE
CHANGING LIST
REFERENCE DATA
1 ~ 11
PAGE
DIVISION WRITER
POSITION
APPROVAL
13.01.07
CHAGING DATE
REVIEWER
KIM.H.J
WRITER
APPROVER
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
PAGE: 2 / 11
(SHT/SHTS)
1. APPLICATION
THIS SPEC APPLIES TO C210 IMMO & BCM Transmitter ASS’Y.
BUT, IF CONTENT WHAT IS DIFFERENT THIS SPEC EXIST, CONTENTS OF DRAWING SHEET IS FIRST OF ALL
1.1 SUMMARY
WHEN USER CONTROL SWITCH OF TRANSMITTER ASS’Y, DATA FORMAT OF“VEHICLE CONTROL MESSAGE” IS
TRANSMITTED TO BCM BY TRANSMITTER’S CPU, AND THEN WHEN BCM RECEIVE THAT MESSAGE, BCM’S CPU
CONSIDER TO CONTROL VEHICLE
열쇠고리
PANIC BUTTON
UNLOCK BUTTON
LOCK BUTTON
RELEASE BUTTON
KEY BLADE
PICTURE 1. Transmitter
EACH SWITCH FUNCTIONS IS SAME TO TABLE 1.1
TABLE 1.1
FUNCTION
LOCK
BUTTON
EACH SWITCH FUNCTIONS OF TRANSMITTER
SWITCH FUNCTION
DOOR
LOCK
ESCORT
(DOM ONLY)
SHORT PRESSING LOCK BUTTON UNDER 0.5s
- LED flicker only once as long time
LONG PRESSING LOCK BUTTON OVER 0.5s
- LED flicker twice as short time
UNLOCK
BUTTON
DOOR
UNLOCK
SHORT PRESSING UNLOCK BUTTON UNDER 0.5s
- LED flicker only once as long time
PANIC
BUTTON
PANIC
LONG PRESSING PANIC BUTTON OVER 2s
- LED flicker twice as short time
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
페이지: 3 / 11
(SHT/SHTS)
2. ELECTRICAL PERFORMANCE
2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y
LIST
REQUIREMENTS
RATED VOLTAGE
DC 3.0V
OPERATING
VOLTAGE RANGE
OPERATING
TEMPERATURE
RANGE
STORED
TEMPERATURE
RANGE
INSULATION
RESISTANCE
USING DATE
DARK CURRENT
NOTE
DC 2.7V ～ DC 3.3V
-10℃ ～ +60℃
NORMAL
OPERATING
TEMPERATURE RANGE
FOR
OPERATING
-20℃ ～ +70℃
IT DOESN’T EXISTED FEBRILITY
OR
IGNITION
BY
LEAKAGE
CURRENT
USING ONE DAY PER 10 TIMES,
OVER 2 YEARS
PCB
MOISTUREPROOFING
AND
DEFINE
WITH
INSULATION
ELECTRONIC COMPONENTS
COATING
REQUIRED
UNDER 1uA
2.2 WIRELESS CHARACTERISTIC
2.3.1 DOMESTIC (DOM)
(1) TRANSMIT FREQUENCY: 433.92MHZ ± 10KHZ(@ ROOM TEMPERATURE)
(2) CLEAR FREQUENCY BAND WIDTH: 13kHz ± 5kHz
(3) OUTPUT: 3.981 mW UNDER (6dBm)
(4) MODULATION METHOD: FM MODULATION
(5) COMMUNICATION METHOD: HALF DUPLEX METHOD
2.3.2 GENERAL EXPORT (EXP)
(1)
(2)
(3)
(4)
(5)
TRANSMIT FREQUENCY: 433.92MHZ ± 10KHZ(@ ROOM TEMPERATURE)
CLEAR FREQUENCY BAND WIDTH: 13kHz ± 5kHz
OUTPUT: 3.981 mW UNDER (6dBm)
MODULATION METHOD: FM MODULATION
COMMUNICATION METHOD: HALF DUPLEX METHOD
FCC (Federal Communications Commission)
WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference unless the modifications
are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two
Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may cause
undesirable operation.
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
3. FUNCTION
3.1 STRUCTURE OF DATA (“1", "0”)
3.2 TRANSMITTER PROTOCOL FORMAT
(1) 송신부의 1회 DATA 전송횟수는 10FRAME으로 구성된다.
(1) ONE TIME TRANSMITTING DATA CONSIST OF 10 FRAMES
(2) 각 FRAME간 전송 간격은 6.8 ± 1ms로 한다.
(2) EACH FRAME DATA THANSMISSION INTERVAL IS 6.8 ± 1ms
(3) 모든 0과 1의 BIT 형태는 PULSE 형태로 구별한다.
(3) ALL OF BIT (0 AND 1) DIFFERENTIATE THE PULSE FORM
(4) CODE WORD TRANSMISSION SEQUENCE (73.6msec)
(5) TRANSMISSION FORMAT (MANCHESTER)
페이지: 4 / 11
(SHT/SHTS)
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
페이지: 5 / 11
(SHT/SHTS)
(6) CODE WORD TRANSMISSION DATA FORMAT
(7) RF Data Format (756msec)
①
 Preamble: 16BIT CONSIST OF “0”
② Header: CONSIST OF Low Level FOR 4TE(Timing Element)
③ Start Bit: 1Bit CONSIST OF “1”
④ Encrypted Portion: CONSIST OF 32Bit (TABLE 3-1)
⑤ Fixed Code Portion: CONSIST OF 32Bit (TABEL 3-2)
Bit Address
0 ～ 15
16 ～ 17
18 ～ 19
20 ～ 21
22
23
24 ～ 27
28 ～ 31
TABLE 3-1 Encrypted Portion Information
Description
Values
Synchronization
Count
Synchronization Counter Value
Counter
00- TE= 100 us
BSEL_0,
01- TE= 200 us
Bit rate select
BSEL_1
10- TE= 400 us *
11- TE= 800 us
00- 1
Minimum number of code 01- 4
MTX_0, MTX_1
words
10- 10 *
11- 16
00- 0 ms (1 TE)
GUARD_0,
01- 6.8 ms + 2 TE *
Guard time select
GUARD_1
10- 25.6 ms + 2 TE
11- 76.8 ms + 2 TE
0 = PWM
MOD
Modulation Format
1 = MANCHESTER *
0 = Short Header, TH = 4 x TE *
HEADER
Header Length
1 = Standard Header, TH = 10 x TE
Not Used
S3, S2, S1, S0
= DOOR LOCK
S3, S0, S1,
Button Status
= DOOR UNLOCK
S2
= PANIC
= ESCORT
Field
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
Bit Address
32 ～ 55
SPEC NO: ES-
페이지: 6 / 11
(SHT/SHTS)
TABLE 3-2 Fixed Portion Information
Field
Description
ID0 ~ ID23
Serial Number
56 ～ 59
0 0 1 0
60 ～ 63
S3,
S3, S0, S1, S2
Button Status
3.3 BUILDING THE TRANSMITTED CODE WORD (ENCODER)
3.4 BASIC OPERATION OF RECEIVER (DECODER)
3.5 SYNCHRONIZATION WINDOW
Values
S2,
S1,
S0
DOOR LOCK
DOOR UNLOCK
PANIC
ESCORT
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
3.6 LED FLICKERING PROCEDURE
LED FLICKERING PERFORM ON/OFF PROCEDURE
TABLE 3-3 LED TURNED THE LIGHT ON TIME BY EACH FUNCTION
3.7 RADIO FREQUENCY TRANSMISSION PROCEDURE
TABLE 3-4 TX TRANSMISSION FLOW CHART
START
스위치 분석
NO(NOISE ...)
스위치 입력 OK
YES
TX POWER = 1(ON)
LED = ON
TX DATA 출력(2.5Kbit/s)
LED = OFF
TX POWER = 0(OFF)
END
페이지: 7 / 11
(SHT/SHTS)
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
페이지: 8 / 11
(SHT/SHTS)
3.8 REMOCON FUNCTION OF EACH SIGNAL
TABLE 3-8 REMOCON FUNCTION OF EACH SIGNAL
SYMBOL
SIGNAL NAME
VSS
GND
RA0
LOCK
RA1
UNLOCK
RA2
Not Used
RC0
POWER CON
RC1
Not Used
RC2
TX DATA
RC3
PA CON
RC4
LED
RC5
Not Used
/MCLR
RESET
RA4
PANIC
RA5
Not Used
VDD
BAT
I/O
(PIN NO)
POWER
( 14 )
INPUT
( 13 )
INPUT
( 12 )
( 11 )
OUTPUT
( 10 )
( 9 )
OUTPUT
( 8 )
OUTPUT
( 7 )
OUTPUT
( 6 )
( 5 )
INPUT
( 4 )
INPUT
( 3 )
( 2 )
POWER
( 1 )
CONTENTS
OPERATING
NOTE
Ground
HIGH: PRESSING
- SHORT PRESSING - DOOR LOCK
- LONG PERSSING - ESCORT
HIGH: PRESSING
- SHORT PRESSING - DOOR UNLOCK
POWER DOWN MODE
OUTPUT
WHEN OPERATING FINISH,
IT IS SLEEP MODE
Spare IO Port
Spare IO Port
RF DATA OUTPUT
DATA OUTPUT ABOUT SWITCH INPUT
625Hz
RF PA OUTPUT
POWER AMP CONTROL
736ms
LOW: LED ON
Data OUTPUT Display
Spare IO Port
WHEN POWER TURN
ON, IT RESET
HIGH: PRESSING
- LONG PRESSING - PANIC
Spare IO Port
Spare IO Port
BAT POWER SUPPLY
- POWER SUPPLY TO MICOM
NORMAL : 2.1V < BAT < 3.5V
3.9 POWER ON INITIALIZATION
(1) DEFINE ABOUT ALL OF I/O (INPUT/OUTPUT) PINS
(2) WHEN CPU CHANGE FROM POWER DOWN MODE TO ACTIVE MODE, DEFINE EACH PORT’S CONDITION
SYMBOL
PIN
NO
I/O
CONDITION
VDD
POWER
HIGH
RA5
RA4
INPUT
HIGH
/MCLR
INPUT
HIGH
RC5
RC4
OUTPUT
RC3
OUTPUT
CONTENTS
SYMBOL PIN NO
I/O
CONDITION
CONTENTS
RC2
OUTPUT
DATA
RC1
Not Used
RC0
10
OUTPUT
HIGH
HIGH ON
RA2
11
Not Used
Not Used
RA1
12
INPUT
HIGH
LOW
LOW ON
RA0
13
INPUT
HIGH
HIGH
HIGH ON
VSS
14
POWER
LOW
Not Used
HIGH
PERCEIVING
LOW
PERCEIVING
HIGH
PERCEIVING
HIGH
PERCEIVING
Ground
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
페이지: 9 / 11
(SHT/SHTS)
4. OPERATING
4.1 REMOTE DOOR LOCK
WHEN SWITCH OF TRANSMITTER PRESSE UNDER 0.5s, IT PERFORM VEHICLE’S DOOR LOCK FUNCTION
(1) AFTER SWITCH PRESSING (PRESSING TIME = 0.1 ~ 0.5s), IMMEDIATELY TRANSMITTER IS POWER ON
AND TRANSMIT DATA
(2) DURING MICOM TRANSMIT DATA, IF BUTTON INPUT ENTER, MICOM IGNORE THAT SIGNAL AND
IT PERFORM EXISTING OPERATING
(3) IF SWITCH PRESSING TIME IS UNDER 0.1s, MICOM IGNORE THAT SIGNAL
(4) WHEN ALL OF OUTPUT COMPLETING, IF NOTHING HAPPENS WITHIN 20 ± 5ms, IT WILL BE ENTERED
“POWER DOWN MODE”
4.2 REMOTE DOOR UNLOCK
WHEN SWITCH OF TRANSMITTER PRESS UNDER 0.5s, IT PERFORM VEHICLE’S DOOR UNLOCK FUNCTION.
(1) AFTER SWITCH PRESSING (PRESSING TIME = 0.1 ~ 0.5s), IMMEDIATELY TRANSMITTER IS POWER ON
AND TRANSMIT DATA
(2) DURING MICOM TRANSMIT DATA, IF BUTTON INPUT ENTER, MICOM IGNORE THAT SIGNAL AND
IT PERFORM EXISTING OPERATING
(3) IF SWITCH PRESSING TIME IS UNDER 0.1s, MICOM IGNORE THAT SIGNAL.
(4) WHEN ALL OF OUTPUT COMPLETING, IF NOTHING HAPPENS WITHIN 20 ± 5ms, IT WILL BE ENTERED
“POWER DOWN MODE”
4.3 PANIC FUNCTION
WHEN SWITCH OF TRANSMITTER PRESS OVER 2s, IT PERFORM VEHICLE’S PANIC FUNCTION.
(1) IF SWITCH IS PRESSED LONGER THAN 2s, AT THE SAME TIME, TRANSMITTER IS POWER ON AND
TRANSMIT DATA
(2) DURING MICOM TRANSMIT DATA, IF BUTTON INPUT ENTER, MICOM IGNORE THAT SIGNAL AND
IT PERFORM EXISTING OPERATING
(3) WHEN ALL OF OUTPUT COMPLETING, IF NOTHING HAPPENS WITHIN 20 ± 5ms, IT WILL BE ENTERED
“POWER DOWN MODE”
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
페이지: 10 / 11
(SHT/SHTS)
4.4 ESCORT FUNCTION (DOM ONLY)
WHEN SWITCH OF TRANSMITTER PRESSE OVER 0.5s, IT PERFORM VEHICLE’S ESCORT FUNCTION
(1) IF SWITCH IS PRESSED LONGER THAN 0.5s, WHEN THE TIME BECOME 1s, TRANSMITTER IS POWER ON
AND TRANSMIT DATA
(2) DURING MICOM TRANSMIT DATA, IF BUTTON INPUT ENTER, MICOM IGNORE THAT SIGNAL AND
IT PERFORMS EXISTING OPERATING.
(3)WHEN ALL OF OUTPUT COMPLETING, IF NOTHING HAPPENS WITHIN 20 ± 5ms, IT WILL BE ENTERED
“POWER DOWN MODE”
(4) LED IS NOT OPERATING
4.5 ID CODE
(1) RECEVING THE SAME ID CODE NOT ONLY TRANSMITTER, BUT ALSO BCM
ID CODE IS CONTROLED VEHICLE BY WIRELESS, SO TO MAINTAINED ACCURATE VEHICLE OPERATION
AND TO PREVENTED MALFUNCTION OF VEHICLE BYINTERFERENCE ARE VERY IMPORTANT
, THEREFORE IT MUST BE CHOSEN CAREFULLY IN TERM OF A THEFT OF THE VEHICLE AND
THE USER’S SATISFACTION AND POST-MANAGEMENT
(2) ID CODE COMPOSITION
ID CODE IS WHAT CONBINE “24 MULTIPLIER OF 2” CODE
4.6 REMOCON RESPONSE OF OPERATING CONTINUOUS SWITCH
(1) WHEN SWITCH IS PRESSING, IT BASICALLY TRANSMIT 10 FRAME
(2) DURING TRANSMIT 10 FRAMES, IF THE SWITCH PRESSES SEVERAL TIMES, MICOM IGNORE
CONTINUOUS SWITCH AND PERFORM EXISTING TRANSMISSION
(3) EXISTING SWITCH OPERATING IGNORE NEXT SWITCH OPERATING
SSANGYONG MOTOR COMPANY
STANDARD SPECIFICATION
SPEC NO: ES-
5. REVISION LIST
5.1 REVISION SP01 (2008-09-01)
(1) LIST : 3-2의 6) CODE WORD TRANSMISSION
(2) NOT USED RANGE OF Fixed Code Portion : 0001 => 0010
5.1 REVISION SP01 (2013-01-07)
(1) LIST: ORIGINAL RELEASE
페이지: 11 / 11
(SHT/SHTS)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2013:04:24 13:58:35+09:00
Modify Date                     : 2014:09:26 14:56:25+09:00
Metadata Date                   : 2014:09:26 14:56:25+09:00
Producer                        : doPDF Ver 7.2 Build 373 (Windows XP Professional Edition  (SP 2) - Version: 5.1.2600 (x86))
Format                          : application/pdf
Document ID                     : uuid:aa0e1c1b-9c91-44f4-970d-7546f107675d
Instance ID                     : uuid:6d292a18-7ea5-43ba-86b1-a9577224ae38
Page Layout                     : OneColumn
Page Mode                       : UseNone
Page Count                      : 11

EXIF Metadata provided by EXIF.tools