MOVON MF280 BLUETOOTH MONO HEADSET User Manual MF280 manual Do not print ai

MOVON Corporation BLUETOOTH MONO HEADSET MF280 manual Do not print ai

Users Manual

HEADSET MF280WIRELESSUser Manual MF280 Headset Ear hook Car A/C power 3 di erent size ear bud User manual Charger adapter (Small, Medium, Large) Charge the battery Connect an adapter to the charging port of the headset and plug into power outlet or automobile (or any standard 12V~14V). When charging is completed, charging .What’s in the box?Getting to know the MF280-1- English English [NOTE] Please use supplied power adaptor only. Before using Hands-free, You must charge this product Don’t use if hands-free is being charged. Charging by Adapter : If Adaptor added, the Indication LED will be RED. Low Battery Warning : When the battery is low, the Indication LED will be turned into Red and you can hear a beep every 30 seconds. Once hear a beep, please charge immediately. about 10 minutesUsing your MF280 TURNING ON/ OFF Power On Power O -2-Charging PortMultifunction ButtonLEDVolume ButtonMicrophoneEar BudSpeaker PAIR THE MF280 TO YOUR MOBILE PHONE 1. Set your mobile phone to Bluetooth discoverable mode. (visibility on) 2. Turn the MF280 on. rst time, MF280 will go to pairing mode. (LED will blink Blue and Red) Or Press the Multifunction button for 4 sec until LED blink as Blue & Red 3. Search the MF280 via y rm it when the connection rmation message appears on your mobile phone. PIN number is “0000” (4 zeros) SIMPLE PAIRING: If your mobile phone supports Bluetooth core spec 2.1, you don’t need to put PIN number to pair. (This function is only available when your mobile phone supports Bluetooth version 2.1) EASY PAIRING: If you use headset for the rst time, headset will go pairing mode directly. MAKING A CALL 1. Last call-Redialing : Press Multifunction button. 2. Voice Dial : Press MFB for about 2 seconds, then voice dialing is activated on the phone. If you want to cancel Voice dialing, press the MFB for about 2seconds during the Voice dial mode. [NOTE] Please make sure that the phone supports the voice dialing feature. (See you phone’s manual for detail instruction) If you dial with phone, call will be transferred to headset automatically. You must transfer a call depending on your mobile phone. Please check you phone’s manual for details. ANSWERING A CALL Press Multifunction button. REJECTING A CALL Press Multifunction button for about 2 seconds. ENDING A CALL Press the Multifunction button during the call or just press the “End” button on the phone.-3- -4-English EnglishActive Dev ListModel NameMF280Input PIN Code 0000 TRANSFERRING A CALL To transfer a call from Headset to your mobile phone and vice versa, press the Multifunction button during the call for about 2 seconds. ADJUSTING VOLUME You can adjust the Volume by pressing the Volume up (+) or down button (-) during the call. MIC MUTE If you press the volume down (-) button for about 2 seconds, the microphone will be muted and you will hear a beep every 5 sec during the mute. [NOTE] The MIC muted mode can be deactivated by pressing Volume down button (-) for 2 sec. again. CALL WAITING Before using Call-waiting through the hands-free, check if the mobile phone supports hands-free pr le function. Further, be aware that “Call hold” and “Multiparty” functions are available only through network operator. 1. Answering a second call/putting a rst call into waiting mode : Press the Multifunction button twice. 2. Ending a 1st call and Answering 2nd call : Press the Multifunction button to end the 1st call, then press Multifunction button to answer 2nd call. 3. Rejecting a second call while answering 1st call : Press the Multifunction button for 2 sec. 4. Switching 1st call to 2nd call : Press the Multifunction button twice and vice versa. [NOTE] Three way calling will not be supported on Multi-point connected mode. MULTI-POINT: Using the MF280 with two phones [NOTE] Some mobile phones are not available for multipoint. 1. Multi-point Connect rst. After then search MF280 from each mobile phones at the same time. Please connect rst mobile phone. Once the connection is completed, please connect the second mobile phones. [NOTE] Some mobile phones need to connection process at the same time. 2. Making a call [via second mobile phone] Press the Volume Down (-) button for about 2 seconds for last call-redialing from the second mobile phone. Press the Volume Up (+) button for about 2 seconds to activated the voice dialing of the second mobile phone. [NOTE] Making a call via the rst mobile phone, please follow the same instruction as described on “MAKING A CALL”. -5- -6-English English 3. Receiving and Rejecting a call Please use the general rules as you receive / reject calls. [NOTE] erent ring tones. CHECKING THE BATTERY LEVEL Press the Volume up (+) or Volume down (-) button twice, then MF280 will announce the Battery level. RESET Press the MFB and Volume down button for 4 sec until you hear a beep. Then all device information will be reset.STATUS INDICATION 1. LED IndicationStatus LED IndicationPower On Blue LED blinks 3 timesPow Pairing Mode Blue & Red LED blinks repeatedlyConnectable Mode Blue LED blinks 1 time every 5 secondsConnected Mode Blue LED blinks 2 times every 5 secondsActive Call Mode Blue LED blinks 3 times every 5 secondsCharging Red LED turns On-7- -8-Charging Complete 2. Voice AnnouncementStatus Voice AnnouncementPower On Power onConnected ConnectedDisconnected DisconnectedBattery level: 70%~100% Battery HighBattery level: 30%~70% Battery MediumBattery level: 10%~30% Battery LowSPECIFICATIONSModel Name MF280Bluetooth Core Spec cation 3.0 le HFP 1.5/HSPCarrier Frequency 2400 MHz to 2483.5 MHzModulation Method GFSK, 1Mbps, 0.5BT GaussianMaximum Data Rate Asynchronous : 2178.1 kbps / 177.1 kbpsSynchronous : 1306.9 kbps / 1306.9 kbpsBluetooth Class Class 2Hopping 1600 hops/sec, 1MHz Channel SpaceTransmit Power 1 dBmCoverage Range 10 MetersReceiver Sensitivity -83 dBm / 0.1 % BERContinuous Talk Time 6 hoursStandby Time 200 hoursWeight 10gDimension 18.1(H) x 51.3(L) x 9.5(H) mmCharging Voltage DC 5.0 ~ 5.3 VCharging Time 1.5 HoursOperating Temperature -10° to +50°CStorage Temperature -20° to +80°CBattery Lithium polymer 3.7V 90mAHSAFETY AND GENERAL INFORMATION1. Please read this guidebook carefully and follow the instruction.2. To avoid any damage or malfunction of the unit, do not drop it from high place.3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then do not operate it normally to avoid any electrical shock, explosion and damage of the unit.4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves or other apparatus which produce heat. It may cause explosion, degrade of performance and reduce battery life.5. Do not modify, repair & disassemble unit at discretion (especially batter y: it may cause an explosion.6. Do not place the heavy objects on the unit.7. Use only supplied and approved charger.8. Replacement or ser ed service center or manufacturer.9. Unplug this unit when unused for long period of time or during lightening storms. [CAUTIONS] ELECTRIC SHOCK HAZARD The battery used in this device may pr re or chemical burn if mis-treated.FCC WARNINGThis equipment may generate or use radio frequency energy cations to this equipment may cause harmful interfer cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthoriz cation is made. [NOTE] This equipment has been tested and found to comply with the limits for a Class B digital device, purchant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a cir erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.”FCC RF Radiation Exposure Statement1.FCC Notice 1. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including inter ference that may cause undesired operation of the device. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.EUThis product is CE marked according to the provision of the R&TTE Directive (99/5/EC).Here by MOVON Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Bluetooth is a trademark owned by the Bluetooth SIG, Inc.WARRANTYThe condition of this warranty and our responsibilities under this warranty are as follows:Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only. You must be able to prove the date of original purchase of the unit with a dated receipt. The warranty is not applicable if the product has been subject to physical abuse, improper installation, modi cation or repair by unauthorized third party. The responsibility of supplier’s products shall be limited to the repair or replacement of the product at it’s sole discretion. cally exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries, decorates and other accessories. A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse, misuse or any unauthorized repair, modi cation or disassemble. Modi cation and repair of the unit should be done by authoriz ed service personnel, center or returned to the manufacturer. This warranty gives y c legal rights and you may also have other rights which vary under local laws.WEEE SYMBOL INFORMATION Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government ce, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. [IMPORTANT NOTE] To comply with RF exposure requirements, this device may not be co-located with any other transmitter or antenna.

Navigation menu