MRT LINE-COREM Bluetooth robot User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3474233
Application ID	btAIN92pZDKFa2ADd8D9LA==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	469.94kB (5874210 bits)
Date Submitted	2017-07-20 00:00:00
Date Available	2018-01-16 00:00:00
Creation Date	2016-10-20 17:58:52
Document Lastmod	2017-07-12 18:28:49
Document Title	Users manual
Document Creator	WPS Office
Document Author:	Administrator

content
1. What is LINE-Core M?................................................................................................................................. 3
2. What is LINE-Core M made of ?............................................................................................................... 4
LSM-micro, LSC-m, FRAME, BATTERY
3. What is the function of each parts in LSC-m....................................................................................... 5
4. How to charge battery?.............................................................................................................................. 8
5. What should we notice when assemble LINE-Core M.......................................................................9
Notice on assemble and stock .............................................................................................................. 12
6. What should be we confirm before assemble LINE-Core M.................................................................... 13
7. Part list of LINE-Core M and how to assemble......................................................................................... 14
PART1 RIGHT LEG.......................................................................................................................................... 15
PART2 LEFT LEG............................................................................................................................................. 23
PART3 RIGHT ARM........................................................................................................................................ 31
PART4 LEFT ARM........................................................................................................................................... 35
PART5 HEAD & BODY.................................................................................................................................. 39
8. What is LINE MAKER APP?........................................................................................................................... 53
9. LINE-Core M basic motion introduction and confirmation....................................................................... 54
10. How to adjust Zero degree................................................................................................................... 58
10-1. Basic motion adjust.......................................................................................................................... 58
10-2. Slightly change on LSM-micro Zero............................................................................................. 62
10-3. Change the center of gravity on assembled LINE-Core M................................................... 67
11. How to run LINE Maker APP................................................................................................................. 69
11-1-1. Control Robot............................................................................................................................. 71
11-1-2. Download Process File............................................................................................................. 74
12. How to change LSM-Micro ID............................................................................................................... 78
13. How to assemble LINE-Core M kit...................................................................................................... 83
LINE-Core M
1. What is LINE-Core M?
LINE-Core M is the humanoid robot that made of 18 LSM-Micros and have different functions. It
contain Soccer mode, Fighting Mode, Dance Mode, Mission Mode and many other different modes.
This humanoid robot can be used for different robot competitions, develop creative products, robot
education and activities.
Can rotate around the waist
by using the inside LSM-Micro
Has a prominent assemble
function, very easy to
assemble after use the frame.
Different colors of LED light--Red,
Orange, Yellow, Blue, Purple and s
o on.
Achieve stable walking and
free motion by using 18
different LSM-Micro
▶You can use LINE Maker APP to remote control the robot and can program the motion according to
your requirement
LINE-Core M basic motion
User can compile their own program by using LINE-Maker APP.
Can control the robot like the remote controller
Can program robot motion
Can adjust robot zero degree and check robot
▶Can assemble different roles and suits on robots.
2.
What is LINE-Core M made of
LSM-micro
Combined with RGB color to show the LED color of LSM-Micro
- Both side have the axis of rotation, drive on both side can be realized
Can control the location value and rotating force value of LSM-Micro
Can control the speed of rotate in rotating mode.
- Have connect port on both side, more easy and conveniet to finishing t
he line.
- Torque : 5.3kgf@5V1000mA, stall / - Power : 6.5~9V
LSC-m
Use as the special controllor of LINE-Core M and other robot, Like robot
brain
- 6 LSM-Micro connect port, can control several LSM-Micro at the same
time.
- Special PC port, can long-range control and download program file
- Can connect smart phone via bluetooth to control robot, program motion
and download program file
- Inside buzzer can indicate the status of robot.
FRAME
By using the frame which is very good for connection, It is very easy to
assemble several LSM-Micro together
(Please use the provided screws and nuts to assemble)
BATTERY
7.4V Li-Po Battery
Supply battery cover and battery case
LINE-Core M
3. The construction and parts function of LSC-m
①
Power(on status)
②
B1 Button
③
B2 Button
⑥
Fireware Button
⑦
④ LED1
IR Receiver
⑤ LED2
⑧
PC Port
⑨
Power connect port
Port for LSM-Micro
(Three each side)
⑩
What is the function of each part in LSC-M
① Power Button
Open/close the robot(when turn down, It is on statues, and turn up, it is off status)
② B1 Button
Supply power for LSC-Micro or run the program or adjust zero for LSM-Micro
③ B2 Button
Cut the power of LSC-Micro or stop the current program
④ LED1
Used to check whether supplied power for LSM-Micro or program started or not
LED1 Light
Closed
whether supply power to LSM-Micro or not/ Run program or not
no power supply/no program run
Blue light
power supply/no program run
Green Light
Power supply/Program run
⑤ LED2
Used to check whether LINE-Core m work normally or not and check the balance of battery
Whether LINE-Core M work or not and the balance of battery
LED2
Blue Light
over 60% power remain, LINE-Core M work nornally
Green Light
over 15% Power remain, LINE-Core M work nornally
Yellow Light
around 5% Power remain, Can not do LINE-Core M motion
Red Light
almost 0% Power remain, LSC-Mirco will close
Every 5 second will remind when the light turn yellow, every 2 second will remind when t
he light turn red
⑥ Firmware Button
Used to update the LSC-M Firmware
⑦ IR Receiver
The place to receiver IR signal
⑧ PC port
Used to connect computer and smart phone, for download/run the program or update the
firmware
⑨ Power connect port
Can charge though adapter, power bank and so on for LSC-M
⑩ Port to connect LSM-Mirco
Work as the port to connect LSM-Micro to LSM-Micro, there is 3 each side(right and left). This six
ports are parallel connection construction, The LSM-Micro can connect to any port in the two
side(except the port for PC)
⑪ Other function of LSC-M
- Buzzer inform
LINE-Core M
After changed the main setting of LINE-Core M, finished download the program and the balance
of batter not enough, the buzzer will inform this status.
- Bluetooth insert
Used to connect smart phone, Download program and control robot.
- Store and run program file
Can storage and run the program file in LINE-Maker APP
4. How to charge battery
When the motion become slowly or the power become weak, we should charge the battery. It
will be red LED when charging and Green LED when full.

completed>
▶ The is port for input and output in battery. Please connect the port according to below picture.
Please notice the port.
Charge port
Input
▶ Time for charging is around 2-2.5 hours, it may difference due to different battery status.
LINE-Core M
5. Notice when assemble LINE-Core M
LINE-Core M made by 18 LSM-Micros many different strong bindingforce frames and other elect
ronic parts. We need know the following issues before we start to assemble LINE-Core M.
▶ The front and back side of LSM is different, the front side marked ID.
(Front side: Marked ID)
(Back side)
LSM-micro
please check the manual when assemble LINE-Core, please pay attention to the
ID of LSM-Micro and the direction of each LSM-Micro(Front side and back side)
▶ There is rotation axis in both front and back side. Please use the front side one when only use
one rotation axis.
rotating shaft
The backside of LSM-Micro will be broken if used alone.
▶ There is a direction marked on LSM-Mirco and Horn. Please confirm the direction location when
assemble the LSM-Micro and horn.
▶ Please use No. 3F6 and No.3F8 nuts when making LSM-Micro and horn. Because it maybe
difficult due to the Horn will rotate.
Under this situation, We just put No. 3F6 and 3F8 nuts into LSM-Micro and finish the assmeble of
other parts(such as shoulder,body and ankle) first, then finish the assemble of No.3F6 and 3F8, It
would be easy to assemble if use this method.
10
LINE-Core M
▶ There is 6 port in LSM-Micro to control LINE-Core M motion, the wire can connect into any port in
LSC-M, but can not connect to the port which special for computer.
Special for PC.
LSC-m have port for connect
in both right and left side.
LSM-Micro have three port
each side.
Please notice the connect
direction when connect
LSM-Micro wire.
LSC-m
▶ There is two wire listed below in battery, please choose the right wire for different purpose.
①
for charging
②
for output
Charging wire: used for charging and connect to charger.
② Connect with LSC-M wire together , used when control the robot and output wire color
should be connected with the same color wire in LSC-m.
①
Red
Red
Black
Black
▶ Hand-R1 and HAND-L1 looks like the same, but we can see the differences from the finger and
length.
HAND-R1
Little finger the shortest
HAND-L1
Mid finger the longest.
11
Mid finger
Little Finger
Notice for assembly and Stock
▶ Please use official parts and tools when assembling the robot, please do not use the chang
ed wire, motor, knife and other dangerous tools.
▶ Please do not over forced when assembling the robot.
▶ Please make sure the robot stay in flat ground when programming or motion to avoid drop
from high place.
▶
If the robot can not work normally, please notice the building steps, the balance of battery
and the wire connection of the motors.
▶ Please turn off the robot if there is anything wrong with the robot joint.
▶ Please note that do not let the fingers to touch the robot joints.
▶ Please do not lose the parts and robot, do not use wet hand to touch the robot.
▶ Please do not place the robot under the environment where too hot or too wet.
▶ Please keep your face far away from the robot.
▶ Please note that there is many small parts in the robot kit, Please take care of your kid
and avoid choking.
▶ Robot should make by the user and Please be careful when assembling the robot, user should be
responsible for the wrong handle and uncorrected assembly.
12
LINE-Core M
6. What should we confirm before to make LINE-Core M?
LSM-micro ID17,ID 18 front side
(the side where showed ID)
downward assembly.
ID18
ID17
ID11
ID12
ID13
ID14
ID09
ID15
ID10
ID07
ID16
ID08
ID05
ID06
ID03
ID04
ID01
ID02
Left leg and arm should be assembled
in front side or outward side(the side
where should ID), please refer to the
manual.
Right leg and arm should be assembled
in front side or outward side(the side
where should ID), please refer to the
manual.
13
7. The part list of LINE- Core M and how to assemble it.
14
LINE-Core M
PART1 RIGHT LEG
PART1-1
LSM-micro(ID07) X
PELVIS X2
3F6 X1
3F8 X1
3F6
3F8
Please notice the groove in LSM-Micro
(up side)
LSM-micro ID0
15
PART1-2
CABLE_8 X1
LSM-micro(ID09) X
F6 X4
NUT X4
CABLE_16 X
Please notice the groove in LSM-Micro (up side)
LSM-micro ID0
CABLE_8
Please turn the
pelvis backward
90 degree
Please notice the groove in LSM-Micro (up side)
CABLE_8
Please turn the
pelvis backward
90 degree
16
CABLE_16
LINE-Core M
PART1-3
LSM-micro(ID05) X1
THIGH X1
F6 X4
CABLE_6 X1
NUT X4
CABLE_10 X
CABLE_6
Please notice the groove in
LSM-Micro (up side)
②
①
LSM-micro ID0
CABLE_6
CABLE_10
17
PART1-4
F6 X4
PART1-2
CABLE_6
②
①
CABLE_10
Please refer to No. 1picture,
neaten cable_6 first.
18
NUT X4
LINE-Core M
PART1-5
LSM-micro(ID03) X1
ANKLE X1
F6 X4
NUT X4
Please notice the groove in LSM-Micro
(up side)
slope side
LSM-micro ID0
PART1-6
LSM-micro(ID01) X1
LSM-micro ID0
19
FOOT X1
F6 X4
NUT X4
PART1-7
HORN X2
3F6 X1
PART1-8
F6 X8
PART1-5
CABLE_6
①
②
20
CABLE_6 X1
3F8 X1
NUT X8
LINE-Core M
PART1-9
SHIN-L X1
SHIN-R X1
3F6 X2
3F8 X2
B30 X2
NUT X2
②
PART1-4
②
Please rotate the cable _10 one
circle before neaten.
①
CABLE_10
PART1-8
②
3F6
3F8
B30
21
①
PART1 RIGHT LEG completed
22
LINE-Core M
PART2 LEFT LEG
PART2-1
LSM-micro(ID08) X
3F6
PELVIS X2
3F6 X1
3F8 X1
3F8
Please notice the groove in
LSM-Micro (Up side)
LSM-micro ID0
23
PART2-2
CABLE_8 X1
LSM-micro(ID10) X
LSM-micro ID1
F6 X4
NUT X4
CABLE_16 X1
Please notice the groove in LSM-Micro
(Up side).
CABLE_8
Please turn the
pelvis backward
90 degree.
Please notice the groove in LSM-Micro (Up side)
CABLE_16
CABLE_8
Please turn the
previs backward
90 degree.
24
LINE-Core M
PART2-3
LSM-micro(ID06) X1
THIGH X1
F6 X4
CABLE_6 X1
NUT X4
CABLE_10 X
CABLE_6
②
①
Please notice the groove
in LSM-Micro (Up side)
LSM-micro ID0
CABLE_6
25
CABL E_1
PART2-4
F6 X4
PART2-2
CABLE_6
①
②
CABLE_10
Please refer to No.1 picture, neaten
cable.6 first.
26
NUT X4
LINE-Core M
PART2-5
LSM-micro(ID04) X1
ANKLE X1
F6 X4
NUT X4
Please notice the groove in LSM-Micro (Up side)
slope side
LSM-micro ID0
PART2-6
LSM-micro(ID02) X1
LSM-micro ID0
27
FOOT X1
F6 X4
NUT X4
PART2-7
HORN X2
3F6 X1
PART2-8
F6 X8
CABLE_6
PART2-5
②
①
28
CABLE_6 X1
3F8 X1
NUT X8
LINE-Core M
PART2-9
SHIN-R X1
SHIN-L X1
3F6 X2
3F8 X2
B30 X2
NUT X2
PART2-4
②
②
Please rotate cable_10 one
circle before neaten.
①
CABLE_10
PART2-8
②
3F6
①
3F8
29
B30
PART2 LEFT LEG Completed
30
LINE-Core M
PART3 RIGHT ARM
PART3-1
LSM-micro(ID13) X1
31
HORN X2
3F6 X1
3F8 X1
NUT X8
PART3-2
ARM-BASE X1
F6 X4
NUT X
CABLE_14 X1
CABLE_14
It will be more convenient to neaten Cable _14 and ARM-Base
first, then assemble nut and bolt.
PART3-3
ARM X2
LSM-micro(ID15) X
3F6 X1
3F8 X1
3F6
3F8
Please Keep the groove in LSM-Micro
up side.
LSM-micro ID1
32
LINE-Core M
PART3-4
ARM-BASE X1
F6 X4
NUT X4
PART3-5
HAND-R2 X1
HAND-R1 X1
B16 X1
B30 X1
NUT X2
Please inset the nuts into Hand-R2
PART3-4
①
②
②
③
B30
B16
33
①
PART3-6
NUT X1
B16 X1
CABLE_14
①
PART3-5
②
Please notice the direction
when assemble PART3-2
and PART3-5.
PART3-2
②
①
PART3 RIGHT ARM Completed
34
LINE-Core M
PART4 LEFT ARM
PART4-1
LSM-micro(ID14) X1
35
HORN X2
3F6 X1
3F8 X1
NUT X8
PART4-2
ARM-BASE X1
F6 X4
NUT X
CABLE_14 X1
CABLE_14
It will be more convenient to neaten Cable_14 and Arm-base first, then a
ssemble nut and screw.
PART4-3
LSM-micro(ID16) X
ARM X2
3F6 X1
3F8 X1
3F6
3F8
Please keep the groove in LSM-Micro
Up side.
36
LSM-micro ID1
LINE-Core M
PART4-4
ARM-BASE X1
NUT X4
F6 X4
PART4-5
HAND-L1 X1
B16 X1
HAND-L2 X1
NUT X2
B30 X1
Please insert the nut into Hand-L2
PART4-4
①
①
③
②
B30
37
②
B16
PART4-6
B16 X1
NUT X1
CABLE_14
①
Please notice the direction
of Part4-2 and Part4-5 when
PART4-2
assembling.
②
②
①
PART4 LEFT ARM Completed
38
PART4-5
LINE-Core M
PART5 HEAD & BODY
39
PART5-1
LSM-micro(ID11) X1
HORN X1
3F8 X1
NUT X4
Please put the horn spinning 60 degree
to right side.Please keep the groove in
LSM-Micro and horn the same position.
(up side)
60°
Please keep the groove in LSM-Micro
and Horn the same position.(up side)
PART5-2
LSM-micro(ID12) X1
HORN X1
3F8 X1
NUT X4
Please put the horn spinning 60 degree to right
side.Please keep the groove in LSM-Micro and
horn the same position.(up side)
60°
Please keep the groove in LSM-Micro and horn the
same position.(up side)
40
LINE-Core M
PART5-3
Please keep the groove in LSM-Micro and horn the
same position.(up side)
PART5-4
BODY-UP X1
B5 X4
LSM-micro ID1
41
PART5-5
CABLE_8 X1
LSM-micro ID18
Please notice the direction when assemle
LSM-Micro(ID17) and LSM-Micro(ID 18).
Assemble the back port of LSM-Micro to
up side and the ID port of LSM-Micro to
down side
CABLE_8
LSM-micro ID17
The screw in LSM-Micro(ID17) and body up
will finish in Part5-8
PART5-6
F6 X4
42
NUT X4
CABLE_8 X1
LINE-Core M
PART5-7
F6 X4
NUT X4
CABLE_8 X1
CABLE_10 X
43
PART5-8
BACK X1
F8 X4
NUT X4
①
LSM-micro ID1
②
If put a drop of glue into the groove, the
nut will not fall out.
44
LINE-Core M
PART5-9
BODY-DOWN X1
F5 X4
Please insert the nut into Body-up first.
①
②
If put a drop of glue into the groove, the
nut will not fall out.
45
NUT X2
PART5-10
HORN X2
3F6 X1
3F8 X1
NUT X8
HORN X2
3F6 X1
3F8 X1
NUT X8
PART5-11
46
LINE-Core M
PART5-12
F6 X8
PART5-9
①
CABLE_16
②
LSM-micro ID10
PART5-11
①
CABLE_16
②
LSM-micro ID0
PART5-10
47
PART5-13
BATTERY CASE X
F8 X8
CABLE_16
①
②
①
CABLE_16
48
Please neaten
Cable-16 as the
picture showed.
LINE-Core M
PART5-14
F6 X12
SHOULDER X1
CABLE_12 X
49
PART5-15
F6 X12
SHOULDER X1
CABLE_12 X
50
LINE-Core M
PART5-16
CHEST X1
F6 X4
NUT X2
PART5-17
BATTERY COVER X
LSC-m X1
P6 X1
BATTERY X
①
②
PC Special port
LSM-Micro connect port
There is 6 connect ports in left and right side of
LSM-Micro. The cable can connect to any port in
LSM-Micro( PC port can not)
51
Please connect the wire of LSM-M and
battery first. Please connect the wire as
left side picture showed
Red
Red
Black
Black
①
②
PART5 HEAD & BODY Completed
52
LINE-Core M
8. The introduction of LINE Maker App
User can use LINE Maker App to control and program the robot.
Can control the robot as a remote controller
Can program the robot motion
Can adjust zero degree and check the robot
※
LINE-Core M already included basic motions, can compile other
favorite motions to humanoid on LINE Maker APP.
- you can scan the barcode which in the last page of book to download
LINE Maker App.
53
9. How to confirm the basic motion of LINE-Core M?
Except the basic motion, Line-Core M also offer Boxing, Soccer,Dance and Mission modes. In order to
let LINE-Core m finish the mission more better, We need confirm the basic motion and adjust zero
degree.
1. Run LINE Maker App, choose controller. It will enter control interface.
2. Please turn on the power before we connect the robot with phone. -The buzzer and LED2 blue
light will flash when opened.
LED1
Power switch
LED2
LED 2 will flash blue light with buzzer sensor
54
LINE-Core M
3. Please press B1 button. -- when power on, LSM-Micro LED1 blue light will on, LED2 blue
light will flash.
LED1
LED2
B1 button
LED 1 blue light on , LED 2 blue light flash
4. Please press B1 button again, -LED1 will become green light and LED2 will become blue light and
flash.
LED1
LED2
B1 button
LED1 green light on，LED2 blue light flash
Button
Power
Press B1 one time
Press B1 two times
LED
LED1
Function
LED2
Robot power on status --- can connect phone via
Flash
bluetooth and download program
Power on, but can not run program. ---program
Flash
motion, change ID, slight change zero degree
Power on and can run program. --Can use phone to
Flash
check basic motion
55
5.After press
button, then press
button.
6. Please choose yes after the bluetooth interface appear in your phone.
※
If the bluetooth in your phone is open. Then it will enter this interface as No7
7.Please click Scan, and choose robot ID.
56
LINE-Core M
8. After connected. The bluetooth button will change color.
9. You can press
to confirm LINE-Core M basic motion.
57
10. Adjust Zero degree
The motion our company provided is based on our humanoid robot, if the user changed the default
in LSM-Micro or assemble in different way, the robot may fall down or not stable when run the basic
motion, in this case, we need adjust zero degree.
10-1. Adjust zero degree and basic motion
1. Close the power of LINE-Core M, please flatten the LINE-Core M and put on ground
2. ID01 and ID02, ID 09 and ID 10 is the axis which can move in LSM-Micro. We put the robot knee
and toe touch the ground. Please be gentle to put these part touch the ground.
LSM-micro ID09
LSM-micro ID10
SHIN
SHIN
LSM-micro ID02
③
Press the battery case
and let it touch the
ground
LSM-micro ID01
②
Press the toe, Let toe
touch the ground.
① Press the knee, Let
this part touch the ground
58
LINE-Core M
The following picture of Humanoid without arms is better to understand.
The chest and belly is not fully touched the ground.
Please place the toes in horizontal line.
The legs should unbend as below showed.
59
3. Please neaten the wire of LSM-Micro ID13 and ID14, then put the arms touch robot body.
The wire in this part
should be flatted.
Do as the picture showed and
let the arm touch body.
ID13 and ID14 of LSM-Micro will
entirely fit the shoulder
4. Put LSD-Micro ID15 and ID16 and two hands touch the groud.
① Press LSM-Micro ID15 and ID 16
② Press hand.
one side of LSM-Micro
ID15 and ID16 touch the
groud.
one side of hand touch the
ground
60
LINE-Core M
5. Press B1 first, then turn on the power, after power open, keep press B1 around 2 second.
61
10-2. Slight change on LSM-Micro Zero degree
You can do slight change on LSM-Micro in the following situation
▶ The robot still not stable after adjusted zero degree and basic motion.
▶ The robot can dance with suit, after equiped with suit, the center of gravity will change, at this
time, we just need adjust the part of LSM-Micro to find the center of gravity.
1. Run LINE Maker App, choose Controller, enter control interface.
2.Open robot power, press B1 two times.
LED1
Power switch
LED2
B1 button
LED 1 green light on, LED 2 blue light flash
62
LINE-Core M
3. Press bluetooth buttone, please bluetooth
4.If your phone opened bluetooth, please choose yes and choose scan if your phone enter bluetooth
connection window.
5. Choose robot ID, then the bluetooth button will change color after connected sucess.
63
6. Please press
7.
button to let the robot enter basic motion
Back to the home and choose robotset
64
LINE-Core M
8. Press B2 button one time
LED1
B2
LED2
Button
LED 1 blue light on, LED 2 blue light flash
Button
①Power
②Press
③Press
④Press
⑤Press
LED
LED1
Flash
B1 one time
B1 two times
B2 one time
B2 Two times
Function
LED2
Flash
Flash
Robot power on status --- can connect phone via
bluetooth and download program
Power on, But can not run program. ---program
motion, change ID, Slight change zero degree
Power on and can run program. --can use phone to check
basic motion
Flash
End current program-- the same status as No.2
Flash
Cut LSM-Micro Power, --the same status as No.1
9. Press Zero comp button, choose ISM-Micro ID as below picture showed
LSM-micro ID 输入部
65
10. Please choose the LSM-Micro ID which need adjust zero degree. Press ◀ and ▶ button to
adjust zero degree. The range for adjust zero degree is -12 to 12 degree.
11. As the above picture showed, Press ◀ and ▶ button can adjust zero degree in LSM-Micro, and
save the degree after changed every time.
66
LINE-Core M
10-3. change the gravity center after equipped with suit.
If equipped with suit, the center of gravity will change, in this case, we need change the center of
gravity in the robot.
Please check below steps to change the gravity center back
Right leg
Left leg
ID08 Clockwise side
ID 07 Anticlockwise side
ID05 Clockwise side
ID06 Anticlockwise side
ID03 Anticlockwise side
ID04 Clockwise side
67
1.~9. Please refer to No1-No9 steps, it is the same way to slight change.
10. Please check below steps
Please press ◀ to anticlockwise rotate
ID03 motor
11. Please check
below steps
Please press ▶ to clockwise rotate ID
04
to change right leg zero degree( LSM-Micro ID03, ID05, ID07)
Please press ▶ to clockwise rotate ID
05 motor
Please press ◀ to anticlockwise rotate
ID07 motor
to change Left leg zero degree( LSM-Micro ID04, ID06, ID08)
Please press ◀ to anticlockwise rotate
ID06 motor
68
Please press ▶ to anticlockwise rotate
ID08 motor
LINE-Core M
12. As the above picture showed, Press ◀ and ▶ button can adjust zero degree in LSM-Micro, and
save the degree after changed everytime
11. How to run Line Maker App
11-1. CONTROLLER
We can use the smart phone as a remote controller to control the robot.
1. Run Line Maker App, choose Controller, enter control interface.
69
2. Please press B1 two times after power on.
LED1
Power switch
LED2
B1 button
LSM-Micro power on, LED1 Green
light on, LED2 Blue light flash
※The LED setting different, the program will different, please refer to page 65 tip.
3. After press bluetooth button, pease press bluetooth.
4.
4. Please choose yes after bluetooch interface appear in your phone, please choose scan if your
phone showed bluetooth connection.
70
LINE-Core M
5. Please choose robot ID, the bluetooch will change color if connected success.
11-1-1. How to control robot
LINE-Core M include basic motion, Boxing, Soccer,Dance, Mission and many other modes, please
check below steps to confirm every mode.
71
Serial
Serial
Button
Motion
No
Motion
No
Basic Ready motion(bend knee
and stand)
Stand
up
down(frontside)
Move forward
10
Front flip
Move Backward
11
Back flip
Move left side
12
Bend and Salute
Move right Side
13
Wave and Salute
Turn Left
14
Victor
Turn right
15
Fail
Stand
up
when
down(backside)
when
Button
fall
fall
Basic Motion
Front Boxing Mode
Serial
press
Motion
No
Serial
Button
No
Ready
10
Defense
11
Button
left wrist shot
Left Uppercut
Right Straight Punch
Move Forward
12
Move Backward
13
Move left
14
Move Right
15
Turn Left
16
Turn Right
17
Motion
Right wrist shot
Right Uppercut
Two hand Straight punch( right
hand first, then left hand)
stand up when fall down(Back
side)
Stand up when fall down(Front
Left hand stab
Flank Boxing Mode
Serial
Motion
No
press
Serial
Button
No
Motion
Ready( parting legs, head and
waist turn left)
Shoulder attack(left shoulder)
Defense
10
Wrist attack(left wrist)
Move Forward
11
Stab(left shoulder)
Move Backward
12
Rotate attack
Move left
13
Right hand stab
Move Right
14
Turn Left
15
Turn right
16
72
Right hand stab, left hand
straight attack
Stand up when fall down(back
side)
Stand up when fall down(from
side)
Button
LINE-Core M
Soccer Mode
Serial
press
Motion
No
Serial
Button
No
Motion
Ready
10
left foot Shoot slightly
Move forward(fast)
11
right foot shoot slightly
Move Backward(fast)
12
left foot shoot heavily
Move left(fast)
13
right foor shoot heavily
Move right(fast)
14
goalie cover the shot(left hand)
Turn left(fast)
15
Turn right(fast)
Move
forward
left(fast)
Mover forward
right(fast)
16
and
turn
and
turn
Motion
No
18
Goalie cover the shot(parting
legs and sit down)
Goalie cover the shot(right
hand)
Stand up when fall down(back
side)
Stand up when fall down(front
side)
press
Mission Mode
Serial
17
Serial
Button
No
Ready
Move forward in quick short
steps
Move backward in quick short
steps
Motion
10
Hold the object move backward
11
Hold the object move left
12
Hold the object move right
Move Left in quick short steps
13
Hold the object turn left
Move Right in quick short
steps
14
Hold the object turn right
Turn left in quick short steps
15
Turn right in quick short steps
16
Sit down and use two hands
grab 5CM object and stand up
17
Hold the object move forward.
18
Mission Two mode
Serial
No
Motion
Button
Put down the object in stand
status.
Put down the object in sit down
status
Stand up when fall down(back
side)
Stand up when fall down(front
side)
press
Serial
Button
No
Motion
Go prone in front side
Go prone and turn right
Go Prone and move forward
Go prone and stand up
Button
Go prone and turn left
73
Button
11-1-2. Download Process file
Provide LINE-CORE M Basic motion, Boxing, Soccer, Dance, Mission and other mode program file.
User can download from here if deleted basic motion or other files by mistake,
1. Run Line Maker App, and choose process
2. Open Process Start window, choose Example, and choose the program you need and press Apply
button
74
LINE-Core M
3. Please turn on LINE-Core M first.
电源开关
LED1
LED2
LED 2 blue light flash with Buzzer sensor
※ Different LED light will run different program, please refer page 65.
4. Please press
button in Process window, and then press Bluetooth
75
5. Please choose yes if the bluetooth interface open in your phone
※ if bluetooth open in your phone, Please refer to No.6
6. Please press Scan, and choose robot ID, the bluetooth will change color after connected success.
76
LINE-Core M
7. Download the file you need. Please press
please press confirm.
button to confirm download, after completed,
if download failed, Please restart
from 1.
8. The LED 1 will become green after download success, user can confirm basic motion from
controller now.
77
12. Change LSM-Micro ID
Line-Core M made by 18 LSM-Micro(ID01-ID18). We need change LSM-Micro id in case the ID repeat
if you want to buy new motor or change motor in the future
1. Run LINE Maker App, choose RobotSet
2. Turn on the power and press B1 button
LED1
Power switch
LED2
B1 button
LSM-Micro power on, LED1
Blue light on, LED2 blue light
flash
※ Different LED will run different program, please refer to page 65
78
LINE-Core M
3. press
button in Robotset window and then press bluetooth button
4. Please choose yes if your phone remind you open bluetooth
※ If bluetooth already open in your phone, please refer to No5.
79
5. Please press Scan, and choose robot ID, the
button will change color after connected success
6. There is two ways for change the ID of LSM-Micro
If the robot finished assembly, please do not use Motor
ID set change ID.
Motor ID S
- Change all LSM-Micro which connected with LSC-M into the same ID.
- If only need change one motor ID, Please connect the motor which need
change ID with LSC-M, Then change ID
- If you want to change the ID of the motor that you do not know the ID, Just
need connect this motor with LSC-M and change ID.
Motor ID Chang
- If Connect one or many LSM-Micro to LSC-M, it can only change one
LSM-Micro ID.
- The id of LSM-Micro which buy as spare parts is No.00, if you want to change the ID of spare LSM-Micro, please use Motor
ID Set, it will only need connect one LSM-Micro that need change ID to LSC-M
- The range for ID change is 1-253.
80
LINE-Core M
7. Press Motor ID Set Button. As below picture showed, after you pressed ID input button, it
will show the number of ID.
LSM-micro ID 输入部
8. Choose the ID that need change, then press Set button.
- After changed ID, It will show the changed ID information.
- If change ID failed, please restart from No.1
- All the LSM-Micro which connected with LSC-M in Motor ID Set will become to the same ID, so please do not use Motor ID
set under the situation that robot finished set.
- If only need change one ID of LSC-Micro, we just connect the LSC-Micro which need change ID to LSC-M.
81
9. How to change the ID of
LSM-Micro by using Motor ID Change
Press Motor ID Change button, it will enter the interface as below showed
Before ID
change
After ID
change
10. When you want to change ID 02 to ID 07, please press change as below picture showed.
- After changed the ID, it will show the changed ID information
- If change ID failed, please restart from No.1.
-It can only change in LSM-Micrto ID by using Motor ID change, no matter how many LSM-Micro connected to LSC-m
82
LINE-Core M
13. How to assembly LINE-Core M suit?
LINE-Core M can do a performance after equipped with different suit. The way for equip the suit is
insert the suit into LINE-Core M frame. It is more faster and convenient to change robot role.
17
18
17
19
20
10
11
11
12
21
12
13
14
14
13
15
16
83
21
84
LINE-Core M
85
Insert Sword 1--Insert the sword into the back of hand.
Insert Sword 2-- Insert the sword into hand
86
LINE-Core M
Completed!
Notes
- After equipped with suit, the gravity center of LSM-Core M will change, we need use slight change to find the right
gravity center.(please refer to page 62-68)
- There is some bluge part in the helmet, please be careful when do some motions such as front flip or back
flip.
87
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 0.5cm between the radiator
& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
LINE-Core M
First Edition │ 2016.06.20
Publisher │ MRT International Limited
Company name │ Hitechpia Technology(shenzhen) Co.,Ltd
Address │ Room210, No1. Maker Zone, China&Canada&Korea International Maker
Park, No.78, Dabao Road,Zone 28, Baoan District, Shenzhen China
Tel │ 0755-8635-0915
Layout&Execution │ MRT ROBOTICS
※ The copyright owned by MRT International Limited, can not be printed or for
PDF use.
88

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Administrator
Comments                        : 
Company                         : 
Create Date                     : 2016:10:20 17:58:52+09:30
Modify Date                     : 2017:07:12 18:28:49+09:00
Source Modified                 : D:20161020175852+09'58'
Subject                         : 
Trapped                         : false
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Description                     : 
Title                           : 
Creator Tool                    : WPS Office
Metadata Date                   : 2017:07:12 18:28:49+09:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:2dd99ebe-1aae-454d-9120-dee7c3fc4553
Instance ID                     : uuid:74677fa5-3405-4f1d-967d-92885a888116
Page Count                      : 88

EXIF Metadata provided by EXIF.tools