MUL T LOCK TECHNOLOGIES ENTRWRT00 ENTR Touchpad Reader User Manual ENTRR Fingerprint Reader FCC IC

Download:
Mirror Download [FCC.gov]
Document ID	3248289
Application ID	X4QTZrUxFDNCev6T9HuyxA==
Document Description	Users Manual Part 2.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	168.88kB (2111040 bits)
Date Submitted	2017-01-05 00:00:00
Date Available	2017-07-04 00:00:00
Creation Date	2016-12-27 17:50:47
Producing Software	PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Document Lastmod	2016-12-27 17:50:54
Document Title	ENTRR Fingerprint Reader_user manual_FCC,IC.pdf
Document Creator	PDFCreator Version 1.2.3
Document Author:	suhsiao

Y I ENTR‘ I
.MUL-‘r-Locx‘
m mg.“ m:
5. Touchpad Reader Operation
5.1 Operation
To turn the Touchpad Reader 0N press [it] for 5 seconds. The reader will perform a
self test followed by series of beeps. LED blinks Green, Red, Blue.
5.2 Pairing Touchpad Reader
This procedure is done via the ENTR® lock. See also: Pairing Remote Control.
1 III‘ 2 ill‘ 3
Touch ENTRo lock screen with palm Press [Add] Numeric buttons illuminated.
or fingers for 3 seconds to active. Type [PIN code] lll‘ [fl]
Numeric buttons blinking.
Mute Clg Del Mute C19 Flt-h iii ': [rel
1 2 3 1 2 3
A 5 #
.de d
v” 5‘? fl
4 in» 5
Press [1] to add Touchpad. Touch the Touchgad Reader screen
Illuminated buttons turn off. with palm or fingers.
[ox indication blinks for 15 seconds Press [17] m‘ [u]
waiting for the Touchpad. Blue LED blinking rapidly.
Huts: Cfg [Lul
22 ENTR® Dead Bolt User Manual
I. Mul—T—LDCK‘
Pairing OK Pairing failed
[0K] indication blinks once, OK] lfldlcafiol’l blinks for 15 seconds,
2 short beeps emitted. No beeps emitted.
Touchpad Reader added.
In wall reader: Green LED illuminated
and 2 beeps emitted.
Start the process from stage 1.
- Hang the Touchpad Reader on the base plate.
- Tighten fixing screw.
Fixing screwr I
I ENTR’ I
m mm m;
ENTR® Dead Bolt User Manual
23
V I ENTR’ I
,MUL-‘r-Loclr
m men; mi
5.3 Touchpad Reader Master PIN Code
1 ni‘ 2 III. 3
Touch screen with palm or fingers Enter [New master PIN code] Reenter:
Press [11] in. [#1 (4-10 digits) ill‘ [a] [New master PIN code] "IQ m
For Example: 123123101
Master PIN code added Master PIN code not added
Green [OK] illuminated for 1 second. Red [Error] illuminated for 1 second.
2 short beeps emitted. 1 long beep emitted.
5.4 Menu Mode
Entering menu mode: Press [*1‘". [Master PIN code] mo [#1
5.5 Adding PIN Code (up to 20 different codes)
1 III‘ 2 III» 3
Touch Reader screen with palm Enter [Personal pm code] Retype:
or fingers‘ (4710 dlglts) inQ [a] [Personal PIN code] ian [w]
Press [*] Ill. [Master PIN code] For example: 123123491
up [a]
Press [11] III. [It]
PIN code added PIN code not added
Green [0K] illuminated for 1 second, Red [Error] illuminated for 1 second,
2 short beeps emitted 1 long beep emitted.
24 ENTR® Dead Bolt User Manual
I ENTR‘ I
m mess rm
In Mlll.-'I'-LIII:I(z
5.6 Open Door
1 III‘ 2
Touch Reader screen WIth palm or fingers.
Not opening
Red [Error] illuml'nated for 1 second,
1 long beep errllttedr
Press [Personal PIN code] lll‘ [It]
5.7 Lock Door
1 In» 2
Touch Reader screen with palm or fingers, Press [1] l... [a]
Not locking
Red [Error] illumlnated for 1 second,
1 long beep emitted.
5.8 Delete PIN Code
1 ”IQ 2
Touch Reader screen with palm or fingers.
Press [*1 luQ [Master PIN code] luQ [#1
Press [33] m. [a]
For delenon enter:
[Personal PIN code] rnQ m
Personal code deleted Personal code not deleted
Green [OK] illuminated for 1 second,
2 short beeps emitted,
Red [Error] illumlnaKEd for 1 second,
1 long beep emitted
5.9 Delete all PIN Codes
1 nl’ 2
Touch Reader screen wnh palm or fingers, Enter [Mafia]! pIN code] nl’ [a]
Press [*1rlrQ[Masrer pm code] nQ [a] Remy; [Master pm code] n. [a]
Press [22] lll. fl]
Personal PIN codes deleted
Personal PIN codes not deleted
Green [0K] illumlnated for 1 second,
2 shorr beeps emined.
Note: Master PIN code can not be deleted.
Red [Error] illumlnated for 1 second,
1 long beep emitted.
ENTR® Dead Bolt User Manual
25
In Mlll.-'I'-LIII:I(z
5.10 Volume Control
1 In» 2
I ENTR‘ I
m mm m:
Touch Reader screen With palm or fingers. Press [2] to increase the Volume, or [a] to
Press [*1 "Q [Master pm Code] m [a] decrease the volume
Press [55] ill‘ [a] Press [a] to confirm volume level.
5.11 Factory Reset
The reset action will delete a_H PIN codes (master and personal) and will cut off the
Touchpad Readerfrom the ENTR® lock.
1 III’ 2
Touch Reader screen with palm or fingers. Enter [Master PIN code] Ill» [of]
Press [*1 in. [Master PIN code] in. [#1
Press [99] HQ {#1
Personal and master PIN
codes deleted
Personal and master PIN
codes not deleted
Green [OK] illuminated for 1 second.
2 short beeps emitted.
Devlce performing self test 8‘ Is factory reset.
Red [Error] illuminated for 1 second.
1 long beep emitted,
26
ENTR® Dead Bolt User Manual
Y I ENTR‘ I
anll-T-LDCK’
m mm m:
6. Fingerprint Reader
6.1 Mounting the Fingerprint Reader \
Prior to starting, select the location where
the Fingerprint Reader is to be mounted.
Avoid direct sun light to the front panel.
- Attach the Fingerprint Reader base plate
to the wall.
0 Use 4 screws and screw anchors or
double sided glued tape.
6.2 Battery Replacement
1. Using a 2mm Allen key release the lid
screw and open the lid.
2. Insert batteries (ZXAA) according to the m l
"+" "-" signs. Green LED will illuminate U
for 2 seconds. : , T
3. Close the lid and tighten the screw. _ --_-‘
O O
4. Press [ii] for 5 seconds. a
The reader will self calibrate, which will be followed Lk
by a series of beeps and blinking LEDs.
6.3 Adjust Date & Time
DEVICE --I--I-- 24/09/16
DATE/TIME lilj ®
DD/MM/YY 11:00
Enter Date Enter Time Press [OK]
Press [OK] Press [OK]
ENTR® Dead Bolt User Manual 27
Y I ENTR‘ I
aMllL-T-LDCK’
m wear rm
6.4 Pairing Fingerprint Reader
This procedure is done via the ENTR® lock.
See also: Pairing Touchpad Reader.
1 nr‘ 2 ill‘ 3
Touch ENTR” lock screen With palm Press [Add] Numeric buttons illuminated.
ar fingers for 3 seconds in active Type [pm code] ruQ [a]
Numeric buttons blinking,
Mule Gig Dal
Mule Gig
4 "W 5
Press [11m add the reader Touch Fingerprint Reader screen.
Illuminated buttons turn off, 2 short beeps emitted.
[0K indication blinks for 15 seconds Press [OK] for YES or [*1 to cancel.
waiting for the reader.
Cfg l —: PAIR LOCK?
e ‘ : *-NO OK-YES
r .
l // : ® r ’
r r
Pairing OK Pairing failed
[OK] indication blinks once. 1 long beep EmiHEd-
2 short beeps emitted. Red LED illuminated for 2 seconds.
Fingerprint Reader added.
LOCK FAILED
PAIR PAIR
Note: At the end of the initial pairing process,
a short notice will be displayed.
28 ENTR® Dead Bolt User Manual
Y I ENTR‘ I
aMllL-T-LDCK‘
m rnrenr rm
6.4.1 Add Master User
Setting a Master User requires both fingerprint and PIN code. It is possible to have up to
two Master Users.
can press and hold the [*1 key to move to standby ode.
MASTERNAME MASTER #01
Q)
JOHN
Type in [Master name] ”Q [ox]
6.4.2 Set Finger
Blue LED illuminates. Green LED blinking.
SUCCESS
1ST FINGER
ADD USER
SET FINGER
15T FINGER
Press [OK] Place finger on scanner, wait
for beep, then swipe finger
down several times over
fingerprint scanner until two
confirmation beeps emitted.
Green LED blinking.
SWIPE
2nd FINGER
SUCCESS
2nd FINGER
Place finger on scanner, wait
for beep, then swme finger
down several times over
fingerprint Scanner until two
confirmation beeps emitted.
6.4.3 Set PIN Code
Type in [PIN Code], (4 to 10 digits) Retype [PIN Code]
ADD USER ENTER CODE RETYPE CODE
SET CODE “W mm
4-10 digits 4-10 digits
Press [OK] Press [OK] Press [OK]
Matched Codes Mismatched Codes
SUCCESS FAILED
Q) &
SET CODE INVALID
ENTR® Dead Bolt User Manual 29
Y I ENTR‘ I
.MUL—‘r—Locx‘
m mu; m:
- Hang the reader on the base plate.
- Tighten fixing screw.
Fixingscrew , I
6.5 Unlock the Door
OPTION 1: OPTION 2:
Place finger on fingerprint scanner. Touch the Fingerprint Touchpad.
Short beep emitted & white LED is on Screen shows user code.
Swipe finger over fingerprint scanner Enter your code lll‘ [0K]
Fingerprint authorized: Blue LED blinking
and unlock command is sent.
Fingerprint not authorized: Red LED is ON.
The device goes to standby.
USER CODE
23:49 03/01
FAILED
Note: In case ENTR® lock hasn’t succeed to unlock the door,
unlock failed message appear on the screen.
UNLOCK
30 ENTR® Dead Bolt User Manual
V I ENTR’ I
,MUL-r-Loclr
m mm; m;
6.6 Lock the Door
Touch the Fingerprint Touchpad.
Press [1] "9 [tr]
6.7 Low Battery Indication
Warning signal blinking.
Fingerprint Reader low batteg indication
Red LED illuminate for 15 after wake—up,
2 long beeps emitted.
G]
BATTERY LOW
15 2.3: 35;; ,‘
m 5.“ on? j‘
5 7m 8;“; ,
6.8 Setting Menu
USER CODE MASTER CODE [SETTING
Touch screen Ill’ ****** .1 USERS
23:49 03/01 23:49 03/01
Press [*1 Enter [Master PIN code] uiQ [OK] or
swme finger over fingerprint scanner
ENTR® Dead Bolt User Manual 31

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2016:12:27 17:50:54+08:00
Create Date                     : 2016:12:27 17:50:47+08:00
Metadata Date                   : 2016:12:27 17:50:54+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Format                          : application/pdf
Title                           : ENTRR Fingerprint Reader_user manual_FCC,IC.pdf
Creator                         : suhsiao
Document ID                     : uuid:7f248aa4-cfc1-475c-951b-298b7151a950
Instance ID                     : uuid:f761be9b-b630-4e35-93e0-bd2104ed0b60
Producer                        : PDF-XChange Viewer [Version: 2.0 (Build 40.7) (Nov 25 2008; 17:31:42)]
Page Count                      : 10
Author                          : suhsiao

EXIF Metadata provided by EXIF.tools