Makita BUB360 BUB182 SC01 User Manual To The 89c73489 1265 4396 B31e 89a020621fec

User Manual: Makita BUB360 to the manual

Open the PDF directly: View PDF .
Page Count: 5

Download
Open PDF In Browser	View PDF

T

ECHNICAL INFORMATION

Models No.

BUB360

Description

Cordless Blower 36V

PRODUCT
P 1/ 5
H

L2

CONCEPT AND MAIN APPLICATIONS
Model BUB360 is a cordless blower powered by 36V/ 2.6Ah
Li-ion battery BL3626. This model will be one of the best choice
for use especially in public spaces or among residential areas
instead of gas-powered blowers.
Features High/ Low push button for two different air volume settings.

L1
W

This product is available with the following model number
and specifications.
Model No.

Charger Battery Battery cover

BUB360Z

No

No

Dimensions: mm (")
Length (L1)
921 (36-1/4)
Length (L2)
436 (17-1/8)
Width (W)
142 (5-5/8)
Height (H)
204 (8)

No

The model also includes the accessory listed below
in "Standard equipment".

*L1: Length with Long nozzle
*L2: Length with without Long nozzle

Specification
BUB360

Model No.

Battery

Voltage: V
Capacity: Ah

36
2.6

Cell
Charging time (approx.): min.
High
No load speed: min-1 = rpm
Low
High
Max air volume*1:
m3/sec (m3/min.) [ft3/min.]
Low
Max air velocity*2: m/sec

High
Low

Air volume setting function
High
Continuous run time (approx.)
on a single full battery*1: min.
Low
Vacuum function
Variable speed control by trigger

Li-ion
22 with DC36RA
17,000
10,000
0.073 (4.4) [160]
0.043 (2.6) [92]
93
57
Yes (2 settings: High/ Low)
14
30
No
No

Weight according to
EPTA-Procedure 01/2003*4: kg (lbs)

3.1 (6.8)

*1 without Long nozzle
*2 with Long nozzle
*3 with Battery BL3626
*4 with Battery BL3626 and Long nozzle

Standard equipment
Long nozzle .................. 1
Shoulder strap ............. 1
Note: The standard equipment for the tool shown above may differ by country.

Optional

accessories

Battery BL3626, Charger DC36RA, Battery adapter BAN36N

P 2/ 5

Repair
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

[1] NECESSARY REPAIRING TOOLS
Description

Use for
Socket bit 8-55 (width across flats: 8mm) Disassembling/ Assembling M5-8 Hex nut for Fan 95

[2] DISASSEMBLY/ASSEMBLY
[2]-1. Fan, Armature
DISASSEMBLING
(1) Remove Carbon Brush as illustrated in Fig. 1.
Fig. 1
Remove two Brush holder caps and Carbon brushes.

Remove two Holder cap covers by
levering up with Slotted screwdriver.

Carbon brush

Holder cap cover
(2pcs.)

Brush holder cap (2pcs.)
(2) Separate Housing set (R) and take out Motor section as illustrated in Fig. 2.
Fig. 2
Remove 13pcs. of 4x18 Tapping screws.
And separate Housing set (R) from Housing
set (L).
Housing set (R)

Separate Motor section (Endbell complete, Armature,
Yoke unit, Fan 95) from Housing set (L).
Note: Do not lose Hanger
Housing set (R)

Hanger

Housing set (L)

Motor section
(3) Fan 95 and Armature can be replaced as illustrated in Fig. 3.
Fig. 3
1. Separate Motor section
from Endbell complete.

2. Hold Fan 95 by hand and turn M5-8 Hex nut for Fan 95
clockwise using cordless impactdriver with Socket bit 8-55.
Note: M5-8 Hex nut has a left handed thread.
Yoke unit
Socket bit 8-55

Endbell
complete

Cordless impactdriver

Armature

Fan 95

Flat washer 8

Fan 95

Fan 95

M5-8 Hex nut
Flat washer 5

P 3/ 5

Repair
[2] DISASSEMBLY/ASSEMBLY
[2]-1. Fan, Armature (cont.)
ASSEMBLING
Take the disassembling step in reverse.
Note: 1) Do not forget to set Flat washer 5 and Flat washer 8 in place. (Fig. 3)
2) Fit two notches of Yoke unit to two protrusions on Housing set (L). (Fig. 4)
3) Before assembling Housing set (R), mount Hanger on Housing set (L) and (R). (Fig. 2)
Fig. 4

Fan 95

two protrusions of Housing set (L)
two notches
of Yoke unit

[2]-2. Switch unit
DISASSEMBLING
(1) Remove Housing set (R) from Housing set (L). (Figs. 1 and 2)
It is not necessary to remove Motor section.
(2) Remove Switch unit by disconnect Connectores as illustrated in Fig. 5.
Fig. 5
Switch unit

Connector of Switch unit
Connector of Controller
Controller

ASSEMBLING
Take the disassembling step in reverse.

Housing set (L)

P 4/ 5

Circuit diagram
Fig. D-1
Color index of lead wires' sheath
White
Blue

Black
Red
Yellow

Connect Line filters as illustrated below if they are used.
Terminal

Housing set (L) side
Line filter

Line filter

Endbell
complete

Controller
Line filter

Switch
unit

Housing set (R) side

P 5/ 5

Wiring diagram in Housing set (L)
Fig. D-2

Line Filter
Pass Line filter’s Lead wires (black, red)
through Line filter, and then put the Line
filter as illustrated below.

Guide Switch units’s Lead
wires between Ribs
carefully not to put them
on the Ribs.

Endbell Complete

Put Connectors to the position
illustrated below, and fix
the Lead wires of Switch unit
and Controller with Lead wire
holders.

Fix the following Lead wires with
these Lead wire holders.
* Endbell’s Lead wires (black, red)
* Controller’s Lad wires (black, red)
Line filter
Put Insulated
connectors here.

Rib
Connector

Rib

Line filter
Do not pass Controller’s
lead wire (yellow) between
Rib and Terminal.

Terminal

Endbell
complete

Yoke unit

Wire connecting portion
Fan 95

Flag connector

Controller

Passing Controller’s Lead wires (black, red) through Line filter,
coil them one time to Line filter as illustrated below.

Terminal

Line filter

Line filter

to
Terminal

Lead Wire Holder
Motor section side
The Flag connector has to be
connected so that its wire
connecting portion faces
Motor section side (front side).

Fix the Lead wires with Lead wire holder.
In case of the specifications without Line filter,
no need to fix the lead wires with Lead wire holder.



---

Source Exif Data:

File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2010:05:07 16:55:18+09:00
Creator                         : Adobe Illustrator CS2
Modify Date                     : 2010:05:11 12:01:15+09:00
Producer                        : Adobe PDF library 7.77
Creation Date                   : 2010:05:07 16:55:18+09:00
Mod Date                        : 2010:05:11 12:01:15+09:00
Creator Tool                    : Adobe Illustrator CS2
Metadata Date                   : 2010:05:11 12:01:15+09:00
Thumbnail Width                 : 168
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 15307 bytes, use -b option to extract)
Document ID                     : uuid:E6257FF5A959DF118788B8C8252C8EEA
Instance ID                     : uuid:f9bf43e4-1159-4fb4-a21e-28ee4d662e0e
Derived From Instance ID        : uuid:d2c92783-246a-4545-a8c4-c5f17e0a9644
Derived From Document ID        : uuid:9634BC2A8659DF11B0D793AC1F26F9B6
Format                          : application/pdf
Title                           : BUB182-SC01
Page Count                      : 5
For                             : makita, makita
Bounding Box                    : 44 44 559 827
Creator Version                 : 12
Container Version               : 9
Has XFA                         : No
Image Height                    : 783
Image Width                     : 515
Image Size                      : 515x783
Megapixels                      : 0.403

EXIF Metadata provided by EXIF.tools