Mandolyn Electronic Technology RT601 Light Sensor User Manual RT100RT601 Manual

Download:
Mirror Download [FCC.gov]
Document ID	334189
Application ID	Sl+RC1gjt8y+Zu3PhEBoWw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	57.07kB (713419 bits)
Date Submitted	2003-06-23 00:00:00
Date Available	2003-06-23 00:00:00
Creation Date	2003-06-20 21:11:55
Producing Software	Corel PDF Engine Version 10.427
Document Lastmod	2003-06-20 21:11:55
Document Title	RT100RT601 Manual
Document Creator	CorelDRAW Version 10.0
Document Author:	SC

RCT100 + RT601
Programmable Timer with
OWNERS
MANUAL
Wireless Photocell Transmitter
Congratulations on your
purchase of a UPM remote
control product. Please
take the time to read and
understand this manual so
you can begin to enjoy the
convenience and energy
saving benefits this product
has to offer.
ON/OFF
place two button cell batteries
between terminals observing
proper polarity then replace cover
SET
COUNTDOWN
RANDOM
RESET
ON/OFF
In user setting mode, turn the BRIGHTNESS DIAL to adjust the light
sensitivity of the photocell sensor.
Use the LED INDICATOR (on front of transmitter) as a reference, so that
you can fine tune the light sensitivity as desired.
button descriptions
RESET
ON/OFF
SET
CD
Once you insert batteries into the transmitter, you will automatically enter
the user setting mode. This mode will last for two minutes in which you
can easily adjust the brightness or light sensitivity of the photocell sensor.
Alternately, you can press the RF button on the transmitter to enter the
user setting mode.
LEARN
place two AA size batteries into
compartment observing proper
polarity then replace cover
PROGRAM
PHOTOCELL TRANSMITTER
user setting mode
battery installation
remove the battery cover from
the transmitter
RANDOM
CD
PHOTOCELL TRANSMITTER
The LED INDICATOR of the transmitter will:
LED INDICATOR
> TURN ON - when the photocell sensor detects that it is bright
PHOTOCELL
> TURN OFF - when the photocell sensor detects that it is dark
PHOTOCELL TRANSMITTER
learn function
Plug timer into wall socket
Press and hold ON/OFF and
together on timer while
simultaneously pressing the RF
button on the transmitter. (The
green LED indicator on the
transmitter will flash when RF is
pressed).
RESET
ON/OFF
RANDOM
Slide MODE SWITCH: up for DAY mode
and down for NIGHT mode
TIMING CONTROL DIAL
setting the clock
Press SET
Day select with
RESET
ON/OFF
Hour select with
Press SET
Minute select with
MODE SWITCH
Once the learn function has been successfully executed,
the symbol will flash on the top right corner of the LCD
on the timer, every time the transmitter sends a signal or
when the RF button is pressed.
Turn TIMING CONTROL DIAL to select delay off time.
(30 minutes, 1, 2, 4, 6, 8, 10 hours, or continuous)
day mode / night mode
DAY MODE:
Repeat 1 and 2 for additional timers (available at your local retailer).
SET
CD
RANDOM
PROGRAM
3579
2 4 6 810
COUNTDOWN TIMER
Press SET
To toggle between 12/24 hour format, press RANDOM during
clock setting.
To activate/deactivate Daylight Saving Time (DST) function, press
and hold both
and
together for 3 seconds in CLOCK mode;
solid
for DST.
2468
Day select with
SET
CD
RANDOM
PROGRAM
3 57
Press SET
Hour select with
Programs are arranged in a circular pattern
with the clock and countdown functions:
CD
CLOCK
Program 1-20
Press SET
Minute select with
Press SET
disable program/master disable
Press SET
Second select with
RESET
ON/OFF
For single disable select PROGRAM with
For master disable go to CLOCK using
Press SET
Press ON/OFF to disable ( X )
RESET
ON/OFF
SET
Press SET 3 times to exit (single disable)
OR press SET 4 times to exit (master)
24
CD
RANDOM
PROGRAM
Press
once from
Press SET
4 to undo disable ( X )
Short random from
OR Long random from
short/long random
CD
Press SET
Flashing RND for short random
Flashing L- RND for long random
RESET
ON/OFF
CD
RANDOM
PROGRAM
SET
SET
Hour select with
7 Minute select with
8 Press SET
9 Second select with
10 Press SET
Press SET
* Short random 1-2 hours, long random 2-3 hours
RESET
ON/OFF
2 4 6 810
Stop countdown timer function with CD or ON/OFF
CD
RANDOM
programmable random
PROGRAM
3579
NIGHT MODE:
Transmits an “ON” command to the timer when photocell
senses a change from dark to bright. Transmits an “OFF”
command after the time delay as set by the Timing
Control Dial or when it turns from bright to dark.
Transmits an “ON” command to the timer when photocell
senses a change from bright to dark. Transmits an “OFF”
command after the time delay as set by the Timing
Control Dial or when it turns from dark to bright.
TROUBLESHOOTING
problem
solution
LCD display seems “frozen”. Buttons
won’t respond.
Press reset button to reset timer.
Timer loses programs when unplugged
Replace batteries.
Programmed ON/OFF times don’t
execute
Ensure that the program disable feature is
not enabled.
Programmed ON/OFF times don’t
execute at specified times.
Ensure that the random function is not
enabled.
Transmitter stops turning receiver on
and off.
Use the LEARN function to reprogram the
receiver or check the batteries.
Press RANDOM
Start ON or OFF select with
Press CD to start the countdown function
Repeat steps 1 to
The transmitter uses an intelligent code system to prevent interference
from other sources. But if you do experience such interference, you can
press the NEW CODE button to generate a new random house code.
However, after pressing the NEW CODE button, you will need to redo the
LEARNING procedure as described above.
RANDOM FUNCTION
The to-the-second countdown feature of this timer starts from the ON or OFF
position and counts down to zero when activated.
Program select with
Press SET
BRIGHTNESS DIAL
PROGRAM SETTINGS
Go to CLOCK using
Press SET
NEW CODE BUTTON
Photocell Transmitter
Programmable Timer
RF “TRANSMIT” BUTTON
PROGRAM
PROGRAM
SET
Select program 20 with
Solid RND for programmable
random
* Programmable random only works with program 20; 1-2 hours
Deactivate random function with RANDOM or ON/OFF
FCC / RSS-210 COMPLIANCE
This device complies with Part 15 of the FCC Rules and RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
Press RANDOM
Set program 20 to desired random time
applications
• For safety, set the photocell transmitter to trigger the
lights ON inside your doorway at dusk.
LEARN
The photocell transmitter can control multiple remote programmable timers.
RANDOM
PHOTOCELL TRANSMITTER
PROGRAM
SET
CD
PHOTOCELL TRANSMITTER
The photocell transmitter works by detecting the brightness level of its
surroundings and sends ON or OFF commands to the timer. The transmitter can
be set to trigger the timer to run for 30mins, 1, 2, 4, 6, 8, 10hrs or continuously,
and will automatically turn the timer OFF when the photocell senses a change
from dark to bright (in NIGHT mode) or bright to dark (in DAY mode).
LEARN
TIMER OPERATION
10
remove the battery cover from
the back of the timer
RESET
20 ON/OFF settings
Countdown timer
3 random functions
12/24 hour clock
15A, 1800W (resistive)
PROGRAMMABLE TIMER
433 MHz RF technology
Activates timer at dusk
or at dawn
Timing Control Dial (30mins, 1, 2, 4, 6, 8,
10hrs, or continuous
operation)
Brightness Dial - for light
sensitivity adjustment
Transmission range: up
to 40m in open area
GETTING STARTED
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
• For convenience, set the photocell transmitter to start
your coffee maker at first light.
• For security, set the transmitter to activate lights in
your home while you are away (day or night).
• For energy savings, set the transmitter to trigger your
timer for controlled periods of time.
• To maximize functionality, combine the time settings of
the photocell transmitter with those of the
programmable timer to achieve your desired ON/OFF
applications.
INSTRUCTION TO THE USER
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions , may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RESET
ON/OFF
SET
CD
RANDOM
PROGRAM
TECHNICAL SPECIFICATIONS
Programmable Timer RCT100
Ratings: 120V AC, 15A
Max Load: 1800W resistive; 600W tungsten
Photocell Transmitter RT601
Transmission Range: up to 40m in open area
Transmission Frequency: 433.92 MHz
In order to maintain compliance with FCC regulations, shielded cables must
be used with this equipment. Operation with non-approved equipment or
unshielded cables is likely to result in interference to radio and TV reception.
The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the user’s
authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 1
Create Date                     : 2003:06:20 21:11:55
Modify Date                     : 2003:06:20 21:11:55
Producer                        : Corel PDF Engine Version 10.427
Author                          : SC
Creator                         : CorelDRAW Version 10.0
Title                           : RT100RT601 Manual

EXIF Metadata provided by EXIF.tools