Mandolyn Electronic Technology WS Weather Station Receiver User Manual WS2300U English

Download:
Mirror Download [FCC.gov]
Document ID	839416
Application ID	Cxw+gHB2grPfa1VdpptyIQ==
Document Description	User Manual WS2300U
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	150.37kB (1879609 bits)
Date Submitted	2007-09-06 00:00:00
Date Available	2007-09-06 00:00:00
Creation Date	2007-08-17 19:09:31
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-08-17 19:09:31
Document Title	WS2300U user manual(English) ...
Document Creator	PScript5.dll Version 5.2.2
Document Author:	compaq user

P.01
LED indicator
Temperature reading
ChannelNumber
WT440 transmitter
Inside
temperature
and trend
indicator
WS2300U receiver
DST
Clock;
Clock alarm;
Month, day
RCC(WWVB).
Outside channel,
temperature and
trend indicator
Within these 3 minutes, receiver will beep and picks up the temperature
signals from transmitter(s) and displays the readings.
DAY
MONTH
DST
Beep sound indicates that learn function
has started
It will beep as each remote sensor is detected
Temperature readings of remote sensor
display on the receiver.
DAY
MONTH
DST
P.04
* Learn function executes automatically and runs for approximately 3 minutes
* If that fail, make sure the transmission within range or try diferent location.
Press and hold Channel o
f r 3 sec onds in
clock display mode
Manual-Learn Function (Searching for Remote Signals):
If a new transmitter is added or if signal is lost (outdoor display blinking), learn func tion must be
executed again.
* If the signals are not received within this 3 minutes, the outside temperature will show
". During this time, bringing the unit close together or try diferent location and restart the
auto learning function by removing and replacing the batteries for receiver.
Automatic Learn Function:
1 Learn function executes automatically and runs for approximately
3 minutes when batteries ar e frst installed in the receiver.
SYNCHRONIZE OUTDOOR TEMPERATURE
Drip-proof design with LCD
user-selectable C or F
Channelnumber display
Transmission range:
up to 40 meters in open area
Battery type: 2 x AA
Remote Transmitter WT440
Radio controlled clock (WWVB)
Clock with date display
Clock alarm
Inside temperature display
Receives and monitors outside temperature
from up to 4 remote sensors via
RF technology of 433MHz
Maximum/minimum temperature records
Temperature trend indicator
Temperature alarm
User-selectable C or F
Backlight illumination
Battery type: 2 x AA
Main Display Unit WS2300U:
FEATURES
OWNERS M ANUAL
Congratulations on your purchase of this weather station set, WS 2300U+ WT440. Please take the time to read and understand
this manual so you can begin to enjoy the convenience and features this product has to ofer.
Wireless Thermo-Station
with transmitter
WS2300U+ WT440
SET
MONTH
DST
P.02
10 Wall Mount Holder & Table Stand
9 LCD display
8 Battery compartment
P.06
Date Setting:
Press Mode at clock setting mode, Month and Day will fash
Press Hour/+/Min/Max to setday
Press Minute/- to set month
7 #
3 6
Press Channel to select weekday
20
* February will have 29 days
8 Do not press any key for 1 minute to fnish date
setting, or press Mode
to exit the date setting mode.
DAY
Clock 1 Setting:
Press and hold Mode for 3 seconds to enter the clock setting mode, Time will fash.
Press Hour/+/Min/Max to set Hour
Press Minute/- to set the Minute
Press Channel to clear second
Press Snooze during clock setting, to change between 12 and 24
hour display.
4 Do not press any key for 1 minute to fnish clock setting, or
press Mode to enter Date setting
MANUAL CLOCK & DATE SETTING
P.05
MONTH
DST
7 C/F: change between C or F , change
channeland house code
setting mode
6 SET: enter to House code and Channel
format; activate diferent mode in temperature
alarm; enable/ disable backlight func
tion
5 Snooze: snooze for alarm; toggle 12 or 24 hour
channels (1 to 4); turn on/of the clock alarm;
toggle between C and F ; adjust weekday
4 Channel: scrolls through remote
mode; adjust clock, date and temperature
alarm; activate manual synchronization of
radio-controll clock
RADIO CONTROLLED CLOCK
C /F
DAY
3 Minute/-: Toggle between clock and date
temperature; adjust clock, date and temperature
alarm; clear temperature alarm
2 Hour/+/Min/Max: show minimum or maximum
and temperature alarm mode
1 Mode: scrolls through clock, alarm,
KNOW YOUR PRODUCT
SET
C /F
to set hour
2 will flash
1 or
2 will appear
P.07
Press ANYother key will shut off the alarm. Without interruption,
alarm will shut off automatically after one minute.
Press Snooze to snooze the alarm for 5 minutes. After that the
alarm will sound again.
1 or
When Alarm Sounds
Press Channel to toggle alarm on and off
When the alarm is set ON, the bell symbol
Press Minute/- to set minute
Press Hour/+/Min/Max
Scroll to Alarm 1/ Alarm 2 mode using Mode
Alarm 1& Alarm 2 Setting
CLOCK ALARM SETTING
P.03
Step 2: setting the receiver
8 Remove battery cover and insert 2 AA size batteries. Insert
between terminals observing proper polarity then replace cover
* Use a diferent house code if your weather station detect other signals
from neighboring sources
* Factory default: house code = 01 and channel = 01
DS T
Step 1: Setting remote transmitters
3 57
1 Remove battery cover and insert 2 AA size batteries to start setup.
Insert between terminals observing proper polarity then replace cover
2 HOUSE CODE will fash for 8 seconds
3 Select HOUSE CODE (1 to 15) to by pressing C/F .
Make sure all transmitters in your system are set to the same House Code.
4 Press SET to complete HOUSE CODE setting. Channel will fash for 8 seconds
5 Select CHANNEL(1-4) by pressing C/F. This number will be confrmed upon
pressing theSETbutton, or if no key is pr
essed for 10 seconds.
6 Temperature will display
7 Toggle between C and F of Temperature by pressing C/F
Once setup of remote transmitter is completed, it will start transmission in one minute interval.
GETTING START
* Although remote transmitter are weather proof, it is recommended to place it away from direct
sunlight, rain or snow. This will help to make measurement more accurate.
# The building materials and where the receiver and remote transmitter are positioned vastly afect
the efective range. Try various set-ups for best result.
For the best operation,
1. Insert batteries for remote transmitter(s) frst, and then the receiver.
2. Place the receiver and remote transmitter(s) close together. This will ensure that the receiver can
synchronize with remote transmitter(s).
3. Place the remote transmitter(s) within efective transmission range.
READ THIS BEFORE YOU BEGIN
GB
AA 1. 5V
+ AA 1. 5V
AA 1. 5V
AA 1. 5V
The statement required by ICES - 003 is as follows:
NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
NOTICE:
Changes or modifications made to this equipment not expressly approved by
UPM may void the FCC authorization to operate this equipment.
Weather Station Receiver WS2300U

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:08:17 19:09:31+08:00
Create Date                     : 2007:08:17 19:09:31+08:00
Format                          : application/pdf
Title                           : WS2300U user manual(English) ...
Creator                         : compaq user
Document ID                     : uuid:715efb71-9019-4209-861f-a9983caab9fc
Instance ID                     : uuid:81af61e4-8d4c-4c97-b032-dc0017ca6493
Page Count                      : 2
Author                          : compaq user

EXIF Metadata provided by EXIF.tools