| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2916486 |
| Application ID | ca1+9cWtci+YagnlwTaHLw== |
| Document Description | Users Manual 3 English |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 206.18kB (2577272 bits) |
| Date Submitted | 2016-03-01 00:00:00 |
| Date Available | 2016-03-01 00:00:00 |
| Creation Date | 2016-02-03 15:34:51 |
| Producing Software | GPL Ghostscript 9.05 |
| Document Lastmod | 2016-02-03 15:34:51 |
| Document Title | Document1 |
| Document Creator | PDFCreator Version 1.4.1 |
| Document Author: | kenleung |
Instruction Manual
Marathon Bluetooth
Glass Panel Wall Clock
with Temperature and
Humidity Sensor
CL800004WH/CL800004GH/CL800004MG
/ "\
M—ARATHON ‘
IE 33
\® THU a2; 2; IE' E’E
\—
aliluemm l
c‘ 33%;;
MARATHON
Marathon Watch Company Ltd.
TF2 1.800.82224329 - T: 905.764.9420 - F: 90527640035
www.MarathonWalch,com
28
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device. pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates. uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment of‘l and on. the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radiolTV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1 ) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Statement
This deVice complies wrth Part 15 oftne FCC rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This oevrce must
accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equlpment.
NOTE. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are assigned to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not Installed and
used in accordance with the instructions, may cause harmful
interference to radio communications,
However, there is no guarantee that interference Will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or televrsion reception. which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the followrng measures:
‘ Reorient or relocate the receivmg antenna.
- Increase the separation between the equipment and
the receiver.
‘ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician
for help.
Japan Radio Law Statement
This product containsthe certified module byJapan Radio Law.
The certification number is E 0187140077
6 E
AC
28
location 0' Control
1. Snooze button 5_ Reset
2. Alarm on/off a Battery Compartment
3. Pair 7. Batterydoor
4. Scroll 8. Stand
/f\
MARATHON
WIE'IHEIQ
a THLI +'-'1:"“ lE‘ZE'E/
”Unholy
\ J
WWW
Thank you for purchasing the Marathon Bluetooth Wall Clock. This
product is designed to work With lPad, iPhone, iPod. other iOS
devices and Android 4.3 or above deVices.
- Supports iOS version 7.1 or above
- Supports Android versmn 4.3 or above
r Up to 5 alarms with snooze function
- Take full control of the Bluetooth Wall Clock wrth app
- Selectable alarm tone pattern and volume
- Temperature and Humidity reading With history chart
that can be read on App without alarm clock connection
- Count down timer
‘ Monitor the battery status ofthe Bluetooth Wall Clock and have
battery warning if it is at low level
' Can stop alarm vra App
- Wall mounting or desk stand
' Operatingtemperature is O“C to 40°C (23" F ~ 104°Fl
Before you start using it:
~ Please make sure to read the instruction manual carefully.
- Followmgand respecting the instructions in your manual Will
prevent damage to your instrument and avoid causing your
warranty to become vord.
- We shall not be liable for any damage occurring as a result of not
following these instructions. Likewrse. we take no responsibility
for any incorrect readings and for any consequences which may
result from them
' Please take particular note of the safety advice!
' Please KEED ti'lIS lnSTrUCtan manual forfuture reference
Disposal of Your Old Product
Your product is designed and manufactured with
high quality materials and components, which
can be recycled and reused When this crossed
out wheeled bin symbol is attached to a product
it means the product is covered by the European
Directive 2002/96/EC. Please inform yourself about
the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do
not dispose of your old products with your normal
household waste. The correct disposal of your old
DTOUUCI will help prevent potential negative
consequences for the environment and human health.
Disposal of Flat Batteries / Accumulators
You, as the end user, are legally obliged (Battery
Ordinance) to return all flat batteries and
rechargeable batteries.
Disposal in the household waste is prohibited.
“European Directive 2006/66/EC" Batteries, including
rechargeable batteries, which contain hazardous
substances are marked by symbols which indicate the
prohibition of disposal in the household waste. The
designations for the heavy metals concerned are as
follows:
Cd = cadmium, Hg = mercury, Pd = lead. You can
return flat batteries / rechargeable batteries free of
charge to the Collection points in your Community or
anywhere where batteries / rechargeable batteries are
sold. You thus fulfill your statutory obligations and help
protect the environment.
Caution
Replace only with the same or equivalent type of
battery. please refer to the engraved battery marks
inside the battery compartment for the correct battery
polarity (+) and (-). Danger of explosion is possible if
battery is incorrectly replaced.
This product complies with the requirement of the
1999/5/EC directive
Use this unit and mobile phone only in eni/ironments
with ambient temperatures between 0°C and 40’0.
And the maximum operating temperature of the unit
is 40 °c
27
- The unit should not be exposed to dripping or splashing of liquid,
- Do not expose unitand/or batteries to liquid, sand or
excessive heat.
- No objects filled with liquids, such as vases, shall be placed on
the unit.
~ Do not cover the unit, Allow adequate space with a small gap
between the buzzer holes and surrounding surfaces.
' To clean the set, use a soft dry cloth. Do not use any cleaning
agents containing alcohol, ammonia, benzene or abrasives as
these may harm the housing.
Manufacturer reserves the right to update the contents of this
manual and App,
26
GeH n9 Sta led
1. Install battery
11 Open the battery compartment.
1.2 Insert 2 x AA batteries in polarity H} and H as indicated.
1.3 Close the battery compartment.
2. Install CIDCK System ADD on YOUY deVlCe.
2.1 Access App Store or Google play search for Clock System
2.2 Select and install Clock System App on your mobile device.
Please Note:
User manual is based on iOS versmn and may differ with Android
version which will be specified as supplementary information at
bottom of relative page.
g e Bluelool Wall Clock Scroll Function
3. Pair the Bluetooth Wall Ciock with Ciock System App. ‘ ‘Temperatule and humidity with clock mode'
3.1 Before runnmgthe Ciock System App, make sure your device ‘
has Bluetootn enabied. L
‘
3.2 After you tap the app iCOi’l , the ‘Nearby Devices’ screen i
appears. You need to pair the Biuetooth Wall Clock dewce ‘ 3i:
before you enter the main app screen. ‘
._ ..... . n .. .- ‘
suMomemFRsA
m-mmex-l a i \® r/IU’V r®aqu§fiA®HD MB RB
r. n. 9......
my» ( ‘ “clock with alarm time mode"
i (show if any alarm enabled)
WWW! i /
‘ '__l:
@ i
MARATHON ‘
iOS Version ‘ wraomwimffian 5LID ' UH
— i TIMER mode
HMWML‘ ‘ (only if the timer is running)
‘ ®[:_
® i suwwwsmms/x
MARATHON ‘ . c®n® @114 ((2)) «(91 1
Andrmd Version i 14.2 In autorscroliing mode, each mode Will stay 3 seconds
‘ and then swttch to next display.
4 25
Scroll Function Pairing the Blueioolh Wall Clock
14. You can press the [Scroll] button on the Bluetooth Wall Clock
to switch between different information manually. Oryou can
press and hold the [Scroll] button to enable/disable auto~ ‘
scrolling display function.
14.1 The scrolling display WlII be In followmg order: l
won
"Clock with calendar mode"
' ' ‘ g
9 l 3.3 Tap ” Pair New Device” to search for nearby devices.
T WWW "_ . .
® I immw (mg; 3.4 Press and hold the [PAIR button on the Bluetooth Wall Clock
\ /
device for 5 seconds. You will see that the 9 icon will start
to blink on the clock.
“PM
"Calendar mode"
\® MUN (ram IE'IHH,
- meme,
mm Dnvim
Vw LE w: chm
iOS Version Android Version
3.5 The new Bluetooth Wall Clock will be displayed on the App
and is ready for pairing. Tapthe “Bluetooth Wall Clock” to start
l the pairing and connection process. Once the Bluetooth Wall
Clock is paired, it will start time and data synchronization
24
Pairing the Blueloolh Wall Clock Offline Temperature and Humidity Reading
13 3 When the Marathon Clock and App are offline, user can
i still read the latest history record from the iast connection
‘ by tapping the chart icon on the right hand side of specific
unit list in Nearby Devices screen.
nivmmme i e w w l -
Nearby Device fl
- .. mudmmw Md”
m mw Device
®
MARATHON - I» m
iOS Version
‘ e
i M A R ATHO N
iDS Version
@Nambybfiicu :+) ‘
Alaw‘sNarm
M... 4;“ saw.
Android Version
3.6 After the connection is made, the following information ‘
Wili be synchronized: i
i) Current time and date ®
ii) Aiarms&timer setting MARATHON
iii) Unit battery ievel ‘ . ,
iv) Temperature and Humidity history i Android Versmn
Tempe ture and Rela e Hum
ng the Bluelool Wall Clock
13 2 The unit can accumulate temperature / humidity readings
up to 7 days. To read the data tap the conditions then go
into the historical chart showing temperature / relative
humidity reading by time and date, including the maximum
and minimum record of each day. Number of historical
records stored In app depends on your devrce memory.
Note:
(Resetting the unit will clear all memory stored in the unit
and the record in app after synchronization.)
..... . ,_. ,_,
(mm MBIVSAIW m (Done Mm‘sNerm m
W,
95" 23.7” 2],? Kb?“ ‘;5 0“ 263°
59m. 53% 430?: gay 53%
C7 137 l3?“ ‘0 ‘3
iOS Version
w. game";
4 . 4 .
as. 247' 355 242 gnr’ m
m m a,“ m, m m
Android Version 22
®
MAnArHon
’pm— \
' No Bluetooth
0 connection
\@ THUW 13:35
0mm
/ ® \
mumm-
Bluetooth establishing
connection
\, ,/
E \
mum”
/7vm—\
. Bluetooth connected
' I) successfully
\e THU it (3135}
nanny /
3.7 When the Bluetccth Wall Clock :5 paired with one device, clock
must be reset to pair WIth other deVIces.
3.8 One dthCS can pair with a maximum of 5 Bluetooth Wall
Clocks at once.
Rename the Blueloo Wall Clock Temperature and Relat ve Hum y
4. Rename the device
Tap the device name (default is “Biuetooth Wall Clock") atthe
top ofthe screen to edit the device name.
/ [c ’i
’ 1:03Ah
x"
2 UJ AM
C 00 AM
‘9 03 AM
00000
:- ....” am 1--
! (um Mmmm g
owenrvurop
ASDFGHJKL
szVBNM
m a G 5mm mu-
iOS Version
n .... .i i
Q 0:
mum j
9 00 AM u
1734567590
nwFPrvninv
ASDFGHJKL
rzxcvsrma
Android Version
13 Current Temperature and Relative Humidity (Conditions)
isme 2m L...)
(Done WWW a _- a
W, “mm” 3
c 01* AN
‘ 9.03 AH
{. ob ’V'
€03 AN
m n no on
r. _ {5‘ two ‘57“?
iOS v33“ Android Version
13 1 The unit can measure temperature and relative humidity.
The current temperature and humidity reading will be shown
on the App or you can browse it on the Bluetooth Wali Clock
LCD screen by pressing the “Scroil” button.
21
Reset the Bluetooth Wall Clock
Battery Status Indicator
12. Reset the Bluetooth Wall Clock
If the Bluetooth Wall Clock is not worklng properly, try to press
RESET button to resume default setting. The LED flashes twice
in (purple) colour, then the LED will flash once perG seconds
in red colour.
Drew-w um um»
um Wuha‘ Mvmslv mm:
m m m um“ r. mm
mm m; Dal/(auras wall
ammuuluyunkuunum
n W mum
me Restore
cm x
iOS Version Android Version
After reset, all data in the Bluetooth Wall Clock is deleted.
Press and hold the [PAIR] button agaln to re-palrthe Bluetooth
Wall Clock. If it has been paired previously with the same device.
you can select “Restore" to resume all setting and data or select
“Erase" to start all from scratch.
20
Battery status indicator:
Indicates the battery level of your Bluetooth Wall Clock
device. When the battery level drops below 20%, the battery
icon is in red status and a low battery warning will pop up as a
reminderto replace the battery,
Meanwhile, low battery indicator icon will be shown on the
alarm clock LCD.
Above 60% E
Between
20% ~ 60%
[Ell
Below 20%
|E|I
Above 60%
Between
20% - 60%
|E|I
Below 20%
El
..... Wu .-
< um. “warm n
am.
5‘ UO am a
B 00 am t,
or
an" w-mlng
O "amaze-M
60L) am
rm 3
£3.00 am _,
E 9 la fit
iOSVersion
Android Version
Setting the Alarm me Preterence
6. Settingthe alarm time i 11.1 Snooze Enabled. Tap to select ON/OFFto enable/disable the
i Snooze function. If Snooze Enabled is ON, you will have two
6.1 Each Bluetooth Wall Clock can set up to a maximum of ‘ more options, which are:
5 Alarms. 0n the main screen, tap individual alarm
(e.g. Alarm 1) to enter the alarm setting page. Maximum Snoozes:
..... . ._ l The maximum number of times to repeat the snooze
w mm ‘ function, which can be set to Unlimited or values from 1 to 9.
Snooze Duration:
The time duration of snooze function. which can be set
to values from 1 to 15 minutes.
a on :im 3 as m
11.2 Alarm Sound Duration.
The alarm duration, which can be set to values from
m 1 to 15 minutes.
11.3 Auto DST update:
l It Will adjust Daylight Saving Time (DST) automatically based
‘ on yourdevice time zone setting. The alarm clock will be
automatically one hour ahead of Standard Time in summer
time and will be back to the normal Standard Time when
/ \ l back to winter time, according to your device's time zone.
M—ARAI'HDN
11.4 Scroll Display:
‘ Turn on to enable the LCD screen to switch automatically
(screen detail please refer to point 14)
THU (E 35 ‘
05mm l
\ ' /
6.2 The alarm setting screen appears. You can edit and adjust ‘ 11.6 Time Format. Select 12 or 24 hour format
different items on this screen. which include:
i) Alarm Name: Tap alarm 17 5 to edit your preferred nameto ‘
this alarm.
ii) Time: Tap to adjust the time for this alarm.
iii) Day of Week: Tap to select which day of week to enable l
the alarm.
. if none are selected. the alarm will only sound once.
, if all days are selected, it will sound daily.
iv) Sound pattern: Tap to select which torie pattern (5 patterns i
plus one random pattern available) is applied to this alarm. l
10
iOS Version Al'ldl‘Old Version
11.5 Temperature: Select 'C or ‘F
11.7 Date Format: Select MM / DD or DD/ MM day format.
19
Preference
Setting the Alarm Time
11. Preference setting
Tap the Q / j to enter the Preference screen. Vou can edit
and adjust the following items on this screen.
Dame \’e'si>n
i fi
'1? a
(“we Nanamw m (We mum
Mammal.
snoozIEmbbd (
”do”
“mum
Autwbsl’uvfluo 5“”me
smu my.” awn”. J
"WM :- “'""'°'""“ T-
Warm. - 9».qu W
mm“
mm Enabler
mum dic-
Scmll thxy
lemnemur-
m Fumlm
mow um»
smi mm
WWW
mm mm
m Mmm
— , My mum.
“I
m mm
‘4 m, m
Andrmd Version
18
v) Alarm volume level: Tap to select the alarm sound volume level
(three options: Low, Med and High).
63 Complete the alarm setting.
i) Tap [Done] / to save the alarm setting and turn on
the alarm.
ii) At the main sateen, user can turn the alarm on / off by
scrolling the (i right and left.
Mari , Mann
t- ..... . _
fl Mama-MM 0
(fi‘ 3; Virginia?
MAREHON
iOSVersion
flex/"W , ll
W —
9 (11] NM II
it L‘U AM
9 DU AM
A; on AM
900 AM
0000f!
Android Version 11
Remote Alarm OFF
Deleting the Bluetooth Wall Clock Record
6.4 Stop the alarm via App. (iOS version only)
i) When the alarm sounds, enter the App and tap the blinking
icon / located under Paired Devices
ii) Tap the / icon to stop the alarm.
Mum lem G
vary 5 Alfrrn &
at. Navy Device
69
MARATHON
iOS Version
6.5 Stop the alarm during lockscreen. (iOS version only)
i) An alarm notification will pop up on the lockscreen. Swipe
right on the notification and tap “Alarm Cancel" to stop alarm
or “Snooze" to enter snooze mode
ii) For Android version, the notification icon appears at the top
of status bar Slide down the status bar to show the
notification and tap “Alarm Cancel" to stop alarm or “Snooze"
to enter snooze mode.
12
10. Delete the Bluetooth Wall Clock record.
iOS Version
am ._ .... u x—
mmmw mm (m. “Winn.” mm
® ® ®
MARATHON MARATHON MARATHON
You can tap the a at Nearby Devices screen to enter the Known
Devices page. By tapping “Edit" and then the e , you can select
“Delete" to delete the Bluetooth Wall Clock record on the
current deVice.
Android Version
gmmm.
Mary‘s Aim Mun/5 Alarm
Wm
® ®
MARATHON MARATHON
You can tap the _ at Nearby Devices screen to enter the Known
Devices page By tapping “Edit" and then the x , you can select
“Delete" to delete the Bluetootn Wall Clock record on the
current device.
17
Setting the Timer
9.2 Using the Timer
In the Home screen, you can tap “Start" under Timerto
start counting.
W .- ..... . m
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Page Count : 16
XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6
About : uuid:1efeda50-cca4-11e5-0000-8ede5424e51d
Producer : GPL Ghostscript 9.05
Keywords : ()
Modify Date : 2016:02:03 15:34:51+08:00
Create Date : 2016:02:03 15:34:51+08:00
Creator Tool : PDFCreator Version 1.4.1
Document ID : uuid:1efeda50-cca4-11e5-0000-8ede5424e51d
Format : application/pdf
Title : Document1
Creator : kenleung
Description : ()
Author : kenleung
Subject :
EXIF Metadata provided by EXIF.tools