Marelli ASTU13 Automotove Keyless Entry System Transmitter User Manual MEASUREMENT TECHNICAL REPORT

Calsonic Kansei Corporation Automotove Keyless Entry System Transmitter MEASUREMENT TECHNICAL REPORT

Contents

Test Report more

   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232   EMISSION TEST REPORT              Test Report No. :  21BE0029YW-1                  Applicant:    CALSONIC KANSEI CORP.         Type of Equipment:    Keyless Entry System (Transmitter)              Model No.:   ASTU13          Test standard:      FCC Part 15 Subpart C           Test Result:   Complies           This report may not be reproduced in full, partial reproduction may only be made with the         written consent of the laboratory.       The results in this report apply only to the sample tested.        Date of test:          September 14, 2000                         Tested by:                  Naoki Sakamoto                Approved by:                  Issued date:      October 5, 2000                            Kazutoyo Nakanishi                Section Manager of EMC section
            Test report             Our reference  :  21BE0029YW-1             Page  :  2of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232   Table of Contents             Page  1 GENERAL INFORMATION           3  1.1 Product Description           4  1.2 Tested System Details           4  1.3 Tested Methodology           4  1.4 Test Facility             4  2 SYSTEM TEST CONFIGURATION         5 2.1 Operation Environment             5  2.2 Justification             5 2.3 EUT Exercise Software           5   2.4 Test Procedure            5  Figure 2.1 Configuration of Tested System        6  3 RADIATED MEASUREMENT PHOTOS         7  Figure 3.1 Radiated Measurement Photos        7  3.1 Measurement Uncertainty          8  4 RADIATED EMISSION DATA          9  4.1 Field Strength Calculation          9  5 TEST EQUIPMENT USED           11  APPENDIX              12  A:Test Data             A1 – A3
            Test report             Our reference  :  21BE0029YW-1             Page  :  3of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232  1 GENERAL INFORMATION      APPLICANT      : CALSONIC KANSEI CORP.   TRADE NAME      : CALSONIC KANSEI    ADDRESS      : 5-24-15 Minamidai, Nakano-ku, Tokyo            164-8602 Japan             Tel: +81-283-21-8136            Fax: +81-283-23-9191    REGULATION(S)     : FCC Part 15 Subpart C    MODEL NUMBER     : ASTU13   FCC ID       : KBRASTU13    SERIAL NUMBER     : -     KIND OF EQUIPMENT        : Keyless Entry System (Transmitter)               TESTED DATE     : September 14, 2000     RECEIPT DATE OF SAMPLE        : September 14, 2000    REPORT FILE NUMBER    : 21BE0029YW-1     TEST SITE            : A-PEX Yokowa NO.3 Open Test Site
            Test report             Our reference  :  21BE0029YW-1             Page  :  4of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232   1.1 Product Description   Model: ASTU13 (referred to as the EUT in this report) is a Keyless Entry System (Transmitter). .   The specification is as following : Operation Frequency   :  4 MHz Carrier Frequency       :  315 MHz Operation Voltage   :  DC 3.2V       1.2 Tested Equipment Details     Model     FCC ID  Description    Cable description  Backshell Material   (1) CALSONIC KANSEI     KBRASTU13      Keyless Entry System         - - -         P.V.C    M/N: ASTU13              (Transmitter)    (EUT)               1.3 Tested Methodology  Radiated testing were performed according to the procedures in FCC/ANSI C63.4 (1992).     1.4 Test Facility  The open area test site and conducted measurement facility used to collect the radiated data is located on   108 Yokowa-cho, Ise-shi, Mie-ken 516-1106 Japan. This site has been fully described in a report submitted to FCC office, and listed on September 12, 2000 (Registration number: 90412).
            Test report             Our reference  :  21BE0029YW-1             Page  :  5of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232  2 SYSTEM TEST CONFIGURATION  2.1 Operation Environment   Temperature :  23℃        Humidity :  60%        Power supply :  DC 3.2V        2.2 Justification  The system was configured in typical fashion (as a customer would normally use it) for testing.   2.3 EUT Exercise Software  The EUT exercise program used during radiated testing was designed to exercise the various system components in a manner similar to typical use.  The sequence is used:  Operation Mode    :  Transmitting   2.4 Test Procedure  Tabletop Equipment Radiated Emissions  EUT was placed on a platform of nominal size, 1m by 1.5m, raised 80cm above the conducting ground plane. Test was made with the antenna positioned in both the horizontal and vertical planes of polarization. The measurement antenna was varied in height above the conducting ground plane to obtain the maximum signal strength. The measurement distance was 3m.
            Test report             Our reference  :  21BE0029YW-1             Page  :  6of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232  Figure2.1 Configuration of Tested System  Front View (1):EUT   * Test data was taken under worse case conditions.    Top View (1):EUT     * Test data was taken under worse case conditions.
            Test report             Our reference  :  21BE0029YW-1             Page  :  7of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232  3 RADIATED MEASUREMENT PHOTOS Figure 3.1 Radiated Measurement Photos
            Test report             Our reference  :  21BE0029YW-1             Page  :  8of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232   3.1 Measurement Uncertainty   Radiated Emission Test  The measurement uncertainty (with a 95% confidence level) for this test was  ±3.3dB.  ■ The data listed in this test report may exceed the test limit because it does not have enough margin (more than 3.3dB).  □ The data listed in this test report has enough margin, more than 3.3dB.
            Test report             Our reference  :  21BE0029YW-1             Page  :  9of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232  4 RADIATED EMISSION DATA   The initial step in collecting radiated data was a spectrum analyzer peak scan of the measurement range (30MHz-3300MHz). The final data was reported in the worst-case emissions. The minimum margin to the limit is as follows :       Receiver  Correction  Field  Frequency  Reading  Factor   Strength  Limit   Margin  (MHz)   (dBμV)   (dBμV)   (dBμV/m)   (dBμV/m)   (dBμV)                        315.00   78.2     -3.8     74.4    75.6    1.2     * quasi-peak mode   The Fundamental Frequency of this equipment is 315MHz. The peak of output level of fundamental frequency was confirmed at the 315MHz by perfarming the meaurement. It was corroborated that equipment was within of the tolerance which is prescribed in the FCC requlation Part 15 Subpart C sec. 15.231 (c). Since the fundamental frequency is 315MHz, the upper limit could be 315.8 MHz and lower limit could be 314.2MHz. The measurement result was 315.2MHz when the limit was 315.8MHz and also another measurement result was 314.8 MHz when the limit was 314.2MHz.
            Test report             Our reference  :  21BE0029YW-1             Page  :  10of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232   5.1 Field Strength Calculation  The field strength is calculated by adding the Antenna Factor, Cable Factor and Antenna Pad, and subtracting the Amplifier Gain from the measured reading. The sample calculation is as follows :   FS = RA + AF + CF + AT - AG  where    FS = Field Strength   RA = Receiver Amplitude     AF = Antenna Factor   CF = Cable Factor   AT = Antenna Pad   AG = Amplifier Gain    Assume a receiver reading of 78.2 dBμV is obtained. The antenna Factor of 14.0 dB, Cable Factor of 4.5 dB and Antenna Pad of 6.0 dB is added. The Amplifier Gain of 28.3 dB is subtracted, giving a field strength of 74.4 dBμV/m.  FS = 78.2 + 14.0 + 4.5 + 6.0 – 28.3 = 74.4    dBμV/m
            Test report             Our reference  :  21BE0029YW-1             Page  :  11of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232 6 TEST EQUIPMENT USED  INSTRUMENTS   Mfr.    MODEL  C/N  Calibrated Until                              ■ Pre Amplifier   Hewlett Packard  8447D   AF1  November 16, 2000 □ Pre Amplifier   Anritsu   MH648A  AF3  November 16, 2000 ■ Pre Amplifier   Hewlett Packard  8449B   AF4  November 16, 2000 □ Attenuator   Anritsu   MP721B  AT6  June 8, 2001 □ Biconical Antenna  Schwarzbeck   BBA9106  BA1  April 28, 2001 □ Biconical Antenna  Schwarzbeck   BBA9106  BA3  April 28, 2001 ■ Biconical Antenna  Schwarzbeck   BBA9106  BA5  April 28, 2001 ■ Horn Antenna  A.H. Systems   SAS200/571  HA1  February 4, 2001 ■ Logperiodic Antenna Schwarzbeck   UHAP9108-A LA6  April 29, 2001 □ Logperiodic Antenna Schwarzbeck   UKLP9140-A  LA8  April 29, 2001 □  Loop Antenna    Rohde & Schwarz    HFH2-Z2    LP1    November 3, 2000 □ LISN    Rohde & Schwarz  ESH2-Z5  LS1  November 15, 2000 □ LISN    Rohde & Schwarz  ESH3-Z5  LS2  November 15, 2000 □ LISN    Schwarzbeck   NSLK8127  LS3  November 15, 2000 □ LISN    Rohde & Schwarz  ESH3-Z5  LS4  November 15, 2000 □ LISN    Schwarzbeck   NNLK8121  LS5  November 15, 2000 □ LISN    Rolf Heine   NNB-4/200  LS6  November 15, 2000 □ LISN    Schwarzbeck   NNLK8126  LS7  November 15, 2000 □ LISN    Schwarzbeck   NSLK8127  LS10  April 8, 2001 □ Spectrum Analyzer  Hewlett Packard  8567A   SA3  December 13, 2000 ■ Spectrum Analyzer  Hewlett Packard  8567A   SA4  December 13, 2000 ■ Spectrum Analyzer  Advantest   R3271   SA5  September 27, 2000 □ Test Receiver   Rohde & Schwarz  ESHS-20  TR1  March 30, 2001 ■ Test Receiver   Rohde & Schwarz  ESVS-30  TR2  July 13, 2001 □ Test Receiver   Rohde & Schwarz  ESCS30  KTR1  August 7, 2001       ■ indicates EMI Test Equipment used.           *All measurement equipment is traceable to national standard.
            Test report             Our reference  :  21BE0029YW-1             Page  :  12of 12             Issued date :  October 5, 2000             FCC ID  :  KBRASTU13   Testing Laboratory  A-pex International Co., Ltd.     Telephone:  +81 596 39 1485   108 Yokowa-cho, Ise-shi  Mie-ken  516-1106  JAPAN  Facsimile:  +81 596 39 0232        APPENDIX      A : Test Data    Radiated emissions        A1 – A3

Navigation menu