Maxon CIC MX-C99 GSM/GPRS Handset User Manual mx c99en 0428

Maxon CIC Corp. GSM/GPRS Handset mx c99en 0428

Contents

Manual part 2

74 75MYPHONE MYPHONE BACKLIGHT TIME1.Press  to select “Backlight time”.2.Select one of the following backlight time and press  to save it.LCD POWER SAVE1.Press  to select “LCD Power Save”.2.Select one of the following LCD power save and press  to save it.LIGHT & LCDYour phone has a backlight LCD display with full graphic capability. You can set LCD power save, backlight time.1.Press  ,,. MY MENU KEY1.Press  ,, to select “My Menu key”.2.Select the menu you wish to use. You can adjust how long the Backlight stays on. (20/40/60 seconds)On set: Turn off the display while standby status.Off set: Turn on the display while standby status. Set frequently using menus to move immediately by pressing   on the standby status. mx-c99en(0428)  2004.4.29  6:34 PM  Page 74
76 77SETTINGS SETTINGSSET TIME / DATE1.Press  to select “Set time / Date”.2.You are to set the present time & date.SUMMER TIME1.Press  to select “Summer Time”.2.Mark up ‘Summer time’ through  to apply daylight saving time.TIME ZONE1.Press  to select “Time zone”.2.Use  and  to select a timezone and press  to save it.3.You are to select your current location.DATE FORMAT1.Press  to select “Date Format”.2.Select one of the date formats and press  to save it.TIME & DATE1.Press  ,,.Box If you wish to apply daylight saving timeAUTO KEY LOCK1.Press  ,, to select “Auto key lock”.When set Auto Key Lock, all the keys lock after 30 seconds. This function is for preventing unintended key pressings whilenot using the phone. To release the functions, press  .The Settings menu is used to set basic parameters for the phone such as language,time & date, data transfer, security, network and call settings.mx-c99en(0428)  2004.4.29  6:34 PM  Page 76
78 79SETTINGS SETTINGSDATA CABLE1.Press  to select “Data Cable”.2.Set each parameter and press   to save it.GPRS1.Press  to select “GPRS”.2.Set each parameter and press   to save it.LANGUAGEThe display will change to the selected language.1.Press  ,,.2.Use  to select a language.3.Select one of the available languages and press  to save it.4.The display will change to the selected language.DATAYou are set parameters for data transmission from your laptop or PC.1.Press  ,,.- Bit rate : (300 / 1200~ / 115200)- Reset : You are to reset it.1. Attach on2. Accept calls : You are to mark this up to enable it.mx-c99en(0428)  2004.4.29  6:34 PM  Page 78
80 81SETTINGS SETTINGSPIN CODE 11.Press  to select “PIN code 1”.2.Mark it up to enable PIN code 1 and press  to save it.CHANGE PIN11.Press  to select “Change PIN 1”.2.Enter your old pin code followed by the new code.3.Confirm it when prompted. Press  .SECURITY1.Press  ,,.That if you enter an incorrect PIN code three times in succession, your SIM card will lock and youmust enter the PUK code to unlock. PIN and PUK codes are either supplied with your phone or mustbe obtained from your network provider or place of purchase.mx-c99en(0428)  2004.4.29  6:34 PM  Page 80
82 83SETTINGS SETTINGSCHANGE PIN21.Press  to select “Change PIN 2”.2.Enter your old pin code followed by the new code.3.Confirm it when prompted. Press  .SIM LOCK1.Press  to select “Sim lock”.2.Mark it up to lock SIM card.SELECT NETWORK1.Press  to select “Select network”.2.Select Automatic or Manual.NETWORK1.Press  ,,.As a unique identification, your phone is furnished with a code number known asIMEI. You must retain this number in case you need to block your account, e.i. if yourphone is lost or stolen. We recommend that you write it down here: The IMEI number is printed on the label under the battery.mx-c99en(0428)  2004.4.29  6:34 PM  Page 82
84 85SETTINGS SETTINGSPREFERRED NET1.Press  to select “Preferred net”.ADD NETWORK1.Press  to select “Add network”.CALL FORWARD1.Press  to select “Call forward”.The phone will search this list from the top. Left softkey options roll-up enables youto Add or Insert a new network. If you use Add, the new network will be added tothe end of the list (having the lowest priority). Insert will insert the network in thelist where the cursor is placed.To add a new network, start by selecting an empty network entry from the Add net-work menu. Press OK. A text editor will appear. Enter the name(input english) ofthe network followed by the Mobile Country Code (MCC) and the Mobile NetworkCode (MNC). This information is supplied by your network operator. CALL SETTINGS1.Press  ,,.ቢ.Unconditional: To  forward all incoming calls to a specified number.ባ.All unanswered: To  forward all calls that you do not answer within a specified period of time.ቤ.No reply:To  forward calls those are not replied.ብ.Not reachable: To  forward calls when you are out of network range.ቦ.Busy: To  forward calls when your phone is busy.ቧ.Status all:To  summarize the status of call forward options.ቨ.Cancel all: To  cancel all call forward settingsAspecific number can be designated for each option, and you can activate, view or cancel the present status. Follow the on screen instructions.mx-c99en(0428)  2004.4.29  6:34 PM  Page 84
86 87SETTINGS SETTINGSCALL WAITING1.Press  to select “Call waiting”.OPTIONAL FUNCTION1.Press  to select “Optional func.”.Redial1.Press  ,,,,to select “Redial”.Shortcut dial1.Press  ,,,,to select “Shortcut dial”.Slide open1.Press  ,,,,to select “Slide Open”.This function notifies you of another call during a telephone conversation. Enter the menu toActivate or Cancel Call waiting or to see the Status. If Call waiting is active, and you are calledduring a conversation, you will hear a faint ringing tone in the background. To answer the newcaller without losing contact with the original party:-Enter Options roll-up menu.  Select Switch calls.-conduct the conversation with the new party and select Switch calls to return to the first caller.Select Join calls to conduct a three-party conversation. This menu contains various settings to facilitate daily use.Activates automatically redialing of your last unsuccessful call. The number will beredialed after 5 seconds (1 time), after 1 minute (3 times) and after 3 minutes (10times). If this sequence is completed without connection established, the numbermust be manually dialed for a new attempt.To  manually abort the redial sequence, press [       ]. To  manually redial last number called, press [       ] twice in a row.If you activate Shortcut dial, you can dial phone numbers from the Shortcut list bypressing just one or two digits.Set the phone to answer a call with slide up.mx-c99en(0428)  2004.4.29  6:34 PM  Page 86
88 89SETTINGS SETTINGSCALL BARRING1.Press  to select “Call barring”.BILLING1.Press  to select “Billing”.You can keep track of your calling expenses by setting the “Billing” feature. Scroll to Billing. Press [ ]. Enter the submenus:You can lock the telephone to reject incoming calls or bar outgoing calls, domestic or international. Call barring is a password protected network service, and details should be acquired from your network.ቢ.Cancel all - To cancel all call barring settings.ባ.Outgoing calls - To cancel all call barring features of outgoing calls, or decide what  type of outgoing calls is to be barred.(1.Cancel all / 2.All calls /  3.All internat. / 4.Except to home)ቤ.Incoming calls - To cancel all call barring features of incoming calls or  decide what type of incoming calls is to be barred.(1.Cancel all / 2.All incoming /  3.When abroad)ብ.Password - To set a password.ቢ.Total calls - To view the total amount of  time and units used.ባ.Last call - To view the duration of the last call.ቤ.Set max units - To set a maximum of units available for a call.ብ.Units left - To view the number of units left on your account.ቦ.Price/unit - To enter a network price for the units.ቧ.Currency - Displayed if supported by your network.mx-c99en(0428)  2004.4.29  6:34 PM  Page 88
90 91SETTINGS CAMERARESET SETTINGS1.Press  ,,.PHOTO    To move directly to camera menu, press or in idle mode.1.Press  ,,to select “Photo”.2.Press  or  to take a photo.3.Press the  to select Save or Send Photo.4.Enter name and press  to save it.Return all settings to factory defaults.The power goes off automatically.if you want to delete photo image can use to camera menu.Select Send Photo, and you reach MMS Menu.For details of MMS, see Page 38.- Press it once on the idle mode, you can move to Camera Menu.- Press on Photo at Camera menu and Motion Shot menu to take a picuture.- Easy to take self picutures or motion shot. mx-c99en(0428)  2004.4.29  6:34 PM  Page 90
92 93CAMERA CAMERAWhen connecting charger while taking phone.(Photo shot, Motion shot)1.The screen on LCD of MX-C99 will stop displaying in camera mode when connecting a charger.2.After that , " Continuous " is displayed on it.When this phenomenon is happened, push the button to operate camera mode continuously.During normal use with charger connected to MX-C99, charger may be subjected tovoltage interruption causing the same phenomenon as above.  If it happens, just follow the above procedure.Zoom(0,+1,+2,+3)4 Graphic qualities,Normal, Better, Good& Best.5 Types of sticker.7 Levels of contrast, -3 to +3.Shutter speed, 0 or 10sec.Normal orReverse picture. VGA(VideoGraphicArray), QCIFmx-c99en(0428)  2004.4.29  6:34 PM  Page 92
94 95CAMERA CAMERASHOT1.Press  to select “Shot”.2.Press  , or to take a motion.3.Press  to enter name and press  to save it.VIEW1.Press  to select “View”.2.Select one from the view list and press  to play.MOTION 1.Press  ,,to select “Motion”.Motion frame : 100frame (Time : about 15sec)Press [         ] to display the following items.Information : To display a time and  date in motion. Rename : To rename a motion.Delete all : To delete all.Delete one : To delete one.: BACK: PAUSE : STOP: PLAYmx-c99en(0428)  2004.4.29  6:34 PM  Page 94
96 97CAMERA CAMERAPHOTO LIST1.Press  to select “Photo List”.PHOTO NAME LIST1.Press  to select “Photo Name List”.IMAGE MANAGER1.Press  ,,to select “IMAGE Manager”.Press [         ] to display the following items.Send Photo : It makes you reach MMS Menu.Wallpaper : To set for idle mode.Rename : To rename a picture.Information : To display a time and date in picture. Delete All : To delete all.Delete One : To delete one.Delete Multi : To delete several ones.Press [         ] to display the following items.Send Photo : It makes you reach MMS Menu.Wallpaper : To set for idle mode.Rename : To rename a picture.Information : To display a time and date in picture. Delete All : To delete all.Delete One : To delete one.Delete Multi : To delete several ones.mx-c99en(0428)  2004.4.29  6:34 PM  Page 96
98 99CAMERA CAMERALOCK SETTING1.Press  to select “Lock Setting”.2.Enter password and press  to enable lock setting.Camera Lock.Set the phone to camera lock.Photo Lock.Set the phone to photo lock.PASSWORD1.Press  to select “Password”.2.Enter new password and press  .SETTING1.Press  ,,to select “Setting”.The default password is the “1234”.The default password is the “1234”.mx-c99en(0428)  2004.4.29  6:34 PM  Page 98
100CAMERA101MEMORY STATUS1.Press  ,,to select “Memory status”.Displays the used and free memory available in the respective camera. CHAPTER 4PHONEBOOK•Look up•New•PB Settings•Voice mail no.mx-c99en(0428)  2004.4.29  6:34 PM  Page 100
102 103PHONEBOOK PHONEBOOKYour can use either the SIM card or the built-in Contacts database as yourPhonebook. The database can store up to 250 contacts, with three phone numbers per contact along with the contact’s complete postal address and email address.Number of contacts on the SIM card depends on your network. Choice of phonebook is the Options soft key menu in look up menu. (Select use SIM/Use Phone)LOOK UPWhen you select “SIM” in Select PB of options. (Press      )1.Press  ,to select “SIM: Look up”.2.Scroll to find the desired contact and press   .3.Press  to make a call.When you select “Phone” in Select PB of options (Press      )1.Press  ,.to select “Look up”.2.Scroll to find the desired contact and press   .3.Press  to make a call.Press [       ]and you will see the following items displayed.New Delete allSelect PBDeleteEdit  Call SearchView Press [       ]and you will see the following items displayed.New Delete allSelect PBSortingDeleteEdit  Call SearchView This is selected as ALL when youpurchase the phone.mx-c99en(0428)  2004.4.29  6:34 PM  Page 102
104 105PHONEBOOK PHONEBOOKWhen “Use Phone” is selected.1.Move to each field and press  to enter its information accordingly.2.Press  to save it after entering information.NEW To  add a contact to the SIM phonebook:1.Press  ,.When “To SIM” is selected.1.Move to each field and press  to enter its information accordingly.2.Press  to save it after entering information.- A text editor appears.- Enter a name and press [        ]. Scroll [        ].- Enter a phone number and press [       ]. If you have chosen Phone as your phonebook, up to three numbers can be entered along with address information for each contact.All the above data can be entered.1.First name 2.Last name 3.Home 4.Mobile5.Work 6.Calling group 7.Address 8.Zip code9.City 10.Province 11.Country 12.E-mailIf a different SIM card is inserted in the phone, you will be alerted of the option to copy data from this.You may also copy data to SIM cards, thus enabling you to share contact information with friends andcolleagues. Copy features are located in the PB Settings submenu. (Optional)mx-c99en(0428)  2004.4.29  6:34 PM  Page 104
106 107PHONEBOOK PHONEBOOKFIXED LIST1.Press  to select “Fixed list”.BARRED LIST1.Press  to select “Barred list”.OWN NUMBER1.Press  to select “Own number”.SETTINGSTo  alter settings in the Phonebook:1.Press  ,.SHORTCUT DIAL1.Press  to select “Shortcut dial”.Make calls using only one or two keys. Define a key combination (2-21) for yourmost accessed contacts. To include or remove a contact in the shortcut dial list,select a position and:-Select New or Delete in the Options softkey menu.-Choose the appropriate contact from the phone book. Press [       ].-Any previous contact on the selected position will be overwritten.If you select SIM as your Phonebook, you will not be able to use Contacts databasefeatures (three phone numbers, address information), but still allowed to use callergroups or shortcut dial.Use this to create a list of allowed numbers. When Active       is ticked, the user canonly access the listed numbers. Requires PIN 2 (see p. 82).Use this to create a list of barred numbers (if supported by network). If activated, the user can not access barred numbers. Requires PIN 2.Store your own number for future reference. Some SIM cards will install your phonenumber automatically. If yours is not, simply enter it in the editor and press [       ].mx-c99en(0428)  2004.4.29  6:34 PM  Page 106
108 109PHONEBOOK PHONEBOOKCOPY1.Press  to select “Copy”.MEMORY STATUS1.Press  to select “Memory status”.This function stores saved data in phonebook to sim card or sim to phone book.Displays the used and free memory available in the respective phonebooks. Reset Phone memory or SIM memory on left softkey. Be advised that this will erase all entries in the Phonebook that is reset.VOICE MAIL NO.1.Press  ,.2.Enter a Voice mail number.- The options softkey allows you to do the following items.(Lookup / Back / Save)Service numbers.This is a network service and the menu will only appear if your network operator supports this service.The menu may contain various services, depending on the network.mx-c99en(0428)  2004.4.29  6:34 PM  Page 108
110MEMO111CHAPTER 5MISCELLANEOUS•Menu summary•Cellular phone in brief•Abbreviations and acronyms•Questions and answers•Technical datamx-c99en(0428)  2004.4.29  6:34 PM  Page 110
112 113MENU SUMMURY MENU SUMMURYMessagesSMSWrite new SMSInboxOutboxDelete      InboxOutboxDelete allTemplateMemory status SettingsFormatSC numberValidityBearerOptionsSMS class 0Verify sendUse templateReply pathStatus ReportMMSCreate MsgInboxOutboxDraftsSentConfigCell BroadcastReadSettingsEnabledChannelsLanguagesInternetHomeBookmarksSelectEditAddDeletePush inboxPush settingsAllow pushSL. SettingsWAP ProfilesGateway 1~5 DefaultHomepageCSDUserNamePasswordDial-up numberIP AddressData TypeData speedIdle timeoutGPRSUser namePasswordAPNIP addressBearerConnect ModeSecurityShow graphicsRenameEmpty cacheOrganizerCalendarDay viewMonth viewNewMeetingBirthdayMemoDeleteAllWeek oldMonth oldTasksAlarmAlarm 1~3Select allCancel allCalculatorGamesMini GolfMirror in actionParking warMyphoneImageAudio        Incoming callmx-c99en(0428)  2004.4.29  6:34 PM  Page 112
114 115MENU SUMMURY MENU SUMMURYAlert tuneAlert typeVolumeSMS AttentionAlert tuneAlert typeVolumeDurationKeypad TypeNatural ToneDTMFMuteInfo TonesOnOffConnect ToneOnOffSlide TuneSlide Tune 1Slide Tune 2Slide Tune 3OffWallpaperGreetingText editSelectionsGreeting toneCaller groupsPrivateBusinessFriendsFamilyOthersLight & LCDBacklight timeLCD Power SaveMy Menu keySettingsAuto key lockTime & DateSet time/DateSummer TimeTime zoneDate formatLanguageDataData cableBitrateResetGPRSAttach onGPRSAttach onAccept callsSecurityPIN Code 1Change PIN 1Change PIN 2SIM LockNetworkSelect NetworkAutomaticManualPreferred netAdd networkCall settingsCall ForwardUnconditionalActivateCancelStatusAll UnansweredActivateCancelStatusNo ReplyActivateCancelStatusNot ReachableActivateCancelStatusBusyActivateCancelStatusStatus AllCancel AllCall waitingActivateCancelStatusOptional func.RedialShortcut DialSlide Openmx-c99en(0428)  2004.4.29  6:34 PM  Page 114
116 117MENU SUMMURY MISCELLANEOUSYour cellular phone is essentially a highly sophisticated radio, basically no different from any othertwo-way radio system. The ingenuity of the cellular system lies in the splitting of the broadcasting environment into a multitudeof relatively small cells with low-power transmitters.This “Cellular approach” to radio communication allows for extensive frequency reuse so that millions of people can use their mobile phones simultaneously although the number of frequencies arelimited. The broadcasting cells are commonly illustrated as hexagons, typically 10 square miles in areawith the base station in the center. This arrangement allows for non-adjacent cells to use the same frequencies without risk of interference.Your cellular phone is in constant contact with the nearest base station. As you move from cell to cell, e.g.while driving in your car, the base station you are approaching takes over when you are within reach. This happens within split seconds without your noticing it. All you experience is a stable and clear connection.However, not all network operators provide the same coverage in all areas. Hence, if you travel near thelimit of your network’s coverage, you may experience difficulties in maintaining the connection. The same may hap pen if the radio signal is blocked by obstacles such as high trees, hills or buildings,or if you are inside a heavily reinforced concrete building.Call BarringCancel AllOutgoing CallsCancel AllAll CallsAll Internat.Except to HomeIncoming CallsCancel AllAll Incoming callswhen abroadPasswordBillingTotal callsLast callSet max unitsUnits leftPrice/UnitCurrencyReset settingsCameraPhoto Motion ShotviewImage managerPhoto listPhoto name listSettingsLock settingPasswordMemory statusPhone BookLook UpNewSettingsShortcut dialFixed listBarred listOwn NumberCopyMemory statusVoice Mail noCELLULAR PHONE IN BRIEFmx-c99en(0428)  2004.4.29  6:34 PM  Page 116
118 119MISCELLANEOUS MISCELLANEOUSTo  remedy the situation move closer to the nearest mast if possible or seek higher ground. If you areinside a building, try moving towards a window.What is roaming? Roaming is the technique that allows subscribers to move from one cell to another orfrom one network to another without affecting the call.What is digital? Early cellular phones relied on analogue systems. Analogue radio systems transmit the voice signal in its original form, whereas digital technologytransforms the microphone signal into number sequences (digits) and transmit these. When received, the digital signal is decoded so that you can hear the sender’s voice. Digital signals do not degrade in quality as long as the data is received, and they can be compressed to take up less memory.What is Tri Band? Atri band cell phone has the capability to automatically switch betweenfrequencies and can thus operate on two or more frequency bands, e.g. 900,1800, and 1900 Mhz.What is GSM? Global System for Mobile communications is the most widespread standard for digital communication in Europe, Australia and in large parts of Asia and Africa. GSM uses frequencies in the 900 and 1800 Mhz bands.What is APN? APN stands for Access Point Name and is basically an URL address on the MobileInternet.What is GPRS? General Packet Radio System is a service protocol built on GSM technology. GPRS allows several mobile phone users to share the same connection. Charges may thus be based onthe amount of transferred data rather than on airtime.What is CSD? Awireless service protocol used for WAP. CSD stands for Circuit Switched Data and willenable continuous connection and payment by the amount of data transferred.What is SIM? Subscriber Identity Module or SIM is the little gold-plated plastic card that you get from yournetwork operator and which holds the unique data the network needs to identify your phone.What is PIN and what is PUK? Access to use a cell phone is most often protected by a code known as“PIN” - Personal Identification Number. Your SIM card comes with a default PIN that you can change toany code you prefer. See p. 80 for details. If you forget your code, or by mistake enter a faulty code threetimes in a row, the SIM card will lock. To unlock, you must enter the Personal Unblocking Key or “PUK”code that came with your SIM card.What is IMEI? IMEI stands for International Mobile Equipment Identifier and is an identification systemthat can recognize every mobile phone by a specific number. If a phone is stolen, the IMEI system is capable of blocking it on all network operators that support the system.What are MCC and MNC? Mobile Country Code is a code that identifies the country in which the subscriber lives. Mobile Network Code identifies the network operator.What is DTMF? Dual Tone Multi Frequency or DTMF is a paging and remote control protocol that allowsyou to control certain functions via your phone, e.g. listening to your answering machine.ABBREVIATIONS AND ACRONYMSmx-c99en(0428)  2004.4.29  6:34 PM  Page 118
120 121MISCELLANEOUS MISCELLANEOUSWhat is Cell Broadcast? Cell Broadcast is a service from your network provider. With CB, you will be alerted when entering a “cheap zone” or you can obtain traffic information, weather reports and other important infor-mation sent to you as text messages. Some providers also offer sports results, news bulletins or evencommercials. If offering CB services, your network will forward a list of services and the relevant chan-nels to enter.What is WAP? Wireless Application Protocol or WAP is a standard that allows you to access parts of the Internet, knownas “Mobile Internet” via your cell phone. Using WAP will open many services to you, i.e. news and weath-er forecasts, ordering services and goods, accessing databases and more. What is an URL? Uniform Resource Locator or URL is an address system used on the Internet. All WAP homepages havea unique address, allowing browsers to distinguish one from the other. An URL always start with the textstring: http://wap followed by the address.What is ISP? ISP stands for Internet Service Provider.Q:My phone does not switch on when I press the  key ?A:The keypress has been too short or the phone has shut down because the battery power level is too low to make calls. Recharge the battery fully.Q:Stand-by time seems too short ?A:You have made excessive use of the games or the Organizer or display light has been on continously due to unintentional key activation. Apply Keypad lock in left softkey menu.Q:My phone displays: ‘PLEASE INSERT SIM’?A:You must insert the SIM before you can use the phone. If it is already installed, remove and    clean the blank area with a dry cloth, then reinsert.Q:My phone displays: ‘INVALID SIM’?A:The phone is SIM-locked and will not accept the inserted SIM. Insert the correct SIM or contact your dealer.Q:My phone displays: “EMERGENCY CALLS ONLY”?A:Your SIM card is not properly installed or configured, or you are out of network range. Q:My phone displays: “NO NETWORK” ?A:You are outside network range or there is no clear path to the transmitter. If you are inside a building, try moving towards a window.QUESTIONS AND ANSWERSmx-c99en(0428)  2004.4.29  6:34 PM  Page 120
122 123MISCELLANEOUS MISCELLANEOUSQ:Some calls are not processed. What is wrong?A:A call bar has been set to restrict phone usage. Check call barring and cancel as necessary.Q:Someone else is receiving my calls. What is wrong?A:The phone has been set to forward your calls to another number. Cancel call forwarding as necessary. Q:Can I send and receive emails and surf the Mobile Internet on my phone?A:Yes. Your phone has WAP capability, which means that you can access the Mobile Internet from your phone. For sending and receiving emails, please contact your network operator.Q:What is T9?A:T9 text input is a predictive text editor that allows you to type using just one click per letter, thus saving time when writing SMS, text entries, etc. Q:What type of networks are supported?A:Check the technical specifications on p. 124.Q:Can I use my phone inside a car?A:Road safety comes first. Always keep your eyes on the road if you are driving. You can install a “Hands free” set (see. p. 8) if you need to drive and talk at the same time. Always comply with local legislation.If your car is equipped with airbags, check safety precautions with your car dealer. See also “Warnings” .Q:How do I clean my phone if it becomes soiled?A:See “Cell phone care” on p. 128.Q:Are cellular phones dangerous to my health?A:No unambiguous scientific evidence exists at this point of time. We recommend that you keep  abreast with the advice given by your domestic health authorities. See also “Warnings” .Q:My phone has been lost or stolen. What do I do?A:Contact your network operator immediately to close your account and prevent misuse. Report your phone stolen to local police.Q:How do I reset my phone to factory defaults?A:Enter the Settings menu and scroll to “Reset all”.mx-c99en(0428)  2004.4.29  6:34 PM  Page 122
124MISCELLANEOUS125TECHNICAL DATAPhysical propertiesSize : W-47 H-83 D-22 (mm)Weight : 90gDisplay : 65K Color (128X128 pixels)PerformanceEGSM : 900  DCS :1800  PCS :1900GPRS : Class 10Standby : Standard-72h, Extend-96hTalk time : Standard-5h, Extend-8hCharging time : Standard-100h, Extend-150hRadiation (SAR) : 2 w/kg averaged over a 10g cubeCommunication featuresLong SMS (456 latin chr.)EMS (Sound & Picture attachment)Call wait & Call holdConference call (Up to 5 participants)Call forwarding & Call barringBilling (AoC)WAPPersonalizing featuresGreetingWallpaper40 Polyphonic ring tones5 Caller groupsOrganizing featuresCalendarTasksAlarmCalculatorLeisure3 gamesAccessoriesContact local retailerCHAPTER 6SAFETY•Safety Information for Wireless Handheld Phones •Cell Phone Care•Driving Safety•Electronic Devices•Other Safety Guidelines•Cautions•Warning•FCC RF exposuremx-c99en(0428)  2004.4.29  6:34 PM  Page 124
126 127SAFETY SAFETYRead This Information Before Using Your Handheld Portable Cellular Telephone.EXPOSURE TO RADIO FREQUENCY SIGNALSYour wireless handheld portable telephone is a low power radio transmitter and receiver.  when it is ON,it receives and also sends out radio frequency (RF) signals.In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines withsafety levels for handheld wireless phones.  Those guidelines are consistent with the safety standardspreviously set by both U.S. and international standards bodies:ANSI C95.1 (1992) *NCRP Report 86 (1986) *ICNIRP (1996) *Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature.  For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C951).The design of your phone complies with the FCC guidelines (and those standards).˙;American National Standards Institute;National Council on Radiation protection and measurements; International Commission on NonionizingRadiation Protection.ANTENNA CAREUse only the supplied or an approved replacement antenna.  Unauthorized antennas, modifications, orattachments could damage the phone and may violate FCC regulations.SAFETY INFORMATION FOR WIRELESS HANDHELD PHONESmx-c99en(0428)  2004.4.29  6:34 PM  Page 126
128 129SAFETY SAFETYYour phone is a state-of-the-art electronic device that will serve you well for many years provided it getsa minimum of attention and care from you. You should never attempt to open the phone casing.There areno user-serviceable parts inside,and you might damage sensitive electronic circuits and components.Unauthorized disassembly will void the warranty. You should never leave your phone in the window ofyour car or otherwise expose it to strong sunlight or excessive heat for a prolonged period of time as thismay damage it. You should never handle your phone with wet hands or expose it to moisture or liquids ofany kind.Continuous changes from a cold to a warm environment may lead to condensation inside thephone,resulting in corrosion and possible damage. If you pack your cell phone in your suitcase duringtravel,beware not to damage it.Cramming a suitcase may crack the LCD display.Remember to switch offyour phone during air travel. Like with all other radio devices,touching the built-in antenna area duringtelephone conversation may impair the quality and lead to shorter stand-by time due to increased powerconsumption. The battery.Your phone is equipped with a high-performance Li-Ion battery. Optional battery types maybe available, check with your local retailer. Observe the maintenance guidelines and your battery shouldgive you a long service life.- At the beginning of the battery’s life, fully charge and discharge (let it go flat)three times.- Avoid repeated short charging.It is preferable to let the battery go flat and then recharge it   completely.- Avoid charging in strong heat or extreme cold.Ambient room temperature is preferable.- Don’t keep a battery near a fire and attempt to disassemble it. - Use only the battery approved by manufacturer- Never replace battery by an incorrect type.- Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to contact unprotected skin.- Never short-circuit the battery,as it may overheat and course a fire.Keep away from jewelry and other metal objects.- Never dispose of the battery by burning it.It could explode and release harmful substances into the environment.- Never dispose of the battery with your regular household waste.Take it to a hazardous material collection point.The charger.Use only the charger supplied with the phone.Newer pull charger cord to release it frommains,pull the charge itself.Cleaning & storing.Your phone should always be handled with care,protected from dirt,dust anddamp.To avoid scratches,never place the phone face down.If cleaning is necessary,switch the phone off and wipe carefully with a a soft,slightly damp (not wet)cloth.Allow the phone to dry completely before switching it on.Never use solvents for cleaning. If you wont use your phone for some time,fully charge the battery and store the phone in a dry place awayfrom direct sunlight.The phone should be switched off during storage.Point store member:-Never disassemble the phone or battery.-Never expose the phone to heat or strong sunlight.-Never expose the phone to moisture or liquids of any kind.-Do not paint the phone or otherwise block keypad,microphone or earpiece function,i.e.with stickers-The battery has its optimum performance in an ambient temperature of +5 °C to +50 °CCELL PHONE CAREmx-c99en(0428)  2004.4.29  6:34 PM  Page 128
130 131SAFETY SAFETYTalking on the phone while driving is extremely dangerous and is illegal in some states.  Remember, safety comes first.  Check the laws and regulations on the use of phones in the areas where you drive.Always obey them.Also, if using your phone while driving please:Give full attention to driving.  Driving safely is your first responsibility.Use hands-free operation, if available.Pull off the road and park before making or answering a call, if driving conditions require.If you must use the phone while driving, please use one-touch, speed dialing, and auto answer modes.An airbag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the airbag or in the air bag deployment area.  If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.WARNING:  Failure to follow these instructions may lead to serious personal injury and possible property damage.Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may not be shielded against the RF signals from your wirelessphone.PacemakersThe Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker.  These recommendations are consistent with the independent researchby and recommendations of Wireless Technology Research.If you have a pacemaker:ALWAYS keep the phone more than six inches from your pacemaker when the phone is  turned on.Do not carry the phone in a breast pocket.Use the ear opposite the pacemaker to minimize the potential for interference.If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.Hearing AidsSome digital wireless phones may interfere with some hearing aids.  In the event of such interference,you may want to consult your service provider (or call the customer service line to discuss alternatives).DRIVING SAFETY ELECTRONIC DEVICESmx-c99en(0428)  2004.4.29  6:34 PM  Page 130
132 133SAFETY SAFETYOther Medical DevicesIf you use any other personal medical device, consult the manufacturer of your device to determine if theyare adequately shielded from external RF energy  Your physician may be able to assist you in obtainingthis information.Turn your phone OFF in healthcare facilities when any regulations posted in these areas instruct you todo so.  Hospitals or healthcare facilities may be using equipment that could be sensitive to external RFenergy.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.Check with the manufacturer or its representative regarding your vehicle.  You should also consult themanufacturer of any equipment that has been added to your vehicle.Posted FacilitiesTurn your phone OFF where posted notices so require.AircraftFCC Regulations prohibit using your phone while in the air.  Switch OFF your phone before boarding an aircraft.Blasting AreasTo  avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areasposted:  “Turn off two-way radio.”  Obey all signs and instructions.Potentially Explosive AtmospheresTurn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs andinstructions.  Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not always, clearly marked.  They includefueling areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the aircontains chemicals or articles, such as grain, dust, or metal powders; and any other area where you wouldnormally be advised to turn off your vehicle’s engine.OTHER SAFETY GUIDELINESmx-c99en(0428)  2004.4.29  6:34 PM  Page 132
134SAFETY SAFETYYour Handheld Portable Telephone is a high quality piece of equipment.Before operating the equipment,read all instructions and cautionary markings on (1)AC Adaptor (2)Battery and (3)ProductUsing Battery.1.DO NOT use this equipment in an extreme environment where high temperature or                      high humidity exists.2.DO NOT abuse the equipment.Avoid striking,shaking or shocking.When not using the unit,lay down the unit to avoid possible damage due to instability.3.DO NOT expose this equipment to rain or spilled beverages.4.DO NOT use unauthorized accessories.5.DO NOT disassemble the phone or its accessories.If service or repair is required, return unit to an authorized Audiovox cellular service center.If unit is   disassembled,the risk of electric shock or fire may result.6.DO NOT short -circuit the battery terminals with metal items etc.7. Use only the battery approved by manufacturer8. DO NOT replace battery by an incorrect type.The following offenses are punishable by fine, imprisonment, or both:Using obscene, indecent, or profane language.Using the unit to give off false distress calls.Wiretapping or otherwise intercepting a telephone call, unless that person has first obtained the consent of the parties participating in the call.Making anonymous calls to annoy, harass, or molest other people.Charging to an account without authorization to avoid payment for service.Refusing to yield a party line when informed that it is needed for an emergency call (It is also unlawful to take over a party line by stating falsely that it is needed for an emergency).This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.CAUTION WARNINGThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: -- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help. 135mx-c99en(0428)  2004.4.29  6:34 PM  Page 134
136 137SAFETYSAFETYIn August 1996 the Federal Communications Commission (FCC) of the United States with its action inReport and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations.Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin,a minor burn may result. Please contact your local dealer for replacement antenna.Body-worn OperationThis device was tested for typical body-worn operation with the back of the phone kept 12mm from thebody. To comply with FCC RF exposure requirements, a minimum separation distance of 12mm must bemaintained between the user’s body and the back of the phone, including the antenna, whether extend-ed or retracted. All belt-clips, holsters and similar accessories used by this device must not contain anymetallic components. Body-worn accessories that do not meet these requirements may not comply withFCC RF exposure limits and should be avoided.Vehicle Mounted External Antenna(optional, if available)Aminimum separation distance of 7.9 inches (20cm) must be maintained between the user/bystander andthe vehicle mounted external antenna to satisfy FCC RF exposure requirements.Note: For more information about RF exposure, please visit the FCC website at www.fcc.govFCC RF EXPOSUREWARNING! Read this Information before using your phone.mx-c99en(0428)  2004.4.29  6:34 PM  Page 136
138DECLARATION OF CONFORMITY Conformity Assessment Principles Complies with the essential requirements of Article 3 of the R&TTE Directive 1999/5/EC, if used for its intended use and that the following standards has been applied: 1. Health (Article 3.1.a of the R&TTE Directive) Applied standard(s) : EN50360:2001 2. Safety (Article 3.1.a of the R&TTE Directive) Applied standard(s): EN 60950:2000 3. Electromagnetic compatibility (Article 3.1b. of the R&TTE Directive) Applied standard(s): EN 301 489-1: v1.4.1 and EN 301 489-7: v1.2.1 4. Efficient use of the radio frequency spectrum (Article 3.2 of the R&TTE Directive) Applied standard(s): EN 301 511: v 9.0.2 We hereby declare that all essential radio test suites have been carried out and thatthe above named product is in conformity to all the essential requirements ofDirective 1999/5/EC.139INDEXAPageAdvice of Charge 15~17Aircraft 133Alarm 60Alert 66Any key answer 87Antenna care 127Audio 66Auto key Lock 76BPageBacklight time, display 74Battery, charge 15~17Bearer, WAP 52Billing 89Bookmarks, WAP 47CPageCache, WAP 54Calculator 61Calendar 55~58Call, make a 23Call barring 88Call forwarding 85Call, answer a 24Call, emergency 25Call, incoming 24Call, optional functions 86Call waiting 86Caller group, include in 72Camera 91Car safety 130Cell Broadcast 43Cell phone care 128Charger 15~16Config, MMS 42Contact, look up 103Contact, new 104Create, MSG 38mx-c99en(0428)  2004.4.29  6:34 PM  Page 138
140 141INDEX INDEXDPageData 79Default, reset to 90Dial-up number, WAP 51Display 10Draft, MMS 41Driving, caution 130EPageEmergency call 25Entertainment (Games) 62GPageGames 62GPRS 51Greeting 70HPageHandset description 9Hands-free set 8Hearing aides, caution 131Homepage, WAP 46IPageImage manager, Camera 96Inbox, PUSH (WAP) 48Inbox, MMS 40Inbox, SMS 33Incoming call, audio 66International calls 25KPageKeypad 11LPageLanguage 78LCD power save 74List, Camera 96Lock, Camera 98MPageMemory status, phonebook 108Memory status, Camera 100Message 30~37MMS 38Motion, Camera 94My menu key 75NPageNavigation key 13Network 83OPageOne key dialing(shortcut dial) 87Organizer 55~61Outbox, MMS 40Outbox, SMS 33PPagePacemaker, caution 131Password, WAP 51Password, Camera 99Phonebook 102Photo, Camera 91QPageQuestions & Answers 121RPageRead SMS 32Redial call 87Reset to default 90SPageSafety 126Security 80Sent, MMS 41Service numbers 109Silent (Mute) 9, 11SIM, install 21~22mx-c99en(0428)  2004.4.29  6:34 PM  Page 140
142INDEXSIM lock 83Shot, Camera 94Slide Tune 68SMS 30Softkeys 11Stand-by time 124TPageT9 text editor, entering letter 26Talk time 124Technical data 124Time, set 76UPageUnlock SIM 80VPageValidity, SMS 36View, ccamera motion 95Voice mail 109Volume, earpiece 9WPageWAP,   homepage 46WAP,   sites 46WAP,   profiles 49WAP,   set connection 46Warnings 135Welcome 4mx-c99en(0428)  2004.4.29  6:34 PM  Page 142

Navigation menu