Medeco Security Locks 101500X Electronic lock – wireless IEEE 802.15.4/2.4GHz and RFID/13.56MHz User Manual CERTIFICATE OF COMPLIANCE

Download:
Mirror Download [FCC.gov]
Document ID	1856818
Application ID	BqBmFykXvQzmMED8l5YOPw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.8kB (972455 bits)
Date Submitted	2012-12-11 00:00:00
Date Available	2012-12-11 00:00:00
Creation Date	2012-11-29 16:32:53
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2012-11-29 16:33:10
Document Title	CERTIFICATE OF COMPLIANCE
Document Creator	Acrobat PDFMaker 9.1 for Word
Document Author:	Systems Administrator

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Appendix K:
Client: Medeco Security Locks, Inc.
Model #’s: 10-15007 & 10-15009
Standards: FCC 15.247/IC RSS-210
ID’s: VR3-101500X/7465A-101500X
Report #: 2012180DTS
Manual
Please refer to the following pages.
Page 38 of 42
Medeco Aperio M100 Installation Instructions
Parts List
The M100 installs in a similar fashion to a mechanical mortise lock, and requires
the same adjustments to function properly with the mortise hardware. The
following steps outline the mechanical installation and pairing to the hub. Please
refer to the EAC panel or software provider’s specific instructions for
programming and managing the M100.
Removal of Existing Cylinder
Remove the door-edge trim by removing the retaining screws and gently prying
the trim plate loose.
Loosen the cylinder clamp screw far enough to allow the existing cylinder to be
removed.
Using a key partially inserted, rotate the mortise cylinder counter-clockwise to
remove it. Also remove any trim rings if they are used.
Installation of M100:
Verify that the cam on the M100 is the same style as was on the cylinder that was just removed. If the
removed cylinder is a Medeco brand, the cam can be interchanged onto the M100. If different brands,
please refer to the chart found at www.Medecocams.com
Screw the M100 into the cylinder mounting hole on the mortise hardware. It is important to
not over tighten, or to keep too loose on the door. The M100 should fit snugly against the
mortise escutcheon.
Re-tighten the cylinder clamp screw with the M100 in a vertical position. The screw should
engage tightly in the slot along the edge of the cylinder so that cannot rotate.
Re-Install the door edge trim
Add back plate and locking nut
Tighten with Locking Nut tool
Connect Wire Housing to wire harness
Install Battery
Install cover Assembly
Install Knob and Set Screw
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Systems Administrator
Create Date                     : 2012:11:29 16:32:53-07:00
Modify Date                     : 2012:11:29 16:33:10-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2012:11:29 16:33:10-07:00
Creator Tool                    : Acrobat PDFMaker 9.1 for Word
Format                          : application/pdf
Title                           : CERTIFICATE OF COMPLIANCE
Creator                         : Systems Administrator
Document ID                     : uuid:9b349e10-c949-44a1-bd42-95ab4476cd78
Instance ID                     : uuid:f14a913c-88b9-4dd1-b3b2-ca4ff6ea5d6e
Producer                        : Adobe PDF Library 9.0
Page Count                      : 9

EXIF Metadata provided by EXIF.tools