Mercury Innovations Science and Technology A1 Bluetooth Speaker User Manual Users manual

Shenzhen Mercury Innovations Science and Technology Ltd Bluetooth Speaker Users manual

Users manual

USER MANUALBluetooth SpeakerA
LISTEN.MIFATHE MUSIC POWER TO YOUR DEEP HEART!MI FA W E CH ATMI FA  A P Pwww.mifa.net
FCC WARNINGThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inter ference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/T V technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.FCC ID: 2AF7A-A1
Warnings01◆To ensure proper use and trouble-free operation, please carefully read this user manual first.◆For the first use, a full charge is recommended.◆Please use and store the product at room temperature.◆Do not throw and drop the product to avoid damages.◆Do not expose the product to fire, high temperature, direct sunlight, etc. ◆Do not use organic solvents or other chemicals to clean the product. ◆Do not allow small particles to get into the product.◆Please contact the seller if the cable is not matched.◆Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.◆Do not dissemble the product, or make any modifications to the structure or any parts of it.◆Keep the product out of children’s reach.English
Product Features02◎Wireless Bluetooth music playback◎Automatically connects to the last-connected device◎Built-in Mic for hands-free calls◎Aux-in jack and 3.5mm audio cable for non-Bluetooth devices◎Supports up to 32 GB Micro SD card◎Supports MP3, WMA,WAV, FLAC, APE◎Automatically turns off after 10 minutes if there is no manual operation and no device connected◎Supports ring tong playing under IOS system ,others are default toneEnglish
1 × 3.5 mm Audio Cable1 × Micro USB CablePacking Contents031 × User Manual1 × Detachable StrapEnglishUser ManualWarranty Card  1 x Warranty card1 × A1 Bluetooth Speaker
Keys Functions04 EnglishPower Button• Press and hold the button for 2 seconds to turn on or turn off• When playing music, short press to pause or play• When a call coming, short press to answer or hang up; press and hold it for 2 seconds to rejectVolume Down Button• Short press to decrease the volume• Long press to play the previous songVolume Up Button• Short press to increase the volume• Long press to play the next song
Keys Functions05 EnglishOther InstructionsModes Switch• Once powered on, the speaker enters Bluetooth pairing mode by default.• •If it is inserted with a Micro SD card or an audio cable, double press the power button to switch modes in turns: Bluetooth mode  →  Micro SD card mode or Aux-in mode• •If it is inserted with a Micro-SD card and an audio cable, double press the power button to switch modes in turns: Bluetooth mode  → Micro SD card mode  → Aux-in modeRestartIf the speaker doesn't respond to any operation, press and hold the power button for 8 seconds to restart it.LED IndicatorBlue light flashes after powered onBlue light stays on after connected to a deviceBlue light stays on while playingBlue light flashes slowly when playing is pausedBlue light flashes rapidly at the max / min volumeRed light stays on while charging; when fully charged, red light goes off
Ports Functions06 EnglishMI CR OSDMicro SD card slotIn the powered-on state, insert a Micro-SD card into the slot. It will play the music stored in the card automatically after two beeps.Micro USB port• Charging: use a DC 5V / 1A adaptor or connect it to a computer to charge the speaker• Data transmission: in the powered-off state, insert a Micro SD card and then connect it to a computer. It will turn on and you can manage music files in the card on the computer.Aux-in jackIn the powered-on state, insert an audio cable. It will beep to indicate a successful connection.
Bluetooth Connection07 English1. Press and hold the power button for more than 2 seconds until it beeps and the blue LED light flashes.Note1. The speaker will connect to the last-connected device automatically once the device's Bluetooth is turned on.Note2. The operating range is about 10m / 33 feet and will be influenced by the surroundings.2. Turn on the Bluetooth of your device and select Mifa_A1. Once the connection is completed, the speaker will beep and the blue LED light will stay on.Other InstructionsTo connect to another device, press and hold the volume down and volume up buttons simultaneously for more than 2 seconds. The paired one will be disconnected and the speaker will enter the pairing mode.To reconnect it to the last used device, short press the power button.
Specifications08 EnglishSize: 3.3 × 1.8 × 3.4 in / 85 × 46 × 86 mmWeight: 6.2 oz / 175g (including the built-in lithium battery)Speaker Type Portable Bluetooth SpeakerSpeaker System MonoLoudspeaker 1.5 inches internal magnetic speaker + Passive radiatorsInput 5V / 1ABatteryBuilt-in 1200mAh Lithium batteryAbout 3.5 hours with 1A output adaptorCharging TimeOutput Power 5W, THD=10%Frequency80 Hz - 18 KHzUSB Standard USB 2.0 (compatible with USB 1.1)Supported StorageUp to 32 G B Micro SD card (FAT32)Supported Media TypeAPE, FLAC, WAV, WMA, MP31.8 in 3.3 in 3.4 in
Trouble Shooting09Copyright © MIFA. All rights reserved.MIFA, the MIFA logo and other MIFA marks are all owned and registered by MIFA INNOVATIONS LLC. All other trademarks are the property of their respective owners. The information contained here is subject to change without prior notice.MIFA INNOVATIONS LLCwww.mifa.net Designed in USMade in ChinaEnglishNot able to connect to your deviceFAQ Solutions1. Restar t the speaker and try again2. If your device requires a Pin Code, please enter 00001. Please ensure the format of the Micro SD card is FAT32. It only supports FAT32 Micro SD card2. Please ensure the formats of the music files are APE, FLAC, WAV, WMA or MP3No sound when playing1. Please adjust the volume of the speaker2. Please adjust the volume of your device3. Please check if the speaker is pausedKeeps cutting out when playing Please ensure the speaker is within the operating range and there are no obstacles between the speaker and the deviceNot able to play the music in Micro SD cardNo sound in AUX-in mode Please ensure the audio cable is connected wellNot able to turn on Please try to charge the speaker for about 3 .5hoursNo respond to any operation Please try to press and hold the power button for about 8 seconds to reset the speaker

Navigation menu