Mercury Innovations Science and Technology A1 Bluetooth Speaker User Manual Users manual
Shenzhen Mercury Innovations Science and Technology Ltd Bluetooth Speaker Users manual
Users manual
Bluetooth Speaker USER MANUAL www.mifa.net LISTEN.MIFA THE MUSIC POWER TO YOUR DEEP HEART! MIFA APP MIFA WECHAT FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/T V technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2AF7A-A1 01 Warnings English ◆To ensure proper use and trouble-free operation, please carefully read this user manual first. ◆For the first use, a full charge is recommended. ◆Please use and store the product at room temperature. ◆Do not throw and drop the product to avoid damages. ◆Do not expose the product to fire, high temperature, direct sunlight, etc. ◆Do not use organic solvents or other chemicals to clean the product. ◆Do not allow small particles to get into the product. ◆Please contact the seller if the cable is not matched. ◆Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment. ◆Do not dissemble the product, or make any modifications to the structure or any parts of it. ◆Keep the product out of children’s reach. 02 Product Features ◎Wireless Bluetooth music playback ◎Automatically connects to the last-connected device ◎Built-in Mic for hands-free calls ◎Aux-in jack and 3.5mm audio cable for non-Bluetooth devices ◎Supports up to 32 GB Micro SD card ◎Supports MP3, WMA,WAV, FLAC, APE ◎Automatically turns off after 10 minutes if there is no manual operation and no device connected ◎Supports ring tong playing under IOS system ,others are default tone English 03 Packing Contents English 1 × 3.5 mm Audio Cable 1 × Micro USB Cable 1 × Detachable Strap Warranty Card User Manual 1 × A1 Bluetooth Speaker 1 × User Manual 1 x Warranty card 04 Keys Functions English Power Button • Press and hold the button for 2 seconds to turn on or turn off • When playing music, short press to pause or play • When a call coming, short press to answer or hang up; press and hold it for 2 seconds to reject Volume Down Button • Short press to decrease the volume • Long press to play the previous song Volume Up Button • Short press to increase the volume • Long press to play the next song 05 Keys Functions English Other Instructions Modes Switch • Once powered on, the speaker enters Bluetooth pairing mode by default. • •If it is inserted with a Micro SD card or an audio cable, double press the power button to switch modes in turns: Bluetooth mode → Micro SD card mode or Aux-in mode • •If it is inserted with a Micro-SD card and an audio cable, double press the power button to switch modes in turns: Bluetooth mode → Micro SD card mode → Aux-in mode Restart If the speaker doesn't respond to any operation, press and hold the power button for 8 seconds to restart it. LED Indicator Blue light flashes after powered on Blue light stays on after connected to a device Blue light stays on while playing Blue light flashes slowly when playing is paused Blue light flashes rapidly at the max / min volume Red light stays on while charging; when fully charged, red light goes off 06 Ports Functions English Micro SD card slot In the powered-on state, insert a Micro-SD card into the slot. It will play the music stored in the card automatically after two beeps. Micro USB port • Charging: use a DC 5V / 1A adaptor or connect it to a MICRO SD computer to charge the speaker • Data transmission: in the powered-off state, insert a Micro SD card and then connect it to a computer. It will turn on and you can manage music files in the card on the computer. Aux-in jack In the powered-on state, insert an audio cable. It will beep to indicate a successful connection. 07 Bluetooth Connection 1. Press and hold the power button for more than 2 seconds until it beeps and the blue LED light flashes. 2. Turn on the Bluetooth of your device and select Mifa_A1. Once the connection is completed, the speaker will beep and the blue LED light will stay on. Note1. The speaker will connect to the last-connected device automatically once the device's Bluetooth is turned on. Note2. The operating range is about 10m / 33 feet and will be influenced by the surroundings. Other Instructions To connect to another device, press and hold the volume down and volume up buttons simultaneously for more than 2 seconds. The paired one will be disconnected and the speaker will enter the pairing mode. To reconnect it to the last used device, short press the power button. English 08 Specifications Speaker Type Portable Bluetooth Speaker Speaker System Mono Loudspeaker English 1.5 inches internal magnetic speaker 1.8 in + Passive radiators Input 5V / 1A Battery B uilt-in 1200mAh Lithium battery Charging Time About 3.5 hours with 1A output adaptor Output Power 5W, THD=10% Frequency 80 Hz - 18 KHz USB Standard USB 2.0 (compatible with USB 1.1) Supported Storage Up to 32 GB Micro SD card (FAT32) Supported Media Type APE, FLAC, WAV, WMA, MP3 3.4 in 3.3 in Size: 3.3 × 1.8 × 3.4 in / 85 × 46 × 86 mm Weight: 6.2 oz / 175g (including the built-in lithium battery) 09 Trouble Shooting English FAQ Not able to connect to your device Solutions 1. Restart the speaker and try again 2. If your device requires a Pin Code, please enter 0000 Keeps cutting out when playing Please ensure the speaker is within the operating range and there are no obstacles between the speaker and the device Not able to play the music in Micro SD card 1. Please ensure the format of the Micro SD card is FAT32. It only supports FAT32 Micro SD card 2. Please ensure the formats of the music files are APE, FLAC, WAV, WMA or MP3 No sound when playing 1. Please adjust the volume of the speaker 2. Please adjust the volume of your device 3. Please check if the speaker is paused No sound in AUX-in mode Please ensure the audio cable is connected well Not able to turn on Please try to charge the speaker for about 3 .5hours No respond to any operation Please try to press and hold the power button for about 8 seconds to reset the speaker MIFA INNOVATIONS LLC www.mifa.net Designed in USMade in China Copyright © MIFA. All rights reserved. MIFA, the MIFA logo and other MIFA marks are all owned and registered by MIFA INNOVATIONS LLC. All other trademarks are the property of their respective owners. The information contained here is subject to change without prior notice.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 12 Create Date : 2017:09:05 10:04:25+08:00 Modify Date : 2017:09:05 10:04:25+08:00 Producer : Corel PDF Engine Version 17.6.0.1021 Author : Administrator Creator : CorelDRAW X7 Title : A1 英文认证说明书.cdrEXIF Metadata provided by EXIF.tools