Microsoft RM-154 AMPS/CDMA800/1900 Cell Phone with Bluetooth User Manual

Microsoft Mobile Oy AMPS/CDMA800/1900 Cell Phone with Bluetooth

Manual

1Nokia 6275 and Nokia 6275i User Guide
2Part No. 9250012, Issue No. 1Copyright ©2006 Nokia. All rights reserved.Nokia, Nokia Connecting People, Pop-Port, Nokia 6275, Nokia 6275i, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. Copyright protections may prevent some images, music (including ringing tones), and the content from being copied, modified, transferred, or forwarded.US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2006. Tegic Communications, Inc. All rights reserved.Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.microSD is a registered trademark of the SD Card Association.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 6275 and Nokia 6275i products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may
3cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user’s authority to operate this equipment.
Contents4ContentsFor your safety.................................................................................... 5Welcome.............................................................................................. 81. Phone at a glance ...................................................................... 92. Set up your phone ................................................................... 143. Text entry ................................................................................. 224. Messages................................................................................... 245. Log ............................................................................................ 336. Contacts.................................................................................... 367. Gallery....................................................................................... 428. Media ........................................................................................ 449. Settings..................................................................................... 5010. Organizer .................................................................................. 7111. Catalogs .................................................................................... 8312. Mobile web............................................................................... 8413. Extras ........................................................................................ 8714. PC connectivity ........................................................................ 8815. Enhancements .......................................................................... 8916. Battery information ................................................................. 91Care and maintenance ..................................................................... 94Additional safety information......................................................... 95Index...............................................................................................  100
For your safety5For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.Switch on safelyDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Road safety comes firstObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.InterferenceAll wireless phones may be susceptible to interference, which could affect performance.Switch off in hospitalsFollow any restrictions. Switch the phone off near medical equipment.Switch off in aircraftFollow any restrictions. Wireless devices can cause interference in aircraft.Switch off when refuelingDo not use the phone at a refueling point. Do not use near fuel or chemicals.Switch off near blastingFollow any restrictions. Do not use the phone where blasting is in progress.Use sensiblyUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.Qualified serviceOnly qualified personnel may install or repair this product.
For your safety6Enhancements and batteriesUse only approved enhancements and batteries. Do not connect incompatible products.Water-resistanceYour phone is not water-resistant. Keep it dry.Backup copiesRemember to make back-up copies or keep a written record of all important information stored in your phone.Connecting to other devicesWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.Emergency callsEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as Mobile web require network support for these technologies.
For your safety7■About your deviceThe wireless device described in this guide is approved for use on the CDMA 800 and 1900, and AMPS 800 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and legitimate rights of others. When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.■Shared memoryThe following device features may share memory: contacts; text messages; photos, images, and tones in the gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, and tones in the gallery; text messages; and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.
Welcome8WelcomeCongratulations on your purchase of the Nokia mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, camera, MP3 player, video recorder, and more. Your phone can also connect to a PC, laptop, or other device using a USB data cable, Bluetooth wireless technology, or infrared. ■Getting helpCheck www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.Find your phone labelIf you need help, the Nokia Care Contact Center is available for assistance. Before calling, we recommend that you write down the Electronic serial number (ESN) or Mobile Equipment ID (MEID) and have it available.The ESN or MEID is found on the type label, which is located beneath the battery on the back of the phone. See "Remove the back cover," p. 15 and "Remove the battery," p. 15.UpdatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. An interactive tutorial for this product may be available at www.nokiahowto.com.Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the Web site at www.nokiaaccessibility.com.
Phone at a glance91. Phone at a glance■Keys and partsFront viewEarpiece (1)Display (2)Scroll key (3)Right selection key (4)End and power key (5)Keypad (6)Pop-Port™ connector (7)Microphone (8)Charger port (9)Call key (10)Left selection key (11)Center selection key (12)
Phone at a glance10Side viewsVolume key (1)Camera flash and self-portrait mirror (2)Camera lens (3)Camera key (4)Loudspeaker (5)Headset connector (6)Infrared (7)■Standby modeDepending on your wireless service provider and the model number of your phone, some or all of the following selection keys may appear in the standby mode.The standby mode indicates that your phone is idle.Signal strength (1)—More bars indicate a stronger network signal.Menu (2)—Press the center selection key to select this option.Go to (3)—Press the left selection key to select this option.Names or network operator menu (4)—Press the right selection key to select this option.Battery level (5)—A filled in battery indicates more power.
Phone at a glance11■Quick keysDepending on your wireless service provider and the model number of your phone, some or all of the following scroll key shortcuts may be available in the standby mode.In the standby mode, the four-way scroll and center selection keys instantly take you to frequently-accessed menus:Scroll up key—Go to the camera.Scroll right key—View the calendar.Scroll down key—Go to the contacts list.Scroll left key—Create a text message.Center selection key—Display available applications or selects highlighted menus and submenus. ■Indicators and iconsTo view the icons on your phone, select Menu > Settings > Phone details > Icon details.■Phone menusPhone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.Scroll method1. To select Menu, use the center selection key. To scroll through the main menu, use the scroll key.On the right side of the screen, a scroll bar is displayed with a tab that moves up or down as you move through the menus. This provides a visual representation of your current position in the menu structure.
Phone at a glance122. When you arrive at a menu, to enter submenus, press Select (the center selection key).To return to the previous menu, select Back from the submenu level.To return to the standby mode from any menu or submenu, press the end key.Main menu displayYou can control whether your phone menu is displayed as a List, Grid or Grid with labels. By default, the main menu displays in Grid with labels format.Select Menu > Options > Main menu view > List, Grid, or Grid with labels.If supported by your wireless service provider, you can also change the order of menus in your main menu.Select Menu > Options > Organize. Scroll to a menu, and select Move. Use the scroll key to move the menu to a new location, and select OK. You can repeat this procedure to customize your main menu.To save the changes, select Done > Yes.In-phone helpMany features have brief descriptions (help text) that can be viewed on the display. To view these descriptions, scroll to a feature, and wait for about 15 seconds. Scroll down to view all of the description, or select Back to exit.In order to view the descriptions, you must activate help text. Select Menu > Settings > Phone > Help text activation.■Security code settingsYour device has a security option allowing you to lock your phone with a PIN code. When the PIN code is set and turned on, no outgoing calls are allowed and the menu cannot be accessed without entering the correct code first. This prevents unauthorized outgoing calls or access to any information stored on your device.The PIN code option is in the Settings menu. The first time you access the Security option, you must enter a PIN code. The default PIN code may vary depending on your wireless service provider who provided your UIM card. The PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits in length. After three successive incorrect entries, the PIN code is
Phone at a glance13blocked. You need to enter the personal unblocking key (PUK) code. See"Personal unblocking key (PUK) code," p. 69.■Go to functionsThe Go to menu allows you to change the function of the left selection key on your phone so that your most frequently used functions can be quickly accessed from the Go to menu in the standby mode. Select options1. Select Go to > Options > Select options, and scroll to the options you want to add.2. Select Mark to add an option or Unmark to remove an option.3. When you have marked or unmarked the desired options, select Done; to save the changes, select Yes.4. Select Go toto display a list of the options that you selected in step 3.Organize functionsSelect Go to > Options > Organize. Scroll to an option, and select Move. Scroll to move the option to a new location, and select OK. You can repeat this procedure to customize your Go to menu. To save the changes, select Done > Yes.
Set up your phone142. Set up your phone■AntennaYour device has an internal antenna. Hold the device as you would any other telephone with the antenna area pointed up and over your shoulder.In the Nokia 6275i phone, the internal GPS antenna is activated when placing emergency calls or when On is selected from the Location info sharing menu (a network-dependent feature)."Location info sharing," p. 53.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.■BatteryAlways switch off the power and disconnect the charger before removing the battery. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.Prolonged, continuous use of your device may increase the device temperature. The increased temperature is a normal function of this product and does not pose a safety concern for you or the device. If the temperature is uncomfortable to you, use a headset or allow your device to return to room temperature before your next call.
Set up your phone15Remove the back coverNote: Always switch off the power, and disconnect the charger and any other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached.1. With the back of the phone facing you, press down and hold the back cover.2. Slide the back cover toward the bottom of the phone, lift up, and remove.Remove the batteryAfter you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.Always switch the device off, and disconnect the charger before removing the battery.
Set up your phone16MicroSD cardYour phone has a microSD card slot located under the battery. To insert the microSD card, complete the following steps.Keep all microSD cards out of the reach of small children.1. Remove the battery. Slide the microSD slot cover toward the base of the phone (1), and lift open the microSD slot cover (2).2. Insert the card firmly as shown in the illustration (3), and close the microSD slot cover (4).3. Slide the microSD slot cover toward the top of the phone (5), and replace the battery and back cover.Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device.Important: Do not remove the memory card while reading or writing to the card. Doing so may cause data corruption on the card or the phone.UIM (CDMA SIM) card slotYour phone has a built-in UIM card slot. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot.
Set up your phone17Replace the battery1. Insert the battery, gold-coloured contact end first, into the battery slot.2. Push down on the other end of the battery to snap the battery into place.Replace the back cover1. Set the back cover on the phone with the cover tabs aligned to the slots in the phone. 2. Press the back cover latch down, and slide the back cover toward the top of phone.3. Make sure back cover latch is secure.
Set up your phone18Charge the battery1. Plug the charger transformer into a standard wall outlet.2. Connect the charger to the phone. If necessary, you can use a CA-44 adapter cable (1) to connect a charger and the phone.After a few seconds, the battery indicator in the display scrolls. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.■Turn your phone on or off1. To turn your phone on or off, press and hold the end key for at least 3 seconds.2. Enter the lock code, if necessary, and select OK.■Connect the headsetA compatible headset, such as HS-5, may be included with your phone or purchased separately as an enhancement. See "Enhancements," p. 66.1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your phone.   appears on the display.2. Position the headset on your ear.
Set up your phone19With the headset connected, you can make, answer, and end calls as usual.Use the keypad to enter numbers. Press the call key to place a call. Press the end key to end a call.You can also plug a compatible headset, the such as the HS-9 Universal Headset, into the 2.5-mm stereo headset jack on the side of your phone to allow hands-free operation. See "Enhancements," p. 66.Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.■Make calls1. Enter the phone number, including the area code.For international calls, press * twice for the international prefix (the + character replaces the international access code) and then enter the country code, the area code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.3. To end the call or to cancel the call attempt, press the end key.To make a call using names, search for a name or phone number in Contacts. Press the call key to call the number.To access the list of up to 20 numbers you last called or attempted to call, press the call key once in the standby mode. To call the number, select a number or name, and press the call key.■Answer or reject a callTo answer an incoming call, press the call key. To end the call, press the end key.To reject an incoming call, press the end key. To reject an incoming call, press the end key within1.5 seconds.To mute the ringing tone, press the volume key, or select Silence.To adjust the volume of the earpiece, press the volume key located on the right side of your phone. See "Side views," p. 10. A bar chart is displayed indicating the volume level.
Set up your phone20Note: If the Divert if busy function is activated to forward the calls (for example, to your voice mailbox) rejecting an incoming call also forwards the call.Call waitingIf your network operator supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.1. Select Menu > Settings > Network services > Call waiting > Activate or Cancel.2. During a call, select Answer, or press the call key or voice key to answer the waiting call. The first call is put on hold.3. Press the end key to end the active call.Mute phone during callTo mute your phone during a call, select Mute; to unmute the phone, select Unmute.■Options during a callMany of the options that you can use during a call, are network services. Check with your wireless service provider for more information.During a call, select Options and one of the following:Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.Add new call—Initiate a conference call. See"Make a conference call," p. 21.Save—Save a number entered during a call.Add to contact—Add a number entered during a call to a contact in your list.End all calls—Disconnect from all active calls.Send DTMF—Enter the numbers, and select DTMF to send the numbers as tones.Contacts—View the contacts list.Menu—View the phone menu.Warning: Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud.
Set up your phone21Make a conference callConference calling is a network service that allows you to take part in a conference call with two other participants.1. Make a call to the first participant.2. With the first participant on the line, select Options > Add new call.3. Enter the phone number of the second participant; or to retrieve a number from your contacts, select Search and the number you want to call.4. Press the call key. The first participant is put on hold.5. When the second participant picks up, press the call key to connect the calls.6. To end the conference call, press the end key.■Keypad lock (keyguard)To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad.To unlock the keypad, select Unlock, and press *. If keyguard is on, enter the security code if requested.To answer a call when keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks.When keyguard is on, calls may be possible to the official emergency number programmed into your device.
Text entry223. Text entryYou can use two methods for entering text and numbers: standard mode and predictive text mode. Select Clear to backspace the cursor and delete a character. Select and hold Clear to backspace continuously and delete characters.■Standard modeStandard mode is the only way to enter text into the contacts list and to rename caller groups.Text (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.• Press 0 to enter a space, thereby accepting a completed word.• Press 1 to insert a period into your message.• Press * to display a complete list of special characters.• Press and hold # to bring up the Editor settings (Number mode, Prediction on or Prediction off, Writing language).Numbers (123)To switch to 123 mode from Abc mode, press and hold # at any message entry screen to bring up the Editor settings. Select Number mode, and the device returns to the message entry screen and switches the Abc icon in the upper left corner of the display to the 123 icon (or back).Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. With a character highlighted, select Use to insert the character into your message.■Predictive text modeMuch faster than the standard mode method, predictive text input enables you to write messages quickly using your keypad and the built-in dictionary. In predictive text mode, your phone predicts the words as you enter them.
Text entry23Activate or deactivate1. At any text entry screen, select Options > Prediction on to activate or Prediction off to deactivate.2. If you are turning predictive text on, select the language of your choice.Text entryThe following illustration shows how to enter the word Nokia with predictive text. With the English dictionary selected, press the following number keys one time only (6, 6, 5, 4, 2). The screen displays Nokia by predicting the letter and word, based on your keypad entry:    6 6 5 4 2 •Press 0 to enter a space, and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Previous• If ? appears after a word, select Spell to add the word to the dictionary.•Press 1 to insert a period into your message.•Press and hold * to display special characters. Press * again to cycle through all available characters.■Change case and modePress # to switch between uppercase, lowercase, and sentence case text. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen:. Uppercase text: standard mode is on. Lowercase text: standard mode is on. Sentence case text: standard mode is on. This option is available only at the beginning of a sentence.Note: You can press # within 2 seconds to switch between standard mode and predictive text mode. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence.
Messages244. MessagesIf you have subscribed to a message network service, you can send and receive messages to compatible phones also subscribed to a message service. You can also send and receive multimedia and e-mail messages if supported by your network operator. You can make distribution lists that contain phone numbers and names from your contacts list.Your device supports the sending of text messages beyond the character limit of a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.When composing text or multimedia messages, check the number of characters allowed in the top right corner of the message. Using Unicode characters takes up more space. With Unicode characters in your message, the indicator may not show the message length correctly. Before sending the message, the phone tells you if the message exceeds the maximum length allowed for one message. Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.Note: When you send a message, your device may display Message sent, indicating your device has sent the message to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your network operator.■Text messagesWrite and send1. Select Menu > Messaging > Text messages > Create message.2. Write a message using the keypad.Depending on the messaging service enabled, some or all of the following options are available while writing your message:Sending options > Mark or Unmark > Urgent, Delivery reports, Callback number:, or Signature. Select Sending options for a single message. See "Sending options," p. 29.
Messages25Clear all—Erase all the text from the message editor.Add-ins—Add sounds, animations, or pictures to a text message.Styles—Select font size, font appearance, and text alignment of a text message.Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list.Save—Select Drafts to save the message in the drafts folder or Templates to save the message as one of your predefined templates in the templates folder.Exit editor—Exit the message editor.Use template—Insert a predefined template into your message.Insert smiley—Insert a smiley into your message.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary (only available with predictive text on).Insert symbol—Insert a special character into your message (only available with predictive text on).Writing language—Choose the language you want to use.Prediction on or Prediction off—Turn the predictive text on or off.Matches—View matches in the dictionary for the word you want to use (only available with predictive text on and when the same set of key presses can produce multiple words).3. To send the message, select Send to > Recently used, Send to number, Send to distrib. list (if a distribution list has been created), or Send to many. 4. Enter the recipient’s phone number or e-mail address, or select Search to retrieve a number or e-mail address from your contacts list; select OK.Read messageWhen you receive a message, a notification message and   are displayed.1. Select Show to read the message or Exit to dismiss the notification and read the message later from your inbox. See "View saved messages," p. 27. 2. Scroll up or down to view the whole message, if necessary.OptionsWhen reading a text message, select Options to access some or all of the following options:
Messages26Delete—Discard the message.Use detail—Use or save the number, e-mail address, or Web address.Move—Save the message to Archive, Templates, or a folder you have created.Forward—Forward the message to another phone number or e-mail address.Lock or Unlock—Lock or unlock the message.Rename—Edit the title of the message.Reply to message1. Select Menu > Messaging > Text messages > Inbox and your desired message, or when you receive a message, select Show.2. Select Reply > Empty screen, Original text, Template, or one of the predefined answers; then compose your reply using the keypad.3. After creating the reply, select Send. The sender’s phone number or e-mail is used as the default.TemplatesTemplates are short, prewritten messages you can recall and insert into new text messages when you are short on time.1. Select Menu > Messaging > Text messages > Create message > Options > Use template.2. Select your desired template.3. Select Send to > Recently usedSend to number, Send to e-mail, Send to many, or Send to distrib. list (if a distribution list is created).4. Enter the recipient’s phone number or e-mail address, or select Search to retrieve a number or e-mail address from your contacts list; select Send.Text message foldersSave messagesYou can save drafts of messages or received messages to an existing folder or to a folder that you have created.1. Open the received message or create a new message, and select Options.2. To save a received message, select Move > Archive, Templates, or a folder you have created.
Messages27To save the draft of a message you have created, select Save > Drafts or Templates.View saved messages1. Select Menu > Messaging > Text messages.2. Select the folder containing the message you want to view:Inbox—Automatically stores any incoming messagesOutbox—Stores messages that have not been sentSent items—Stores messages that have been sentDrafts—Stores messages created as draftsArchive—Stores messages that you choose to archive, including unread onesTemplates—Stores pictures and prewritten templates. Preloaded templates can be edited and customized.My folders—Allows you to organize your messages by creating custom folders and saving some of your messages here. Select Options > Add folder, Rename folder, or Delete folder to add a custom folder or rename or delete a folder you have created.You can only delete folders created in my folders; the inbox, sent items, archive, and templates folders are protected. When deleting a folder, you are also deleting all messages in the folder.Distribution lists—Stores created distribution lists3. When the folder opens, select the message you want to view.Create distribution listsDistribution lists allow you to send text messages to a designated group of people.1. Select Menu > Messaging > Distribution lists > New list.If you create a second distribution list, select Menu > Messaging > Distribution lists > Options > Create new list.2. Enter a name for the list, and select OK.3. To add a contact to this list, select Add new, and add the contacts one by one.A distribution list only contains phone numbers of recipients.
Messages28Add and remove contactsTo add contacts, select Menu > Messaging > Distribution lists > the list > Add new. Add the contacts one by one.To remove contacts, select Menu > Messaging > Distribution lists > the list > Options > remove contact name.Manage distribution lists1. Select Menu > Messaging > Distribution lists.2. Lists you have created appear in the display. Scroll to the list you wish to modify; select Options and one of the following:Create new list—Create a new distribution list.Rename list—Rename the distribution list.Clear list—Clear the distribution list of all current contacts.Delete list—Delete the distribution list.Delete messagesIf your message memory is full and you have more messages waiting at the network, No space for new messages appears in the standby mode. You can do the following:• Read some of the unread messages, and delete them individually.• Delete messages from some of your folders.Delete a single message1. Select Menu > Messaging > Text messages.2. Select the folder containing the message you want to delete.3. Highlight the message you want to delete. 4. Select Options > Delete.5. Select Yes to delete the message or No to exit.Delete all messages in a folder1. Select Menu > Messaging > Text messages > Delete messages.2. Select the messages you want to delete: All—Deletes all messages in all of the foldersAll read—Deletes any messages that have been read in all of the folders
Messages29All unread—Deletes any messages that have not been read in all of the folders3. Select and mark the folders that have messages you want to delete:Inbox—Deletes all messages from the inbox folderSent items—Deletes all messages from the sent items folderOutbox—Deletes all messages from the outbox folderDrafts—Deletes all messages from the drafts folderArchive—Deletes all messages from the archive folderUser defined folders—Deletes all messages from the user defined folder4. Select Done > Yes to empty the marked folder.Sending optionsTo change sending options for all text messages, select Menu > Messaging > Text messages > Message settings > Sending options and the setting you want to change:Priority > Normal or Urgent —Set the priority of a message.Delivery reports > On or Off—Send a note to yourself confirming delivery of the message.Send callback no.—Send a callback number to the recipient. Select Off or enter your desired phone number to send to the recipient as a callback number, and select OK.Signature—Select On to create a signature to send with text messages or Off to turn this feature off.To change sending options for one message, select Menu > Messaging > Text messages > Create message > Options > Sending options, mark or unmark the setting you want to change:Urgent—Set the priority of the message as urgent.Delivery reports—Send a note to yourself confirming delivery of the message.Callback number—Enter your desired phone number to send to the recipient as a callback number, and select OK.Signature—Create a signature to send with the text message.
Messages30Other settingsSelect Menu > Messaging > Text messages > Message settings > Other settings and the setting you want to change:Save rcvd. text msgs.—Select UIM/ph. if no mem., Phone only, or UIM card only.Message font size > Small font, Normal font, or Large fontMessage overwriting > Sent items only, Inbox only, Sent items & Inbox, or Off Note: When the message memory is full, your phone cannot send or receive any new messages. To free up the memory, you can select Message overwriting to make your phone automatically replace old messages in the inbox and outbox folders when new ones arrive.Save sent messages > Always save, Always prompt, or OffQueue if no digital > On, On prompt, or Off—Messages are stored in the outbox until they can be sent with digital service.Send numeric page■Voice messagesIf you subscribe to voice mail, your network operator will give you a voice mailbox number. You need to save this number to your device to use voice mail. When you receive a voice message, your device beeps, displays a message, or both. If you receive more than one voice message, your device shows the number of voice messages received.Save voice mailbox numberYour network operator may have already saved your voice mailbox number to your device. Select OK to leave the number unchanged.1. Select Menu > Messaging > Voice messages > Voice mailbox no.. The voice mailbox number is displayed.2. If the box is empty, enter the voice mailbox area code and number, and select OK.Set up voice mail1. After you save the voice mailbox number, in the standby mode, press and hold 1.
Messages312. When you connect to voice mail, and the prerecorded greeting begins, follow the automated instructions to setup voice mail.Listen to voice messagesAfter you set up voice mail, in the standby mode, press and hold 1; or select Menu > Messaging > Voice messages > Listen to voice msgs. to dial the voice mailbox number. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Automate voice mailVoice mail services vary by network operator. The following instructions are examples of common operations. Please check with your network operator for specific instructions on using your voice mail service.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should look similar to the following:Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press #.Phone numbers with dialling codesYou can insert special characters called dialling codes into phone numbers such as voice mail, and save the number to a speed dialling location.Dialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. To set up dialling codes, do the following:1. Select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) speed dialling slot, and select Assign.3. Enter your mailbox phone number, including the area code.4. Enter any dialling codes as necessary after the entered phone number.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
Messages325. Enter any remaining pauses or other information that enables you to listen to your messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned speed dialling key in the standby mode.Insert dialing codesPress * repeatedly to cycle through dialling codes. When the desired code appears in the display, pause briefly, and the code is inserted into the dialling string.The following dialling codes are available: *—Bypasses a set of instructionsp—Pauses for 2.5 seconds before sending any numbers that follow+—Replaced by the international access codew—Waits for you to press the call key before sending the numbers or codes that followClear voice mail iconTo clear the voice mail icon from the display, select Menu > Messaging > Voice messages > Clear voice msg. icon.■Web messagingWeb messaging is a network service. See"Network services," p. 6.If your network operator supports this feature, you can use the minibrowser to check for e-mail messages. Select Menu > Messaging > Browser msgs. > Connect.Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.
Log335. LogLog stores information about the last 30 missed, received, or dialed calls. It also displays the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest.When viewing missed, received, or dialed calls, the menu options are the same:Time of call—Display the date and time of the call.Send message—Send a message to the number.Use number—Edit the number and associate a name with the number.Save—Enter a name for the number and save it to your contacts list.Add to contact—Add the number to an existing name in your contacts list, if the number is not associated with a name.Delete—Clear the number from memory.Call—Call the number.■View missed callsMissed calls are calls that were never answered. The missed calls feature does not function when your phone is switched off. 1. Select Menu > Log > Missed calls; select List.2. Scroll to a name or number, select Options, and an option.■View received callsReceived calls are calls that have been answered.1. Select Menu > Log > Received calls.2. Scroll to a name or number, select Options, and an option.■View dialed numbersDialed calls are numbers you have previously dialed from your phone:1. Press the call key; or select Menu > Log > Dialled numbers.2. Scroll to a name or number, and select Options and an option.
Log34■View message recipientsYou can view recipients of messages you have sent. Select Menu > Log > Msg. recipients. ■Clear log listsYou can delete any missed, dialed, or received calls from phone memory.Select Menu > Log > Clear log lists > All call lists, Missed calls, Received calls, Dialled numbers, or Msg. recipients.■Call duration Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.To view the duration of your calls, select Menu > Log > Call duration and one of the following options:Last call—Check the time of your last call.Dialled calls—Check the combined time of calls you dialed for either Home or Roaming.Received calls—Check the combined time of calls you received for either Home or Roaming.All calls—Check the combined time of all calls.Life timer—Check the total airtime minutes logged on your phone.Clear timers—Enter your lock code, and select OK to clear all timers on your phone. Note: Some timers, including the life timer, may be reset during service or software upgrades.■Data or fax callsData/fax calls are a network service. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data and fax calls. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth.
Log35Select Menu > Log > Data/fax calls and one of the following options:Last sent data/fax—View the size (KB) of the last sent data or fax call.Last rcvd. data/fax—View the size (KB) of the last received data or fax call.All sent data/fax—View the size (KB) of all sent data and fax calls.All received data/fax—View the size (KB) of all received data and fax calls.Duration of last call—View the duration time of the last data or fax call.Duration of all calls—View the duration time of all calls.Clear all data/fax logs—Select Yes to clear all data and fax logs.■Duration of minibrowser callsMinibrowser is a network service. See "Network services," p. 6, for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data from the minibrowser. Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes and so forth.Select Menu > Log > Browser calls and one of the following options:Last sent data—View the size (KB) of the last sent browser data.Last received data—View the size (KB) of the last received data.Sent browser data—View the size (KB) of all sent browser data.Rcvd. browser data—View the size (KB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser logs—Select OK > Yes to clear all browser logs.
Contacts366. ContactsThe contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries you can save may vary, depending on the length and total number of entries in the contacts list.■Add new contactsTo access the contacts list in the standby mode, select Menu > Contacts > Names.Save contact name and number1. In the standby mode, enter the phone number you want to save.2. Select Save.3. Enter the name, and select OK. Save contact number only1. In the standby mode, enter the phone number you want to save.2. Select and hold Options. Save an entry1. In the standby mode, select Menu > Contacts > Names > Options > Add new.2. Enter the name, and select OK.3. Enter the phone number, and select OK > Back.Save numbers and text itemsYou can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, or primary number, which you can always change.1. In the standby mode, scroll down to display your contacts list, and highlight the entry to which you want to add a phone number or text item.2. Select Details > Options > Add detail > Number (General, Mobile, Home, Office, or Fax), Tone, E-mail address, Web address, Postal address, Note, or Image.3. Enter the number or text for the type you have selected, and select OK.
Contacts374. To change a number type, highlight the number, and select Options > Change type >General, Mobile, Home, Office, or Fax.Change default numberYou can also change which phone number is the default (primary) number for the contact entry.1. In the standby mode, scroll down to select the contact entry you want to change, and select Details. 2. Scroll to the number you want to set as default, and select Options > Set as default.Caller groupsYou can add contacts list entries to any of five caller groups, and assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic.1. To assign an entry in your contacts list to a caller group, select your desired contact entry, and select Options > Details.2. To manage your caller groups, in the standby mode, select Menu > Contacts > Caller groups > Group details to display the following caller group options:Group name—Rename the group to your preference.Group ringing tone—Set the ringing tone for the group.Group logo> On or Change—Set the graphic for the caller group.Group members—Add or remove members from the caller group.Set up 1-touch dialingYou can associate any entry in the contacts list with a key from 2-9. To dial those entries, press and hold the assigned key. See "Set up 1-touch dialing," p. 37 to activate or deactivate 1-touch dialing.Assign a key to 1-touch dialing1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) slot, and select Assign.3. Enter the number (including the area code) and a name for the number, and select OK; or select Search to retrieve a number from the contacts list.
Contacts38If 1-touch dialing is off, the device displays a prompt and asks if you want to turn speed dialling on.4. Select Yes to activate 1-touch dialing.Change speed dialing numbers1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing entry you want to change, and select Options > Change.3. Enter the new number and a name for the entry, and select OK; or select Search to retrieve a number from the contacts list.Delete 1-touch dialing numbers1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to the entry you want to delete, and select Options > Delete > Yes.■Voice tagsYou can dial up to 25 stored numbers using voice dialing.Before using voice tags, note the following:• Voice tags are not language-dependent. They depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.• Very short names are not accepted. Use long names and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialing in all circumstances.Assign a voice tag to an entryBefore you can use voice dialing, you must first assign a voice tag to the number.1. In the standby mode, scroll to the entry in your contacts list to which you want to assign a voice tag.2. Select Details > Options > Add voice tag > Start.
Contacts393. Speak clearly into the microphone. Do not select Quit unless you want to cancel the recording. The device automatically stops recording, and saves and replays the voice tag. appears next to commands that have voice tags assigned.Dial a number1. In the standby mode, press and hold the right selection key with the fold open, or press and hold the voice key regardless of the fold being open or closed.2. When you hear several beeps and Speak now appears, release the key.3. Pronounce the voice tag clearly into the microphone.When the device finds the voice tag, Found: appears, and the device automatically dials the number. If the device does not locate a number or recognize the voice tag, No match found appears.Voice tags1. After you have associated a voice tag to a contact, select Menu > Contacts > Voice tags and your desired voice tag entry.2. Select Playback, Change, or Delete.■Edit contacts list entries1. In the standby mode, select Menu > Contacts > Names, and scroll to the entry you want to edit in your contacts list.2. Select Details > Options and one of the following options, which may vary depending on whether you are editing a contact listed by phone number or contact name:View—View the phone number of the contact.Add detail—Add more details to the contact: Name (only available with no name added), Number (General, Mobile, Home, Office, or Fax), E-mail address, Web address, Postal address, Note, Image (only available with no image added), or Tone.Edit name, Edit number, Edit detail, or Change image—Edit an existing contact name, phone number, details, or image attached to the contact.Delete—Delete more details (Delete number, Delete detail, or Delete detail) or the entire contact entry (Delete contact) of the contact.
Contacts40Send message—Create and send the contact a text message or multimedia message.Use number—Use or save the number (available when you select a contact listed with a contact name). Select Options to use the number.Set as default—Change the default number of the contact.Change type > General, Mobile, Home, Office, or Fax—Change the number type.Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag assigned, or select Playback, Change, or Delete with a voice tag assigned.Copy number—Copy the number from the phone memory to the UIM card or from the UIM card to the phone memory.Send business card—Send the contact as a business card to another device.Caller groups—Select No group to remove a contact from a caller group or Family, VIP, Friends, Business, or Other to add a contact to an existing caller group.1-touch dialing—Add the contact to your speed dialing list.3. Edit the option to your preference, and select OK.■Delete contacts entriesTo delete all entries in your contacts list, in the standby mode, select Menu > Contacts > Del. all contacts.■Access the contacts menu1. In the standby mode, select Menu > Contacts and one of the following options:Names—View the entries in your contacts list, and select Details or Options > Search, Add new, Delete contact, or Copy for your selected entry.Settings—Change the contacts list view or check the memory status of your device. To set the default memory, select Phone and UIM, Phone, or UIM card.Caller groups—View and edit the properties of any of the caller groups on the device.Voice tags—Listen to, modify, or delete a voice tag to a contact in the contacts list.1-touch dialing—View or modify the list of speed dialling numbers.
Contacts41Del. all contacts—Delete all entries in your contacts list.2. Select an option to activate the feature or access its submenu.Search for a name1. In the standby mode, scroll down to display the contents of your contacts list.2. Press the key corresponding to the first letter of the name for which you are searching.3. Scroll to select a contact, and select Details to view the details.Configure settingsYou can select how the contacts appear in your contacts list and view the amount of memory used or available in your device. In the standby mode, select Menu > Contacts > Settings > Scrolling view to change view of name list or Memory status to view the device memory used and remaining.■Send and receive contactsYou can send and receive an entry in your contacts list using text messaging, if supported by your network operator.Send a business cardYou can send a business card as a text message to a compatible phone or other handheld device.1. Highlight your desired entry from your contacts list, and select DetailsOptions > Send business card > Via text message, Via infrared, orVia Bluetooth. Default number and All details options appear only if you have more than one number or detail saved to the contact entry.2. Enter the number for your recipient, or select Search to retrieve a number from your contacts list.3. Select OK and the business card is sent.
Gallery427. GalleryYou can save pictures, video clips, recordings, and ringing tones to folders in the Gallery and add new folders. You can download images and tones using SMS, mobile Internet sites, or Nokia PC Suite.Your device supports a digital rights management system to protect content you have acquired. Content such as ringing tones, can be protected and associated with certain usage rules, for example, the number of usage times or a certain usage period. Usage rules are defined in the content activation key that can be delivered with the content or delivered separately, depending on your network operator. You may be able to update the activation key. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protection may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.Your device has about 21 MB of memory for storing files in the Gallery. This memory is not shared with other functions, such as contacts. If the device displays a message that the memory is full, delete some existing files before proceeding.■Folders1. Select Menu > Gallery > Memory card > Images, Video clips, ThemesGraphics, Tones, Recordings, Received files, or a folder you created.2. Select Open to view a list of the files in the folder or Options to access the following:Memory card—When a microSD card is in the phone, the card name is displayed as the first option. To rename the mircoSD card, select OpenOptions > Rename mem. card.Delete folder —Delete a folder you have created. You cannot delete a preset folder.Move—Move the selected folder into another folder. After selecting Move, scroll to another folder, and select Move to. You cannot move a preset folder.Rename folder—Rename a folder you have created. You cannot rename a preset folder.
Gallery43Details—Show the name, size, and date of creation of the selected folder.Type of view > List with details, List, or Grid—Determine how to display the folders and files within them.Sort—Sort the contents of the selected folder by name, date, format, or size.Add folder—Create a new folder.Memory status—Check the available memory for the device handset.Activation key list—View the list of available activation keys. You can delete activation keys if desired.Mark or Unmark—Mark or unmark folders to be deleted or moved.Mark all—Mark all folders to be deleted.■Fun frames and clip artIn the gallery, you can select photos and clip art and save them as screen savers and wallpaper. To personalize photos, clip art, screen savers, and wallpaper add your own text, add a frame, change the size of an image, and adjust the contrast.Select Menu > Gallery > Memory card > Images > Options > Edit image > Options > Insert text, Insert frame, Insert clip-art, Insert image, or Crop image.When adding text, you can select the font style, size, and colour, and rotate the font.
Media448. Media■CameraYou can take photos and record video clips with the built-in 2.0 megapixel camera. The camera lens is on the back of the phone. The camera produces pictures in JPEG format and video clips in 3GP format.When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others. Your device supports image capture resolutions of up to 1600 x 1200 pixels. The image resolution in these materials may appear different. If there is not enough memory to take a new photo, delete old photos or other files in the gallery, or move photos to a microSD card. See "MicroSD card," p. 18.Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.Take a photoSelect Menu >Media > Camera. To take a photo, select Capture. Photos are saved in the Images folder of the gallery. To take another photo, select Back; to send the photo, select Send. To view the options, select Options.Record a video clipSelect Menu >Media > Camera > Options > Video. Select Record to begin recording the video clip. Select Pause to pause, Continue to resume, or Stop to stop the recording. Video clips are saved in the Video clips folder of the gallery menu.Camera optionsSelect Menu >Media > Camera > Options and from the following:Still image or Video—Choose Still image to take a picture or Video to record a video.Mute audio or Unmute audio—Turn the sound on or off for the video clip. Night mode on or Night mode off—Switch the camera night mode on and off.Flash on or Flash off—Turn the camera flash on and off.
Media45Self-timer on or Self-timer off—Turn the self-timer on and off with still images.Img. sequence on or Img. sequence off—Turn image sequencing on or off. The pictures are then saved to the gallery. This option only appears in still image mode.View previous—View the previous photo or video taken. This option only appears when a photo has been taken during that session.Open Gallery—Open the Gallery to view saved images, videos, and recordings.Settings—Change the settings for the phone camera.■Media playerWith the media player you can download, view, and play compatible images, audio and video files, and animated images from a variety of sources. The media player enables you to play streaming videos and streaming audio from a network server. Streaming functionality is a network service and requires network support. Check the availability of these services, pricing, and tariffs with your network operator or the service provider whose service you want to use. network operators will also give you instructions on how to use their services.In the standby mode, select Menu > Media > Media player > Online media >  Open Gallery, Go to address, or FF/Rew interval.Online media—Connect to the operator’s network. This is a network service. Check with your network operator for pricing and information.Open Gallery—Open the Gallery. From Gallery, you can play stored audio and video files.Go to address—Connect to a web address.FF/Rew interval—Set the fast forward and rewind interval to 10 seconds, 20 seconds, 30 seconds, or set an interval.■Music playerYour phone includes a music player for listening to music or other tracks in MP3 or AAC format. You can transfer files from a PC to your phone using a USB data cable connection. To transfer music tracks from a compatible PC and manage the music tracks and track lists, see instructions for the application in the Nokia PC Suite online help. See Data cable transfer, p. 61; Infrared connectivity, p. 60; and Bluetooth wireless technology, p. 57 for more information on transferring music tracks to your phone.
Media46Note: Only files protected by DRM can be used as ringtones.Files stored in the Music files folder of the Gallery are automatically detected and added to the default playlist. Music files stored elsewhere, such as a microSD card, must be defined in a track list before listening to them. Listen to sound files through a compatible headset or the phone loudspeaker. Calls can be made or answered while using the music player. During a call, the playback is paused. When the call ends, the music player restarts where it left off.Play music tracksIn the standby mode, select Menu > Media > Music player. If there are no music files in the Music files folder, you can select another folder before entering the Music player. The details of the first track on the default track list are shown. To use the graphical keys,  ,  ,  , or  , on the display, scroll left or right to the desired key, and select it.Play track—To play a track, select  .Adjust volume—To adjust the volume level, use either the volume key or the left and right selection keys.Stop track—To stop the playing, select   or press and hold the end key.Skip tracks—To skip to the beginning of the next track, select  . To skip to the beginning of the previous track, select   twice.Rewind or fast forward—To rewind the current track, select and hold  . To fast forward the current track, select and hold  . Release the key at the position you want.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.Music player optionsSelect Menu > Media > Music player > or other music folder > Options and one of the following options:Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.Play via Bluetooth—Connect to a Bluetooth device to play music.Show tracks—View all the tracks available on a track list. To play a track, highlight the track, and select Play. Select Options > Send to send the music file. Select
Media47Options > Refresh all tracks to refresh the track list (for example, after adding new tracks to the list). Select Options > Change track list to change the track list that is shown when you open the Music player menu, if several track lists are available in the phone. Play options—Select Random to play the tracks on the track list in random order. Select Repeat to play the current track or the entire track list repeatedly. Select Music source > Default folder or Select folder to change the folder currently used by the music player.Media equalizer—The equalizer enhances the sound quality when using a headset (only) with the Music player by amplifying or attenuating frequency bands. There are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.Warning: When using the stereo headset your ability to hear outside sounds may be affected. Do not use the stereo headset where it can endanger your safety.Send—Send music files to a compatible device using infrared or Bluetooth.Memory status—View used and free memory of the phone and memory card. ■RadioWarning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Your phone has an FM radio that also functions as an alarm clock radio. To listen to the FM radio on your phone, connect a compatible music stand, a 2.5 mm headset, or stereo headset. The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly. The quality of a radio broadcast depends on coverage of the radio station in that particular area.Select Menu > Media > Radio. To use the graphical keys,  ,  ,  , or   on the display, scroll left or right to the desired key, and select it. To change the volume, press the volume keys.■Save radio channels1. To start the channel search, select and hold   or  . To change the radio frequency in 0.1 MHz steps, briefly press   or  .
Media482. To save the channel to a memory location 1 to 9, press and hold the corresponding number key. To save a channel to a memory location 10 to 20, briefly press 1 or 2, then press and hold the desired number. 3. Enter the name of the channel, select OK.When an application using a browser connection is sending or receiving data, it may interfere with the radio.When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio switches back on.■Listen to the radioSelect Menu > Media > Radio. To scroll to the desired channel, select   or , or press the headset key. To select a radio channel location, briefly press the corresponding number keys.Select Options and from the following options:Switch off—Turn off the radio.Save station—Enter a name for the channel, and select OK. Select one of 20 locations to save the channel location.Stations—Select from list of current saved channels on your phone. Select Options > Delete station to clear channels or Options > Rename to rename channels.Mono output or Stereo output—Listen to the radio in monaural mode or in stereo (default). Stereo output is available through a stereo enhancement.Headset or Loudspeaker—With the headset attached, listen to the radio through a headset or the loudspeaker.Set frequency—Manually enter the frequency of a known radio station, and select OK. You can also press * to set a frequency.You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.■Voice recorderYou can record pieces of speech, sound, or an active call for up to 3 minutes. The recorder cannot be used when a data call is active.
Media49Record speech or sound1. Select Menu > Media > Voice recorder.2. To start the recording, select the record virtual button. To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping sound about every 2 seconds. When recording a call hold the phone in the normal position near your ear.3. To end the recording, select the stop virtual button. The recording is saved in Gallery > Recordings.4. To listen to the latest recording, select Options > Play last recorded.5. To send the last recording using a multimedia message, Bluetooth technology, or IR, select Options > Send last recorded.■EqualizerThe equalizer enhances the sound quality when using Music player by amplifying or attenuating frequency bands. There are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.Activate an equalizer setSelect Menu > Media > Equalizer, scroll to the desired equalizer setting, and select Activate. Select Options > View to display the equalizer settings.Create a custom equalizer set1. Select Menu > Media > Equalizer.2. Highlight a customizable setting, and select Options > Edit.The selected set appears in the display with the bar on the far left highlighted. The bars adjust frequencies, from the lowest (the far left bar) to the highest (the far right bar). The higher the indicator on a particular bar, the more that frequency is amplified.3. Scroll to adjust the frequencies. Select Save.4. To rename the setting, select Options > Rename, enter a new name, and select OK.5. To activate the setting, select Activate.
Settings509. SettingsUse this menu to change profiles, display settings, themes, tone settings, time and date settings, call settings, phone settings, voice commands, connectivity settings, enhancement settings, security settings, application settings, network settings, network services, restore factory settings, and phone details.■ProfilesProfiles define how your device reacts when you receive a call or message and how your keypad sounds when you press a key. You can leave ringing options, keypad tones, and other settings for each of the available profiles at their default setting, or customize them to suit your needs.Profiles are also available for enhancements such as the headset and car kit. See "Enhancements," p. 66.To activate a profile, select Menu > Settings > Profiles > General, Silent, Meeting, Outdoor, (My profile 1), or (My profile 2) > Activate.Personalize a profileYou can personalize any of the profiles in various ways.1. Select Menu > Settings > Profiles.2. Select the profile you want to personalize.3. Select Personalize and the option you want to personalize.Set a timed profileYou can use timed profiles to prevent missed calls. For example, suppose you attend an event requiring your device set to Silent before the event starts, but you forget to return it to General until long after the event. A timed profile can prevent missed calls by returning your device to the default profile at a time you specify. You can set timed profiles up to 24 hours in advance.1. Select Menu > Settings > Profiles.2. Select the profile you want to activate and Timed for timed expiration.3. Enter the time in hh:mm format for the profile to expire, and select OK.
Settings51■DisplayStandby mode settingsYou can choose settings for the display of the standby screen on the display.WallpaperSelect Menu > Settings > Display > Standby mode settings > Wallpaper and one of the following:On—Activate wallpaper on your phone.Off—Deactivate wallpaper on your phone.Image—Choose an image from the gallery for wallpaper. Select Open to browse the Images folder. Select the image of your choice.Slide set—Choose a slide set from the gallery for wallpaper. Select Open to browse the Images folder. Select the slide set of your choice.Font colourTo set the font colour of your phone when in the standby mode, select Menu > Settings > Display  > Standby mode settings > Standby font colour. Scroll to select a colour from the colour grid.Screen saverTo choose a screen saver for the main display, select Menu > Settings > Display > Screen saver and one of the following:On—Activate the screen saver on your phone.Off—Deactivate the screen saver on your phone.Screen savers  > Image, Video Clip, Slide set, Digital clock, or Open Camera— an image, video clip, or other option to act as your screen saver.Time-out—Modify the idle time before the screen saver activates.Power saver is automatically activated after the time-out of the screen saver to optimize battery life.Sleep modeThe sleep mode is a power-saving feature that turns the phone display off during inactivity. Select Menu > Settings > Display > Sleep mode. When sleep mode is
Settings52activated, the display is completely blank, but the phone is still active. Press any key to restore the display.Backlight time-outTo control the time-out of the backlight on your phone, select Menu > Settings > Display > Backlight time-out.■ThemesA theme contains many elements for personalizing your phone, such as wallpaper, screen saver, colour scheme, and a ringing tone. Themes automatically loads wallpapers, screen savers, ringing tones and background colours. Selecting a theme over-writes previous settings. Individual settings for a theme can be overwritten independently in the settings menu. For example, a theme selects a wallpaper, a screen saver, and a default ringing tone. The default ringing tone within a theme can be overwritten. See "Tone settings," p. 52.1. Your phone has a default theme. To choose the theme on your display, select Menu > Settings > Themes > Select theme > Themes.2.  Scroll to a theme, and select OpenApply theme.■Tone settingsYou can adjust the ringing volume, keypad tones, and more for the active profile. See "Personalize a profile," p. 50 for more information on profile settings. Select Menu > Settings > Tones and one of the following: Incoming call alert—Select how the device notifies you of an incoming call.Ringing tone—Select the ringing tone for incoming calls.Incoming call video > Incoming call video off or Incoming call video on—Indicate whether to replace the default audio ringing tone with the selected video.Ringing volume—Set the volume of your ringing tone.Vibrating alert > On or Off—Set the vibrating alert.Message alert tone—Select the tone for received messages.Keypad tones—Set the volume of your keypad tones (or turn them off).Warning tones > On or Off—Set warning and confirmation tones.
Settings53Alert for—Define which caller groups the selected profile will accept or decline. See "Caller groups," p. 37.■Time and date settingsClockSelect Menu > Settings > Time and date > Clock > Show clock, or Hide clock, Set the time, Time zone or Time format.DateSelect Menu > Settings > Time and date > Date > Show date or Hide date, Set the date, Date format, or Date separator.Date and time auto-updateAuto-update is a network service. See "Network services," p. 6. If your network operator supports this feature, you can allow the digital network to set the clock, which is useful when you travel to another network or time zone.Select Menu > Settings > Time and date > Auto-update of time > On, Confirm first, or Off.If you use the Auto-update of time option while outside the digital network, you may be prompted to enter the time manually. Network time replaces the time and date when you reenter your digital network.If your battery has been removed or has discharged outside the digital network, you may be prompted to enter the time manually (when the battery is replaced or recharged, and you are still outside of the digital network).■Call settingsLocation info sharingLocation info sharing is available for the Nokia 6275i device. Location info sharing is a network service. See "Network services," p. 6.If your wireless service provider supports this feature, then location info sharing allows the device to share position information over the network. For calls to emergency numbers, this position information may be used by the emergency operator to determine the position of the device. The functionality and accuracy of this feature are dependent on the network, satellite systems, and the agency
Settings54receiving the information. This feature may not function in all areas or at all times. In the standby mode, select Menu > Settings > Call > Location info sharing > Emergency or On. Emergency—This is the default profile. The device location information is shared only during an emergency call to the official emergency number programmed into your device. The screen displays   in the upper left hand corner in the standby mode. On—The device location information is shared with the network whenever the device is powered on and activated. The screen displays   in the upper left hand corner in the standby mode.Location information will always be shared with the network during emergency calls to the official emergency number programmed into the device, regardless of which setting is selected. After placing an emergency call the device remains in emergency mode for 5 minutes. During this time, the location information will be shared with the network. See "Emergency calls," p. 97.Anykey answerAnykey answer enables you to answer an incoming call. Briefly press any key except the right selection or end key. In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your device redials the number (number of times is specified by the network), and notifies you when the network is available. In the standby mode, select Menu > Settings > Call > Automatic redial > On or Off.1-touch dialingYou can activate or deactivate 1-touch dialing. In the standby mode, select Menu > Settings > Call > 1-touch dialing > On or Off.
Settings55Automatic service updateYour device is capable of receiving updates to wireless services sent to your device by your network operator. In the standby mode, select Menu > Settings > Call > Auto-service update > On or Off.Calling cardsIf you use a calling card for long distance calls, save the calling card number in your phone. The phone can store up to four calling cards. Contact your calling card company for more information.Save information1. In the standby mode, select Menu > Settings > Call > Calling card.2. Enter your security code, and select OK. See "Security," p. 66.3. Scroll to the calling card of your choice, and select Options > Edit > Select > Dialling Sequence.4. Select one of the following sequence types:Access+phone+card—Dial the access number for the calling card, the phone number, then enter the card number (plus PIN if required).Access+card+phone—Dial the access number for the calling card, card number (plus PIN if required), then enter the phone number.Prefix+phone+card—Dial the prefix (numbers that must precede the phone number) and phone number, then enter the card number (plus PIN if required).5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.6. Select Card name > enter the card name > OK.Select a calling cardYou can select one of the calling cards for which you have saved information. The selected card information is used when you make a card call.1. In the standby mode, select Menu > Settings > Call > Calling card.2. Enter your security code, and select OK. See "Security settings,"p. 80.3. Scroll to the calling card of your choice, and select it.
Settings56Make card callsAfter you have selected a calling card, make a card call.1. Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.2. Press and hold the send key for a few seconds until Card call is displayed.3. Follow the instructions on the screen.4. When you hear the tone or system message, select OK.International prefixYou can store an international dialling prefix into your device. In the standby mode, select Menu > Settings > Call > International prefix. In the standby mode, when you enter + (press * twice) at the beginning of a phone number, your device automatically inserts the international dialling prefix that you have stored after you press the call key. See "Insert dialing codes," p. 32.Data or fax callsData and fax calling is a network service. See "Network services," p. 6. If your network operator supports this feature, you can set up the device to send or receive data and fax calls with a terminal, such as a PDA or PC, connected.For better performance during data calls, place the device on a stationary surface. Do not move the device or hold it in your hand during a data call.For more information on connectivity, refer to the PC/PDA Connectivity Guide which can be downloaded from the Nokia website at http://www.nokia.com/us.1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Rcvd. data/fax call and one of the following options:Normal—The device receives incoming calls as usual.Data calls only—The device receives only data calls.Fax calls only—The device receives only fax calls.2. When finished with receiving the fax or data call, repeat steps 1 and 2, and select Normal.
Settings57Data transferTo view the transmission speed when sending or receiving data and fax calls. In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate display > Graphic or Off.Call summaryYour device can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call > Call summary > On or Off.Show call timeTo see the call time on the display screen after each call, select Menu > Settings > Call > Show call time displ. > On or Off. Ringing tone for no caller IDYou can select a different ringing tone for calls received with no caller ID. In the standby mode, select Menu > Settings > Call > Ringtone no caller ID > On or Off.■Phone settingsLanguage settingsThe phone language affects the time and date formats of the clock, and alarm clock. In the standby mode, select Menu > Settings > Phone > Phone language and the language of your choice.The writing language selects the language used for messaging, calendar, notes, and To-do lists. In the standby mode, select Menu > Settings > Phone > Writing language and the language of your choice.Automatic keyguardYou can set the keypad of your device to lock automatically after a preset time delay.1. In the standby mode, select Menu > Settings > Phone > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed.3. Enter the delay time (in mm:ss format), and select OK.When keyguard is on, it may be possible to dial the emergency number programmed into your device.
Settings58Navigation keyIf supported by your wireless service provider, you can set the features that are activated when you press the scroll key.1. In the standby mode, select Menu > Settings > Phone > Navigation key.2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select Change.3. Select a function to assign to the action.Memory statusYou can view the size of memory available on your device. In the standby mode, select Menu > Settings > Phone > Memory status.You can view the size of memory available for application installations. In the standby mode, select Menu > Extras > Memory.DTMF tonesDTMF tones, are the tones that sound when you press the keys on your device keypad. You can use DTMF tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. DTMF tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device.Set typeIn the standby mode, select Menu > Settings > Phone > DTMF tones > Manual DTMF tones and one of the following options:Continuous—Used to set the tone sound for as long as you press and hold a key.Fixed—Used to send tones of the duration you specify in the DTMF tone length option.Off—Used to turn off tones. No tones are sent when you press a key.Set length You can specify touch-tone length for the Fixed option. In the standby mode, select Menu > Settings > Phone > DTMF tones > DTMF tone length > Short (95 ms) or Long (350 ms).
Settings59Start-up toneYou can select to have a start-up tone when you first turn on your device. In the standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.Help text activationYour device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 14 seconds, and wait for the help text to be displayed. If necessary, use the scroll key to page through the full help text.The default setting for help text is On. However, you can turn help text on or off. In the standby mode, select Menu > Settings > Phone > Help text activation.■Voice commands and voice tagsBefore using voice tags, note the following:• Voice tags are not language-dependent, but depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.• Very short names are not accepted. Use long names, and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances.Hands-free operationYou can set as many as 16 voice commands to enable hands-free operation of certain features in your device. Assign a voice tag to a commandBefore using voice commands, you must first add a voice tag to the device function. 1. Select Menu > Settings > Voice commands.2. Select the device function you want to tag: Profiles, Messages, Infrared, Voice recorder, or Log.3. If necessary, select an option associated with that function.4. Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.
Settings60The device replays and saves the recorded tag.   appears next to commands with assigned voice tags.Activate a voice commandAfter you have associated a voice tag with a function in your device, to issue a command, speak the voice tag.1. In the standby mode, press and hold the right selection key or voice key.2. With Speak now displayed, pronounce the voice tag clearly into the microphone. With the voice tag found, the device displays Found:, and plays the recognized voice tag through the earpiece. The function you requested is activated.OptionsAfter you have associated a voice tag to a command, you can select one of the following options:Play—Press the center selection key to listen to the voice command tag.Change—Select Options > Change to change the voice command.Delete—Select Options > Delete to erase the voice command tag.■ConnectivityYou can connect the phone to a compatible devices using infrared (IR) connection, or Bluetooth wireless technology. You can also connect the phone to a compatible PC using IR or a USB data cable; and use the phone as a modem to enable connectivity from the PC.For more information, see the Nokia PC Suite online help. Nokia PC Suite and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokiausa.com/pcsuite.Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Bluetooth connectivityBluetooth technology connectivity enables cost-free wireless connections between electronic devices and can be used to send and receive images, texts, gallery files, voice recordings, videos, notes, business cards, and calendar notes. It can also be used to connect wirelessly to products that use Bluetooth wireless
Settings61technology, such as computers. You can synchronize your phone and your PC using Bluetooth connectivity.Since devices with Bluetooth connectivity communicate using radio waves, your phone and the other device do not need to be in direct line-of-sight.The two devices only need to be within a maximum of 30 feet (10 meters) of each other. The connection can be subject to interference from obstructions such as walls or other electronic devices. The Bluetooth wireless technology application whether used actively or in the background, consumes the battery and reduces the operating time of the phone.This device is compliant with Bluetooth Specification 2.0 and supports the following profiles:• Object push profile (OPP)• File transfer profile (FTP)• Dial-up networking profile (DUN)• Generic object exchange profile (GOEP)• Headset profile (HSP)• Hands-free profile v. 1.0 (HFP)• Generic access profile (GAP)• Service Discovery Protocol (SDP)• Serial port profile (SPP)To ensure interoperability between other devices supporting Bluetooth technology, use only enhancements approved by Nokia for this model. Check with the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. If you want more information on this function, visit the Bluetooth Technology organization website: https://www.bluetooth.org/.PairingYou can set up a permanent association (pairing) between your phone and another device with Bluetooth technology. Some devices may require pairing before data transfer can take place.
Settings62To pair with a device, you and the owner of the other device must agree on a pass code of 1–16 numeric characters. The first time you try to connect the devices, you must each enter the same pass code. Once the devices are paired, you will not need to use the pass code again, so there is no need to remember it.Paired devices are placed in your paired device list. You can view the list even when Bluetooth connectivity is not active or when the devices in the list are not available for connection.Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options and one of the following:Assign short name—Give a nickname to the selected device (visible to you only).Auto-conn. without confirmation—Select No if you want the phone to connect to the selected device automatically or Yes if you want the phone to ask for your permission first.Delete pairing—Delete the pairing to the selected device.Pair new device—Search for active devices with Bluetooth technology within range, scroll to the desired device, and select Pair to establish pairing with that device. Do not accept Bluetooth connectivity from sources you do not trust.Bluetooth connectivity settingsTo define how your phone is shown to other devices with Bluetooth connectivity. Select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings and one of the following:My phone's visibility—Select Perm. visibil. to permanently show the phone to all other devices with Bluetooth connectivity, Temp. visibil. to show the phone to all other devices for two minutes only, or Hidden to show the phone only to the paired devices. Operating the phone in hidden mode is a safer way to avoid malicious software.My phone's name—Change your phone name that is seen by other users.Set up a connection1. Select Menu > Settings > Connectivity > Bluetooth > On. The active Bluetooth technology connection is indicated by   at the top of the display.2. Select Search for audio enhancements to search for compatible devices with Bluetooth connectivity. The list of found devices appears in the display.3. Select the desired device. If required, enter the Bluetooth connectivity pass code of the device to complete the pairing.
Settings634. If required, enter the Bluetooth connectivity pass code of the device to pair with the device.Your phone connects to the device. You can start data transfer.To view the device you are connected to, select Menu > Settings > Connectivity > Bluetooth > Active device.To deactivate Bluetooth connectivity, select Menu > Settings > Connectivity > Bluetooth > Off. Deactivation of the Bluetooth technology connection will not affect other functions of the phone.Send dataInstead of using the Connectivity menu, you can use other phone menus to send various types of data to other devices with Bluetooth connectivity. For example, you can send a video from the Video clip folder of the Gallery menu. See the appropriate sections of the user guide for information about sending different types of data.Receive a data transferWhen a Bluetooth technology connection is active in your phone, you can receive notes, business cards, videos, and other types of data transfers from another device with Bluetooth connectivity. When you receive a data transfer, an alarm sounds, and a message appears on the screen. To view the transferred item immediately from the standby mode, select Show. To view the item at a later time, select Exit.Depending on the nature of the item, it is saved in the appropriate menu in your phone. For example, a business card is saved in Contacts, and a calendar note is saved in Calendar.Infrared connectivityYou can set up the phone to receive data through its infrared (IR) port. To use an IR connection, the device with which you want to establish a connection must be IrDA compliant. You can send or receive data to or from a compatible phone or data device (for example, a computer) through the IR port of your phone.Warning: Do not point the IR beam at anyone’s eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.
Settings64To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared. When the phone displays Deactivate infrared?, select Yes.If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be started again.IR connection indicatorWhen   is shown continuously, the IR connection is activated and your phone is ready to send or receive data through its IR port. When   blinks, your phone is trying to connect to the other device or a connection has been lost.Data cable transferYou can transfer data from your phone to a compatible PC or from a compatible PC to your phone using a CA-53 USB data cable.Important: Disconnect the USB data cable from the phone to make a call.Enable default mode connectionConnect to your PC in Nokia mode to transfer phone data and files between your phone and PC using Nokia PC Suite.1. Connect your PC and your phone with a CA-53 USB data cable. A notification appears on the display that asking which mode you want to select.2. Select Accept > Nokia mode. A notification appears on the display stating a connection is active.You can now use PC Suite to connect to your phone.Enable data storage connectionConnect to your PC in Data storage mode to transfer music, photo, and video files to the phone microSD card, and from the phone microSD to your PC with Windows Explorer.1. Connect your PC and your phone with a CA-53 USB data cable. A notification appears on the display that asking which mode you want to select.2. Select Accept > Data storage. USB mode: Data storage is displayed while the phone is in data transfer mode.3. Open Windows Explorer. Your phone microSD card will appear as a local drive (the device name), and with a drive letter assigned to it.
Settings654. Click on the folders to display a window that shows the contents of the folder on the phone microSD card.5. Open a second instance of Windows Explorer and display the contents of the folder on your PC where you have MP3 files, photo files, or video files stored.6. Select the files on your PC that you wish to transfer to the phone.7. Drag and drop the files from the second window into the first window and place in a folder. 8. The files are transferred to the phone and can be played by the Music player or accessed by the Media player.If you selected a file or files that require more memory than can fit on the available phone memory, you will get an error note. Deselect some of your selected files until the required memory is less than or equal to the available memory on your phone.Disable data storage connection1. To disable the USB data cable, double-click the green arrow on the task bar at the bottom of your PC screen. A window pops up that displays Unplug or Eject Hardware. 2. Click on USB Device in the Hardware devices window. A popup window displays Stop a Hardware device.3. Highlight USB device, and click OK.The popup window, Safe to Remove Hardware, is displayed with The ‘USB Device’ device can now be safely removed from the system.4. Click OK.Important: To ensure that all memory card operations are completed in a controlled way, do not unplug the connectivity cable until Windows notifies you that it is safe to do so. Uncontrolled completion or unexpected disruptions of the memory card operations may cause the memory card and the information stored on it to become corrupted. A corrupted memory card may have to be formatted before it can be used again. When a memory card is formatted, all information on the card is permanently los
Settings66■EnhancementsSelect Menu > Settings > Enhancements. You can select an enhancement menu if the phone is or has been connected to a compatible enhancement type. Depending on enhancement, select from the following options:Default profile—Choose the profile you wish to be automatically activated when a headset, car kit, or loopset is connected.Automatic answer—Answer calls automatically after one ring when a headset, car kit, loopset, or charger is connected. Select On or Off.Lights (for Handsfree or Charger only)—Choose to keep the phone lights always on, or to shut off automatically after several seconds. Select On or Automatic.If the Loopset is connected and recognized through the Pop-Port™ connector, the phone automatically uses the Loopset.Text phone (network service)—Connect to a TTY/TDD device. Check with the manufacturer of the TTY/TDD device for a connecting cable that is compatible with your phone. Check with your service provider for availability and description of services.■SecurityPIN codeThe PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits in length. After three successive incorrect entries, the PIN code is blocked. You need to enter the personal unblocking key (PUK) code. See"Personal unblocking key (PUK) code," p. 69.Note: The PIN code must be obtained form your wireless service provider. The PIN code is typically provided with your UIM card.PIN code requestTo provide extra security in case your phone is lost or stolen, enable your phone to request the PIN code when powered on.1. In the standby mode, select Menu > Settings > Security > PIN code request.2. Enter the PIN code, and select OK.3. Select On.
Settings67Call restrictionsSelect call restrictions to block or allow numbers for incoming and outgoing calls. With any numbers entered as allowed numbers, all those entered as blocked numbers are ignored. With a number blocked, the phone blocks any call from it, and send the caller to the voice mail.1. In the standby mode, select Menu > Settings > Security > Call restrictions. 2. Enter the security code, and select OK. See "Security," p. 66.3. Select the types of calls you want to restrict:Restrict sent calls—Set restrictions on making calls.Restrict rcvd. calls—Set restrictions on receiving calls.4. Select whether to block or allow numbers:Blocked numbers—Set the numbers the phone can only block, allowing all the rest.Allowed numbers—Set the numbers the phone can only call or receive, blocking all the rest. 5. Select one of these options: Select, Add restriction (unavailable with memory full), Edit (unavailable with no number added), or Delete (unavailable with no number added).Note: With restricted calls, you may still call the official emergency number programmed into your device.Security levelYour device can be set to different security levels to control device use and memory settings. In the standby mode, select Menu > Settings > Security > Security level. Enter your security code, and select OK and one of the following options:None—Disable security level protection.Memory—Enable or disable memory protection.Phone—Enable or disable phone protection.
Settings68Access codesYou can change your security code and PIN code. Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialling of the emergency number.Change security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345. When you change the security code, keep the new code secret and in a safe place, separate from your phoneIf you enter the wrong security code five times in succession, you will not be able to enter a code for 5 minutes, even if you power off the phone between incorrect entries.1. In the standby mode, select Menu > Settings > Security > Access codes > Change security code.2. Enter the current security code (default is 12345), and select OK.3. Enter the new security code (up to 10 characters), and select OK.4. Enter the new security code again, and select OK.Change PIN codeBefore you can change your PIN code, you must enable PIN code request. See "PIN code request," p. 66.1. In the standby mode, select Menu > Settings > Security > Access codes > Change PIN code.2. Enter the current PIN code, and select OK.3. Enter the new PIN code, and select OK.4. Enter the new PIN code again, and select OK.Voice privacyVoice privacy is a network service. See "Network services," p. 6. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network. In the standby mode, select Menu > Settings > Security > Voice privacy > On or Off.
Settings69Personal unblocking key (PUK) codeThe PUK code is used to restore a blocked PIN code. The PUK code is 8 characters in length and cannot be changed. The PUK code must be obtained from your wireless service provider. Important: If you enter an incorrect PUK code 10 times in succession, the UIM card is rejected and can no longer be used. You must contact your wireless service provider for a new UIM card.■Application settingsTo change game and application settings, select Menu > Settings > App. settings and one of the following:Application sounds > On —Play sounds during an application.Application lights > Application defined or Default—Play lights during an application.Application vibration > On—Vibrate the phone during an application.Use of vibration can aggravate injuries. Do not turn vibration on if you have any ailment in the bones or joints of your fingers, hands, wrist, or arms.■NetworkThe menu options in your device depend on your network operator’s network. Check with your network operator for more information.The Network menu enables you to customize the way your device chooses a network in which to operate while you are within or outside of your primary or home system. Your device is set to search for the most cost-effective network. If your device cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu.Select Menu > Settings > Network > Set mode > Home only, Automatic A, or Automatic B.■Network servicesTo activate network services in your phone, select Menu > Settings > Network services and from the following options:Network feature sett.—Activate network services in your phone using feature codes received from your network operator.
Settings70■Restore factory settingsTo reset some of the menu settings to their original values, select Menu > Settings > Rest. factory sett.. Enter the security or lock code, and select OK. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected).Note: Depending on your wireless service provider, your device may request the security code (defaulted to 12345) instead of the lock code.■Phone detailsTo view the current details of your phone, select Menu > Settings > Phone details and one of the following options:User details—Show current number details.Version details—Show the hardware, software, and browser version information for the phone.System details—Show the digital network the phone is on.Icon details—Show the icons used.
Organizer7110. OrganizerYour phone contains features to help organize your everyday life, including an alarm clock, calendar, calculator, countdown timer, and stopwatch.■Alarm clockSet an alarmThe alarm clock is based on the phone clock. An alarm sounds at the time you specify, even if the phone is turned off.1. Select Menu > Organizer > Alarm clock > Alarm time.2. Enter the time for the alarm in hh:mm format, and select OK. 3. Select am or pm if 12-hour clock format is on.Alarm on appears briefly in the display, and   appears in the standby mode.If you need to reset the alarm, select Menu > Organizer > Alarm clock > Alarm time > On.To turn off the alarm, select Menu > Organizer > Alarm clock > Alarm time > Off.Repeat alarmYou can set the alarm to repeat every day or only on certain days of the week.1. Select Menu > Organizer > Alarm clock > Repeat alarm > On.2. Check the day or days of the week you wish to repeat the alarm, and select Mark. Select Unmark to remove a day.3. Select Done when you have added all desired days.If you need to revise the days for a repeated alarm, select Menu > Organizer > Alarm clock > Repeat alarm > Repetition days.If you need to stop a repeated alarm, select Menu > Organizer > Alarm clock > Repeat alarm > Off.Set the alarm toneTo set which tone to play when the alarm sounds, select Menu > Organizer > Alarm clock > Alarm tone > Standard, Radio, or Open Gallery.
Organizer72If you set your alarm to Radio, use an accessory that supports FM stereo.Set the snooze time-outYou can set the Snooze time-out for the alarm.Select Menu > Organizer > Alarm clock > Snooze time-out and a snooze time.When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the currently active profile), and lights up.With the device on, select Stop to shut the alarm off or Snooze to interrupt the alarm for 10 minutes. Snooze on appears in the display.If you do not press a key, the alarm stops for the snooze time-out period, then sounds again.If you select Stop, the device asks whether you want to activate the phone for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.■CalendarThe calendar keeps track of reminders, calls you need to make, meetings, memo, and birthdays. It can even sound an alarm for any of these events.The default monthly view provides an overview of the selected month and weeks. You can also jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder. A short summary of notes for the day appear at the bottom of the screen.Open calendarSelect Menu > Organizer > Calendar.Scroll to move the cursor in the calendar view.Calendar optionsSelect Menu > Organizer > Calendar > Options and one of the following:Week view—View your calendar by weeks. To return to month view select Back while in the Week view.Make a note—Create a note on the selected date.Go to date—Jump to a specific date. Enter the date (for example, 15/07/2005), and select OK.
Organizer73Go to today—Jump to the current date.Settings—Modify the calendar settings.Go to to-do list—Go directly to your to-do list.Delete all notes—Delete all calendar notes. This option appears only if a calendar note has been created.Make a calendar noteYou can make a calendar note for a specific date. You can choose from five types of notes. Your phone asks for further information depending on which note you select. You can also set an alarm for your note.1. Select Menu > Organizer > Calendar.2. Scroll to the date for which you want to make a note. Scroll or select Options > Go to date, and select a date.3. Select Options > Make a note and one of the followingMeeting—Enter the subject, and select Save. Enter a location, and select Save. Enter a start and end time. Select an alarm option.Call—Enter the phone number, and select Save. Enter a name, and select Save. Enter a time. Select an alarm option. You can also select Options > Search to search your contacts.Birthday—Enter the person’s name, and select Save. Enter the year of birth. Select an alarm option.Memo—Enter the subject, and select Save. Enter a start and end date. Select an alarm option.Reminder—Enter the reminder, and select Save. Select an alarm option.View calendar notes (day view)You can view the calendar notes for a day.1. Select Menu > Organizer > Calendar.2. Scroll to the date you want to view or select Options > Go to date. Days with notes appear in bold type.3. Select View to see the list of notes for that day.
Organizer74To view a specific note, scroll to the note, and select View again. If there are no notes for that date, select Add note to create a new calendar note.Options while viewing a dayWhen viewing the list of notes for a day, you can scroll to a note, select Options and one of the following:Make a note—Create a new note for the selected date.Delete—Delete the note.Edit—Edit the note.Use detail—Use a detail contained in the note.Move—Move the note to another date on your calendar.Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly). Repeat is not available for Birthday note.Go to date—Jump to another date on your calendar.Go to today—Return to the current date.Send note > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send a calendar note in calendar format (vCal), in a text message, in a multimedia message, or directly to another device.Copy—Copy the note. You can paste the note to another date.Settings—Modify the calendar settings.Go to to-do list—Go directly to your to-do list.Receive a calendar noteWhen you receive a calendar note in calendar-to-calendar format (vCal), your phone displays Calendar note received.Select Show to view the calendar note. Select Save to save the note to your calendar or Options > Discard to discard the note.Modify calendar settingsSelect Menu > Organizer > Calendar > Options > Settings and one of the following:Set the date—Enter the current date, and select OK. Appears only when the date has not yet been set.
Organizer75Set the time—Enter the current time, and select OK. Appears only when the time has not yet been set.Time zone—Select your current time zone.Date format—Select your preferred date format.Date separator—Select your preferred date separator.Time format—Select your preferred time format.Default view—Select a monthly or weekly view.Week starts—Select the day the week starts.Auto-delete notes—Select when to delete past notes.■NotesYou can write text notes with the Notes. You can also send notes using text messaging, infrared, or Bluetooth connectivity.Select Menu > Organizer > Notes to see your current list of notes. If there are no notes, select Add to create a note. If there are existing notes, scroll to a note, and select View. Create your note, and select Save.To write additional notes, select Menu > Organizer > Notes > Options > Make a note. Create your note, select any note options, and select Save.When you create a note, the following options are available:Insert time & date—Adds the time and date to your note.Close—Returns you to the notes list.Insert smiley—Inserts a smiley into your message.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This option is displayed only when predictive text is on.Insert symbol—Inserts a special character into your message. Option only appears when predictive text is on.Writing language—Choose the language you want to use.Prediction on or Prediction off—Turn predictive text on or off.Matches—View matches found in the predictive text dictionary for the word you want to use. This option is displayed only when predictive text is on.
Organizer76Send a noteSelect Menu > Organizer > Notes, scroll to the note you wish to send, and select Options > Send note > Send as message, Via infrared, or Via Bluetooth to send the note in a text message, in a multimedia message, or directly to another device.Notes optionsSelect Menu > Organizer > Notes > Options and one of the following:Make a note—Create a new note.Delete—Delete the note you selected.Edit—Edit the note you selected.Use detail—Use a detail contained in the note.Send note > Send as message, Via infrared, or Via Bluetooth—Send a note in a text message, in a multimedia message, or directly to another device.Delete all notes—Delete all notes.The note options appear only when you have created one or more notes.■To-do listUse the To-do list feature to keep track of your tasks. You can save a task or errand as a to-do list note, select a priority level for the to-do list note, and mark it as done when you have completed it. You can sort the to-do list notes by priority or by date. Select Menu > Organizer > To-do list. The current to-do list is displayed.If there are no to-do tasks, select Add to create your first to-do list note. If there are existing to-do list notes, scroll to a to-do list note, and select View.Select Menu > Organizer > To-do list > Options > Add. Enter the subject, and select Save > High, Medium, or Low.To write additional notes, select Menu > Organizer > To-do list > Options > Add. Enter the subject, and select Save > High, Medium, or Low.When you create a to-do list note, the following options are available:Search—Search for existing notes.Insert smiley—Insert a smiley into your message.
Organizer77Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary. These options are displayed only when predictive text is on.Insert symbol—Insert a special character into your message. Insert symbol is displayed only when predictive text is on.Writing language—Choose the language you want to use.Prediction on or Prediction off—Turn predictive text on or off.Matches—View matches found in the predictive text dictionary for the word you want to use. This option is displayed only when predictive text is on.To edit the notes, select Menu > Organizer > To-do list > View > Edit. Edit the subject, select Save.To view to-do list notes, select Menu > Organizer > To-do list > View > Options, and one of the following choices:Deadline—Change the deadline of the to-do list note.Mark note as done or Mark as not done—Indicate whether the to-do list note is completed or not.Delete—Delete the to-do list note.Use detail—Use a detail contained in the note.Edit priority—Change the priority to High, Medium, or Low.Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the to-do list note.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do list note to your calendar.Send a to-do list noteTo send the to-do list note in calendar format (vCal), in a text message, in a multimedia message, or directly to another device, select Menu > Organizer > To-do list, scroll to the note you wish to send, and select Options > Send > Send as message, Via calendar, Via infrared, or Via Bluetooth. To-do list optionsSelect Menu > Organizer > To-do list > Options and one of the following:Add—Create a new to-do list note.Delete—Delete the to-do list note you selected.
Organizer78Mark note as done or Mark as not done—Indicate whether the to-do list note is completed or not.Use detail—Use a detail contained in the note.Sort by deadline or Sort by priority—Sort the to-do list by either date or priority.Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the to-do list note in calendar format (vCal) in a text message, in a multimedia message, or directly to another device.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do list note you selected to your calendar.Delete done notes—Delete the to-do list note you selected from your calendar.Delete all notes—Delete all the to-do list notes.The to-do list options appear only when you have created one or more notes.■CalculatorThe calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.Note: This calculator has a limited accuracy and is designed for simple calculations. To use the calculator. do the following:1. Select Menu > Organizer > Calculator.2. Enter the first number in the calculation.Press # for a decimal point if necessary.Press the scroll key up or down to change the sign of your number or value.Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character.3. Enter the second number in your calculation.4. Select Equals. To perform a square or square root calculation, select Options > Square or Square root.
Organizer79■Currency converterYou can convert foreign currency to domestic, or vice versa, directly from the standby mode or from the Calculator menu.Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero.1. Select Menu > Organizer > Calculator > Options > Exchange rate > Foreign units in home units or Home units in foreign units.Foreign units in home units—The number of home units it takes to make one unit of foreign currency.Home units in foreign units—The number of foreign units it takes to make one unit of your home currency.2. Enter the exchange rate (press # to insert a decimal), and select OK.3. Select Back to return to the Calculator screen, and enter the currency amount to convert.4. Select Options > To home or To foreign.To home—Converts foreign currency to domestic currency.To foreign—Converts domestic currency to foreign currency.5. If you have not already entered an exchange rate, the device prompts you to enter it. Select OK. You can edit the exchange rate at any time.■TimersYour device contains two event timers: a normal timer that counts down a set interval, and an interval timer that counts up set intervals.The timers only work when the phone is on. Once you turn off your phone, the timers are no longer active.Normal timer This countdown timer enables you to enter a specific duration (up to 99 hours, 59 minutes, and 59 seconds). When the time runs out, your device sounds an alarm.To set the normal timer, do the following:1. Select Menu > Organizer > Timer > Normal timer.
Organizer802. Enter the time (in hh:mm:ss format), and select OK.3. Enter a note for the timer, and select Start. and the timer (in hh:mm:ss format) appear in the standby mode when the countdown timer is running.When the time runs out, your phone sounds an alarm, vibrates, and flashes its lights. If you are in standby mode, select Restart or Exit. If you are not in the standby mode, press any key during the alarm to stop the timer. After 60 seconds the timer alert expires automatically. Select Exit or press the end key to clear the timer note.To change the time: 1. Select Menu > Organizer > Timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was, or enter a new note, and select Start. To stop the timer before the alarm sounds, select Menu > Organizer > Timer > Stop timer.Interval timerThe interval timer in your device allows you to store multiple interval timers. You can define and store up to 10 timing periods for each interval timer. Once at least one interval timer is set and stored, you can select the interval timer and one of the stored intervals for that timer. When the selected interval expires, your phone sounds an alarm, vibrates, and flashes its lights.To set an interval timer, do the following:1. Select Menu > Organizer > Timer > Interval timer.2. Select Add new timer. This option only appears if you have already created an interval timer.3. Enter a name for the timer, and select Save.4. Enter a name for the first timer period, and select Save.5. Enter the desired time interval, and select OK.6. Select an existing stored period and Edit period, Add period, Delete period, or Start timer.To use an interval timer:
Organizer811. Select Menu > Organizer > Timer > Interval timer, and one of the set interval timers. Add new timer is the only choice if you have not yet set any interval timers.2. Select Start timer, View timer, Edit timer, Add new timer, or Delete timer. These options only appear if you have already created an interval timer.■StopwatchYour phone has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.Measure split or lap timeUse the split time or lap time functions for activities where you need to pace yourself. To measure split or lap times, do the following:Split timing—Use the split time function for such activities as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time. Each time you select Split, the new measured time appears at the beginning of the list. The maximum number of splits is 20.Lap timing—Use the lap time function when you want to track how long it takes to complete each cycle or lap. Select Lap to note the lap time. The clock stops, then immediately restarts from zero. The lap time appears below the running time. Each time you select Lap, the new measured time appears at the beginning of the list. The maximum number of laps is 20.1. Select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start.2. Select Stop to end timing and display total time.Save a timeTo save a time while the clock is running, select Stop > Save, enter a name for the measurement, and select OK. If you do not enter a name, the total time is used as the default title for the lap or split time.
Organizer82Stopwatch optionsSelect Menu > Organizer > Stopwatch and one of the following:Continue—Continue to measure time and return to the stopwatch screen. This option appears only if the clock is running.Show last time—View the last measured time.Split timing—Use the split time function.Lap timing—Use the lap time function.View times—Browse saved times.Delete times > One by one or Delete all—Delete saved times.Stop—Stop the clock.Operation noteIf you press the end key and return to the standby mode, the clock continues to run in the background, and   appears at the top of the screen.
Catalogs8311. CatalogsCatalogs is a network service. Contact your wireless network operator for more information. See "Network services," p. 6.
Mobile web8412. Mobile webMobile web is a network service. See "Network services," p. 6.Your phone has a built-in browser you can use to connect to selected services on the mobile internet. If your wireless service provider supports this feature, you can view weather reports, check news or flight times, view financial information, and much more. The web browser on your phone can display WAP-based content.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any internet site.If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted. The service provider secures the data transmission between the gateway and the content server.Important: Use only services that you trust and that offer adequate security and protection against harmful software.■Mobile internet accessBecause mobile internet content is designed to be viewed from your phone, your wireless provider is now your mobile internet service provider as well.Your wireless provider has created a home page and set up your browser to go to this page when you log on to the mobile internet. Once at your service provider’s home page, you may find links to a number of other sites.It should not be necessary to manually configure the browser on your phone. Normally this is done by your wireless provider when you subscribe to the feature. Contact your wireless provider if you have problems using the browser.■Sign on to the mobile internetSelect Menu > Mobile web.After a brief pause, your phone attempts to connect to your wireless provider’s home page. If you receive an error message, your phone may not be set up for browsing. Contact your wireless provider to make sure that your phone is configured properly.
Mobile web85■Navigate the mobile internetSince your phone screen is much smaller than a computer screen, mobile internet content is displayed differently than you may be accustomed to seeing. This section contains guidelines for using phone keys to navigate a WAP site.Phone keys• To browse the WAP site, scroll up or down.• Select a highlighted item.• To enter text, press # to switch text input modes, and press 0-9.• To enter special characters, press *.Receive a call while onlineDepending on your wireless service provider, you may still be able to receive a voice call while using the WAP browser.• To answer the incoming call, press the call key.• To reject the incoming call, press the end key.After you end your voice call, the mobile internet connection automatically resumes.If your wireless service provider does not support incoming calls while browsing, incoming calls are automatically forwarded to voice mail.Make an emergency call while onlineYou can end your data connection and make an emergency call. 1. To close your mobile internet connection, press the end key.2. Press the end key as many times as needed to clear the display and ready the phone for calls. 3. Enter the emergency number for your present location (for example, 911). Emergency numbers vary by location.4. Press the call key.
Mobile web86Clear the cache and disconnectA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache while in the browser menu, select Navigate > Advanced > Clear. Scroll to the cache and select Cache > Clear. The cache also clears when you press and hold the end key to power off your device.To close your mobile internet connection while browsing, press the end key.
Extras8713. ExtrasYour wireless provider may provide extra features in the Extras menu.■Memory cardTo manage the content of your microSD card, select Menu > Extras > Memory card > Options > Type of view, Sort, Application settings, Add folder, Memory status, or Activation key list.■GamesDepending on your service provider, games and other applications may be preloaded on your phone. Select Menu > Extras > Games to display the games. Select Menu > Extras > Games >Options to manage your games. Select Options > Memory status to view the memory available for game installations.■CollectionYour phone software includes some Java applications specially designed for this Nokia phone.Launch an applicationSelect Menu > Extras > Collection. Scroll to an application, and select Open, or press the call key.An application may require a few seconds to load. When you open an application, wait for the launch screen to disappear. At that point, the application is ready.Leaving applications running in the background increases the demand on battery power and reduces the battery life.To view the memory available for application installations, select Menu > Extras > Collection > Options > Memory status.Note: Only install applications from sources that offer adequate protection against harmful software.
PC connectivity8814. PC connectivity■PC data transferYou can transfer data, such as music, photos, and videos, from your device to a compatible PC or from a compatible PC to your device using Bluetooth connectivity. See "Bluetooth connectivity," p. 60.You can transfer data, such as music, photos, and videos, from your device to a compatible PC or from a compatible PC to your device using an IR connection. See "Infrared connectivity," p. 63.Remember to make back-up copies of all important data.■Nokia PC SuiteNokia PC Suite software is available for this phone. Nokia PC Suite is a collection of powerful tools that you can use to manage your phone features and data. Each component is a separate program that includes online helps.Nokia PC Suite software, installation instructions, and other documentation is provided free of charge and can be downloaded from the software downloads of the Nokia web site: www.nokiausa.com/pcsuite.Some of the features in your phone require network support. Contact your service provider for availability and configuration instructions.
Enhancements8915. EnhancementsCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 or AC-4 charger.Warning: Use only batteries, chargers and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cordA few practical rules about accessories and enhancements:• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.Power• Standard 1150 mAh Li-ion Battery (BL-6C)• Compact Charger (AC-3)• Travel Charger (AC-4)• Mobile Charger (DC-4)• Charger Adapter (CA-44)Use the CA-44 charger adapter to connect the phone with Nokia chargers with a larger barrel size, including ACP-7, ACP-8, ACP-9, ACP-12, AC-1 (retractable charger), and LCH-12 (mobile charger).USB data cable• Connectivity Cable (CA-53)
Enhancements90Handsfree• Headrest Handsfree (BHF-3)• CDMA Headrest Handsfree (BHF-4)• Easy to Use Car Handsfree (HF-3)• Advanced Plug-in Car Handsfree (HF-6)• Wireless Plug-in Car Handsfree (HF-6W)Headsets• Mono Headsets (HDB-4, HS-5, HS-6, HS-8, HS-9)• Stereo Headsets (HDS-3, HS-3, HS-23)• Wireless Mono Headsets (HDW-3, HS-4W, HS-11W, HS-21W, HS-36W)Miscellaneous• Inductive Loopset (LPS-4)•TTY Adapter (HDA-10)• Advanced Car Kit (CK-1W)•Audio Adapter (AD-15)• Music Stand (MD-1)
Battery information9116. Battery information■Charging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.
Battery information92■Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram1.  W hen looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.
Battery information93What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance94Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.• Do not attempt to remove the battery from the device. Nokia recommends that you take the device to the nearest authorized service facility for replacement of the battery.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep, such as contacts and calendar notes, before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.
Additional safety information95Additional safety information■Operating environmentYour device and its enhancements may contain small parts. Keep them out of the reach of small children.Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PacemakersPacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless device or phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. To minimize the potential for interference, persons with pacemakers should do the following:• Always keep the device more than 15.3 centimeters (6 inches) from their pacemaker when the device is switched on• Not carry the device in a breast pocket
Additional safety information96• Hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you have any reason to suspect that interference is taking place, switch off your device immediately.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your network operator.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advized to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not
Additional safety information97always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.■Emergency callsImportant: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call, make sure your device is properly charged before attempting any emergency calls. If your battery becomes empty, you cannot receive or make calls, including emergency calls and must wait a few minutes after the charging begins to place your call.1. If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid UIM (CDMA SIM) card is properly inserted in the device.2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the official emergency number for your present location, and press the call key. Emergency numbers vary by location.If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in an offline or flight mode you must change the profile to activate the device function before you can make an emergency call. Consult this guide or your network operator. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.■Certification information (SAR)This mobile device meets guidelines for exposure to radio waves.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include
Additional safety information98safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear is 0.67 W/kg.Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at http://www.nokia.com.Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.13 W/kg and when properly worn on the body is 0.80 W/kg. Information about this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QMNRM-154.■Technical informationDimensions—Width 43 mm (1.69 inches); length 105 mm (4.1 inches); depth 17.3 mm (0.68 inch)Weight—105 g (3.7 oz) with BL-6C Li-ion BatteryWireless networks—CDMA 800 and 1900 MHz, AMPS, and Bluetooth wireless technologyVolume—78cc (4.76 inch3)Frequency range (Tx)—AMPS: 824.04-848.97 MHz; PCS: 1851.25-1908.75 MHz; Cellular: 824.70-848.37 MHzFrequency range (Rx)—AMPS: 869.04-893.97 MHz; PCS: 1931.25-1988.75 MHz; Cellular: 869.70-893.37 MHzBluetooth: 2402.0 - 2480.0 MHz
Additional safety information99GPS frequency—1575.42 MHz■Battery informationThis section provides information about battery charging times with the Compact Charger (AC-3), the Travel Charger (AC-4), talk, and standby times. Be aware that the information in this section is subject to change. For more information, contact your service provider.Charging timesThe following charging times are approximate with the BL-6C 1150 mAh Li-ion battery:Travel Charger (AC-4): up to 1 hour 45 minutesCompact Charger (AC-3): up to 3 hoursTalk and standby timesOperation times are estimates only and depend on signal strength, phone use, network conditions, features used, battery age and condition (including charging habits), temperatures to which the battery is exposed, and many other factors.Talk time: 3 to 4 hours (digital)Standby time: 8 to 12 days
Index100IndexNUMERICS1-touch dialing 37, 54Aabout your device 7access codes 68alarm clock 71repeating 71antenna 14application settings 69applicationscollection 87automate voicemail 31automatic redial 54Bback coverremove 15replace 17backlight time-out 52batteries and chargers 91battery 14, 100authentication 92charge 18charging times 100information 91remove, replace 15talk and standby times 100Bluetooth connectivity 60receive data 63set up 62settings 62business cards 41Ccalendarmake notes 73open 72options 72receive, send notes 74settings 74view 73callanswer or reject 19timers 34call log 33call restrictions 67call settings 53call waiting 20caller groups 37calling cards 55callsconference 21duration 34make 19mute phone during 20options during 20camera 44changing options 44take photos 44care and maintenance 94certification information (SAR) 98chargerconnect 18information 91times 100collection applications 87conference calls 21connectivityphone 60contacts list 36add 36delete 40edit 39send 41view 40countdown timer 79currency converter 79Ddatacall duration 34transfer 88data cable transfer 64data or fax calls 56date setting 53dialed numbers 33
Index101dialing codes 32displaymain menu 12settings 51display language 57DTMF tones 58Eemergency calls 85, 98with keypad locked 57enhancements 66approved 89equalizer 49ESN 8extras 87Ffax calls 34FCC information 98file transfer 64folders 42font colour 51Ggallery 42games 87go to functions 13Hheadsetconnect 18helpget 8in-phone 12text activation 12help text 59Iindicators and icons 11infrared 63infrared connectivity 63international prefix 56internet, see wireless internetInterval timer 80IR 63Kkeyguardautomatic 57lock and unlock 21Llanguages 57lap time 81location info sharing 53log 33logsclearing 34dialed numbers 33missed calls 33received calls 33Mmain menu display 12maintenance services 8make calls 19media 44media player 45MEID 8memory 58memory card 87message folders 26messagesdelete 28minibrowser messages 32text messages 24voice messages 30microSD card 16, 87minibrowsercall duration 35minibrowser messages 32missed calls 33mobile web 84music player 45mute phone 20Nnavigation key 58networkapproved for 7services 6, 69settings 69network services 6
Index102Nokia PC Suite 88notes 75options 76send 76Oorganizer 71PPC connectivity 88personal unblocking key 69phonedetails 70keys and parts 9menus 11set up your 14phone connectivity 60phone settings 57photographs 44PIN codes 66change 68playradio 47play music 46predictive text 22PUK codes 69Qquick keys 11Rradio 47received calls 33recording sound 49repeating alarm 71restore factory settings 70Ssafetyimportant safety information 96safety information 5battery 100screen saver 51scroll method 11security codeschange 68security level 67security settings 66settime 53settings 50shared memory 7snooze time-out 72split time 81standard mode 22standby mode 10settings 51standby time 100start-up tone 59stopwatch 81Ttalk time 100technical information 99text entry 22predictive text 22standard 22text messages 24themes 52time and date settings 53timed profiles 50timercountdown 79interval 80timers 79to-do listoptions 77send 77tone settings 52transfer files 64turn phone on or off 18Vvideorecord 44viewsaved messages 27voice dialing 38, 59voice messages 30voice privacy 68voice recorder 48voicemail 30volume
Index103adjust 19volume control 19Wwallpaper 51wireless internetmake emergency call while online 85writing language 57
Index104

Navigation menu