Microsoft RM-154 AMPS/CDMA800/1900 Cell Phone with Bluetooth User Manual

Microsoft Mobile Oy AMPS/CDMA800/1900 Cell Phone with Bluetooth

UserManual.wiki >

Microsoft >

RM-154 User Manual >

Manual HTML Version

Manual

Nokia 6275 and Nokia 6275i User

Guide

Part No. 9250012, Issue No. 1

Nokia, Nokia Connecting People, Pop-Port, Nokia 6275, Nokia 6275i, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other

company and product names mentioned herein may be trademarks or trade names of their

respective owners. Copyright protections may prevent some images, music (including ringing

tones), and the content from being copied, modified, transferred, or forwarded.

US Patent No 5818437 and other pending patents. T9 text input software Copyright

Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.

microSD is a registered trademark of the SD Card Association.

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6275 and Nokia 6275i

products. Nokia operates a policy of ongoing development. Nokia reserves the right to make

changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT

AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO

THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE

RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and

regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using

your telephone if such interference cannot be eliminated. If you require assistance, contact

your local service facility. This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received including interference that may

cause undesired operation. Any changes or modifications not expressly approved by Nokia

could void the user’s authority to operate this equipment.

Contents

For your safety.................................................................................... 5

Welcome.............................................................................................. 8

1. Phone at a glance ...................................................................... 9

2. Set up your phone ................................................................... 14

3. Text entry ................................................................................. 22

4. Messages................................................................................... 24

5. Log ............................................................................................ 33

6. Contacts.................................................................................... 36

7. Gallery....................................................................................... 42

8. Media ........................................................................................ 44

9. Settings..................................................................................... 50

10. Organizer .................................................................................. 71

11. Catalogs .................................................................................... 83

12. Mobile web............................................................................... 84

13. Extras ........................................................................................ 87

14. PC connectivity ........................................................................ 88

15. Enhancements .......................................................................... 89

16. Battery information ................................................................. 91

Care and maintenance ..................................................................... 94

Additional safety information......................................................... 95

Index............................................................................................... 100

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

Switch on safely

Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Road safety comes first

Obey all local laws. Always keep your hands free to operate the

vehicle while driving. Your first consideration while driving should be

road safety.

Interference

All wireless phones may be susceptible to interference, which could

affect performance.

Switch off in hospitals

Follow any restrictions. Switch the phone off near medical

equipment.

Switch off in aircraft

Follow any restrictions. Wireless devices can cause interference in

aircraft.

Switch off when refueling

Do not use the phone at a refueling point. Do not use near fuel or

chemicals.

Switch off near blasting

Follow any restrictions. Do not use the phone where blasting is in

progress.

Use sensibly

Use only in the normal position as explained in the product

documentation. Do not touch the antenna unnecessarily.

Qualified service

Only qualified personnel may install or repair this product.

For your safety

Enhancements and batteries

Use only approved enhancements and batteries. Do not connect

incompatible products.

Water-resistance

Your phone is not water-resistant. Keep it dry.

Backup copies

Remember to make back-up copies or keep a written record of all

important information stored in your phone.

Connecting to other devices

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

Emergency calls

Ensure the phone is switched on and in service. Press the end key as

many times as needed to clear the display and return to the start

screen. Enter the emergency number, then press the call key. Give

your location. Do not end the call until given permission to do so.

■Network services

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to

function. These network services may not be available on all networks or you may

have to make specific arrangements with your service provider before you can

utilize network services. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks

may have limitations that affect how you can use network services. For instance,

some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Your

device may also have been specially configured. This configuration may include

changes in menu names, menu order and icons. Contact your service provider for

more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP

protocols. Some features of this device, such as Mobile web require network

support for these technologies.

For your safety

■About your device

The wireless device described in this guide is approved for use on the CDMA 800

and 1900, and AMPS 800 networks. Contact your service provider for more

information about networks. When using the features in this device, obey all laws

and respect privacy and legitimate rights of others. When taking and using

images or video clips, obey all laws and respect local customs as well as privacy

and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless device use may cause interference or danger.

■Shared memory

The following device features may share memory: contacts; text messages;

photos, images, and tones in the gallery; calendar notes; games; and

applications. Use of one or more of these features may reduce the memory

available for the remaining features sharing memory. If your phone displays a

message that the memory is full when you try to use a shared memory feature,

delete some of the information or entries stored in the shared memory features

before continuing. Some of the features, such as photos, images, and tones in the

gallery; text messages; and applications may have a certain amount of memory

specially allotted to them in addition to the memory shared with other features.

Welcome

Congratulations on your purchase of the Nokia mobile phone. Your phone

provides many functions which are practical for daily use, such as a hands-free

loudspeaker, camera, MP3 player, video recorder, and more. Your phone can also

connect to a PC, laptop, or other device using a USB data cable, Bluetooth

wireless technology, or infrared.

■Getting help

Check www.nokia.com/support or your local Nokia Web site for the latest

version of this guide, additional information, downloads, and services related to

your Nokia product.

Find your phone label

If you need help, the Nokia Care

Contact Center is available for

assistance. Before calling, we

recommend that you write down

the Electronic serial number (ESN)

or Mobile Equipment ID (MEID) and

have it available.

The ESN or MEID is found on the

type label, which is located beneath the battery on the back of the phone. See

"Remove the back cover," p. 15 and "Remove the battery," p. 15.

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version

may be available at www.nokia.com. An interactive tutorial for this product may

be available at www.nokiahowto.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals,

including those with disabilities. For more information visit the Web site at

www.nokiaaccessibility.com.

Phone at a glance

1. Phone at a glance

■Keys and parts

Front view

Earpiece (1)

Display (2)

Scroll key (3)

Right selection key (4)

End and power key (5)

Keypad (6)

Pop-Port™ connector (7)

Microphone (8)

Charger port (9)

Call key (10)

Left selection key (11)

Center selection key (12)

Phone at a glance

Side views

Volume key (1)

Camera flash and self-

portrait mirror (2)

Camera lens (3)

Camera key (4)

Loudspeaker (5)

Headset connector (6)

Infrared (7)

■Standby mode

Depending on your wireless service

provider and the model number of

your phone, some or all of the

following selection keys may appear

in the standby mode.

The standby mode indicates that

your phone is idle.

Signal strength (1)—More bars

indicate a stronger network signal.

Menu (2)—Press the center selection

key to select this option.

Go to (3)—Press the left selection

key to select this option.

Names or network operator menu (4)—Press the right selection key to select this

option.

Battery level (5)—A filled in battery indicates more power.

Phone at a glance

■Quick keys

Depending on your wireless service provider and the model number of your

phone, some or all of the following scroll key shortcuts may be available in the

standby mode.

In the standby mode, the four-way scroll and center selection keys instantly take

you to frequently-accessed menus:

Scroll up key—Go to the camera.

Scroll right key—View the calendar.

Scroll down key—Go to the contacts list.

Scroll left key—Create a text message.

Center selection key—Display available applications or selects highlighted

menus and submenus.

■Indicators and icons

To view the icons on your phone, select Menu > Settings > Phone details > Icon

details.

■Phone menus

Phone features are grouped according to function and are accessed through the

main menus. Each main menu contains submenus and lists from which you can

select or view items and customize your phone features. You can access these

menus and submenus by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network.

For more information, contact your wireless provider.

Scroll method

1. To select Menu, use the center selection

key. To scroll through the main menu,

use the scroll key.

On the right side of the screen, a scroll

bar is displayed with a tab that moves

up or down as you move through the

menus. This provides a visual representation of your current position in the

menu structure.

Phone at a glance

2. When you arrive at a menu, to enter submenus, press Select (the center

selection key).

To return to the previous menu, select Back from the submenu level.

To return to the standby mode from any menu or submenu, press the end key.

Main menu display

You can control whether your phone menu is displayed as a List, Grid or Grid with

labels. By default, the main menu displays in Grid with labels format.

Select Menu > Options > Main menu view > List, Grid, or Grid with labels.

If supported by your wireless service provider, you can also change the order of

menus in your main menu.

Select Menu > Options > Organize. Scroll to a menu, and select Move. Use the

scroll key to move the menu to a new location, and select OK. You can repeat this

procedure to customize your main menu.

To save the changes, select Done > Yes.

In-phone help

Many features have brief descriptions (help text) that can be viewed on the

display. To view these descriptions, scroll to a feature, and wait for about

15 seconds. Scroll down to view all of the description, or select Back to exit.

In order to view the descriptions, you must activate help text. Select Menu >

Settings > Phone > Help text activation.

■Security code settings

Your device has a security option allowing you to lock your phone with a PIN

code. When the PIN code is set and turned on, no outgoing calls are allowed and

the menu cannot be accessed without entering the correct code first. This

prevents unauthorized outgoing calls or access to any information stored on your

device.

The PIN code option is in the Settings menu. The first time you access the

Security option, you must enter a PIN code. The default PIN code may vary

depending on your wireless service provider who provided your UIM card.

The PIN code protects the UIM card from unauthorized access. The PIN code can

be 4–8 digits in length. After three successive incorrect entries, the PIN code is

Phone at a glance

blocked. You need to enter the personal unblocking key (PUK) code. See"Personal

unblocking key (PUK) code," p. 69.

■Go to functions

The Go to menu allows you to change the function of the left selection key on

your phone so that your most frequently used functions can be quickly accessed

from the Go to menu in the standby mode.

Select options

1. Select Go to > Options > Select options, and scroll to the options you want to

add.

2. Select Mark to add an option or Unmark to remove an option.

3. When you have marked or unmarked the desired options, select Done; to save

the changes, select Yes.

4. Select Go toto display a list of the options that you selected in step 3.

Organize functions

Select Go to > Options > Organize. Scroll to an option, and select Move. Scroll to

move the option to a new location, and select OK. You can repeat this procedure

to customize your Go to menu.

To save the changes, select Done > Yes.

Set up your phone

2. Set up your phone

■Antenna

Your device has an internal antenna. Hold the device as

you would any other telephone with the antenna area

pointed up and over your shoulder.

In the Nokia 6275i phone, the internal GPS antenna is

activated when placing emergency calls or when On is

selected from the Location info sharing menu (a

network-dependent feature)."Location info sharing," p.

53.

Note: As with any other radio transmitting

device, do not touch the antenna unnecessarily

when the device is switched on. Contact with the

antenna affects call quality and may cause the

device to operate at a higher power level than

otherwise needed. Avoiding contact with the

antenna area when operating the device optimizes

the antenna performance and the battery life.

■Battery

Always switch off the power and disconnect the charger before removing the

battery. Avoid touching electronic components while changing the covers.

Always store and use the device with the covers attached.

Prolonged, continuous use of your device may increase the device temperature.

The increased temperature is a normal function of this product and does not pose

a safety concern for you or the device. If the temperature is uncomfortable to

you, use a headset or allow your device to return to room temperature before

your next call.

Set up your phone

Remove the back cover

Note: Always switch

off the power, and

disconnect the

charger and any other

device before

removing the cover.

Avoid touching

electronic

components while

changing the cover.

Always store and use

the device with the

cover attached.

1. With the back of the phone facing you, press down and hold the back cover.

2. Slide the back cover toward the bottom of the phone, lift up, and remove.

Remove the battery

After you have removed the

back cover, insert your finger

into the finger grip, and lift

the battery from its

compartment.

Always switch the device off,

and disconnect the charger

before removing the battery.

Set up your phone

MicroSD card

Your phone has a microSD

card slot located under the

battery. To insert the microSD

card, complete the following

steps.

Keep all microSD cards out of

the reach of small children.

1. Remove the battery. Slide

the microSD slot cover

toward the base of the

phone (1), and lift open

the microSD slot cover (2).

2. Insert the card firmly as

shown in the illustration

(3), and close the microSD

slot cover (4).

3. Slide the microSD slot

cover toward the top of

the phone (5), and replace

the battery and back

cover.

Use only microSD cards approved by Nokia for use with this device. Nokia utilizes

the approved industry standards for memory cards but not all other brands may

function correctly or be fully compatible with this device.

Important: Do not remove the memory card while reading or writing to

the card. Doing so may cause data corruption on the card or the phone.

UIM (CDMA SIM) card slot

Your phone has a built-in UIM card slot. However, the UIM is not functional in

this phone model. Avoid placing anything into the UIM card slot.

Set up your phone

Replace the battery

1. Insert the battery, gold-

coloured contact end

first, into the battery

slot.

2. Push down on the other

end of the battery to

snap the battery into

place.

Replace the back

cover

1. Set the back cover on the

phone with the cover

tabs aligned to the slots

in the phone.

2. Press the back cover

latch down, and slide the

back cover toward the

top of phone.

3. Make sure back cover

latch is secure.

Set up your phone

Charge the battery

1. Plug the charger transformer into a standard wall outlet.

2. Connect the charger to

the phone.

If necessary, you can

use a CA-44 adapter

cable (1) to connect a

charger and the phone.

After a few seconds, the

battery indicator in the

display scrolls. If the

battery is completely

discharged, it may take a few minutes before the charging indicator appears

on the display or before any calls can be made.

■Turn your phone on or

off

1. To turn your phone on or off, press

and hold the end key for at least

3 seconds.

2. Enter the lock code, if necessary, and select OK.

■Connect the headset

A compatible headset, such as HS-5, may

be included with your phone or purchased

separately as an enhancement. See

"Enhancements," p. 66.

1. Plug the headset connector into the

Pop-Port™ connector at the bottom

end of your phone. appears on

the display.

2. Position the headset on your ear.

Set up your phone

With the headset connected, you can make, answer, and end calls as usual.

Use the keypad to enter numbers. Press the call key to place a call. Press the end

key to end a call.

You can also plug a compatible headset, the such as the HS-9 Universal Headset,

into the 2.5-mm stereo headset jack on the side of your phone to allow

hands-free operation. See "Enhancements," p. 66.

Warning: When you use the headset, your ability to hear outside sounds

may be affected. Do not use the headset where it can endanger your

safety.

■Make calls

1. Enter the phone number, including the area code.

For international calls, press * twice for the international prefix (the +

character replaces the international access code) and then enter the country

code, the area code without the leading 0, if necessary, and the phone

number.

2. To call the number, press the call key.

3. To end the call or to cancel the call attempt, press the end key.

To make a call using names, search for a name or phone number in Contacts.

Press the call key to call the number.

To access the list of up to 20 numbers you last called or attempted to call, press

the call key once in the standby mode. To call the number, select a number or

name, and press the call key.

■Answer or reject a call

To answer an incoming call, press the call key. To end the call, press the end key.

To reject an incoming call, press the end key. To reject an incoming call, press the

end key within1.5 seconds.

To mute the ringing tone, press the volume key, or select Silence.

To adjust the volume of the earpiece, press the volume key located on the right

side of your phone. See "Side views," p. 10. A bar chart is displayed indicating the

volume level.

Set up your phone

Note: If the Divert if busy function is activated to forward the calls (for

example, to your voice mailbox) rejecting an incoming call also forwards

the call.

Call waiting

If your network operator supports this feature, call waiting notifies you of an

incoming call even while you are in a call. You can then accept, reject, or ignore

the incoming call.

1. Select Menu > Settings > Network services > Call waiting > Activate or

Cancel.

2. During a call, select Answer, or press the call key or voice key to answer the

waiting call. The first call is put on hold.

3. Press the end key to end the active call.

Mute phone during call

To mute your phone during a call, select Mute; to unmute the phone, select

Unmute.

■Options during a call

Many of the options that you can use during a call, are network services. Check

with your wireless service provider for more information.

During a call, select Options and one of the following:

Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.

Add new call—Initiate a conference call. See"Make a conference call," p. 21.

Save—Save a number entered during a call.

Add to contact—Add a number entered during a call to a contact in your list.

End all calls—Disconnect from all active calls.

Send DTMF—Enter the numbers, and select DTMF to send the numbers as tones.

Contacts—View the contacts list.

Menu—View the phone menu.

Warning: Do not hold the device near your ear when the loudspeaker is

in use because the volume may be extremely loud.

Set up your phone

Make a conference call

Conference calling is a network service that allows you to take part in a

conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > Add new call.

3. Enter the phone number of the second participant; or to retrieve a number

from your contacts, select Search and the number you want to call.

4. Press the call key. The first participant is put on hold.

5. When the second participant picks up, press the call key to connect the calls.

6. To end the conference call, press the end key.

■Keypad lock (keyguard)

To prevent the keys from being accidentally pressed, select Menu, and press *

within 3.5 seconds to lock the keypad.

To unlock the keypad, select Unlock, and press *. If keyguard is on, enter the

security code if requested.

To answer a call when keyguard is on, press the call key. When you end or reject

the call, the keypad automatically locks.

When keyguard is on, calls may be possible to the official emergency number

programmed into your device.

Text entry

3. Text entry

You can use two methods for entering text and numbers: standard mode and

predictive text mode. Select Clear to backspace the cursor and delete a character.

Select and hold Clear to backspace continuously and delete characters.

■Standard mode

Standard mode is the only way to enter text into the contacts list and to rename

caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second

letter, etc. If you pause briefly, the last letter in the display is accepted and

your device awaits the next entry.

• Press 0 to enter a space, thereby accepting a completed word.

• Press 1 to insert a period into your message.

• Press * to display a complete list of special characters.

• Press and hold # to bring up the Editor settings (Number mode, Prediction on

or Prediction off, Writing language).

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry

screen to bring up the Editor settings. Select Number mode, and the device

returns to the message entry screen and switches the Abc icon in the upper left

corner of the display to the 123 icon (or back).

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and

hold * if predictive text is on). Press * again to cycle through all available

characters. Scroll to navigate through the list of special characters. With a

character highlighted, select Use to insert the character into your message.

■Predictive text mode

Much faster than the standard mode method, predictive text input enables you to

write messages quickly using your keypad and the built-in dictionary. In predictive

text mode, your phone predicts the words as you enter them.

Text entry

Activate or deactivate

1. At any text entry screen, select Options > Prediction on to activate or

Prediction off to deactivate.

2. If you are turning predictive text on, select the language of your choice.

Text entry

The following illustration shows how to enter the word Nokia with predictive

text. With the English dictionary selected, press the following number keys one

time only (6, 6, 5, 4, 2). The screen displays Nokia by predicting the letter and

word, based on your keypad entry:

6 6 5 4 2

•Press 0 to enter a space, and begin writing the next word.

• If a displayed word is not correct, press * to see other matches. To return to

the previous word in the list of matches, select Previous

• If ? appears after a word, select Spell to add the word to the dictionary.

•Press 1 to insert a period into your message.

•Press and hold * to display special characters. Press * again to cycle through

all available characters.

■Change case and mode

Press # to switch between uppercase, lowercase, and sentence case text. As you

press #, the following icons (not the descriptions) appear in the upper left of the

display screen:.

Uppercase text: standard mode is on.

Lowercase text: standard mode is on.

Sentence case text: standard mode is on. This option is available

only at the beginning of a sentence.

Note: You can press # within 2 seconds to switch between standard

mode and predictive text mode.

Uppercase text: predictive text is on.

Lowercase text: predictive text is on.

Sentence case text: predictive text is on. This option is available

only at the beginning of a sentence.

Messages

4. Messages

If you have subscribed to a message network service, you can send and receive

messages to compatible phones also subscribed to a message service. You can

also send and receive multimedia and e-mail messages if supported by your

network operator. You can make distribution lists that contain phone numbers

and names from your contacts list.

Your device supports the sending of text messages beyond the character limit of

a single message. Longer messages are sent as a series of two or more messages.

Your service provider may charge accordingly. Characters that use accents or

other marks, and characters from some language options like Chinese, take up

more space limiting the number of characters that can be sent in a single

message.

When composing text or multimedia messages, check the number of characters

allowed in the top right corner of the message. Using Unicode characters takes

up more space. With Unicode characters in your message, the indicator may not

show the message length correctly. Before sending the message, the phone tells

you if the message exceeds the maximum length allowed for one message.

Important: Exercise caution opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

Note: When you send a message, your device may display Message sent,

indicating your device has sent the message to the message center

number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details

about messaging services, check with your network operator.

■Text messages

Write and send

1. Select Menu > Messaging > Text messages > Create message.

2. Write a message using the keypad.

Depending on the messaging service enabled, some or all of the following

options are available while writing your message:

Sending options > Mark or Unmark > Urgent, Delivery reports, Callback

number:, or Signature. Select Sending options for a single message. See

"Sending options," p. 29.

Messages

Clear all—Erase all the text from the message editor.

Add-ins—Add sounds, animations, or pictures to a text message.

Styles—Select font size, font appearance, and text alignment of a text

message.

Insert contact—Insert a name from your contacts list into your message.

Insert number—Insert a phone number or find a phone number in the

contacts list.

Save—Select Drafts to save the message in the drafts folder or Templates to

save the message as one of your predefined templates in the templates folder.

Exit editor—Exit the message editor.

Use template—Insert a predefined template into your message.

Insert smiley—Insert a smiley into your message.

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary (only available with predictive text on).

Insert symbol—Insert a special character into your message (only available

with predictive text on).

Writing language—Choose the language you want to use.

Prediction on or Prediction off—Turn the predictive text on or off.

Matches—View matches in the dictionary for the word you want to use (only

available with predictive text on and when the same set of key presses can

produce multiple words).

3. To send the message, select Send to > Recently used, Send to number, Send to

distrib. list (if a distribution list has been created), or Send to many.

4. Enter the recipient’s phone number or e-mail address, or select Search to

retrieve a number or e-mail address from your contacts list; select OK.

Read message

When you receive a message, a notification message and are displayed.

1. Select Show to read the message or Exit to dismiss the notification and read

the message later from your inbox. See "View saved messages," p. 27.

2. Scroll up or down to view the whole message, if necessary.

Options

When reading a text message, select Options to access some or all of the

following options:

Messages

Delete—Discard the message.

Use detail—Use or save the number, e-mail address, or Web address.

Move—Save the message to Archive, Templates, or a folder you have created.

Forward—Forward the message to another phone number or e-mail address.

Lock or Unlock—Lock or unlock the message.

Rename—Edit the title of the message.

Reply to message

1. Select Menu > Messaging > Text messages > Inbox and your desired message,

or when you receive a message, select Show.

2. Select Reply > Empty screen, Original text, Template, or one of the predefined

answers; then compose your reply using the keypad.

3. After creating the reply, select Send. The sender’s phone number or e-mail is

used as the default.

Templates

Templates are short, prewritten messages you can recall and insert into new text

messages when you are short on time.

1. Select Menu > Messaging > Text messages > Create message > Options > Use

template.

2. Select your desired template.

3. Select Send to > Recently usedSend to number, Send to e-mail, Send to many,

or Send to distrib. list (if a distribution list is created).

4. Enter the recipient’s phone number or e-mail address, or select Search to

retrieve a number or e-mail address from your contacts list; select Send.

Text message folders

Save messages

You can save drafts of messages or received messages to an existing folder or to a

folder that you have created.

1. Open the received message or create a new message, and select Options.

2. To save a received message, select Move > Archive, Templates, or a folder you

have created.

Messages

To save the draft of a message you have created, select Save > Drafts or

Templates.

View saved messages

1. Select Menu > Messaging > Text messages.

2. Select the folder containing the message you want to view:

Inbox—Automatically stores any incoming messages

Outbox—Stores messages that have not been sent

Sent items—Stores messages that have been sent

Drafts—Stores messages created as drafts

Archive—Stores messages that you choose to archive, including unread ones

Templates—Stores pictures and prewritten templates. Preloaded templates

can be edited and customized.

My folders—Allows you to organize your messages by creating custom folders

and saving some of your messages here. Select Options > Add folder, Rename

folder, or Delete folder to add a custom folder or rename or delete a folder you

have created.

You can only delete folders created in my folders; the inbox, sent items, archive,

and templates folders are protected. When deleting a folder, you are also

deleting all messages in the folder.

Distribution lists—Stores created distribution lists

3. When the folder opens, select the message you want to view.

Create distribution lists

Distribution lists allow you to send text messages to a designated group of

people.

1. Select Menu > Messaging > Distribution lists > New list.

If you create a second distribution list, select Menu > Messaging >

Distribution lists > Options > Create new list.

2. Enter a name for the list, and select OK.

3. To add a contact to this list, select Add new, and add the contacts one by one.

A distribution list only contains phone numbers of recipients.

Messages

Add and remove contacts

To add contacts, select Menu > Messaging > Distribution lists > the list > Add

new. Add the contacts one by one.

To remove contacts, select Menu > Messaging > Distribution lists > the list >

Options > remove contact name.

Manage distribution lists

1. Select Menu > Messaging > Distribution lists.

2. Lists you have created appear in the display. Scroll to the list you wish to

modify; select Options and one of the following:

Create new list—Create a new distribution list.

Rename list—Rename the distribution list.

Clear list—Clear the distribution list of all current contacts.

Delete list—Delete the distribution list.

Delete messages

If your message memory is full and you have more messages waiting at the

network, No space for new messages appears in the standby mode. You can do

the following:

• Read some of the unread messages, and delete them individually.

• Delete messages from some of your folders.

Delete a single message

1. Select Menu > Messaging > Text messages.

2. Select the folder containing the message you want to delete.

3. Highlight the message you want to delete.

4. Select Options > Delete.

5. Select Yes to delete the message or No to exit.

Delete all messages in a folder

1. Select Menu > Messaging > Text messages > Delete messages.

2. Select the messages you want to delete:

All—Deletes all messages in all of the folders

All read—Deletes any messages that have been read in all of the folders

Messages

All unread—Deletes any messages that have not been read in all of the folders

3. Select and mark the folders that have messages you want to delete:

Inbox—Deletes all messages from the inbox folder

Sent items—Deletes all messages from the sent items folder

Outbox—Deletes all messages from the outbox folder

Drafts—Deletes all messages from the drafts folder

Archive—Deletes all messages from the archive folder

User defined folders—Deletes all messages from the user defined folder

4. Select Done > Yes to empty the marked folder.

Sending options

To change sending options for all text messages, select Menu > Messaging > Text

messages > Message settings > Sending options and the setting you want to

change:

Priority > Normal or Urgent —Set the priority of a message.

Delivery reports > On or Off—Send a note to yourself confirming delivery of the

message.

Send callback no.—Send a callback number to the recipient. Select Off or enter

your desired phone number to send to the recipient as a callback number, and

select OK.

Signature—Select On to create a signature to send with text messages or Off to

turn this feature off.

To change sending options for one message, select Menu > Messaging > Text

messages > Create message > Options > Sending options, mark or unmark the

setting you want to change:

Urgent—Set the priority of the message as urgent.

Delivery reports—Send a note to yourself confirming delivery of the message.

Callback number—Enter your desired phone number to send to the recipient as a

callback number, and select OK.

Signature—Create a signature to send with the text message.

Messages

Other settings

Select Menu > Messaging > Text messages > Message settings > Other settings

and the setting you want to change:

Save rcvd. text msgs.—Select UIM/ph. if no mem., Phone only, or UIM card only.

Message font size > Small font, Normal font, or Large font

Message overwriting > Sent items only, Inbox only, Sent items & Inbox, or Off

Note: When the message memory is full, your phone cannot send or

receive any new messages. To free up the memory, you can select

Message overwriting to make your phone automatically replace old

messages in the inbox and outbox folders when new ones arrive.

Save sent messages > Always save, Always prompt, or Off

Queue if no digital > On, On prompt, or Off—Messages are stored in the outbox

until they can be sent with digital service.

Send numeric page

■Voice messages

If you subscribe to voice mail, your network operator will give you a voice

mailbox number. You need to save this number to your device to use voice mail.

When you receive a voice message, your device beeps, displays a message, or both.

If you receive more than one voice message, your device shows the number of

voice messages received.

Save voice mailbox number

Your network operator may have already saved your voice mailbox number to

your device. Select OK to leave the number unchanged.

1. Select Menu > Messaging > Voice messages > Voice mailbox no.. The voice

mailbox number is displayed.

2. If the box is empty, enter the voice mailbox area code and number, and

select OK.

Set up voice mail

1. After you save the voice mailbox number, in the standby mode, press and

hold 1.

Messages

2. When you connect to voice mail, and the prerecorded greeting begins, follow

the automated instructions to setup voice mail.

Listen to voice messages

After you set up voice mail, in the standby mode, press and hold 1; or select

Menu > Messaging > Voice messages > Listen to voice msgs. to dial the voice

mailbox number. When you connect and the prerecorded greeting begins, follow

the automated instructions to listen to your voice messages.

Automate voice mail

Voice mail services vary by network operator. The following instructions are

examples of common operations. Please check with your network operator for

specific instructions on using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step. Keep in

mind that each voice mail service may vary. However, it should look similar to

the following:

Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and

press #.

Phone numbers with dialling codes

You can insert special characters called dialling codes into phone numbers such

as voice mail, and save the number to a speed dialling location.

Dialling codes instruct the receiving system to pause, wait, bypass, or accept

the numbers that follow them in the dialling string. To set up dialling codes, do

the following:

1. Select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) speed dialling slot, and select Assign.

3. Enter your mailbox phone number, including the area code.

4. Enter any dialling codes as necessary after the entered phone number.

For example, if you pause for 5 seconds after connecting to voice mail, enter p

twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.

Messages

5. Enter any remaining pauses or other information that enables you to listen to

your messages, and select OK.

6. Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned speed dialling

key in the standby mode.

Insert dialing codes

Press * repeatedly to cycle through dialling codes. When the desired code appears

in the display, pause briefly, and the code is inserted into the dialling string.

The following dialling codes are available:

*—Bypasses a set of instructions

p—Pauses for 2.5 seconds before sending any numbers that follow

+—Replaced by the international access code

w—Waits for you to press the call key before sending the numbers or codes

that follow

Clear voice mail icon

To clear the voice mail icon from the display, select Menu > Messaging > Voice

messages > Clear voice msg. icon.

■Web messaging

Web messaging is a network service. See"Network services," p. 6.

If your network operator supports this feature, you can use the minibrowser to

check for e-mail messages. Select Menu > Messaging > Browser msgs. >

Connect.

Important: Exercise caution when opening messages. E-mail messages

may contain malicious software or otherwise be harmful to your device

or PC.

Log

5. Log

Log stores information about the last 30 missed, received, or dialed

calls. It also displays the total duration of all calls. When the number of calls

exceed the maximum, the most recent call replaces the oldest.

When viewing missed, received, or dialed calls, the menu options are the same:

Time of call—Display the date and time of the call.

Send message—Send a message to the number.

Use number—Edit the number and associate a name with the number.

Save—Enter a name for the number and save it to your contacts list.

Add to contact—Add the number to an existing name in your contacts list, if the

number is not associated with a name.

Delete—Clear the number from memory.

Call—Call the number.

■View missed calls

Missed calls are calls that were never answered. The missed calls feature does not

function when your phone is switched off.

1. Select Menu > Log > Missed calls; select List.

2. Scroll to a name or number, select Options, and an option.

■View received calls

Received calls are calls that have been answered.

1. Select Menu > Log > Received calls.

2. Scroll to a name or number, select Options, and an option.

■View dialed numbers

Dialed calls are numbers you have previously dialed from your phone:

1. Press the call key; or select Menu > Log > Dialled numbers.

2. Scroll to a name or number, and select Options and an option.

Log

■View message recipients

You can view recipients of messages you have sent. Select Menu > Log > Msg.

recipients.

■Clear log lists

You can delete any missed, dialed, or received calls from phone memory.

Select Menu > Log > Clear log lists > All call lists, Missed calls, Received calls,

Dialled numbers, or Msg. recipients.

■Call duration

Note: The actual invoice for calls and services from your service

provider may vary, depending on network features, rounding off for

billing, taxes, and so forth.

To view the duration of your calls, select Menu > Log > Call duration and one of

the following options:

Last call—Check the time of your last call.

Dialled calls—Check the combined time of calls you dialed for either Home or

Roaming.

Received calls—Check the combined time of calls you received for either Home or

Roaming.

All calls—Check the combined time of all calls.

Life timer—Check the total airtime minutes logged on your phone.

Clear timers—Enter your lock code, and select OK to clear all timers on your

phone.

Note: Some timers, including the life timer, may be reset during service

or software upgrades.

■Data or fax calls

Data/fax calls are a network service. See "Network services," p. 6, for more

information. If your wireless service provider supports this feature, you can view

the size or duration of sent or received data and fax calls.

Note: The actual invoice for calls and services from your service

provider may vary, depending on network features, rounding off for

billing, taxes and so forth.

Log

Select Menu > Log > Data/fax calls and one of the following options:

Last sent data/fax—View the size (KB) of the last sent data or fax call.

Last rcvd. data/fax—View the size (KB) of the last received data or fax call.

All sent data/fax—View the size (KB) of all sent data and fax calls.

All received data/fax—View the size (KB) of all received data and fax calls.

Duration of last call—View the duration time of the last data or fax call.

Duration of all calls—View the duration time of all calls.

Clear all data/fax logs—Select Yes to clear all data and fax logs.

■Duration of minibrowser calls

Minibrowser is a network service. See "Network services," p. 6, for more

information. If your wireless service provider supports this feature, you can view

the size or duration of sent or received data from the minibrowser.

Note: The actual invoice for calls and services from your service

provider may vary, depending on network features, rounding off for

billing, taxes and so forth.

Select Menu > Log > Browser calls and one of the following options:

Last sent data—View the size (KB) of the last sent browser data.

Last received data—View the size (KB) of the last received data.

Sent browser data—View the size (KB) of all sent browser data.

Rcvd. browser data—View the size (KB) of all received browser data.

Last browser session—View the duration time of the last browser session.

All browser sessions—View the duration time of all browser sessions.

Clear all browser logs—Select OK > Yes to clear all browser logs.

Contacts

6. Contacts

The contacts list can hold up to 500 contacts with multiple numbers and text notes

for each contact. The amount of numbers and text entries you can save may vary,

depending on the length and total number of entries in the contacts list.

■Add new contacts

To access the contacts list in the standby mode, select Menu > Contacts >

Names.

Save contact name and number

1. In the standby mode, enter the phone number you want to save.

2. Select Save.

3. Enter the name, and select OK.

Save contact number only

1. In the standby mode, enter the phone number you want to save.

2. Select and hold Options.

Save an entry

1. In the standby mode, select Menu > Contacts > Names > Options > Add new.

2. Enter the name, and select OK.

3. Enter the phone number, and select OK > Back.

Save numbers and text items

You can save different types of phone numbers and short text items per name to

the contacts list. The first number you save for any entry is automatically set as

the default, or primary number, which you can always change.

1. In the standby mode, scroll down to display your contacts list, and highlight

the entry to which you want to add a phone number or text item.

2. Select Details > Options > Add detail > Number (General, Mobile, Home, Office,

or Fax), Tone, E-mail address, Web address, Postal address, Note, or Image.

3. Enter the number or text for the type you have selected, and select OK.

Contacts

4. To change a number type, highlight the number, and select Options > Change

type >General, Mobile, Home, Office, or Fax.

Change default number

You can also change which phone number is the default (primary) number for

the contact entry.

1. In the standby mode, scroll down to select the contact entry you want to

change, and select Details.

2. Scroll to the number you want to set as default, and select Options > Set as

default.

Caller groups

You can add contacts list entries to any of five caller groups, and assign a unique

ringing tone or graphic to that group. This enables you to identify callers from the

group by their unique ringing tone or graphic.

1. To assign an entry in your contacts list to a caller group, select your desired

contact entry, and select Options > Details.

2. To manage your caller groups, in the standby mode, select Menu > Contacts >

Caller groups > Group details to display the following caller group options:

Group name—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.

Group logo> On or Change—Set the graphic for the caller group.

Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2-9. To dial those

entries, press and hold the assigned key. See "Set up 1-touch dialing," p. 37 to

activate or deactivate 1-touch dialing.

Assign a key to 1-touch dialing

1. In the standby mode, select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) slot, and select Assign.

3. Enter the number (including the area code) and a name for the number, and

select OK; or select Search to retrieve a number from the contacts list.

Contacts

If 1-touch dialing is off, the device displays a prompt and asks if you want to

turn speed dialling on.

4. Select Yes to activate 1-touch dialing.

Change speed dialing numbers

1. In the standby mode, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you want to change, and select Options >

Change.

3. Enter the new number and a name for the entry, and select OK; or select

Search to retrieve a number from the contacts list.

Delete 1-touch dialing numbers

1. In the standby mode, select Menu > Contacts > 1-touch dialing.

2. Scroll to the entry you want to delete, and select Options > Delete > Yes.

■Voice tags

You can dial up to 25 stored numbers using voice dialing.

Before using voice tags, note the following:

• Voice tags are not language-dependent. They depend on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags, and use them

in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely on voice dialing in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. In the standby mode, scroll to the entry in your contacts list to which you

want to assign a voice tag.

2. Select Details > Options > Add voice tag > Start.

Contacts

3. Speak clearly into the microphone. Do not select Quit unless you want to

cancel the recording. The device automatically stops recording, and saves and

replays the voice tag.

appears next to commands that have voice tags assigned.

Dial a number

1. In the standby mode, press and hold the right selection key with the fold open,

or press and hold the voice key regardless of the fold being open or closed.

2. When you hear several beeps and Speak now appears, release the key.

3. Pronounce the voice tag clearly into the microphone.

When the device finds the voice tag, Found: appears, and the device

automatically dials the number. If the device does not locate a number or

recognize the voice tag, No match found appears.

Voice tags

1. After you have associated a voice tag to a contact, select Menu > Contacts >

Voice tags and your desired voice tag entry.

2. Select Playback, Change, or Delete.

■Edit contacts list entries

1. In the standby mode, select Menu > Contacts > Names, and scroll to the entry

you want to edit in your contacts list.

2. Select Details > Options and one of the following options, which may vary

depending on whether you are editing a contact listed by phone number or

contact name:

View—View the phone number of the contact.

Add detail—Add more details to the contact: Name (only available with no

name added), Number (General, Mobile, Home, Office, or Fax), E-mail address,

Web address, Postal address, Note, Image (only available with no image

added), or Tone.

Edit name, Edit number, Edit detail, or Change image—Edit an existing

contact name, phone number, details, or image attached to the contact.

Delete—Delete more details (Delete number, Delete detail, or Delete detail)

or the entire contact entry (Delete contact) of the contact.

Contacts

Send message—Create and send the contact a text message or

multimedia message.

Use number—Use or save the number (available when you select a contact

listed with a contact name). Select Options to use the number.

Set as default—Change the default number of the contact.

Change type > General, Mobile, Home, Office, or Fax—Change the number type.

Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag

assigned, or select Playback, Change, or Delete with a voice tag assigned.

Copy number—Copy the number from the phone memory to the UIM card or

from the UIM card to the phone memory.

Send business card—Send the contact as a business card to another device.

Caller groups—Select No group to remove a contact from a caller group or

Family, VIP, Friends, Business, or Other to add a contact to an existing caller

group.

1-touch dialing—Add the contact to your speed dialing list.

3. Edit the option to your preference, and select OK.

■Delete contacts entries

To delete all entries in your contacts list, in the standby mode, select Menu >

Contacts > Del. all contacts.

■Access the contacts menu

1. In the standby mode, select Menu > Contacts and one of the following options:

Names—View the entries in your contacts list, and select Details or Options >

Search, Add new, Delete contact, or Copy for your selected entry.

Settings—Change the contacts list view or check the memory status of

your device. To set the default memory, select Phone and UIM, Phone, or

UIM card.

Caller groups—View and edit the properties of any of the caller groups on

the device.

Voice tags—Listen to, modify, or delete a voice tag to a contact in the

contacts list.

1-touch dialing—View or modify the list of speed dialling numbers.

Contacts

Del. all contacts—Delete all entries in your contacts list.

2. Select an option to activate the feature or access its submenu.

Search for a name

1. In the standby mode, scroll down to display the contents of your contacts list.

2. Press the key corresponding to the first letter of the name for which you

are searching.

3. Scroll to select a contact, and select Details to view the details.

Configure settings

You can select how the contacts appear in your contacts list and view the amount

of memory used or available in your device. In the standby mode, select Menu >

Contacts > Settings > Scrolling view to change view of name list or Memory

status to view the device memory used and remaining.

■Send and receive contacts

You can send and receive an entry in your contacts list using text messaging, if

supported by your network operator.

Send a business card

You can send a business card as a text message to a compatible phone or other

handheld device.

1. Highlight your desired entry from your contacts list, and select DetailsOptions

> Send business card > Via text message, Via infrared, orVia Bluetooth.

Default number and All details options appear only if you have more than one

number or detail saved to the contact entry.

2. Enter the number for your recipient, or select Search to retrieve a number

from your contacts list.

3. Select OK and the business card is sent.

Gallery

7. Gallery

You can save pictures, video clips, recordings, and ringing tones to folders in the

Gallery and add new folders. You can download images and tones using SMS,

mobile Internet sites, or Nokia PC Suite.

Your device supports a digital rights management system to protect content you

have acquired. Content such as ringing tones, can be protected and associated

with certain usage rules, for example, the number of usage times or a certain

usage period. Usage rules are defined in the content activation key that can be

delivered with the content or delivered separately, depending on your network

operator. You may be able to update the activation key. Always check the delivery

terms of any content and activation key before acquiring them, as they may be

subject to a fee.

from being copied, modified, transferred, or forwarded.

Your device has about 21 MB of memory for storing files in the Gallery. This memory

is not shared with other functions, such as contacts. If the device displays a

message that the memory is full, delete some existing files before proceeding.

■Folders

1. Select Menu > Gallery > Memory card > Images, Video clips, ThemesGraphics,

Tones, Recordings, Received files, or a folder you created.

2. Select Open to view a list of the files in the folder or Options to access

the following:

Memory card—When a microSD card is in the phone, the card name is

displayed as the first option. To rename the mircoSD card, select OpenOptions

Rename mem. card.

Delete folder —Delete a folder you have created. You cannot delete a

preset folder.

Move—Move the selected folder into another folder. After selecting Move,

scroll to another folder, and select Move to. You cannot move a preset folder.

Rename folder—Rename a folder you have created. You cannot rename a

preset folder.

Gallery

Details—Show the name, size, and date of creation of the selected folder.

Type of view > List with details, List, or Grid—Determine how to display the

folders and files within them.

Sort—Sort the contents of the selected folder by name, date, format, or size.

Add folder—Create a new folder.

Memory status—Check the available memory for the device handset.

Activation key list—View the list of available activation keys. You can delete

activation keys if desired.

Mark or Unmark—Mark or unmark folders to be deleted or moved.

Mark all—Mark all folders to be deleted.

■Fun frames and clip art

In the gallery, you can select photos and clip art and save them as screen savers

and wallpaper. To personalize photos, clip art, screen savers, and wallpaper add

your own text, add a frame, change the size of an image, and adjust the contrast.

Select Menu > Gallery > Memory card > Images > Options > Edit image >

Options > Insert text, Insert frame, Insert clip-art, Insert image, or Crop image.

When adding text, you can select the font style, size, and colour, and rotate the

font.

Media

8. Media

■Camera

You can take photos and record video clips with the built-in 2.0 megapixel

camera. The camera lens is on the back of the phone. The camera produces

pictures in JPEG format and video clips in 3GP format.

When taking and using images or video clips, obey all laws and respect local

customs as well as privacy and legitimate rights of others.

Your device supports image capture resolutions of up to 1600 x 1200 pixels. The

image resolution in these materials may appear different.

If there is not enough memory to take a new photo, delete old photos or other

files in the gallery, or move photos to a microSD card. See "MicroSD card," p. 18.

Keep a safe distance when using the flash. Do not use the flash on people or

animals at close range. Do not cover the flash while taking a picture.

Take a photo

Select Menu >Media > Camera. To take a photo, select Capture. Photos are saved

in the Images folder of the gallery. To take another photo, select Back; to send

the photo, select Send. To view the options, select Options.

Record a video clip

Select Menu >Media > Camera > Options > Video. Select Record to begin

recording the video clip. Select Pause to pause, Continue to resume, or Stop to

stop the recording. Video clips are saved in the Video clips folder of the gallery

menu.

Camera options

Select Menu >Media > Camera > Options and from the following:

Still image or Video—Choose Still image to take a picture or Video to record a

video.

Mute audio or Unmute audio—Turn the sound on or off for the video clip.

Night mode on or Night mode off—Switch the camera night mode on and off.

Flash on or Flash off—Turn the camera flash on and off.

Media

Self-timer on or Self-timer off—Turn the self-timer on and off with still images.

Img. sequence on or Img. sequence off—Turn image sequencing on or off. The

pictures are then saved to the gallery. This option only appears in still image

mode.

View previous—View the previous photo or video taken. This option only appears

when a photo has been taken during that session.

Open Gallery—Open the Gallery to view saved images, videos, and recordings.

Settings—Change the settings for the phone camera.

■Media player

With the media player you can download, view, and play compatible images,

audio and video files, and animated images from a variety of sources.

The media player enables you to play streaming videos and streaming audio from

a network server. Streaming functionality is a network service and requires

network support. Check the availability of these services, pricing, and tariffs with

your network operator or the service provider whose service you want to use.

network operators will also give you instructions on how to use their services.

In the standby mode, select Menu > Media > Media player > Online media >

Open Gallery, Go to address, or FF/Rew interval.

Online media—Connect to the operator’s network. This is a network service.

Check with your network operator for pricing and information.

Open Gallery—Open the Gallery. From Gallery, you can play stored audio and

video files.

Go to address—Connect to a web address.

FF/Rew interval—Set the fast forward and rewind interval to 10 seconds, 20

seconds, 30 seconds, or set an interval.

■Music player

Your phone includes a music player for listening to music or other tracks in MP3

or AAC format. You can transfer files from a PC to your phone using a USB data

cable connection. To transfer music tracks from a compatible PC and manage the

music tracks and track lists, see instructions for the application in the Nokia PC

Suite online help. See Data cable transfer, p. 61; Infrared connectivity, p. 60; and

Bluetooth wireless technology, p. 57 for more information on transferring music

tracks to your phone.

Media

Note: Only files protected by DRM can be used as ringtones.

Files stored in the Music files folder of the Gallery are automatically detected and

added to the default playlist. Music files stored elsewhere, such as a microSD

card, must be defined in a track list before listening to them. Listen to sound files

through a compatible headset or the phone loudspeaker. Calls can be made or

answered while using the music player. During a call, the playback is paused.

When the call ends, the music player restarts where it left off.

Play music tracks

In the standby mode, select Menu > Media > Music player. If there are no music

files in the Music files folder, you can select another folder before entering the

Music player. The details of the first track on the default track list are shown.

To use the graphical keys, , , , or , on the display, scroll left or

right to the desired key, and select it.

Play track—To play a track, select .

Adjust volume—To adjust the volume level, use either the volume key or the left

and right selection keys.

Stop track—To stop the playing, select or press and hold the end key.

Skip tracks—To skip to the beginning of the next track, select . To skip to the

beginning of the previous track, select twice.

Rewind or fast forward—To rewind the current track, select and hold . To

fast forward the current track, select and hold . Release the key at the

position you want.

Warning: Listen to music at a moderate level. Continuous exposure to

high volume may damage your hearing.

Music player options

Select Menu > Media > Music player > or other music folder > Options and one

of the following options:

Note: Some features may not be available, depending on your network.

For more information, contact your wireless provider.

Play via Bluetooth—Connect to a Bluetooth device to play music.

Show tracks—View all the tracks available on a track list. To play a track, highlight

the track, and select Play. Select Options > Send to send the music file. Select

Media

Options > Refresh all tracks to refresh the track list (for example, after adding

new tracks to the list). Select Options > Change track list to change the track list

that is shown when you open the Music player menu, if several track lists are

available in the phone.

Play options—Select Random to play the tracks on the track list in random order.

Select Repeat to play the current track or the entire track list repeatedly. Select

Music source > Default folder or Select folder to change the folder currently used

by the music player.

Media equalizer—The equalizer enhances the sound quality when using a headset

(only) with the Music player by amplifying or attenuating frequency bands. There

are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two

customizable settings.

Warning: When using the stereo headset your ability to hear outside

sounds may be affected. Do not use the stereo headset where it can

endanger your safety.

Send—Send music files to a compatible device using infrared or Bluetooth.

Memory status—View used and free memory of the phone and memory card.

■Radio

Warning: Listen to music at a moderate level. Continuous exposure to

high volume may damage your hearing. Do not hold the device near

your ear when the loudspeaker is in use, because the volume may be

extremely loud.

Your phone has an FM radio that also functions as an alarm clock radio. To listen

to the FM radio on your phone, connect a compatible music stand, a 2.5 mm

headset, or stereo headset. The FM radio uses the wire of the headset as an

antenna. A compatible headset needs to be attached to the device for the FM

radio to function properly. The quality of a radio broadcast depends on coverage

of the radio station in that particular area.

Select Menu > Media > Radio. To use the graphical keys, , , , or

on the display, scroll left or right to the desired key, and select it. To change the

volume, press the volume keys.

■Save radio channels

1. To start the channel search, select and hold or . To change the radio

frequency in 0.1 MHz steps, briefly press or .

Media

2. To save the channel to a memory location 1 to 9, press and hold the

corresponding number key. To save a channel to a memory location 10 to 20,

briefly press 1 or 2, then press and hold the desired number.

3. Enter the name of the channel, select OK.

When an application using a browser connection is sending or receiving data, it

may interfere with the radio.

When you place or receive a call, the radio automatically mutes. Once the call is

ended, the radio switches back on.

■Listen to the radio

Select Menu > Media > Radio. To scroll to the desired channel, select or

, or press the headset key. To select a radio channel location, briefly press the

corresponding number keys.

Select Options and from the following options:

Switch off—Turn off the radio.

Save station—Enter a name for the channel, and select OK. Select one of 20

locations to save the channel location.

Stations—Select from list of current saved channels on your phone. Select

Options > Delete station to clear channels or Options > Rename to rename

channels.

Mono output or Stereo output—Listen to the radio in monaural mode or in stereo

(default). Stereo output is available through a stereo enhancement.

Headset or Loudspeaker—With the headset attached, listen to the radio through

a headset or the loudspeaker.

Set frequency—Manually enter the frequency of a known radio station, and select

OK. You can also press * to set a frequency.

You can normally make a call or answer an incoming call while listening to the

radio. During the call, the volume of the radio is muted.

■Voice recorder

You can record pieces of speech, sound, or an active call for up to 3 minutes. The

recorder cannot be used when a data call is active.

Media

Record speech or sound

1. Select Menu > Media > Voice recorder.

2. To start the recording, select the record virtual button. To start the recording

during a call, select Options > Record. While recording a call, all parties to the

call hear a faint beeping sound about every 2 seconds. When recording a call

hold the phone in the normal position near your ear.

3. To end the recording, select the stop virtual button. The recording is saved in

Gallery > Recordings.

4. To listen to the latest recording, select Options > Play last recorded.

5. To send the last recording using a multimedia message, Bluetooth

technology, or IR, select Options > Send last recorded.

■Equalizer

The equalizer enhances the sound quality when using Music player by amplifying

or attenuating frequency bands. There are five preset equalizer settings (Normal,

Pop, Rock, Jazz, and Classical) and two customizable settings.

Activate an equalizer set

Select Menu > Media > Equalizer, scroll to the desired equalizer setting, and

select Activate. Select Options > View to display the equalizer settings.

Create a custom equalizer set

1. Select Menu > Media > Equalizer.

2. Highlight a customizable setting, and select Options > Edit.

The selected set appears in the display with the bar on the far left highlighted.

The bars adjust frequencies, from the lowest (the far left bar) to the highest

(the far right bar). The higher the indicator on a particular bar, the more that

frequency is amplified.

3. Scroll to adjust the frequencies. Select Save.

4. To rename the setting, select Options > Rename, enter a new name, and

select OK.

5. To activate the setting, select Activate.

Settings

9. Settings

Use this menu to change profiles, display settings, themes, tone settings, time

and date settings, call settings, phone settings, voice commands, connectivity

settings, enhancement settings, security settings, application settings, network

settings, network services, restore factory settings, and phone details.

■Profiles

Profiles define how your device reacts when you receive a call or message and

how your keypad sounds when you press a key. You can leave ringing options,

keypad tones, and other settings for each of the available profiles at their default

setting, or customize them to suit your needs.

Profiles are also available for enhancements such as the headset and car kit. See

"Enhancements," p. 66.

To activate a profile, select Menu > Settings > Profiles > General, Silent, Meeting,

Outdoor, (My profile 1), or (My profile 2) > Activate.

Personalize a profile

You can personalize any of the profiles in various ways.

1. Select Menu > Settings > Profiles.

2. Select the profile you want to personalize.

3. Select Personalize and the option you want to personalize.

Set a timed profile

You can use timed profiles to prevent missed calls. For example, suppose you

attend an event requiring your device set to Silent before the event starts, but

you forget to return it to General until long after the event. A timed profile can

prevent missed calls by returning your device to the default profile at a time you

specify. You can set timed profiles up to 24 hours in advance.

1. Select Menu > Settings > Profiles.

2. Select the profile you want to activate and Timed for timed expiration.

3. Enter the time in hh:mm format for the profile to expire, and select OK.

Settings

■Display

Standby mode settings

You can choose settings for the display of the standby screen on the display.

Wallpaper

Select Menu > Settings > Display > Standby mode settings > Wallpaper and one

of the following:

On—Activate wallpaper on your phone.

Off—Deactivate wallpaper on your phone.

Image—Choose an image from the gallery for wallpaper. Select Open to browse

the Images folder. Select the image of your choice.

Slide set—Choose a slide set from the gallery for wallpaper. Select Open to

browse the Images folder. Select the slide set of your choice.

Font colour

To set the font colour of your phone when in the standby mode, select Menu >

Settings > Display > Standby mode settings > Standby font colour. Scroll to

select a colour from the colour grid.

Screen saver

To choose a screen saver for the main display, select Menu > Settings > Display >

Screen saver and one of the following:

On—Activate the screen saver on your phone.

Off—Deactivate the screen saver on your phone.

Screen savers > Image, Video Clip, Slide set, Digital clock, or Open Camera— an

image, video clip, or other option to act as your screen saver.

Time-out—Modify the idle time before the screen saver activates.

Power saver is automatically activated after the time-out of the screen saver to

optimize battery life.

Sleep mode

The sleep mode is a power-saving feature that turns the phone display off during

inactivity. Select Menu > Settings > Display > Sleep mode. When sleep mode is

Settings

activated, the display is completely blank, but the phone is still active. Press any

key to restore the display.

Backlight time-out

To control the time-out of the backlight on your phone, select Menu > Settings >

Display > Backlight time-out.

■Themes

A theme contains many elements for personalizing your phone, such as wallpaper,

screen saver, colour scheme, and a ringing tone.

Themes automatically loads wallpapers, screen savers, ringing tones and

background colours. Selecting a theme over-writes previous settings. Individual

settings for a theme can be overwritten independently in the settings menu. For

example, a theme selects a wallpaper, a screen saver, and a default ringing tone.

The default ringing tone within a theme can be overwritten. See "Tone settings,"

p. 52.

1. Your phone has a default theme. To choose the theme on your display, select

Menu > Settings > Themes > Select theme > Themes.

2. Scroll to a theme, and select OpenApply theme.

■Tone settings

You can adjust the ringing volume, keypad tones, and more for the active profile.

See "Personalize a profile," p. 50 for more information on profile settings.

Select Menu > Settings > Tones and one of the following:

Incoming call alert—Select how the device notifies you of an incoming call.

Ringing tone—Select the ringing tone for incoming calls.

Incoming call video > Incoming call video off or Incoming call video on—Indicate

whether to replace the default audio ringing tone with the selected video.

Ringing volume—Set the volume of your ringing tone.

Vibrating alert > On or Off—Set the vibrating alert.

Message alert tone—Select the tone for received messages.

Keypad tones—Set the volume of your keypad tones (or turn them off).

Warning tones > On or Off—Set warning and confirmation tones.

Settings

Alert for—Define which caller groups the selected profile will accept or decline.

See "Caller groups," p. 37.

■Time and date settings

Clock

Select Menu > Settings > Time and date > Clock > Show clock, or Hide clock, Set

the time, Time zone or Time format.

Date

Select Menu > Settings > Time and date > Date > Show date or Hide date, Set the

date, Date format, or Date separator.

Date and time auto-update

Auto-update is a network service. See "Network services," p. 6. If your network

operator supports this feature, you can allow the digital network to set the clock,

which is useful when you travel to another network or time zone.

Select Menu > Settings > Time and date > Auto-update of time > On, Confirm

first, or Off.

If you use the Auto-update of time option while outside the digital network, you

may be prompted to enter the time manually. Network time replaces the time

and date when you reenter your digital network.

If your battery has been removed or has discharged outside the digital network,

you may be prompted to enter the time manually (when the battery is replaced or

recharged, and you are still outside of the digital network).

■Call settings

Location info sharing

Location info sharing is available for the Nokia 6275i device. Location info

sharing is a network service. See "Network services," p. 6.

If your wireless service provider supports this feature, then location info sharing

allows the device to share position information over the network. For calls to

emergency numbers, this position information may be used by the emergency

operator to determine the position of the device. The functionality and accuracy

of this feature are dependent on the network, satellite systems, and the agency

Settings

receiving the information. This feature may not function in all areas or at all

times.

In the standby mode, select Menu > Settings > Call > Location info sharing >

Emergency or On.

Emergency—This is the default profile. The device location information is shared

only during an emergency call to the official emergency number programmed

into your device. The screen displays in the upper left hand corner in the

standby mode.

On—The device location information is shared with the network whenever the

device is powered on and activated. The screen displays in the upper left

hand corner in the standby mode.

Location information will always be shared with the network during emergency

calls to the official emergency number programmed into the device, regardless of

which setting is selected. After placing an emergency call the device remains in

emergency mode for 5 minutes. During this time, the location information will be

shared with the network. See "Emergency calls," p. 97.

Anykey answer

Anykey answer enables you to answer an incoming call. Briefly press any key

except the right selection or end key. In the standby mode, select Menu >

Settings > Call > Anykey answer > On or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy

signal when you dial. With automatic redial activated, your device redials the

number (number of times is specified by the network), and notifies you when the

network is available. In the standby mode, select Menu > Settings > Call >

Automatic redial > On or Off.

1-touch dialing

You can activate or deactivate 1-touch dialing. In the standby mode, select

Menu > Settings > Call > 1-touch dialing > On or Off.

Settings

Automatic service update

Your device is capable of receiving updates to wireless services sent to your

device by your network operator. In the standby mode, select Menu > Settings >

Call > Auto-service update > On or Off.

Calling cards

If you use a calling card for long distance calls, save the calling card number in

your phone. The phone can store up to four calling cards. Contact your calling

card company for more information.

Save information

1. In the standby mode, select Menu > Settings > Call > Calling card.

2. Enter your security code, and select OK. See "Security," p. 66.

3. Scroll to the calling card of your choice, and select Options > Edit > Select >

Dialling Sequence.

4. Select one of the following sequence types:

Access+phone+card—Dial the access number for the calling card, the phone

number, then enter the card number (plus PIN if required).

Access+card+phone—Dial the access number for the calling card, card

number (plus PIN if required), then enter the phone number.

Prefix+phone+card—Dial the prefix (numbers that must precede the phone

number) and phone number, then enter the card number (plus PIN if

required).

5. Enter the required information (access number or prefix and card number),

and select OK to confirm your entries.

6. Select Card name > enter the card name > OK.

Select a calling card

You can select one of the calling cards for which you have saved information. The

selected card information is used when you make a card call.

1. In the standby mode, select Menu > Settings > Call > Calling card.

2. Enter your security code, and select OK. See "Security settings,"p. 80.

3. Scroll to the calling card of your choice, and select it.

Settings

Make card calls

After you have selected a calling card, make a card call.

1. Enter the phone number, including any prefix (such as 0 or 1) that your

calling card may require when you make a calling card call. See your calling

card for instructions.

2. Press and hold the send key for a few seconds until Card call is displayed.

3. Follow the instructions on the screen.

4. When you hear the tone or system message, select OK.

International prefix

You can store an international dialling prefix into your device. In the standby

mode, select Menu > Settings > Call > International prefix. In the standby mode,

when you enter + (press * twice) at the beginning of a phone number, your device

automatically inserts the international dialling prefix that you have stored after

you press the call key. See "Insert dialing codes," p. 32.

Data or fax calls

Data and fax calling is a network service. See "Network services," p. 6. If your

network operator supports this feature, you can set up the device to send or

receive data and fax calls with a terminal, such as a PDA or PC, connected.

For better performance during data calls, place the device on a stationary

surface. Do not move the device or hold it in your hand during a data call.

For more information on connectivity, refer to the PC/PDA Connectivity Guide

which can be downloaded from the Nokia website at http://www.nokia.com/us.

1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Rcvd.

data/fax call and one of the following options:

Normal—The device receives incoming calls as usual.

Data calls only—The device receives only data calls.

Fax calls only—The device receives only fax calls.

2. When finished with receiving the fax or data call, repeat steps 1 and 2, and

select Normal.

Settings

Data transfer

To view the transmission speed when sending or receiving data and fax calls. In

the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate

display > Graphic or Off.

Call summary

Your device can display the time spent on a call when you hang up. In the standby

mode, select Menu > Settings > Call > Call summary > On or Off.

Show call time

To see the call time on the display screen after each call, select Menu > Settings

> Call > Show call time displ. > On or Off.

Ringing tone for no caller ID

You can select a different ringing tone for calls received with no caller ID. In the

standby mode, select Menu > Settings > Call > Ringtone no caller ID > On or Off.

■Phone settings

Language settings

The phone language affects the time and date formats of the clock, and alarm

clock. In the standby mode, select Menu > Settings > Phone > Phone language

and the language of your choice.

The writing language selects the language used for messaging, calendar, notes,

and To-do lists. In the standby mode, select Menu > Settings > Phone > Writing

language and the language of your choice.

Automatic keyguard

You can set the keypad of your device to lock automatically after a preset time delay.

1. In the standby mode, select Menu > Settings > Phone > Automatic

keyguard > On or Off.

2. If you select On, Set delay: is displayed.

3. Enter the delay time (in mm:ss format), and select OK.

When keyguard is on, it may be possible to dial the emergency number programmed

into your device.

Settings

Navigation key

If supported by your wireless service provider, you can set the features that are

activated when you press the scroll key.

1. In the standby mode, select Menu > Settings > Phone > Navigation key.

2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select

Change.

3. Select a function to assign to the action.

Memory status

You can view the size of memory available on your device. In the standby mode,

select Menu > Settings > Phone > Memory status.

You can view the size of memory available for application installations. In the

standby mode, select Menu > Extras > Memory.

DTMF tones

DTMF tones, are the tones that sound when you press the keys on your device

keypad. You can use DTMF tones for many automated dial-up services such as

banking and airlines or for entering your voice mailbox number and password.

DTMF tones are sent during an active call. You can send them manually from your

device keypad, or send them automatically by saving them in your device.

Set type

In the standby mode, select Menu > Settings > Phone > DTMF tones > Manual

DTMF tones and one of the following options:

Continuous—Used to set the tone sound for as long as you press and hold a key.

Fixed—Used to send tones of the duration you specify in the DTMF tone length

option.

Off—Used to turn off tones. No tones are sent when you press a key.

Set length

You can specify touch-tone length for the Fixed option. In the standby mode,

select Menu > Settings > Phone > DTMF tones > DTMF tone length >

Short (95 ms) or Long (350 ms).

Settings

Start-up tone

You can select to have a start-up tone when you first turn on your device. In the

standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 14 seconds, and wait for the help text to be

displayed. If necessary, use the scroll key to page through the full help text.

The default setting for help text is On. However, you can turn help text on or off.

In the standby mode, select Menu > Settings > Phone > Help text activation.

■Voice commands and voice tags

Before using voice tags, note the following:

• Voice tags are not language-dependent, but depend on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags, and use them

in a quiet environment.

• Very short names are not accepted. Use long names, and avoid similar names

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely on voice dialling in all circumstances.

Hands-free operation

You can set as many as 16 voice commands to enable hands-free operation of

certain features in your device.

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device function.

1. Select Menu > Settings > Voice commands.

2. Select the device function you want to tag: Profiles, Messages, Infrared, Voice

recorder, or Log.

3. If necessary, select an option associated with that function.

4. Select Start, and speak the voice tag clearly into the microphone. Do not

select Quit unless you want to cancel the recording.

Settings

The device replays and saves the recorded tag. appears next to commands

with assigned voice tags.

Activate a voice command

After you have associated a voice tag with a function in your device, to issue a

command, speak the voice tag.

1. In the standby mode, press and hold the right selection key or voice key.

2. With Speak now displayed, pronounce the voice tag clearly into the microphone.

With the voice tag found, the device displays Found:, and plays the recognized

voice tag through the earpiece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can select one of the

following options:

Play—Press the center selection key to listen to the voice command tag.

Change—Select Options > Change to change the voice command.

Delete—Select Options > Delete to erase the voice command tag.

■Connectivity

You can connect the phone to a compatible devices using infrared (IR)

connection, or Bluetooth wireless technology. You can also connect the phone to

a compatible PC using IR or a USB data cable; and use the phone as a modem to

enable connectivity from the PC.

For more information, see the Nokia PC Suite online help. Nokia PC Suite and all

related software can be downloaded from the U.S. Mobile Phone products

section of www.nokiausa.com/pcsuite.

Important: Only install and use applications and other software from

sources that offer adequate security and protection against harmful

software.

Bluetooth connectivity

Bluetooth technology connectivity enables cost-free wireless connections

between electronic devices and can be used to send and receive images, texts,

gallery files, voice recordings, videos, notes, business cards, and calendar notes. It

can also be used to connect wirelessly to products that use Bluetooth wireless

Settings

technology, such as computers. You can synchronize your phone and your PC

using Bluetooth connectivity.

Since devices with Bluetooth connectivity communicate using radio waves, your

phone and the other device do not need to be in direct line-of-sight.

The two devices only need to be within a maximum of 30 feet (10 meters) of each

other. The connection can be subject to interference from obstructions such as

walls or other electronic devices.

The Bluetooth wireless technology application whether used actively or in the

background, consumes the battery and reduces the operating time of the phone.

This device is compliant with Bluetooth Specification 2.0 and supports the

following profiles:

• Object push profile (OPP)

• File transfer profile (FTP)

• Dial-up networking profile (DUN)

• Generic object exchange profile (GOEP)

• Headset profile (HSP)

• Hands-free profile v. 1.0 (HFP)

• Generic access profile (GAP)

• Service Discovery Protocol (SDP)

• Serial port profile (SPP)

To ensure interoperability between other devices supporting Bluetooth

technology, use only enhancements approved by Nokia for this model. Check

with the manufacturers of other devices to determine their compatibility with

this device.

There may be restrictions on using Bluetooth technology in some locations.

Check with your local authorities or service provider. If you want more

information on this function, visit the Bluetooth Technology organization

website: https://www.bluetooth.org/.

Pairing

You can set up a permanent association (pairing) between your phone and

another device with Bluetooth technology. Some devices may require pairing

before data transfer can take place.

Settings

To pair with a device, you and the owner of the other device must agree on a pass

code of 1–16 numeric characters. The first time you try to connect the devices,

you must each enter the same pass code. Once the devices are paired, you will

not need to use the pass code again, so there is no need to remember it.

Paired devices are placed in your paired device list. You can view the list even

when Bluetooth connectivity is not active or when the devices in the list are not

available for connection.

Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options

and one of the following:

Assign short name—Give a nickname to the selected device (visible to you only).

Auto-conn. without confirmation—Select No if you want the phone to connect to

the selected device automatically or Yes if you want the phone to ask for your

permission first.

Delete pairing—Delete the pairing to the selected device.

Pair new device—Search for active devices with Bluetooth technology within

range, scroll to the desired device, and select Pair to establish pairing with that

device. Do not accept Bluetooth connectivity from sources you do not trust.

Bluetooth connectivity settings

To define how your phone is shown to other devices with Bluetooth connectivity.

Select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings and one

of the following:

My phone's visibility—Select Perm. visibil. to permanently show the phone to all

other devices with Bluetooth connectivity, Temp. visibil. to show the phone to all

other devices for two minutes only, or Hidden to show the phone only to the

paired devices. Operating the phone in hidden mode is a safer way to avoid

malicious software.

My phone's name—Change your phone name that is seen by other users.

Set up a connection

1. Select Menu > Settings > Connectivity > Bluetooth > On. The active

Bluetooth technology connection is indicated by at the top of the display.

2. Select Search for audio enhancements to search for compatible devices with

Bluetooth connectivity. The list of found devices appears in the display.

3. Select the desired device. If required, enter the Bluetooth connectivity pass

code of the device to complete the pairing.

Settings

4. If required, enter the Bluetooth connectivity pass code of the device to pair

with the device.

Your phone connects to the device. You can start data transfer.

To view the device you are connected to, select Menu > Settings >

Connectivity > Bluetooth > Active device.

To deactivate Bluetooth connectivity, select Menu > Settings > Connectivity >

Bluetooth > Off. Deactivation of the Bluetooth technology connection will not

affect other functions of the phone.

Send data

Instead of using the Connectivity menu, you can use other phone menus to send

various types of data to other devices with Bluetooth connectivity. For example,

you can send a video from the Video clip folder of the Gallery menu. See the

appropriate sections of the user guide for information about sending different

types of data.

Receive a data transfer

When a Bluetooth technology connection is active in your phone, you can receive

notes, business cards, videos, and other types of data transfers from another

device with Bluetooth connectivity. When you receive a data transfer, an alarm

sounds, and a message appears on the screen.

To view the transferred item immediately from the standby mode, select Show. To

view the item at a later time, select Exit.

Depending on the nature of the item, it is saved in the appropriate menu in your

phone. For example, a business card is saved in Contacts, and a calendar note is

saved in Calendar.

Infrared connectivity

You can set up the phone to receive data through its infrared (IR) port. To use an

IR connection, the device with which you want to establish a connection must be

IrDA compliant. You can send or receive data to or from a compatible phone or

data device (for example, a computer) through the IR port of your phone.

Warning: Do not point the IR beam at anyone’s eye or allow it to

interfere with other IR devices. This device is a Class 1 laser product.

When sending or receiving data, ensure that the IR ports of the sending and

receiving devices are pointing at each other and that there are no obstructions

between the devices.

Settings

To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.

To deactivate the IR connection, select Menu > Settings > Connectivity >

Infrared. When the phone displays Deactivate infrared?, select Yes.

If data transfer is not started within 2 minutes after the activation of the IR port,

the connection is cancelled and must be started again.

IR connection indicator

When is shown continuously, the IR connection is activated and your phone

is ready to send or receive data through its IR port. When blinks, your phone

is trying to connect to the other device or a connection has been lost.

Data cable transfer

You can transfer data from your phone to a compatible PC or from a compatible

PC to your phone using a CA-53 USB data cable.

Important: Disconnect the USB data cable from the phone to make a

call.

Enable default mode connection

Connect to your PC in Nokia mode to transfer phone data and files between your

phone and PC using Nokia PC Suite.

1. Connect your PC and your phone with a CA-53 USB data cable. A notification

appears on the display that asking which mode you want to select.

2. Select Accept > Nokia mode. A notification appears on the display stating a

connection is active.

You can now use PC Suite to connect to your phone.

Enable data storage connection

Connect to your PC in Data storage mode to transfer music, photo, and video files

to the phone microSD card, and from the phone microSD to your PC with

Windows Explorer.

1. Connect your PC and your phone with a CA-53 USB data cable. A notification

appears on the display that asking which mode you want to select.

2. Select Accept > Data storage. USB mode: Data storage is displayed while the

phone is in data transfer mode.

3. Open Windows Explorer. Your phone microSD card will appear as a local drive

(the device name), and with a drive letter assigned to it.

Settings

4. Click on the folders to display a window that shows the contents of the folder

on the phone microSD card.

5. Open a second instance of Windows Explorer and display the contents of the

folder on your PC where you have MP3 files, photo files, or video files stored.

6. Select the files on your PC that you wish to transfer to the phone.

7. Drag and drop the files from the second window into the first window and

place in a folder.

8. The files are transferred to the phone and can be played by the Music player

or accessed by the Media player.

If you selected a file or files that require more memory than can fit on the

available phone memory, you will get an error note. Deselect some of your

selected files until the required memory is less than or equal to the available

memory on your phone.

Disable data storage connection

1. To disable the USB data cable, double-click the green arrow on the task bar at

the bottom of your PC screen.

A window pops up that displays Unplug or Eject Hardware.

2. Click on USB Device in the Hardware devices window.

A popup window displays Stop a Hardware device.

3. Highlight USB device, and click OK.

The popup window, Safe to Remove Hardware, is displayed with The ‘USB

Device’ device can now be safely removed from the system.

4. Click OK.

Important: To ensure that all memory card operations are completed in

a controlled way, do not unplug the connectivity cable until Windows

notifies you that it is safe to do so. Uncontrolled completion or

unexpected disruptions of the memory card operations may cause the

memory card and the information stored on it to become corrupted. A

corrupted memory card may have to be formatted before it can be used

again. When a memory card is formatted, all information on the card is

permanently los

Settings

■Enhancements

Select Menu > Settings > Enhancements. You can select an enhancement menu

if the phone is or has been connected to a compatible enhancement type.

Depending on enhancement, select from the following options:

Default profile—Choose the profile you wish to be automatically activated when

a headset, car kit, or loopset is connected.

Automatic answer—Answer calls automatically after one ring when a headset,

car kit, loopset, or charger is connected. Select On or Off.

Lights (for Handsfree or Charger only)—Choose to keep the phone lights always

on, or to shut off automatically after several seconds. Select On or Automatic.

If the Loopset is connected and recognized through the Pop-Port™ connector, the

phone automatically uses the Loopset.

Text phone (network service)—Connect to a TTY/TDD device. Check with the

manufacturer of the TTY/TDD device for a connecting cable that is compatible

with your phone. Check with your service provider for availability and description

of services.

■Security

PIN code

The PIN code protects the UIM card from unauthorized access. The PIN code can

be 4–8 digits in length. After three successive incorrect entries, the PIN code is

blocked. You need to enter the personal unblocking key (PUK) code. See"Personal

unblocking key (PUK) code," p. 69.

Note: The PIN code must be obtained form your wireless service

provider. The PIN code is typically provided with your UIM card.

PIN code request

To provide extra security in case your phone is lost or stolen, enable your phone

to request the PIN code when powered on.

1. In the standby mode, select Menu > Settings > Security > PIN code request.

2. Enter the PIN code, and select OK.

3. Select On.

Settings

Call restrictions

Select call restrictions to block or allow numbers for incoming and outgoing calls.

With any numbers entered as allowed numbers, all those entered as blocked

numbers are ignored. With a number blocked, the phone blocks any call from it,

and send the caller to the voice mail.

1. In the standby mode, select Menu > Settings > Security > Call restrictions.

2. Enter the security code, and select OK. See "Security," p. 66.

3. Select the types of calls you want to restrict:

Restrict sent calls—Set restrictions on making calls.

Restrict rcvd. calls—Set restrictions on receiving calls.

4. Select whether to block or allow numbers:

Blocked numbers—Set the numbers the phone can only block, allowing all the

rest.

Allowed numbers—Set the numbers the phone can only call or receive,

blocking all the rest.

5. Select one of these options: Select, Add restriction (unavailable with memory

full), Edit (unavailable with no number added), or Delete (unavailable with no

number added).

Note: With restricted calls, you may still call the official emergency

number programmed into your device.

Security level

Your device can be set to different security levels to control device use and

memory settings. In the standby mode, select Menu > Settings > Security >

Security level. Enter your security code, and select OK and one of the following

options:

None—Disable security level protection.

Memory—Enable or disable memory protection.

Phone—Enable or disable phone protection.

Settings

Access codes

You can change your security code and PIN code. Avoid using codes similar to

emergency numbers such as 911 to prevent accidental dialling of the emergency

number.

Change security code

The security code controls access to features such as the security level and is

supplied with the phone. The preset code is 12345. When you change the security

code, keep the new code secret and in a safe place, separate from your phone

If you enter the wrong security code five times in succession, you will not be able

to enter a code for 5 minutes, even if you power off the phone between incorrect

entries.

1. In the standby mode, select Menu > Settings > Security > Access codes >

Change security code.

2. Enter the current security code (default is 12345), and select OK.

3. Enter the new security code (up to 10 characters), and select OK.

4. Enter the new security code again, and select OK.

Change PIN code

Before you can change your PIN code, you must enable PIN code request. See

"PIN code request," p. 66.

1. In the standby mode, select Menu > Settings > Security > Access codes >

Change PIN code.

2. Enter the current PIN code, and select OK.

3. Enter the new PIN code, and select OK.

4. Enter the new PIN code again, and select OK.

Voice privacy

Voice privacy is a network service. See "Network services," p. 6. If your wireless

service provider supports this feature, the voice privacy feature protects the

privacy of your current phone conversation from other callers placing phone calls

on your same network. In the standby mode, select Menu > Settings > Security >

Voice privacy > On or Off.

Settings

Personal unblocking key (PUK) code

The PUK code is used to restore a blocked PIN code. The PUK code is 8 characters

in length and cannot be changed. The PUK code must be obtained from your

wireless service provider.

Important: If you enter an incorrect PUK code 10 times in succession,

the UIM card is rejected and can no longer be used. You must contact

your wireless service provider for a new UIM card.

■Application settings

To change game and application settings, select Menu > Settings > App. settings

and one of the following:

Application sounds > On —Play sounds during an application.

Application lights > Application defined or Default—Play lights during an

application.

Application vibration > On—Vibrate the phone during an application.

Use of vibration can aggravate injuries. Do not turn vibration on if you have any

ailment in the bones or joints of your fingers, hands, wrist, or arms.

■Network

The menu options in your device depend on your network operator’s network.

Check with your network operator for more information.

The Network menu enables you to customize the way your device chooses a

network in which to operate while you are within or outside of your primary or

home system. Your device is set to search for the most cost-effective network. If

your device cannot find a preferred network, it selects a network automatically

based on the option you choose in the Network menu.

Select Menu > Settings > Network > Set mode > Home only, Automatic A, or

Automatic B.

■Network services

To activate network services in your phone, select Menu > Settings > Network

services and from the following options:

Network feature sett.—Activate network services in your phone using feature

codes received from your network operator.

Settings

■Restore factory settings

To reset some of the menu settings to their original values, select Menu >

Settings > Rest. factory sett.. Enter the security or lock code, and select OK. Data

that you have entered or downloaded is not deleted (for example, entries in your

contacts list are not affected).

Note: Depending on your wireless service provider, your device may

request the security code (defaulted to 12345) instead of the lock code.

■Phone details

To view the current details of your phone, select Menu > Settings > Phone details

and one of the following options:

User details—Show current number details.

Version details—Show the hardware, software, and browser version information

for the phone.

System details—Show the digital network the phone is on.

Icon details—Show the icons used.

Organizer

10. Organizer

Your phone contains features to help organize your everyday life, including an

alarm clock, calendar, calculator, countdown timer, and stopwatch.

■Alarm clock

Set an alarm

The alarm clock is based on the phone clock. An alarm sounds at the time you

specify, even if the phone is turned off.

1. Select Menu > Organizer > Alarm clock > Alarm time.

2. Enter the time for the alarm in hh:mm format, and select OK.

3. Select am or pm if 12-hour clock format is on.

Alarm on appears briefly in the display, and appears in the standby mode.

If you need to reset the alarm, select Menu > Organizer > Alarm clock > Alarm

time > On.

To turn off the alarm, select Menu > Organizer > Alarm clock > Alarm time > Off.

Repeat alarm

You can set the alarm to repeat every day or only on certain days of the week.

1. Select Menu > Organizer > Alarm clock > Repeat alarm > On.

2. Check the day or days of the week you wish to repeat the alarm, and select

Mark. Select Unmark to remove a day.

3. Select Done when you have added all desired days.

If you need to revise the days for a repeated alarm, select Menu > Organizer >

Alarm clock > Repeat alarm > Repetition days.

If you need to stop a repeated alarm, select Menu > Organizer > Alarm clock >

Repeat alarm > Off.

Set the alarm tone

To set which tone to play when the alarm sounds, select Menu > Organizer >

Alarm clock > Alarm tone > Standard, Radio, or Open Gallery.

Organizer

If you set your alarm to Radio, use an accessory that supports FM stereo.

Set the snooze time-out

You can set the Snooze time-out for the alarm.

Select Menu > Organizer > Alarm clock > Snooze time-out and a snooze time.

When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the

currently active profile), and lights up.

With the device on, select Stop to shut the alarm off or Snooze to interrupt the

alarm for 10 minutes. Snooze on appears in the display.

If you do not press a key, the alarm stops for the snooze time-out period, then

sounds again.

If you select Stop, the device asks whether you want to activate the phone for

calls. Select No to switch off the device or Yes to make and receive calls. Do not

select Yes when wireless phone use may cause interference or danger.

■Calendar

The calendar keeps track of reminders, calls you need to make, meetings, memo,

and birthdays. It can even sound an alarm for any of these events.

The default monthly view provides an overview of the selected month and weeks.

You can also jump to a specific date. Any days or dates that appear in bold font

contain calendar notes such as a meeting or reminder. A short summary of notes

for the day appear at the bottom of the screen.

Open calendar

Select Menu > Organizer > Calendar.

Scroll to move the cursor in the calendar view.

Calendar options

Select Menu > Organizer > Calendar > Options and one of the following:

Week view—View your calendar by weeks. To return to month view select Back

while in the Week view.

Make a note—Create a note on the selected date.

Go to date—Jump to a specific date. Enter the date (for example, 15/07/2005),

and select OK.

Organizer

Go to today—Jump to the current date.

Settings—Modify the calendar settings.

Go to to-do list—Go directly to your to-do list.

Delete all notes—Delete all calendar notes. This option appears only if a calendar

note has been created.

Make a calendar note

You can make a calendar note for a specific date. You can choose from five types

of notes. Your phone asks for further information depending on which note you

select. You can also set an alarm for your note.

1. Select Menu > Organizer > Calendar.

2. Scroll to the date for which you want to make a note. Scroll or select

Options > Go to date, and select a date.

3. Select Options > Make a note and one of the following

Meeting—Enter the subject, and select Save. Enter a location, and select Save.

Enter a start and end time. Select an alarm option.

Call—Enter the phone number, and select Save. Enter a name, and select

Save. Enter a time. Select an alarm option. You can also select Options >

Search to search your contacts.

Birthday—Enter the person’s name, and select Save. Enter the year of birth.

Select an alarm option.

Memo—Enter the subject, and select Save. Enter a start and end date. Select

an alarm option.

Reminder—Enter the reminder, and select Save. Select an alarm option.

View calendar notes (day view)

You can view the calendar notes for a day.

1. Select Menu > Organizer > Calendar.

2. Scroll to the date you want to view or select Options > Go to date. Days with

notes appear in bold type.

3. Select View to see the list of notes for that day.

Organizer

To view a specific note, scroll to the note, and select View again. If there are no

notes for that date, select Add note to create a new calendar note.

Options while viewing a day

When viewing the list of notes for a day, you can scroll to a note, select Options

and one of the following:

Make a note—Create a new note for the selected date.

Delete—Delete the note.

Edit—Edit the note.

Use detail—Use a detail contained in the note.

Move—Move the note to another date on your calendar.

Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly,

monthly, and yearly). Repeat is not available for Birthday note.

Go to date—Jump to another date on your calendar.

Go to today—Return to the current date.

Send note > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send a

calendar note in calendar format (vCal), in a text message, in a multimedia

message, or directly to another device.

Copy—Copy the note. You can paste the note to another date.

Settings—Modify the calendar settings.

Go to to-do list—Go directly to your to-do list.

Receive a calendar note

When you receive a calendar note in calendar-to-calendar format (vCal), your

phone displays Calendar note received.

Select Show to view the calendar note. Select Save to save the note to your

calendar or Options > Discard to discard the note.

Modify calendar settings

Select Menu > Organizer > Calendar > Options > Settings and one of the

following:

Set the date—Enter the current date, and select OK. Appears only when the date

has not yet been set.

Organizer

Set the time—Enter the current time, and select OK. Appears only when the time

has not yet been set.

Time zone—Select your current time zone.

Date format—Select your preferred date format.

Date separator—Select your preferred date separator.

Time format—Select your preferred time format.

Default view—Select a monthly or weekly view.

Week starts—Select the day the week starts.

Auto-delete notes—Select when to delete past notes.

■Notes

You can write text notes with the Notes. You can also send notes using text

messaging, infrared, or Bluetooth connectivity.

Select Menu > Organizer > Notes to see your current list of notes. If there are no

notes, select Add to create a note. If there are existing notes, scroll to a note, and

select View. Create your note, and select Save.

To write additional notes, select Menu > Organizer > Notes > Options > Make a

note. Create your note, select any note options, and select Save.

When you create a note, the following options are available:

Insert time & date—Adds the time and date to your note.

Close—Returns you to the notes list.

Insert smiley—Inserts a smiley into your message.

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary. This option is displayed only when

predictive text is on.

Insert symbol—Inserts a special character into your message. Option only appears

when predictive text is on.

Writing language—Choose the language you want to use.

Prediction on or Prediction off—Turn predictive text on or off.

Matches—View matches found in the predictive text dictionary for the word you

want to use. This option is displayed only when predictive text is on.

Organizer

Send a note

Select Menu > Organizer > Notes, scroll to the note you wish to send, and select

Options > Send note > Send as message, Via infrared, or Via Bluetooth to send

the note in a text message, in a multimedia message, or directly to another

device.

Notes options

Select Menu > Organizer > Notes > Options and one of the following:

Make a note—Create a new note.

Delete—Delete the note you selected.

Edit—Edit the note you selected.

Use detail—Use a detail contained in the note.

Send note > Send as message, Via infrared, or Via Bluetooth—Send a note in a

text message, in a multimedia message, or directly to another device.

Delete all notes—Delete all notes.

The note options appear only when you have created one or more notes.

■To-do list

Use the To-do list feature to keep track of your tasks. You can save a task or

errand as a to-do list note, select a priority level for the to-do list note, and mark

it as done when you have completed it. You can sort the to-do list notes by

priority or by date.

Select Menu > Organizer > To-do list. The current to-do list is displayed.

If there are no to-do tasks, select Add to create your first to-do list note. If there

are existing to-do list notes, scroll to a to-do list note, and select View.

Select Menu > Organizer > To-do list > Options > Add. Enter the subject, and

select Save > High, Medium, or Low.

To write additional notes, select Menu > Organizer > To-do list > Options > Add.

Enter the subject, and select Save > High, Medium, or Low.

When you create a to-do list note, the following options are available:

Search—Search for existing notes.

Insert smiley—Insert a smiley into your message.

Organizer

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary. These options are displayed only when

predictive text is on.

Insert symbol—Insert a special character into your message. Insert symbol is

displayed only when predictive text is on.

Writing language—Choose the language you want to use.

Prediction on or Prediction off—Turn predictive text on or off.

Matches—View matches found in the predictive text dictionary for the word you

want to use. This option is displayed only when predictive text is on.

To edit the notes, select Menu > Organizer > To-do list > View > Edit. Edit the

subject, select Save.

To view to-do list notes, select Menu > Organizer > To-do list > View > Options,

and one of the following choices:

Deadline—Change the deadline of the to-do list note.

Mark note as done or Mark as not done—Indicate whether the to-do list note is

completed or not.

Delete—Delete the to-do list note.

Use detail—Use a detail contained in the note.

Edit priority—Change the priority to High, Medium, or Low.

Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the

to-do list note.

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do list note to your calendar.

Send a to-do list note

To send the to-do list note in calendar format (vCal), in a text message, in a

multimedia message, or directly to another device, select Menu > Organizer >

To-do list, scroll to the note you wish to send, and select Options > Send > Send

as message, Via calendar, Via infrared, or Via Bluetooth.

To-do list options

Select Menu > Organizer > To-do list > Options and one of the following:

Add—Create a new to-do list note.

Delete—Delete the to-do list note you selected.

Organizer

Mark note as done or Mark as not done—Indicate whether the to-do list note is

completed or not.

Use detail—Use a detail contained in the note.

Sort by deadline or Sort by priority—Sort the to-do list by either date or priority.

Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the

to-do list note in calendar format (vCal) in a text message, in a multimedia

message, or directly to another device.

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do list note you selected to your calendar.

Delete done notes—Delete the to-do list note you selected from your calendar.

Delete all notes—Delete all the to-do list notes.

The to-do list options appear only when you have created one or more notes.

■Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root, changes the sign of the number entered, and

converts currency values.

Note: This calculator has a limited accuracy and is designed for simple

calculations.

To use the calculator. do the following:

1. Select Menu > Organizer > Calculator.

2. Enter the first number in the calculation.

Press # for a decimal point if necessary.

Press the scroll key up or down to change the sign of your number or value.

Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)

characters. Pause briefly to select the displayed character.

3. Enter the second number in your calculation.

4. Select Equals.

To perform a square or square root calculation, select Options > Square or Square

root.

Organizer

■Currency converter

You can convert foreign currency to domestic, or vice versa, directly from the

standby mode or from the Calculator menu.

Note: When you change base currency, you must enter the new rates

because all previously set exchange rates are set to zero.

1. Select Menu > Organizer > Calculator > Options > Exchange rate > Foreign

units in home units or Home units in foreign units.

Foreign units in home units—The number of home units it takes to make one

unit of foreign currency.

Home units in foreign units—The number of foreign units it takes to make one

unit of your home currency.

2. Enter the exchange rate (press # to insert a decimal), and select OK.

3. Select Back to return to the Calculator screen, and enter the currency amount

to convert.

4. Select Options > To home or To foreign.

To home—Converts foreign currency to domestic currency.

To foreign—Converts domestic currency to foreign currency.

5. If you have not already entered an exchange rate, the device prompts you to

enter it. Select OK. You can edit the exchange rate at any time.

■Timers

Your device contains two event timers: a normal timer that counts down a set

interval, and an interval timer that counts up set intervals.

The timers only work when the phone is on. Once you turn off your phone, the

timers are no longer active.

Normal timer

This countdown timer enables you to enter a specific duration (up to 99 hours,

59 minutes, and 59 seconds). When the time runs out, your device sounds an

alarm.

To set the normal timer, do the following:

1. Select Menu > Organizer > Timer > Normal timer.

Organizer

2. Enter the time (in hh:mm:ss format), and select OK.

3. Enter a note for the timer, and select Start.

and the timer (in hh:mm:ss format) appear in the standby mode when the

countdown timer is running.

When the time runs out, your phone sounds an alarm, vibrates, and flashes its

lights. If you are in standby mode, select Restart or Exit. If you are not in the

standby mode, press any key during the alarm to stop the timer.

After 60 seconds the timer alert expires automatically. Select Exit or press the

end key to clear the timer note.

To change the time:

1. Select Menu > Organizer > Timer > Change time.

2. Enter the new time, and select OK.

3. Leave the note as it was, or enter a new note, and select Start.

To stop the timer before the alarm sounds, select Menu > Organizer > Timer >

Stop timer.

Interval timer

The interval timer in your device allows you to store multiple interval timers. You

can define and store up to 10 timing periods for each interval timer. Once at least

one interval timer is set and stored, you can select the interval timer and one of

the stored intervals for that timer. When the selected interval expires, your phone

sounds an alarm, vibrates, and flashes its lights.

To set an interval timer, do the following:

1. Select Menu > Organizer > Timer > Interval timer.

2. Select Add new timer. This option only appears if you have already created an

interval timer.

3. Enter a name for the timer, and select Save.

4. Enter a name for the first timer period, and select Save.

5. Enter the desired time interval, and select OK.

6. Select an existing stored period and Edit period, Add period, Delete period, or

Start timer.

To use an interval timer:

Organizer

1. Select Menu > Organizer > Timer > Interval timer, and one of the set interval

timers. Add new timer is the only choice if you have not yet set any interval

timers.

2. Select Start timer, View timer, Edit timer, Add new timer, or Delete timer.

These options only appear if you have already created an interval timer.

■Stopwatch

Your phone has a stopwatch that can be used to track time. The stopwatch

displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss

format.

Using the stopwatch or allowing it to run in the background when using other

features increases the demand on battery power and reduces the battery life.

Measure split or lap time

Use the split time or lap time functions for activities where you need to pace

yourself. To measure split or lap times, do the following:

Split timing—Use the split time function for such activities as a long distance

race when you need to pace yourself. Select Split to note the lapsed time. The

timer continues to run and the split time appears below the running time. Each

time you select Split, the new measured time appears at the beginning of the list.

The maximum number of splits is 20.

Lap timing—Use the lap time function when you want to track how long it takes

to complete each cycle or lap. Select Lap to note the lap time. The clock stops,

then immediately restarts from zero. The lap time appears below the running

time. Each time you select Lap, the new measured time appears at the beginning

of the list. The maximum number of laps is 20.

1. Select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start.

2. Select Stop to end timing and display total time.

Save a time

To save a time while the clock is running, select Stop > Save, enter a name for the

measurement, and select OK. If you do not enter a name, the total time is used as

the default title for the lap or split time.

Organizer

Stopwatch options

Select Menu > Organizer > Stopwatch and one of the following:

Continue—Continue to measure time and return to the stopwatch screen. This

option appears only if the clock is running.

Show last time—View the last measured time.

Split timing—Use the split time function.

Lap timing—Use the lap time function.

View times—Browse saved times.

Delete times > One by one or Delete all—Delete saved times.

Stop—Stop the clock.

Operation note

If you press the end key and return to the standby mode, the clock continues to

run in the background, and appears at the top of the screen.

Catalogs

11. Catalogs

Catalogs is a network service. Contact your wireless network operator for more

information. See "Network services," p. 6.

Mobile web

12. Mobile web

Mobile web is a network service. See "Network services," p. 6.

Your phone has a built-in browser you can use to connect to selected services on

the mobile internet. If your wireless service provider supports this feature, you

can view weather reports, check news or flight times, view financial information,

and much more. The web browser on your phone can display WAP-based content.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

internet site.

If the security indicator ( ) is displayed during a connection, the data

transmission between the device and the internet gateway or server is encrypted.

The service provider secures the data transmission between the gateway and the

content server.

Important: Use only services that you trust and that offer adequate

security and protection against harmful software.

■Mobile internet access

Because mobile internet content is designed to be viewed from your phone, your

wireless provider is now your mobile internet service provider as well.

Your wireless provider has created a home page and set up your browser to go to

this page when you log on to the mobile internet. Once at your service provider’s

home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your phone.

Normally this is done by your wireless provider when you subscribe to the

feature. Contact your wireless provider if you have problems using the browser.

■Sign on to the mobile internet

Select Menu > Mobile web.

After a brief pause, your phone attempts to connect to your wireless provider’s

home page. If you receive an error message, your phone may not be set up for

browsing. Contact your wireless provider to make sure that your phone is

configured properly.

Mobile web

■Navigate the mobile internet

Since your phone screen is much smaller than a computer screen, mobile internet

content is displayed differently than you may be accustomed to seeing. This

section contains guidelines for using phone keys to navigate a WAP site.

Phone keys

• To browse the WAP site, scroll up or down.

• Select a highlighted item.

• To enter text, press # to switch text input modes, and press 0-9.

• To enter special characters, press *.

Receive a call while online

Depending on your wireless service provider, you may still be able to receive a

voice call while using the WAP browser.

• To answer the incoming call, press the call key.

• To reject the incoming call, press the end key.

After you end your voice call, the mobile internet connection automatically

resumes.

If your wireless service provider does not support incoming calls while browsing,

incoming calls are automatically forwarded to voice mail.

Make an emergency call while online

You can end your data connection and make an emergency call.

1. To close your mobile internet connection, press the end key.

2. Press the end key as many times as needed to clear the display and ready the

phone for calls.

3. Enter the emergency number for your present location (for example, 911).

Emergency numbers vary by location.

4. Press the call key.

Mobile web

Clear the cache and disconnect

A cache is a memory location that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed

are stored in the cache. To empty the cache while in the browser menu, select

Navigate > Advanced > Clear. Scroll to the cache and select Cache > Clear. The

cache also clears when you press and hold the end key to power off your device.

To close your mobile internet connection while browsing, press the end key.

Extras

13. Extras

Your wireless provider may provide extra features in the Extras menu.

■Memory card

To manage the content of your microSD card, select Menu > Extras > Memory

card > Options > Type of view, Sort, Application settings, Add folder, Memory

status, or Activation key list.

■Games

Depending on your service provider, games and other applications may be

preloaded on your phone. Select Menu > Extras > Games to display the games.

Select Menu > Extras > Games >Options to manage your games. Select

Options > Memory status to view the memory available for game installations.

■Collection

Your phone software includes some Java applications specially designed for this

Nokia phone.

Launch an application

Select Menu > Extras > Collection. Scroll to an application, and select Open, or

press the call key.

An application may require a few seconds to load. When you open an application,

wait for the launch screen to disappear. At that point, the application is ready.

Leaving applications running in the background increases the demand on battery

power and reduces the battery life.

To view the memory available for application installations, select Menu >

Extras > Collection > Options > Memory status.

Note: Only install applications from sources that offer adequate

protection against harmful software.

PC connectivity

14. PC connectivity

■PC data transfer

You can transfer data, such as music, photos, and videos, from your device to a

compatible PC or from a compatible PC to your device using Bluetooth

connectivity. See "Bluetooth connectivity," p. 60.

You can transfer data, such as music, photos, and videos, from your device to a

compatible PC or from a compatible PC to your device using an IR connection.

See "Infrared connectivity," p. 63.

Remember to make back-up copies of all important data.

■Nokia PC Suite

Nokia PC Suite software is available for this phone. Nokia PC Suite is a collection

of powerful tools that you can use to manage your phone features and data. Each

component is a separate program that includes online helps.

Nokia PC Suite software, installation instructions, and other documentation is

provided free of charge and can be downloaded from the software downloads of

the Nokia web site: www.nokiausa.com/pcsuite.

Some of the features in your phone require network support. Contact your service

provider for availability and configuration instructions.

Enhancements

15. Enhancements

Check the model number of any charger before use

with this device. This device is intended for use when

supplied with power from the AC-3 or AC-4 charger.

Warning: Use only batteries, chargers and

enhancements approved by Nokia for use with this particular model.

The use of any other types may invalidate any approval or warranty, and

may be dangerous.

For availability of approved enhancements, please check with your dealer. When

you disconnect the power cord of any enhancement, grasp and pull the plug, not

the cord

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and

are operating properly.

• Installation of any complex car enhancements must be made by qualified

personnel only.

Power

• Standard 1150 mAh Li-ion Battery (BL-6C)

• Compact Charger (AC-3)

• Travel Charger (AC-4)

• Mobile Charger (DC-4)

• Charger Adapter (CA-44)

Use the CA-44 charger adapter to connect the phone with Nokia chargers

with a larger barrel size, including ACP-7, ACP-8, ACP-9, ACP-12, AC-1

(retractable charger), and LCH-12 (mobile charger).

USB data cable

• Connectivity Cable (CA-53)

Enhancements

Handsfree

• Headrest Handsfree (BHF-3)

• CDMA Headrest Handsfree (BHF-4)

• Easy to Use Car Handsfree (HF-3)

• Advanced Plug-in Car Handsfree (HF-6)

• Wireless Plug-in Car Handsfree (HF-6W)

Headsets

• Mono Headsets (HDB-4, HS-5, HS-6, HS-8, HS-9)

• Stereo Headsets (HDS-3, HS-3, HS-23)

• Wireless Mono Headsets (HDW-3, HS-4W, HS-11W, HS-21W, HS-36W)

Miscellaneous

• Inductive Loopset (LPS-4)

•TTY Adapter (HDA-10)

• Advanced Car Kit (CK-1W)

•Audio Adapter (AD-15)

• Music Stand (MD-1)

Battery information

16. Battery information

■Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times, but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal,

replace the battery. Use only Nokia approved batteries, and recharge your battery

only with Nokia approved chargers designated for this device.

If a replacement battery is being used for the first time or if the battery has not

been used for a prolonged period, it may be necessary to connect the charger

then disconnect and reconnect it to begin charging the battery.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave a fully charged battery connected to a charger, since overcharging may shorten

its lifetime. If left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few minutes before the

charging indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery

that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the

positive (+) and negative (-) terminals of the battery. (These look like metal strips

on the battery.) This might happen, for example, when you carry a spare battery

in your pocket or purse. Short-circuiting the terminals may damage the battery

or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot

or cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode

if damaged. Dispose of batteries according to local regulations. Please recycle

when possible. Do not dispose as household waste.

Battery information

■Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting

an original Nokia battery, purchase it from an authorized Nokia dealer, look for

the Nokia Original Enhancements logo on the packaging, and inspect the hologram

label using the following steps:

Successful completion of the four steps is not a total assurance of the authenticity

of the battery. If you have any reason to believe that your battery is not an authentic

original Nokia battery, you should refrain from using it, and take it to the nearest

authorized Nokia service point or dealer for assistance. Your authorized Nokia

service point or dealer will inspect the battery for authenticity. If authenticity

cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1. W hen looking at the hologram on the label, you

should see the Nokia connecting hands symbol

from one angle and the Nokia Original

Enhancements logo when looking from

another angle.

2. When you angle the hologram left, right, down,

and up, you should see 1, 2, 3, and 4 dots on each

side respectively.

3. Scratch the side of the label to reveal a 20-digit

code, for example, 12345678919876543210.

Turn the battery so that the numbers are facing

upwards. The 20-digit code reads starting from

the number at the top row followed by the

bottom row.

4. Confirm that the 20-digit code is valid by following the instructions at

www.nokia.com/batterycheck.

Battery information

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is

an authentic Nokia battery, please do not use the battery. Take it to the nearest

authorized Nokia service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements. It may also

invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated

with care. The suggestions below will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity, and all types of liquids or

moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, remove the battery, and allow the device to dry

completely before replacing it.

• Do not attempt to remove the battery from the device. Nokia recommends

that you take the device to the nearest authorized service facility for

replacement of the battery.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent

proper operation.

• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity

sensor, and light sensor lenses.

• Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep, such as contacts and

calendar notes, before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

Additional safety information

■Operating environment

Your device and its enhancements may contain small parts. Keep them out of the

reach of small children.

Remember to follow any special regulations in force in any area and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. This device meets

RF exposure guidelines when used either in the normal use position against the

ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body.

When a carry case, belt clip, or holder is used for body-worn operation, it should

not contain metal and should position the device the above-stated distance from

your body.

To transmit data files or messages, this device requires a quality connection to

the network. In some cases, transmission of data files or messages may be

delayed until such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is completed.

■Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any questions. Switch

off your device in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of

15.3 centimeters (6 inches) be maintained between a wireless device or phone

and a pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and

recommendations of Wireless Technology Research. To minimize the potential

for interference, persons with pacemakers should do the following:

• Always keep the device more than 15.3 centimeters (6 inches) from their

pacemaker when the device is switched on

• Not carry the device in a breast pocket

Additional safety information

• Hold the device to the ear opposite the pacemaker to minimize the potential

for interference.

If you have any reason to suspect that interference is taking place, switch off

your device immediately.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If

interference occurs, consult your network operator.

■Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, and air bag

systems. For more information, check with the manufacturer or its representative

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty

that may apply to the device. Check regularly that all wireless device equipment

in your vehicle is mounted and operating properly. Do not store or carry flammable

liquids, gases, or explosive materials in the same compartment as the device, its

parts, or enhancements. For vehicles equipped with an air bag, remember that an

air bags inflate with great force. Do not place objects, including installed or portable

wireless equipment in the area over the air bag or in the air bag deployment area.

If in-vehicle wireless equipment is improperly installed and the air bag inflates,

serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device

before boarding an aircraft. The use of wireless teledevices in an aircraft may be

dangerous to the operation of the aircraft, disrupt the wireless telephone

network, and may be illegal.

■Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include

areas where you would normally be advized to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting in bodily injury or

even death. Switch off the device at refueling points such as near gas pumps at

service stations. Observe restrictions on the use of radio equipment in fuel depots,

storage, and distribution areas; chemical plants; or where blasting operations are

in progress. Areas with a potentially explosive atmosphere are often but not

Additional safety information

always clearly marked. They include below deck on boats, chemical transfer or

storage facilities, vehicles using liquefied petroleum gas (such as propane or

butane), and areas where the air contains chemicals or particles such as grain,

dust, or metal powders.

Failure to observe these instructions may lead to suspension or denial of

telephone services to the offender, legal action, or both.

■Emergency calls

Important: Wireless phones, including this device, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call, make sure your device is properly charged before

attempting any emergency calls. If your battery becomes empty, you cannot

receive or make calls, including emergency calls and must wait a few minutes

after the charging begins to place your call.

1. If the device is not on, switch it on. Check for adequate signal strength. Some

networks may require that a valid UIM (CDMA SIM) card is properly inserted

in the device.

2. Press the end key as many times as needed to clear the display and ready the

device for calls.

3. Enter the official emergency number for your present location, and press the

call key. Emergency numbers vary by location.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. If the device is in an offline or flight mode you

must change the profile to activate the device function before you can make an

emergency call. Consult this guide or your network operator. When making an

emergency call, give all the necessary information as accurately as possible. Your

wireless device may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

■Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves.

Your mobile device is a radio transmitter and receiver. It is designed not to

exceed the limits recommended by international guidelines. These guidelines

were developed by the independent scientific organization ICNIRP and include

Additional safety information

safety margins designed to assure the protection of all persons, regardless of age

and health.

The exposure guidelines for mobile devices employ a unit of measurement known

as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted

using standard operating positions with the device transmitting at its highest

certified power level in all tested frequency bands. The actual SAR level of an

operating device can be well below the maximum value because the device is

designed to use only the power required to reach the network. That amount

changes depending on a number of factors such as how close you are to a

network base station. The highest SAR value when tested according to

international testing procedures for use at the ear is 0.67 W/kg.

Use of device accessories and enhancements may result in different SAR values.

SAR values may vary depending on national reporting and testing requirements

and the network band. Additional SAR information may be provided under

product information at http://www.nokia.com.

Your mobile device is also designed to meet the requirements for exposure to

radio waves established by the Federal Communications Commission (USA) and

Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over

one gram of tissue. The highest SAR value reported under this standard during

product certification for use at the ear is 1.13 W/kg and when properly worn on

the body is 0.80 W/kg.

Information about this device can be found on the FCC's website at http://

www.fcc.gov/oet/fccid by searching the equipment authorization system using

FCC ID: QMNRM-154.

■Technical information

Dimensions—Width 43 mm (1.69 inches); length 105 mm (4.1 inches); depth

17.3 mm (0.68 inch)

Weight—105 g (3.7 oz) with BL-6C Li-ion Battery

Wireless networks—CDMA 800 and 1900 MHz, AMPS, and Bluetooth wireless

technology

Volume—78cc (4.76 inch3)

Frequency range (Tx)—AMPS: 824.04-848.97 MHz; PCS: 1851.25-1908.75 MHz;

Cellular: 824.70-848.37 MHz

Frequency range (Rx)—AMPS: 869.04-893.97 MHz; PCS: 1931.25-1988.75

MHz; Cellular: 869.70-893.37 MHz

Bluetooth: 2402.0 - 2480.0 MHz

Additional safety information

GPS frequency—1575.42 MHz

■Battery information

This section provides information about battery charging times with the Compact

Charger (AC-3), the Travel Charger (AC-4), talk, and standby times. Be aware that

the information in this section is subject to change. For more information,

contact your service provider.

Charging times

The following charging times are approximate with the BL-6C 1150 mAh Li-ion

battery:

Travel Charger (AC-4): up to 1 hour 45 minutes

Compact Charger (AC-3): up to 3 hours

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use,

network conditions, features used, battery age and condition (including charging

habits), temperatures to which the battery is exposed, and many other factors.

Talk time: 3 to 4 hours (digital)

Standby time: 8 to 12 days

Index

100

Index

NUMERICS

1-touch dialing 37, 54

about your device 7

access codes 68

alarm clock 71

repeating 71

antenna 14

application settings 69

applications

collection 87

automate voicemail 31

automatic redial 54

back cover

remove 15

replace 17

backlight time-out 52

batteries and chargers 91

battery 14, 100

authentication 92

charge 18

charging times 100

information 91

remove, replace 15

talk and standby times 100

Bluetooth connectivity 60

receive data 63

set up 62

settings 62

business cards 41

calendar

make notes 73

open 72

options 72

receive, send notes 74

settings 74

call

answer or reject 19

timers 34

call log 33

call restrictions 67

call settings 53

call waiting 20

caller groups 37

calling cards 55

calls

conference 21

duration 34

make 19

mute phone during 20

options during 20

camera 44

changing options 44

take photos 44

care and maintenance 94

certification information (SAR) 98

charger

connect 18

information 91

times 100

collection applications 87

conference calls 21

connectivity

phone 60

contacts list 36

add 36

delete 40

edit 39

send 41

countdown timer 79

currency converter 79

data

call duration 34

transfer 88

data cable transfer 64

data or fax calls 56

date setting 53

dialed numbers 33

Index

101

dialing codes 32

display

main menu 12

settings 51

display language 57

DTMF tones 58

emergency calls 85, 98

with keypad locked 57

enhancements 66

approved 89

equalizer 49

ESN 8

extras 87

fax calls 34

FCC information 98

file transfer 64

folders 42

font colour 51

gallery 42

games 87

go to functions 13

headset

connect 18

help

get 8

in-phone 12

text activation 12

help text 59

indicators and icons 11

infrared 63

infrared connectivity 63

international prefix 56

internet, see wireless internet

Interval timer 80

IR 63

keyguard

automatic 57

lock and unlock 21

languages 57

lap time 81

location info sharing 53

log 33

logs

clearing 34

dialed numbers 33

missed calls 33

received calls 33

main menu display 12

maintenance services 8

make calls 19

media 44

media player 45

MEID 8

memory 58

memory card 87

message folders 26

messages

delete 28

minibrowser messages 32

text messages 24

voice messages 30

microSD card 16, 87

minibrowser

call duration 35

minibrowser messages 32

missed calls 33

mobile web 84

music player 45

mute phone 20

navigation key 58

network

approved for 7

services 6, 69

settings 69

network services 6

Index

102

Nokia PC Suite 88

notes 75

options 76

send 76

organizer 71

PC connectivity 88

personal unblocking key 69

phone

details 70

keys and parts 9

menus 11

set up your 14

phone connectivity 60

phone settings 57

photographs 44

PIN codes 66

change 68

play

radio 47

play music 46

predictive text 22

PUK codes 69

quick keys 11

radio 47

received calls 33

recording sound 49

repeating alarm 71

restore factory settings 70

safety

important safety information

safety information 5

battery 100

screen saver 51

scroll method 11

security codes

change 68

security level 67

security settings 66

set

time 53

settings 50

shared memory 7

snooze time-out 72

split time 81

standard mode 22

standby mode 10

settings 51

standby time 100

start-up tone 59

stopwatch 81

talk time 100

technical information 99

text entry 22

predictive text 22

standard 22

text messages 24

themes 52

time and date settings 53

timed profiles 50

timer

countdown 79

interval 80

timers 79

to-do list

options 77

send 77

tone settings 52

transfer files 64

turn phone on or off 18

video

record 44

view

saved messages 27

voice dialing 38, 59

voice messages 30

voice privacy 68

voice recorder 48

voicemail 30

volume

Index

103

adjust 19

volume control 19

wallpaper 51

wireless internet

make emergency call while

online 85

writing language 57

Index

104

Microsoft RM-154 AMPS/CDMA800/1900 Cell Phone with Bluetooth User Manual

Microsoft Mobile Oy AMPS/CDMA800/1900 Cell Phone with Bluetooth

Contents

Manual

Navigation menu

Namespaces

Views

Navigation