Microsoft RM-154 AMPS/CDMA800/1900 Cell Phone with Bluetooth User Manual

Download:
Mirror Download [FCC.gov]
Document ID	677562
Application ID	YzDWUkVpvTBrGWIwn/a7Mg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.41kB (1317582 bits)
Date Submitted	2006-07-05 00:00:00
Date Available	2006-07-06 00:00:00
Creation Date	2006-04-26 13:43:16
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-06-28 15:02:29
Document Title	untitled
Document Creator	FrameMaker 6.0

Nokia 6275 and Nokia 6275i User
Guide
Part No. 9250012, Issue No. 1
Copyright ©2006 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Pop-Port, Nokia 6275, Nokia 6275i, and the Nokia Original
Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other
company and product names mentioned herein may be trademarks or trade names of their
respective owners. Copyright protections may prevent some images, music (including ringing
tones), and the content from being copied, modified, transferred, or forwarded.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
©1999-2006. Tegic Communications, Inc. All rights reserved.
Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.
microSD is a registered trademark of the SD Card Association.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information contained in this user guide was written for the Nokia 6275 and Nokia 6275i
products. Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes to any of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user’s authority to operate this equipment.
Contents
Contents
For your safety.................................................................................... 5
Welcome.............................................................................................. 8
1.
Phone at a glance ...................................................................... 9
2.
Set up your phone ................................................................... 14
3.
Text entry ................................................................................. 22
4.
Messages................................................................................... 24
5.
Log ............................................................................................ 33
6.
Contacts.................................................................................... 36
7.
Gallery....................................................................................... 42
8.
Media ........................................................................................ 44
9.
Settings..................................................................................... 50
10. Organizer .................................................................................. 71
11. Catalogs .................................................................................... 83
12. Mobile web ............................................................................... 84
13. Extras ........................................................................................ 87
14. PC connectivity ........................................................................ 88
15. Enhancements .......................................................................... 89
16. Battery information ................................................................. 91
Care and maintenance ..................................................................... 94
Additional safety information......................................................... 95
Index............................................................................................... 100
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
Switch on safely
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Road safety comes first
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
Interference
All wireless phones may be susceptible to interference, which could
affect performance.
Switch off in hospitals
Follow any restrictions. Switch the phone off near medical
equipment.
Switch off in aircraft
Follow any restrictions. Wireless devices can cause interference in
aircraft.
Switch off when refueling
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
Switch off near blasting
Follow any restrictions. Do not use the phone where blasting is in
progress.
Use sensibly
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
Qualified service
Only qualified personnel may install or repair this product.
For your safety
Enhancements and batteries
Use only approved enhancements and batteries. Do not connect
incompatible products.
Water-resistance
Your phone is not water-resistant. Keep it dry.
Backup copies
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
Connecting to other devices
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
Emergency calls
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as Mobile web require network
support for these technologies.
For your safety
■ About your device
The wireless device described in this guide is approved for use on the CDMA 800
and 1900, and AMPS 800 networks. Contact your service provider for more
information about networks. When using the features in this device, obey all laws
and respect privacy and legitimate rights of others. When taking and using
images or video clips, obey all laws and respect local customs as well as privacy
and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Shared memory
The following device features may share memory: contacts; text messages;
photos, images, and tones in the gallery; calendar notes; games; and
applications. Use of one or more of these features may reduce the memory
available for the remaining features sharing memory. If your phone displays a
message that the memory is full when you try to use a shared memory feature,
delete some of the information or entries stored in the shared memory features
before continuing. Some of the features, such as photos, images, and tones in the
gallery; text messages; and applications may have a certain amount of memory
specially allotted to them in addition to the memory shared with other features.
Welcome
Welcome
Congratulations on your purchase of the Nokia mobile phone. Your phone
provides many functions which are practical for daily use, such as a hands-free
loudspeaker, camera, MP3 player, video recorder, and more. Your phone can also
connect to a PC, laptop, or other device using a USB data cable, Bluetooth
wireless technology, or infrared.
■ Getting help
Check www.nokia.com/support or your local Nokia Web site for the latest
version of this guide, additional information, downloads, and services related to
your Nokia product.
Find your phone label
If you need help, the Nokia Care
Contact Center is available for
assistance. Before calling, we
recommend that you write down
the Electronic serial number (ESN)
or Mobile Equipment ID (MEID) and
have it available.
The ESN or MEID is found on the
type label, which is located beneath the battery on the back of the phone. See
"Remove the back cover," p. 15 and "Remove the battery," p. 15.
Updates
From time to time, Nokia updates this guide to reflect changes. The latest version
may be available at www.nokia.com. An interactive tutorial for this product may
be available at www.nokiahowto.com.
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at
www.nokiaaccessibility.com.
Phone at a glance
1. Phone at a glance
■ Keys and parts
Front view
Earpiece (1)
Display (2)
Scroll key (3)
Right selection key (4)
End and power key (5)
Keypad (6)
Pop-Port™ connector (7)
Microphone (8)
Charger port (9)
Call key (10)
Left selection key (11)
Center selection key (12)
Phone at a glance
Side views
Volume key (1)
Camera flash and selfportrait mirror (2)
Camera lens (3)
Camera key (4)
Loudspeaker (5)
Headset connector (6)
Infrared (7)
■ Standby mode
Depending on your wireless service
provider and the model number of
your phone, some or all of the
following selection keys may appear
in the standby mode.
The standby mode indicates that
your phone is idle.
Signal strength (1)—More bars
indicate a stronger network signal.
Menu (2)—Press the center selection
key to select this option.
Go to (3)—Press the left selection
key to select this option.
Names or network operator menu (4)—Press the right selection key to select this
option.
Battery level (5)—A filled in battery indicates more power.
10
Phone at a glance
■ Quick keys
Depending on your wireless service provider and the model number of your
phone, some or all of the following scroll key shortcuts may be available in the
standby mode.
In the standby mode, the four-way scroll and center selection keys instantly take
you to frequently-accessed menus:
Scroll up key—Go to the camera.
Scroll right key—View the calendar.
Scroll down key—Go to the contacts list.
Scroll left key—Create a text message.
Center selection key—Display available applications or selects highlighted
menus and submenus.
■ Indicators and icons
To view the icons on your phone, select Menu > Settings > Phone details > Icon
details.
■ Phone menus
Phone features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your phone features. You can access these
menus and submenus by using the scroll method or by using a shortcut.
Note: Some features may not be available, depending on your network.
For more information, contact your wireless provider.
Scroll method
1. To select Menu, use the center selection
key. To scroll through the main menu,
use the scroll key.
On the right side of the screen, a scroll
bar is displayed with a tab that moves
up or down as you move through the
menus. This provides a visual representation of your current position in the
menu structure.
11
Phone at a glance
2. When you arrive at a menu, to enter submenus, press Select (the center
selection key).
To return to the previous menu, select Back from the submenu level.
To return to the standby mode from any menu or submenu, press the end key.
Main menu display
You can control whether your phone menu is displayed as a List, Grid or Grid with
labels. By default, the main menu displays in Grid with labels format.
Select Menu > Options > Main menu view > List, Grid, or Grid with labels.
If supported by your wireless service provider, you can also change the order of
menus in your main menu.
Select Menu > Options > Organize. Scroll to a menu, and select Move. Use the
scroll key to move the menu to a new location, and select OK. You can repeat this
procedure to customize your main menu.
To save the changes, select Done > Yes.
In-phone help
Many features have brief descriptions (help text) that can be viewed on the
display. To view these descriptions, scroll to a feature, and wait for about
15 seconds. Scroll down to view all of the description, or select Back to exit.
In order to view the descriptions, you must activate help text. Select Menu >
Settings > Phone > Help text activation.
■ Security code settings
Your device has a security option allowing you to lock your phone with a PIN
code. When the PIN code is set and turned on, no outgoing calls are allowed and
the menu cannot be accessed without entering the correct code first. This
prevents unauthorized outgoing calls or access to any information stored on your
device.
The PIN code option is in the Settings menu. The first time you access the
Security option, you must enter a PIN code. The default PIN code may vary
depending on your wireless service provider who provided your UIM card.
The PIN code protects the UIM card from unauthorized access. The PIN code can
be 4–8 digits in length. After three successive incorrect entries, the PIN code is
12
Phone at a glance
blocked. You need to enter the personal unblocking key (PUK) code. See"Personal
unblocking key (PUK) code," p. 69.
■ Go to functions
The Go to menu allows you to change the function of the left selection key on
your phone so that your most frequently used functions can be quickly accessed
from the Go to menu in the standby mode.
Select options
1. Select Go to > Options > Select options, and scroll to the options you want to
add.
2. Select Mark to add an option or Unmark to remove an option.
3. When you have marked or unmarked the desired options, select Done; to save
the changes, select Yes.
4. Select Go toto display a list of the options that you selected in step 3.
Organize functions
Select Go to > Options > Organize. Scroll to an option, and select Move. Scroll to
move the option to a new location, and select OK. You can repeat this procedure
to customize your Go to menu.
To save the changes, select Done > Yes.
13
Set up your phone
2. Set up your phone
■ Antenna
Your device has an internal antenna. Hold the device as
you would any other telephone with the antenna area
pointed up and over your shoulder.
In the Nokia 6275i phone, the internal GPS antenna is
activated when placing emergency calls or when On is
selected from the Location info sharing menu (a
network-dependent feature)."Location info sharing," p.
53.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with the
antenna affects call quality and may cause the
device to operate at a higher power level than
otherwise needed. Avoiding contact with the
antenna area when operating the device optimizes
the antenna performance and the battery life.
■ Battery
Always switch off the power and disconnect the charger before removing the
battery. Avoid touching electronic components while changing the covers.
Always store and use the device with the covers attached.
Prolonged, continuous use of your device may increase the device temperature.
The increased temperature is a normal function of this product and does not pose
a safety concern for you or the device. If the temperature is uncomfortable to
you, use a headset or allow your device to return to room temperature before
your next call.
14
Set up your phone
Remove the back cover
Note: Always switch
off the power, and
disconnect the
charger and any other
device before
removing the cover.
Avoid touching
electronic
components while
changing the cover.
Always store and use
the device with the
cover attached.
1. With the back of the phone facing you, press down and hold the back cover.
2. Slide the back cover toward the bottom of the phone, lift up, and remove.
Remove the battery
After you have removed the
back cover, insert your finger
into the finger grip, and lift
the battery from its
compartment.
Always switch the device off,
and disconnect the charger
before removing the battery.
15
Set up your phone
MicroSD card
Your phone has a microSD
card slot located under the
battery. To insert the microSD
card, complete the following
steps.
Keep all microSD cards out of
the reach of small children.
1. Remove the battery. Slide
the microSD slot cover
toward the base of the
phone (1), and lift open
the microSD slot cover (2).
2. Insert the card firmly as
shown in the illustration
(3), and close the microSD
slot cover (4).
3. Slide the microSD slot
cover toward the top of
the phone (5), and replace
the battery and back
cover.
Use only microSD cards approved by Nokia for use with this device. Nokia utilizes
the approved industry standards for memory cards but not all other brands may
function correctly or be fully compatible with this device.
Important: Do not remove the memory card while reading or writing to
the card. Doing so may cause data corruption on the card or the phone.
UIM (CDMA SIM) card slot
Your phone has a built-in UIM card slot. However, the UIM is not functional in
this phone model. Avoid placing anything into the UIM card slot.
16
Set up your phone
Replace the battery
1. Insert the battery, goldcoloured contact end
first, into the battery
slot.
2. Push down on the other
end of the battery to
snap the battery into
place.
Replace the back
cover
1. Set the back cover on the
phone with the cover
tabs aligned to the slots
in the phone.
2. Press the back cover
latch down, and slide the
back cover toward the
top of phone.
3. Make sure back cover
latch is secure.
17
Set up your phone
Charge the battery
1. Plug the charger transformer into a standard wall outlet.
2. Connect the charger to
the phone.
If necessary, you can
use a CA-44 adapter
cable (1) to connect a
charger and the phone.
After a few seconds, the
battery indicator in the
display scrolls. If the
battery is completely
discharged, it may take a few minutes before the charging indicator appears
on the display or before any calls can be made.
■ Turn your phone on or
off
1. To turn your phone on or off, press
and hold the end key for at least
3 seconds.
2. Enter the lock code, if necessary, and select OK.
■ Connect the headset
A compatible headset, such as HS-5, may
be included with your phone or purchased
separately as an enhancement. See
"Enhancements," p. 66.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
end of your phone.
appears on
the display.
2. Position the headset on your ear.
18
Set up your phone
With the headset connected, you can make, answer, and end calls as usual.
Use the keypad to enter numbers. Press the call key to place a call. Press the end
key to end a call.
You can also plug a compatible headset, the such as the HS-9 Universal Headset,
into the 2.5-mm stereo headset jack on the side of your phone to allow
hands-free operation. See "Enhancements," p. 66.
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your
safety.
■ Make calls
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code) and then enter the country
code, the area code without the leading 0, if necessary, and the phone
number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key.
To make a call using names, search for a name or phone number in Contacts.
Press the call key to call the number.
To access the list of up to 20 numbers you last called or attempted to call, press
the call key once in the standby mode. To call the number, select a number or
name, and press the call key.
■ Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end key.
To reject an incoming call, press the end key. To reject an incoming call, press the
end key within1.5 seconds.
To mute the ringing tone, press the volume key, or select Silence.
To adjust the volume of the earpiece, press the volume key located on the right
side of your phone. See "Side views," p. 10. A bar chart is displayed indicating the
volume level.
19
Set up your phone
Note: If the Divert if busy function is activated to forward the calls (for
example, to your voice mailbox) rejecting an incoming call also forwards
the call.
Call waiting
If your network operator supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, reject, or ignore
the incoming call.
1. Select Menu > Settings > Network services > Call waiting > Activate or
Cancel.
2. During a call, select Answer, or press the call key or voice key to answer the
waiting call. The first call is put on hold.
3. Press the end key to end the active call.
Mute phone during call
To mute your phone during a call, select Mute; to unmute the phone, select
Unmute.
■ Options during a call
Many of the options that you can use during a call, are network services. Check
with your wireless service provider for more information.
During a call, select Options and one of the following:
Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.
Add new call—Initiate a conference call. See"Make a conference call," p. 21.
Save—Save a number entered during a call.
Add to contact—Add a number entered during a call to a contact in your list.
End all calls—Disconnect from all active calls.
Send DTMF—Enter the numbers, and select DTMF to send the numbers as tones.
Contacts—View the contacts list.
Menu—View the phone menu.
Warning: Do not hold the device near your ear when the loudspeaker is
in use because the volume may be extremely loud.
20
Set up your phone
Make a conference call
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > Add new call.
3. Enter the phone number of the second participant; or to retrieve a number
from your contacts, select Search and the number you want to call.
4. Press the call key. The first participant is put on hold.
5. When the second participant picks up, press the call key to connect the calls.
6. To end the conference call, press the end key.
■ Keypad lock (keyguard)
To prevent the keys from being accidentally pressed, select Menu, and press *
within 3.5 seconds to lock the keypad.
To unlock the keypad, select Unlock, and press *. If keyguard is on, enter the
security code if requested.
To answer a call when keyguard is on, press the call key. When you end or reject
the call, the keypad automatically locks.
When keyguard is on, calls may be possible to the official emergency number
programmed into your device.
21
Text entry
3. Text entry
You can use two methods for entering text and numbers: standard mode and
predictive text mode. Select Clear to backspace the cursor and delete a character.
Select and hold Clear to backspace continuously and delete characters.
■ Standard mode
Standard mode is the only way to enter text into the contacts list and to rename
caller groups.
Text (Abc)
• Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted and
your device awaits the next entry.
• Press 0 to enter a space, thereby accepting a completed word.
• Press 1 to insert a period into your message.
• Press * to display a complete list of special characters.
• Press and hold # to bring up the Editor settings (Number mode, Prediction on
or Prediction off, Writing language).
Numbers (123)
To switch to 123 mode from Abc mode, press and hold # at any message entry
screen to bring up the Editor settings. Select Number mode, and the device
returns to the message entry screen and switches the Abc icon in the upper left
corner of the display to the 123 icon (or back).
Punctuation and special characters
While at any text entry screen, press * to display special characters (press and
hold * if predictive text is on). Press * again to cycle through all available
characters. Scroll to navigate through the list of special characters. With a
character highlighted, select Use to insert the character into your message.
■ Predictive text mode
Much faster than the standard mode method, predictive text input enables you to
write messages quickly using your keypad and the built-in dictionary. In predictive
text mode, your phone predicts the words as you enter them.
22
Text entry
Activate or deactivate
1. At any text entry screen, select Options > Prediction on to activate or
Prediction off to deactivate.
2. If you are turning predictive text on, select the language of your choice.
Text entry
The following illustration shows how to enter the word Nokia with predictive
text. With the English dictionary selected, press the following number keys one
time only (6, 6, 5, 4, 2). The screen displays Nokia by predicting the letter and
word, based on your keypad entry:
• Press 0 to enter a space, and begin writing the next word.
• If a displayed word is not correct, press * to see other matches. To return to
the previous word in the list of matches, select Previous
• If ? appears after a word, select Spell to add the word to the dictionary.
• Press 1 to insert a period into your message.
• Press and hold * to display special characters. Press * again to cycle through
all available characters.
■ Change case and mode
Press # to switch between uppercase, lowercase, and sentence case text. As you
press #, the following icons (not the descriptions) appear in the upper left of the
display screen:.
Uppercase text: standard mode is on.
Lowercase text: standard mode is on.
Sentence case text: standard mode is on. This option is available
only at the beginning of a sentence.
Note: You can press # within 2 seconds to switch between standard
mode and predictive text mode.
Uppercase text: predictive text is on.
Lowercase text: predictive text is on.
Sentence case text: predictive text is on. This option is available
only at the beginning of a sentence.
23
Messages
4. Messages
If you have subscribed to a message network service, you can send and receive
messages to compatible phones also subscribed to a message service. You can
also send and receive multimedia and e-mail messages if supported by your
network operator. You can make distribution lists that contain phone numbers
and names from your contacts list.
Your device supports the sending of text messages beyond the character limit of
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. Characters that use accents or
other marks, and characters from some language options like Chinese, take up
more space limiting the number of characters that can be sent in a single
message.
When composing text or multimedia messages, check the number of characters
allowed in the top right corner of the message. Using Unicode characters takes
up more space. With Unicode characters in your message, the indicator may not
show the message length correctly. Before sending the message, the phone tells
you if the message exceeds the maximum length allowed for one message.
Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
Note: When you send a message, your device may display Message sent,
indicating your device has sent the message to the message center
number programmed into your device. This is not an indication that the
message has been received at the intended destination. For more details
about messaging services, check with your network operator.
■ Text messages
Write and send
1. Select Menu > Messaging > Text messages > Create message.
2. Write a message using the keypad.
Depending on the messaging service enabled, some or all of the following
options are available while writing your message:
Sending options > Mark or Unmark > Urgent, Delivery reports, Callback
number:, or Signature. Select Sending options for a single message. See
"Sending options," p. 29.
24
Messages
Clear all—Erase all the text from the message editor.
Add-ins—Add sounds, animations, or pictures to a text message.
Styles—Select font size, font appearance, and text alignment of a text
message.
Insert contact—Insert a name from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the
contacts list.
Save—Select Drafts to save the message in the drafts folder or Templates to
save the message as one of your predefined templates in the templates folder.
Exit editor—Exit the message editor.
Use template—Insert a predefined template into your message.
Insert smiley—Insert a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary (only available with predictive text on).
Insert symbol—Insert a special character into your message (only available
with predictive text on).
Writing language—Choose the language you want to use.
Prediction on or Prediction off—Turn the predictive text on or off.
Matches—View matches in the dictionary for the word you want to use (only
available with predictive text on and when the same set of key presses can
produce multiple words).
3. To send the message, select Send to > Recently used, Send to number, Send to
distrib. list (if a distribution list has been created), or Send to many.
4. Enter the recipient’s phone number or e-mail address, or select Search to
retrieve a number or e-mail address from your contacts list; select OK.
Read message
When you receive a message, a notification message and
are displayed.
1. Select Show to read the message or Exit to dismiss the notification and read
the message later from your inbox. See "View saved messages," p. 27.
2. Scroll up or down to view the whole message, if necessary.
Options
When reading a text message, select Options to access some or all of the
following options:
25
Messages
Delete—Discard the message.
Use detail—Use or save the number, e-mail address, or Web address.
Move—Save the message to Archive, Templates, or a folder you have created.
Forward—Forward the message to another phone number or e-mail address.
Lock or Unlock—Lock or unlock the message.
Rename—Edit the title of the message.
Reply to message
1. Select Menu > Messaging > Text messages > Inbox and your desired message,
or when you receive a message, select Show.
2. Select Reply > Empty screen, Original text, Template, or one of the predefined
answers; then compose your reply using the keypad.
3. After creating the reply, select Send. The sender’s phone number or e-mail is
used as the default.
Templates
Templates are short, prewritten messages you can recall and insert into new text
messages when you are short on time.
1. Select Menu > Messaging > Text messages > Create message > Options > Use
template.
2. Select your desired template.
3. Select Send to > Recently usedSend to number, Send to e-mail, Send to many,
or Send to distrib. list (if a distribution list is created).
4. Enter the recipient’s phone number or e-mail address, or select Search to
retrieve a number or e-mail address from your contacts list; select Send.
Text message folders
Save messages
You can save drafts of messages or received messages to an existing folder or to a
folder that you have created.
1. Open the received message or create a new message, and select Options.
2. To save a received message, select Move > Archive, Templates, or a folder you
have created.
26
Messages
To save the draft of a message you have created, select Save > Drafts or
Templates.
View saved messages
1. Select Menu > Messaging > Text messages.
2. Select the folder containing the message you want to view:
Inbox—Automatically stores any incoming messages
Outbox—Stores messages that have not been sent
Sent items—Stores messages that have been sent
Drafts—Stores messages created as drafts
Archive—Stores messages that you choose to archive, including unread ones
Templates—Stores pictures and prewritten templates. Preloaded templates
can be edited and customized.
My folders—Allows you to organize your messages by creating custom folders
and saving some of your messages here. Select Options > Add folder, Rename
folder, or Delete folder to add a custom folder or rename or delete a folder you
have created.
You can only delete folders created in my folders; the inbox, sent items, archive,
and templates folders are protected. When deleting a folder, you are also
deleting all messages in the folder.
Distribution lists—Stores created distribution lists
3. When the folder opens, select the message you want to view.
Create distribution lists
Distribution lists allow you to send text messages to a designated group of
people.
1. Select Menu > Messaging > Distribution lists > New list.
If you create a second distribution list, select Menu > Messaging >
Distribution lists > Options > Create new list.
2. Enter a name for the list, and select OK.
3. To add a contact to this list, select Add new, and add the contacts one by one.
A distribution list only contains phone numbers of recipients.
27
Messages
Add and remove contacts
To add contacts, select Menu > Messaging > Distribution lists > the list > Add
new. Add the contacts one by one.
To remove contacts, select Menu > Messaging > Distribution lists > the list >
Options > remove contact name.
Manage distribution lists
1. Select Menu > Messaging > Distribution lists.
2. Lists you have created appear in the display. Scroll to the list you wish to
modify; select Options and one of the following:
Create new list—Create a new distribution list.
Rename list—Rename the distribution list.
Clear list—Clear the distribution list of all current contacts.
Delete list—Delete the distribution list.
Delete messages
If your message memory is full and you have more messages waiting at the
network, No space for new messages appears in the standby mode. You can do
the following:
• Read some of the unread messages, and delete them individually.
• Delete messages from some of your folders.
Delete a single message
1. Select Menu > Messaging > Text messages.
2. Select the folder containing the message you want to delete.
3. Highlight the message you want to delete.
4. Select Options > Delete.
5. Select Yes to delete the message or No to exit.
Delete all messages in a folder
1. Select Menu > Messaging > Text messages > Delete messages.
2. Select the messages you want to delete:
All—Deletes all messages in all of the folders
All read—Deletes any messages that have been read in all of the folders
28
Messages
All unread—Deletes any messages that have not been read in all of the folders
3. Select and mark the folders that have messages you want to delete:
Inbox—Deletes all messages from the inbox folder
Sent items—Deletes all messages from the sent items folder
Outbox—Deletes all messages from the outbox folder
Drafts—Deletes all messages from the drafts folder
Archive—Deletes all messages from the archive folder
User defined folders—Deletes all messages from the user defined folder
4. Select Done > Yes to empty the marked folder.
Sending options
To change sending options for all text messages, select Menu > Messaging > Text
messages > Message settings > Sending options and the setting you want to
change:
Priority > Normal or Urgent —Set the priority of a message.
Delivery reports > On or Off—Send a note to yourself confirming delivery of the
message.
Send callback no.—Send a callback number to the recipient. Select Off or enter
your desired phone number to send to the recipient as a callback number, and
select OK.
Signature—Select On to create a signature to send with text messages or Off to
turn this feature off.
To change sending options for one message, select Menu > Messaging > Text
messages > Create message > Options > Sending options, mark or unmark the
setting you want to change:
Urgent—Set the priority of the message as urgent.
Delivery reports—Send a note to yourself confirming delivery of the message.
Callback number—Enter your desired phone number to send to the recipient as a
callback number, and select OK.
Signature—Create a signature to send with the text message.
29
Messages
Other settings
Select Menu > Messaging > Text messages > Message settings > Other settings
and the setting you want to change:
Save rcvd. text msgs.—Select UIM/ph. if no mem., Phone only, or UIM card only.
Message font size > Small font, Normal font, or Large font
Message overwriting > Sent items only, Inbox only, Sent items & Inbox, or Off
Note: When the message memory is full, your phone cannot send or
receive any new messages. To free up the memory, you can select
Message overwriting to make your phone automatically replace old
messages in the inbox and outbox folders when new ones arrive.
Save sent messages > Always save, Always prompt, or Off
Queue if no digital > On, On prompt, or Off—Messages are stored in the outbox
until they can be sent with digital service.
Send numeric page
■ Voice messages
If you subscribe to voice mail, your network operator will give you a voice
mailbox number. You need to save this number to your device to use voice mail.
When you receive a voice message, your device beeps, displays a message, or both.
If you receive more than one voice message, your device shows the number of
voice messages received.
Save voice mailbox number
Your network operator may have already saved your voice mailbox number to
your device. Select OK to leave the number unchanged.
1. Select Menu > Messaging > Voice messages > Voice mailbox no.. The voice
mailbox number is displayed.
2. If the box is empty, enter the voice mailbox area code and number, and
select OK.
Set up voice mail
1. After you save the voice mailbox number, in the standby mode, press and
hold 1.
30
Messages
2. When you connect to voice mail, and the prerecorded greeting begins, follow
the automated instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in the standby mode, press and hold 1; or select
Menu > Messaging > Voice messages > Listen to voice msgs. to dial the voice
mailbox number. When you connect and the prerecorded greeting begins, follow
the automated instructions to listen to your voice messages.
Automate voice mail
Voice mail services vary by network operator. The following instructions are
examples of common operations. Please check with your network operator for
specific instructions on using your voice mail service.
Write down voice mailbox number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should look similar to
the following:
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and
press #.
Phone numbers with dialling codes
You can insert special characters called dialling codes into phone numbers such
as voice mail, and save the number to a speed dialling location.
Dialling codes instruct the receiving system to pause, wait, bypass, or accept
the numbers that follow them in the dialling string. To set up dialling codes, do
the following:
1. Select Menu > Contacts > 1-touch dialing.
2. Scroll to an (empty) speed dialling slot, and select Assign.
3. Enter your mailbox phone number, including the area code.
4. Enter any dialling codes as necessary after the entered phone number.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.
31
Messages
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned speed dialling
key in the standby mode.
Insert dialing codes
Press * repeatedly to cycle through dialling codes. When the desired code appears
in the display, pause briefly, and the code is inserted into the dialling string.
The following dialling codes are available:
*—Bypasses a set of instructions
p—Pauses for 2.5 seconds before sending any numbers that follow
+—Replaced by the international access code
w—Waits for you to press the call key before sending the numbers or codes
that follow
Clear voice mail icon
To clear the voice mail icon from the display, select Menu > Messaging > Voice
messages > Clear voice msg. icon.
■ Web messaging
Web messaging is a network service. See"Network services," p. 6.
If your network operator supports this feature, you can use the minibrowser to
check for e-mail messages. Select Menu > Messaging > Browser msgs. >
Connect.
Important: Exercise caution when opening messages. E-mail messages
may contain malicious software or otherwise be harmful to your device
or PC.
32
Log
5. Log
Log stores information about the last 30 missed, received, or dialed
calls. It also displays the total duration of all calls. When the number of calls
exceed the maximum, the most recent call replaces the oldest.
When viewing missed, received, or dialed calls, the menu options are the same:
Time of call—Display the date and time of the call.
Send message—Send a message to the number.
Use number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add the number to an existing name in your contacts list, if the
number is not associated with a name.
Delete—Clear the number from memory.
Call—Call the number.
■ View missed calls
Missed calls are calls that were never answered. The missed calls feature does not
function when your phone is switched off.
1. Select Menu > Log > Missed calls; select List.
2. Scroll to a name or number, select Options, and an option.
■ View received calls
Received calls are calls that have been answered.
1. Select Menu > Log > Received calls.
2. Scroll to a name or number, select Options, and an option.
■ View dialed numbers
Dialed calls are numbers you have previously dialed from your phone:
1. Press the call key; or select Menu > Log > Dialled numbers.
2. Scroll to a name or number, and select Options and an option.
33
Log
■ View message recipients
You can view recipients of messages you have sent. Select Menu > Log > Msg.
recipients.
■ Clear log lists
You can delete any missed, dialed, or received calls from phone memory.
Select Menu > Log > Clear log lists > All call lists, Missed calls, Received calls,
Dialled numbers, or Msg. recipients.
■ Call duration
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
To view the duration of your calls, select Menu > Log > Call duration and one of
the following options:
Last call—Check the time of your last call.
Dialled calls—Check the combined time of calls you dialed for either Home or
Roaming.
Received calls—Check the combined time of calls you received for either Home or
Roaming.
All calls—Check the combined time of all calls.
Life timer—Check the total airtime minutes logged on your phone.
Clear timers—Enter your lock code, and select OK to clear all timers on your
phone.
Note: Some timers, including the life timer, may be reset during service
or software upgrades.
■ Data or fax calls
Data/fax calls are a network service. See "Network services," p. 6, for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data and fax calls.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes and so forth.
34
Log
Select Menu > Log > Data/fax calls and one of the following options:
Last sent data/fax—View the size (KB) of the last sent data or fax call.
Last rcvd. data/fax—View the size (KB) of the last received data or fax call.
All sent data/fax—View the size (KB) of all sent data and fax calls.
All received data/fax—View the size (KB) of all received data and fax calls.
Duration of last call—View the duration time of the last data or fax call.
Duration of all calls—View the duration time of all calls.
Clear all data/fax logs—Select Yes to clear all data and fax logs.
■ Duration of minibrowser calls
Minibrowser is a network service. See "Network services," p. 6, for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data from the minibrowser.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes and so forth.
Select Menu > Log > Browser calls and one of the following options:
Last sent data—View the size (KB) of the last sent browser data.
Last received data—View the size (KB) of the last received data.
Sent browser data—View the size (KB) of all sent browser data.
Rcvd. browser data—View the size (KB) of all received browser data.
Last browser session—View the duration time of the last browser session.
All browser sessions—View the duration time of all browser sessions.
Clear all browser logs—Select OK > Yes to clear all browser logs.
35
Contacts
6. Contacts
The contacts list can hold up to 500 contacts with multiple numbers and text notes
for each contact. The amount of numbers and text entries you can save may vary,
depending on the length and total number of entries in the contacts list.
■ Add new contacts
To access the contacts list in the standby mode, select Menu > Contacts >
Names.
Save contact name and number
1. In the standby mode, enter the phone number you want to save.
2. Select Save.
3. Enter the name, and select OK.
Save contact number only
1. In the standby mode, enter the phone number you want to save.
2. Select and hold Options.
Save an entry
1. In the standby mode, select Menu > Contacts > Names > Options > Add new.
2. Enter the name, and select OK.
3. Enter the phone number, and select OK > Back.
Save numbers and text items
You can save different types of phone numbers and short text items per name to
the contacts list. The first number you save for any entry is automatically set as
the default, or primary number, which you can always change.
1. In the standby mode, scroll down to display your contacts list, and highlight
the entry to which you want to add a phone number or text item.
2. Select Details > Options > Add detail > Number (General, Mobile, Home, Office,
or Fax), Tone, E-mail address, Web address, Postal address, Note, or Image.
3. Enter the number or text for the type you have selected, and select OK.
36
Contacts
4. To change a number type, highlight the number, and select Options > Change
type >General, Mobile, Home, Office, or Fax.
Change default number
You can also change which phone number is the default (primary) number for
the contact entry.
1. In the standby mode, scroll down to select the contact entry you want to
change, and select Details.
2. Scroll to the number you want to set as default, and select Options > Set as
default.
Caller groups
You can add contacts list entries to any of five caller groups, and assign a unique
ringing tone or graphic to that group. This enables you to identify callers from the
group by their unique ringing tone or graphic.
1. To assign an entry in your contacts list to a caller group, select your desired
contact entry, and select Options > Details.
2. To manage your caller groups, in the standby mode, select Menu > Contacts >
Caller groups > Group details to display the following caller group options:
Group name—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo> On or Change—Set the graphic for the caller group.
Group members—Add or remove members from the caller group.
Set up 1-touch dialing
You can associate any entry in the contacts list with a key from 2-9. To dial those
entries, press and hold the assigned key. See "Set up 1-touch dialing," p. 37 to
activate or deactivate 1-touch dialing.
Assign a key to 1-touch dialing
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to an (empty) slot, and select Assign.
3. Enter the number (including the area code) and a name for the number, and
select OK; or select Search to retrieve a number from the contacts list.
37
Contacts
If 1-touch dialing is off, the device displays a prompt and asks if you want to
turn speed dialling on.
4. Select Yes to activate 1-touch dialing.
Change speed dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing entry you want to change, and select Options >
Change.
3. Enter the new number and a name for the entry, and select OK; or select
Search to retrieve a number from the contacts list.
Delete 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the entry you want to delete, and select Options > Delete > Yes.
■ Voice tags
You can dial up to 25 stored numbers using voice dialing.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They depend on the speaker’s voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely on voice dialing in all circumstances.
Assign a voice tag to an entry
Before you can use voice dialing, you must first assign a voice tag to the number.
1. In the standby mode, scroll to the entry in your contacts list to which you
want to assign a voice tag.
2. Select Details > Options > Add voice tag > Start.
38
Contacts
3. Speak clearly into the microphone. Do not select Quit unless you want to
cancel the recording. The device automatically stops recording, and saves and
replays the voice tag.
appears next to commands that have voice tags assigned.
Dial a number
1. In the standby mode, press and hold the right selection key with the fold open,
or press and hold the voice key regardless of the fold being open or closed.
2. When you hear several beeps and Speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the device finds the voice tag, Found: appears, and the device
automatically dials the number. If the device does not locate a number or
recognize the voice tag, No match found appears.
Voice tags
1. After you have associated a voice tag to a contact, select Menu > Contacts >
Voice tags and your desired voice tag entry.
2. Select Playback, Change, or Delete.
■ Edit contacts list entries
1. In the standby mode, select Menu > Contacts > Names, and scroll to the entry
you want to edit in your contacts list.
2. Select Details > Options and one of the following options, which may vary
depending on whether you are editing a contact listed by phone number or
contact name:
View—View the phone number of the contact.
Add detail—Add more details to the contact: Name (only available with no
name added), Number (General, Mobile, Home, Office, or Fax), E-mail address,
Web address, Postal address, Note, Image (only available with no image
added), or Tone.
Edit name, Edit number, Edit detail, or Change image—Edit an existing
contact name, phone number, details, or image attached to the contact.
Delete—Delete more details (Delete number, Delete detail, or Delete detail)
or the entire contact entry (Delete contact) of the contact.
39
Contacts
Send message—Create and send the contact a text message or
multimedia message.
Use number—Use or save the number (available when you select a contact
listed with a contact name). Select Options to use the number.
Set as default—Change the default number of the contact.
Change type > General, Mobile, Home, Office, or Fax—Change the number type.
Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag
assigned, or select Playback, Change, or Delete with a voice tag assigned.
Copy number—Copy the number from the phone memory to the UIM card or
from the UIM card to the phone memory.
Send business card—Send the contact as a business card to another device.
Caller groups—Select No group to remove a contact from a caller group or
Family, VIP, Friends, Business, or Other to add a contact to an existing caller
group.
1-touch dialing—Add the contact to your speed dialing list.
3. Edit the option to your preference, and select OK.
■ Delete contacts entries
To delete all entries in your contacts list, in the standby mode, select Menu >
Contacts > Del. all contacts.
■ Access the contacts menu
1. In the standby mode, select Menu > Contacts and one of the following options:
Names—View the entries in your contacts list, and select Details or Options >
Search, Add new, Delete contact, or Copy for your selected entry.
Settings—Change the contacts list view or check the memory status of
your device. To set the default memory, select Phone and UIM, Phone, or
UIM card.
Caller groups—View and edit the properties of any of the caller groups on
the device.
Voice tags—Listen to, modify, or delete a voice tag to a contact in the
contacts list.
1-touch dialing—View or modify the list of speed dialling numbers.
40
Contacts
Del. all contacts—Delete all entries in your contacts list.
2. Select an option to activate the feature or access its submenu.
Search for a name
1. In the standby mode, scroll down to display the contents of your contacts list.
2. Press the key corresponding to the first letter of the name for which you
are searching.
3. Scroll to select a contact, and select Details to view the details.
Configure settings
You can select how the contacts appear in your contacts list and view the amount
of memory used or available in your device. In the standby mode, select Menu >
Contacts > Settings > Scrolling view to change view of name list or Memory
status to view the device memory used and remaining.
■ Send and receive contacts
You can send and receive an entry in your contacts list using text messaging, if
supported by your network operator.
Send a business card
You can send a business card as a text message to a compatible phone or other
handheld device.
1. Highlight your desired entry from your contacts list, and select DetailsOptions
> Send business card > Via text message, Via infrared, orVia Bluetooth.
Default number and All details options appear only if you have more than one
number or detail saved to the contact entry.
2. Enter the number for your recipient, or select Search to retrieve a number
from your contacts list.
3. Select OK and the business card is sent.
41
Gallery
7. Gallery
You can save pictures, video clips, recordings, and ringing tones to folders in the
Gallery and add new folders. You can download images and tones using SMS,
mobile Internet sites, or Nokia PC Suite.
Your device supports a digital rights management system to protect content you
have acquired. Content such as ringing tones, can be protected and associated
with certain usage rules, for example, the number of usage times or a certain
usage period. Usage rules are defined in the content activation key that can be
delivered with the content or delivered separately, depending on your network
operator. You may be able to update the activation key. Always check the delivery
terms of any content and activation key before acquiring them, as they may be
subject to a fee.
Copyright protection may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Your device has about 21 MB of memory for storing files in the Gallery. This memory
is not shared with other functions, such as contacts. If the device displays a
message that the memory is full, delete some existing files before proceeding.
■ Folders
1. Select Menu > Gallery > Memory card > Images, Video clips, ThemesGraphics,
Tones, Recordings, Received files, or a folder you created.
2. Select Open to view a list of the files in the folder or Options to access
the following:
Memory card—When a microSD card is in the phone, the card name is
displayed as the first option. To rename the mircoSD card, select OpenOptions
Rename mem. card.
Delete folder —Delete a folder you have created. You cannot delete a
preset folder.
Move—Move the selected folder into another folder. After selecting Move,
scroll to another folder, and select Move to. You cannot move a preset folder.
Rename folder—Rename a folder you have created. You cannot rename a
preset folder.
42
Gallery
Details—Show the name, size, and date of creation of the selected folder.
Type of view > List with details, List, or Grid—Determine how to display the
folders and files within them.
Sort—Sort the contents of the selected folder by name, date, format, or size.
Add folder—Create a new folder.
Memory status—Check the available memory for the device handset.
Activation key list—View the list of available activation keys. You can delete
activation keys if desired.
Mark or Unmark—Mark or unmark folders to be deleted or moved.
Mark all—Mark all folders to be deleted.
■ Fun frames and clip art
In the gallery, you can select photos and clip art and save them as screen savers
and wallpaper. To personalize photos, clip art, screen savers, and wallpaper add
your own text, add a frame, change the size of an image, and adjust the contrast.
Select Menu > Gallery > Memory card > Images > Options > Edit image >
Options > Insert text, Insert frame, Insert clip-art, Insert image, or Crop image.
When adding text, you can select the font style, size, and colour, and rotate the
font.
43
Media
8. Media
■ Camera
You can take photos and record video clips with the built-in 2.0 megapixel
camera. The camera lens is on the back of the phone. The camera produces
pictures in JPEG format and video clips in 3GP format.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Your device supports image capture resolutions of up to 1600 x 1200 pixels. The
image resolution in these materials may appear different.
If there is not enough memory to take a new photo, delete old photos or other
files in the gallery, or move photos to a microSD card. See "MicroSD card," p. 18.
Keep a safe distance when using the flash. Do not use the flash on people or
animals at close range. Do not cover the flash while taking a picture.
Take a photo
Select Menu >Media > Camera. To take a photo, select Capture. Photos are saved
in the Images folder of the gallery. To take another photo, select Back; to send
the photo, select Send. To view the options, select Options.
Record a video clip
Select Menu >Media > Camera > Options > Video. Select Record to begin
recording the video clip. Select Pause to pause, Continue to resume, or Stop to
stop the recording. Video clips are saved in the Video clips folder of the gallery
menu.
Camera options
Select Menu >Media > Camera > Options and from the following:
Still image or Video—Choose Still image to take a picture or Video to record a
video.
Mute audio or Unmute audio—Turn the sound on or off for the video clip.
Night mode on or Night mode off—Switch the camera night mode on and off.
Flash on or Flash off—Turn the camera flash on and off.
44
Media
Self-timer on or Self-timer off—Turn the self-timer on and off with still images.
Img. sequence on or Img. sequence off—Turn image sequencing on or off. The
pictures are then saved to the gallery. This option only appears in still image
mode.
View previous—View the previous photo or video taken. This option only appears
when a photo has been taken during that session.
Open Gallery—Open the Gallery to view saved images, videos, and recordings.
Settings—Change the settings for the phone camera.
■ Media player
With the media player you can download, view, and play compatible images,
audio and video files, and animated images from a variety of sources.
The media player enables you to play streaming videos and streaming audio from
a network server. Streaming functionality is a network service and requires
network support. Check the availability of these services, pricing, and tariffs with
your network operator or the service provider whose service you want to use.
network operators will also give you instructions on how to use their services.
In the standby mode, select Menu > Media > Media player > Online media >
Open Gallery, Go to address, or FF/Rew interval.
Online media—Connect to the operator’s network. This is a network service.
Check with your network operator for pricing and information.
Open Gallery—Open the Gallery. From Gallery, you can play stored audio and
video files.
Go to address—Connect to a web address.
FF/Rew interval—Set the fast forward and rewind interval to 10 seconds, 20
seconds, 30 seconds, or set an interval.
■ Music player
Your phone includes a music player for listening to music or other tracks in MP3
or AAC format. You can transfer files from a PC to your phone using a USB data
cable connection. To transfer music tracks from a compatible PC and manage the
music tracks and track lists, see instructions for the application in the Nokia PC
Suite online help. See Data cable transfer, p. 61; Infrared connectivity, p. 60; and
Bluetooth wireless technology, p. 57 for more information on transferring music
tracks to your phone.
45
Media
Note: Only files protected by DRM can be used as ringtones.
Files stored in the Music files folder of the Gallery are automatically detected and
added to the default playlist. Music files stored elsewhere, such as a microSD
card, must be defined in a track list before listening to them. Listen to sound files
through a compatible headset or the phone loudspeaker. Calls can be made or
answered while using the music player. During a call, the playback is paused.
When the call ends, the music player restarts where it left off.
Play music tracks
In the standby mode, select Menu > Media > Music player. If there are no music
files in the Music files folder, you can select another folder before entering the
Music player. The details of the first track on the default track list are shown.
To use the graphical keys,
right to the desired key, and select it.
Play track—To play a track, select
, or
, on the display, scroll left or
Adjust volume—To adjust the volume level, use either the volume key or the left
and right selection keys.
Stop track—To stop the playing, select
or press and hold the end key.
Skip tracks—To skip to the beginning of the next track, select
beginning of the previous track, select
twice.
. To skip to the
Rewind or fast forward—To rewind the current track, select and hold
. To
fast forward the current track, select and hold
. Release the key at the
position you want.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Music player options
Select Menu > Media > Music player > or other music folder > Options and one
of the following options:
Note: Some features may not be available, depending on your network.
For more information, contact your wireless provider.
Play via Bluetooth—Connect to a Bluetooth device to play music.
Show tracks—View all the tracks available on a track list. To play a track, highlight
the track, and select Play. Select Options > Send to send the music file. Select
46
Media
Options > Refresh all tracks to refresh the track list (for example, after adding
new tracks to the list). Select Options > Change track list to change the track list
that is shown when you open the Music player menu, if several track lists are
available in the phone.
Play options—Select Random to play the tracks on the track list in random order.
Select Repeat to play the current track or the entire track list repeatedly. Select
Music source > Default folder or Select folder to change the folder currently used
by the music player.
Media equalizer—The equalizer enhances the sound quality when using a headset
(only) with the Music player by amplifying or attenuating frequency bands. There
are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two
customizable settings.
Warning: When using the stereo headset your ability to hear outside
sounds may be affected. Do not use the stereo headset where it can
endanger your safety.
Send—Send music files to a compatible device using infrared or Bluetooth.
Memory status—View used and free memory of the phone and memory card.
■ Radio
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Your phone has an FM radio that also functions as an alarm clock radio. To listen
to the FM radio on your phone, connect a compatible music stand, a 2.5 mm
headset, or stereo headset. The FM radio uses the wire of the headset as an
antenna. A compatible headset needs to be attached to the device for the FM
radio to function properly. The quality of a radio broadcast depends on coverage
of the radio station in that particular area.
Select Menu > Media > Radio. To use the graphical keys,
, or
on the display, scroll left or right to the desired key, and select it. To change the
volume, press the volume keys.
■ Save radio channels
1. To start the channel search, select and hold
or
. To change the radio
frequency in 0.1 MHz steps, briefly press
or
47
Media
2. To save the channel to a memory location 1 to 9, press and hold the
corresponding number key. To save a channel to a memory location 10 to 20,
briefly press 1 or 2, then press and hold the desired number.
3. Enter the name of the channel, select OK.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. Once the call is
ended, the radio switches back on.
■ Listen to the radio
Select Menu > Media > Radio. To scroll to the desired channel, select
or
, or press the headset key. To select a radio channel location, briefly press the
corresponding number keys.
Select Options and from the following options:
Switch off—Turn off the radio.
Save station—Enter a name for the channel, and select OK. Select one of 20
locations to save the channel location.
Stations—Select from list of current saved channels on your phone. Select
Options > Delete station to clear channels or Options > Rename to rename
channels.
Mono output or Stereo output—Listen to the radio in monaural mode or in stereo
(default). Stereo output is available through a stereo enhancement.
Headset or Loudspeaker—With the headset attached, listen to the radio through
a headset or the loudspeaker.
Set frequency—Manually enter the frequency of a known radio station, and select
OK. You can also press * to set a frequency.
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
■ Voice recorder
You can record pieces of speech, sound, or an active call for up to 3 minutes. The
recorder cannot be used when a data call is active.
48
Media
Record speech or sound
1. Select Menu > Media > Voice recorder.
2. To start the recording, select the record virtual button. To start the recording
during a call, select Options > Record. While recording a call, all parties to the
call hear a faint beeping sound about every 2 seconds. When recording a call
hold the phone in the normal position near your ear.
3. To end the recording, select the stop virtual button. The recording is saved in
Gallery > Recordings.
4. To listen to the latest recording, select Options > Play last recorded.
5. To send the last recording using a multimedia message, Bluetooth
technology, or IR, select Options > Send last recorded.
■ Equalizer
The equalizer enhances the sound quality when using Music player by amplifying
or attenuating frequency bands. There are five preset equalizer settings (Normal,
Pop, Rock, Jazz, and Classical) and two customizable settings.
Activate an equalizer set
Select Menu > Media > Equalizer, scroll to the desired equalizer setting, and
select Activate. Select Options > View to display the equalizer settings.
Create a custom equalizer set
1. Select Menu > Media > Equalizer.
2. Highlight a customizable setting, and select Options > Edit.
The selected set appears in the display with the bar on the far left highlighted.
The bars adjust frequencies, from the lowest (the far left bar) to the highest
(the far right bar). The higher the indicator on a particular bar, the more that
frequency is amplified.
3. Scroll to adjust the frequencies. Select Save.
4. To rename the setting, select Options > Rename, enter a new name, and
select OK.
5. To activate the setting, select Activate.
49
Settings
9. Settings
Use this menu to change profiles, display settings, themes, tone settings, time
and date settings, call settings, phone settings, voice commands, connectivity
settings, enhancement settings, security settings, application settings, network
settings, network services, restore factory settings, and phone details.
■ Profiles
Profiles define how your device reacts when you receive a call or message and
how your keypad sounds when you press a key. You can leave ringing options,
keypad tones, and other settings for each of the available profiles at their default
setting, or customize them to suit your needs.
Profiles are also available for enhancements such as the headset and car kit. See
"Enhancements," p. 66.
To activate a profile, select Menu > Settings > Profiles > General, Silent, Meeting,
Outdoor, (My profile 1), or (My profile 2) > Activate.
Personalize a profile
You can personalize any of the profiles in various ways.
1. Select Menu > Settings > Profiles.
2. Select the profile you want to personalize.
3. Select Personalize and the option you want to personalize.
Set a timed profile
You can use timed profiles to prevent missed calls. For example, suppose you
attend an event requiring your device set to Silent before the event starts, but
you forget to return it to General until long after the event. A timed profile can
prevent missed calls by returning your device to the default profile at a time you
specify. You can set timed profiles up to 24 hours in advance.
1. Select Menu > Settings > Profiles.
2. Select the profile you want to activate and Timed for timed expiration.
3. Enter the time in hh:mm format for the profile to expire, and select OK.
50
Settings
■ Display
Standby mode settings
You can choose settings for the display of the standby screen on the display.
Wallpaper
Select Menu > Settings > Display > Standby mode settings > Wallpaper and one
of the following:
On—Activate wallpaper on your phone.
Off—Deactivate wallpaper on your phone.
Image—Choose an image from the gallery for wallpaper. Select Open to browse
the Images folder. Select the image of your choice.
Slide set—Choose a slide set from the gallery for wallpaper. Select Open to
browse the Images folder. Select the slide set of your choice.
Font colour
To set the font colour of your phone when in the standby mode, select Menu >
Settings > Display > Standby mode settings > Standby font colour. Scroll to
select a colour from the colour grid.
Screen saver
To choose a screen saver for the main display, select Menu > Settings > Display >
Screen saver and one of the following:
On—Activate the screen saver on your phone.
Off—Deactivate the screen saver on your phone.
Screen savers > Image, Video Clip, Slide set, Digital clock, or Open Camera— an
image, video clip, or other option to act as your screen saver.
Time-out—Modify the idle time before the screen saver activates.
Power saver is automatically activated after the time-out of the screen saver to
optimize battery life.
Sleep mode
The sleep mode is a power-saving feature that turns the phone display off during
inactivity. Select Menu > Settings > Display > Sleep mode. When sleep mode is
51
Settings
activated, the display is completely blank, but the phone is still active. Press any
key to restore the display.
Backlight time-out
To control the time-out of the backlight on your phone, select Menu > Settings >
Display > Backlight time-out.
■ Themes
A theme contains many elements for personalizing your phone, such as wallpaper,
screen saver, colour scheme, and a ringing tone.
Themes automatically loads wallpapers, screen savers, ringing tones and
background colours. Selecting a theme over-writes previous settings. Individual
settings for a theme can be overwritten independently in the settings menu. For
example, a theme selects a wallpaper, a screen saver, and a default ringing tone.
The default ringing tone within a theme can be overwritten. See "Tone settings,"
p. 52.
1. Your phone has a default theme. To choose the theme on your display, select
Menu > Settings > Themes > Select theme > Themes.
2. Scroll to a theme, and select OpenApply theme.
■ Tone settings
You can adjust the ringing volume, keypad tones, and more for the active profile.
See "Personalize a profile," p. 50 for more information on profile settings.
Select Menu > Settings > Tones and one of the following:
Incoming call alert—Select how the device notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Incoming call video > Incoming call video off or Incoming call video on—Indicate
whether to replace the default audio ringing tone with the selected video.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert > On or Off—Set the vibrating alert.
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones > On or Off—Set warning and confirmation tones.
52
Settings
Alert for—Define which caller groups the selected profile will accept or decline.
See "Caller groups," p. 37.
■ Time and date settings
Clock
Select Menu > Settings > Time and date > Clock > Show clock, or Hide clock, Set
the time, Time zone or Time format.
Date
Select Menu > Settings > Time and date > Date > Show date or Hide date, Set the
date, Date format, or Date separator.
Date and time auto-update
Auto-update is a network service. See "Network services," p. 6. If your network
operator supports this feature, you can allow the digital network to set the clock,
which is useful when you travel to another network or time zone.
Select Menu > Settings > Time and date > Auto-update of time > On, Confirm
first, or Off.
If you use the Auto-update of time option while outside the digital network, you
may be prompted to enter the time manually. Network time replaces the time
and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (when the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call settings
Location info sharing
Location info sharing is available for the Nokia 6275i device. Location info
sharing is a network service. See "Network services," p. 6.
If your wireless service provider supports this feature, then location info sharing
allows the device to share position information over the network. For calls to
emergency numbers, this position information may be used by the emergency
operator to determine the position of the device. The functionality and accuracy
of this feature are dependent on the network, satellite systems, and the agency
53
Settings
receiving the information. This feature may not function in all areas or at all
times.
In the standby mode, select Menu > Settings > Call > Location info sharing >
Emergency or On.
Emergency—This is the default profile. The device location information is shared
only during an emergency call to the official emergency number programmed
into your device. The screen displays
in the upper left hand corner in the
standby mode.
On—The device location information is shared with the network whenever the
device is powered on and activated. The screen displays
in the upper left
hand corner in the standby mode.
Location information will always be shared with the network during emergency
calls to the official emergency number programmed into the device, regardless of
which setting is selected. After placing an emergency call the device remains in
emergency mode for 5 minutes. During this time, the location information will be
shared with the network. See "Emergency calls," p. 97.
Anykey answer
Anykey answer enables you to answer an incoming call. Briefly press any key
except the right selection or end key. In the standby mode, select Menu >
Settings > Call > Anykey answer > On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number (number of times is specified by the network), and notifies you when the
network is available. In the standby mode, select Menu > Settings > Call >
Automatic redial > On or Off.
1-touch dialing
You can activate or deactivate 1-touch dialing. In the standby mode, select
Menu > Settings > Call > 1-touch dialing > On or Off.
54
Settings
Automatic service update
Your device is capable of receiving updates to wireless services sent to your
device by your network operator. In the standby mode, select Menu > Settings >
Call > Auto-service update > On or Off.
Calling cards
If you use a calling card for long distance calls, save the calling card number in
your phone. The phone can store up to four calling cards. Contact your calling
card company for more information.
Save information
1. In the standby mode, select Menu > Settings > Call > Calling card.
2. Enter your security code, and select OK. See "Security," p. 66.
3. Scroll to the calling card of your choice, and select Options > Edit > Select >
Dialling Sequence.
4. Select one of the following sequence types:
Access+phone+card—Dial the access number for the calling card, the phone
number, then enter the card number (plus PIN if required).
Access+card+phone—Dial the access number for the calling card, card
number (plus PIN if required), then enter the phone number.
Prefix+phone+card—Dial the prefix (numbers that must precede the phone
number) and phone number, then enter the card number (plus PIN if
required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name > enter the card name > OK.
Select a calling card
You can select one of the calling cards for which you have saved information. The
selected card information is used when you make a card call.
1. In the standby mode, select Menu > Settings > Call > Calling card.
2. Enter your security code, and select OK. See "Security settings,"p. 80.
3. Scroll to the calling card of your choice, and select it.
55
Settings
Make card calls
After you have selected a calling card, make a card call.
1. Enter the phone number, including any prefix (such as 0 or 1) that your
calling card may require when you make a calling card call. See your calling
card for instructions.
2. Press and hold the send key for a few seconds until Card call is displayed.
3. Follow the instructions on the screen.
4. When you hear the tone or system message, select OK.
International prefix
You can store an international dialling prefix into your device. In the standby
mode, select Menu > Settings > Call > International prefix. In the standby mode,
when you enter + (press * twice) at the beginning of a phone number, your device
automatically inserts the international dialling prefix that you have stored after
you press the call key. See "Insert dialing codes," p. 32.
Data or fax calls
Data and fax calling is a network service. See "Network services," p. 6. If your
network operator supports this feature, you can set up the device to send or
receive data and fax calls with a terminal, such as a PDA or PC, connected.
For better performance during data calls, place the device on a stationary
surface. Do not move the device or hold it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide
which can be downloaded from the Nokia website at http://www.nokia.com/us.
1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Rcvd.
data/fax call and one of the following options:
Normal—The device receives incoming calls as usual.
Data calls only—The device receives only data calls.
Fax calls only—The device receives only fax calls.
2. When finished with receiving the fax or data call, repeat steps 1 and 2, and
select Normal.
56
Settings
Data transfer
To view the transmission speed when sending or receiving data and fax calls. In
the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate
display > Graphic or Off.
Call summary
Your device can display the time spent on a call when you hang up. In the standby
mode, select Menu > Settings > Call > Call summary > On or Off.
Show call time
To see the call time on the display screen after each call, select Menu > Settings
> Call > Show call time displ. > On or Off.
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID. In the
standby mode, select Menu > Settings > Call > Ringtone no caller ID > On or Off.
■ Phone settings
Language settings
The phone language affects the time and date formats of the clock, and alarm
clock. In the standby mode, select Menu > Settings > Phone > Phone language
and the language of your choice.
The writing language selects the language used for messaging, calendar, notes,
and To-do lists. In the standby mode, select Menu > Settings > Phone > Writing
language and the language of your choice.
Automatic keyguard
You can set the keypad of your device to lock automatically after a preset time delay.
1. In the standby mode, select Menu > Settings > Phone > Automatic
keyguard > On or Off.
2. If you select On, Set delay: is displayed.
3. Enter the delay time (in mm:ss format), and select OK.
When keyguard is on, it may be possible to dial the emergency number programmed
into your device.
57
Settings
Navigation key
If supported by your wireless service provider, you can set the features that are
activated when you press the scroll key.
1. In the standby mode, select Menu > Settings > Phone > Navigation key.
2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select
Change.
3. Select a function to assign to the action.
Memory status
You can view the size of memory available on your device. In the standby mode,
select Menu > Settings > Phone > Memory status.
You can view the size of memory available for application installations. In the
standby mode, select Menu > Extras > Memory.
DTMF tones
DTMF tones, are the tones that sound when you press the keys on your device
keypad. You can use DTMF tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
DTMF tones are sent during an active call. You can send them manually from your
device keypad, or send them automatically by saving them in your device.
Set type
In the standby mode, select Menu > Settings > Phone > DTMF tones > Manual
DTMF tones and one of the following options:
Continuous—Used to set the tone sound for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the DTMF tone length
option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can specify touch-tone length for the Fixed option. In the standby mode,
select Menu > Settings > Phone > DTMF tones > DTMF tone length >
Short (95 ms) or Long (350 ms).
58
Settings
Start-up tone
You can select to have a start-up tone when you first turn on your device. In the
standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.
Help text activation
Your device displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 14 seconds, and wait for the help text to be
displayed. If necessary, use the scroll key to page through the full help text.
The default setting for help text is On. However, you can turn help text on or off.
In the standby mode, select Menu > Settings > Phone > Help text activation.
■ Voice commands and voice tags
Before using voice tags, note the following:
• Voice tags are not language-dependent, but depend on the speaker’s voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely on voice dialling in all circumstances.
Hands-free operation
You can set as many as 16 voice commands to enable hands-free operation of
certain features in your device.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device function.
1. Select Menu > Settings > Voice commands.
2. Select the device function you want to tag: Profiles, Messages, Infrared, Voice
recorder, or Log.
3. If necessary, select an option associated with that function.
4. Select Start, and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
59
Settings
The device replays and saves the recorded tag.
with assigned voice tags.
appears next to commands
Activate a voice command
After you have associated a voice tag with a function in your device, to issue a
command, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
2. With Speak now displayed, pronounce the voice tag clearly into the microphone.
With the voice tag found, the device displays Found:, and plays the recognized
voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the
following options:
Play—Press the center selection key to listen to the voice command tag.
Change—Select Options > Change to change the voice command.
Delete—Select Options > Delete to erase the voice command tag.
■ Connectivity
You can connect the phone to a compatible devices using infrared (IR)
connection, or Bluetooth wireless technology. You can also connect the phone to
a compatible PC using IR or a USB data cable; and use the phone as a modem to
enable connectivity from the PC.
For more information, see the Nokia PC Suite online help. Nokia PC Suite and all
related software can be downloaded from the U.S. Mobile Phone products
section of www.nokiausa.com/pcsuite.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Bluetooth connectivity
Bluetooth technology connectivity enables cost-free wireless connections
between electronic devices and can be used to send and receive images, texts,
gallery files, voice recordings, videos, notes, business cards, and calendar notes. It
can also be used to connect wirelessly to products that use Bluetooth wireless
60
Settings
technology, such as computers. You can synchronize your phone and your PC
using Bluetooth connectivity.
Since devices with Bluetooth connectivity communicate using radio waves, your
phone and the other device do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of 30 feet (10 meters) of each
other. The connection can be subject to interference from obstructions such as
walls or other electronic devices.
The Bluetooth wireless technology application whether used actively or in the
background, consumes the battery and reduces the operating time of the phone.
This device is compliant with Bluetooth Specification 2.0 and supports the
following profiles:
• Object push profile (OPP)
• File transfer profile (FTP)
• Dial-up networking profile (DUN)
• Generic object exchange profile (GOEP)
• Headset profile (HSP)
• Hands-free profile v. 1.0 (HFP)
• Generic access profile (GAP)
• Service Discovery Protocol (SDP)
• Serial port profile (SPP)
To ensure interoperability between other devices supporting Bluetooth
technology, use only enhancements approved by Nokia for this model. Check
with the manufacturers of other devices to determine their compatibility with
this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider. If you want more
information on this function, visit the Bluetooth Technology organization
website: https://www.bluetooth.org/.
Pairing
You can set up a permanent association (pairing) between your phone and
another device with Bluetooth technology. Some devices may require pairing
before data transfer can take place.
61
Settings
To pair with a device, you and the owner of the other device must agree on a pass
code of 1–16 numeric characters. The first time you try to connect the devices,
you must each enter the same pass code. Once the devices are paired, you will
not need to use the pass code again, so there is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth connectivity is not active or when the devices in the list are not
available for connection.
Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options
and one of the following:
Assign short name—Give a nickname to the selected device (visible to you only).
Auto-conn. without confirmation—Select No if you want the phone to connect to
the selected device automatically or Yes if you want the phone to ask for your
permission first.
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth technology within
range, scroll to the desired device, and select Pair to establish pairing with that
device. Do not accept Bluetooth connectivity from sources you do not trust.
Bluetooth connectivity settings
To define how your phone is shown to other devices with Bluetooth connectivity.
Select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings and one
of the following:
My phone's visibility—Select Perm. visibil. to permanently show the phone to all
other devices with Bluetooth connectivity, Temp. visibil. to show the phone to all
other devices for two minutes only, or Hidden to show the phone only to the
paired devices. Operating the phone in hidden mode is a safer way to avoid
malicious software.
My phone's name—Change your phone name that is seen by other users.
Set up a connection
1. Select Menu > Settings > Connectivity > Bluetooth > On. The active
Bluetooth technology connection is indicated by
at the top of the display.
2. Select Search for audio enhancements to search for compatible devices with
Bluetooth connectivity. The list of found devices appears in the display.
3. Select the desired device. If required, enter the Bluetooth connectivity pass
code of the device to complete the pairing.
62
Settings
4. If required, enter the Bluetooth connectivity pass code of the device to pair
with the device.
Your phone connects to the device. You can start data transfer.
To view the device you are connected to, select Menu > Settings >
Connectivity > Bluetooth > Active device.
To deactivate Bluetooth connectivity, select Menu > Settings > Connectivity >
Bluetooth > Off. Deactivation of the Bluetooth technology connection will not
affect other functions of the phone.
Send data
Instead of using the Connectivity menu, you can use other phone menus to send
various types of data to other devices with Bluetooth connectivity. For example,
you can send a video from the Video clip folder of the Gallery menu. See the
appropriate sections of the user guide for information about sending different
types of data.
Receive a data transfer
When a Bluetooth technology connection is active in your phone, you can receive
notes, business cards, videos, and other types of data transfers from another
device with Bluetooth connectivity. When you receive a data transfer, an alarm
sounds, and a message appears on the screen.
To view the transferred item immediately from the standby mode, select Show. To
view the item at a later time, select Exit.
Depending on the nature of the item, it is saved in the appropriate menu in your
phone. For example, a business card is saved in Contacts, and a calendar note is
saved in Calendar.
Infrared connectivity
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, the device with which you want to establish a connection must be
IrDA compliant. You can send or receive data to or from a compatible phone or
data device (for example, a computer) through the IR port of your phone.
Warning: Do not point the IR beam at anyone’s eye or allow it to
interfere with other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
63
Settings
To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.
To deactivate the IR connection, select Menu > Settings > Connectivity >
Infrared. When the phone displays Deactivate infrared?, select Yes.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be started again.
IR connection indicator
When
is shown continuously, the IR connection is activated and your phone
is ready to send or receive data through its IR port. When
blinks, your phone
is trying to connect to the other device or a connection has been lost.
Data cable transfer
You can transfer data from your phone to a compatible PC or from a compatible
PC to your phone using a CA-53 USB data cable.
Important: Disconnect the USB data cable from the phone to make a
call.
Enable default mode connection
Connect to your PC in Nokia mode to transfer phone data and files between your
phone and PC using Nokia PC Suite.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select Accept > Nokia mode. A notification appears on the display stating a
connection is active.
You can now use PC Suite to connect to your phone.
Enable data storage connection
Connect to your PC in Data storage mode to transfer music, photo, and video files
to the phone microSD card, and from the phone microSD to your PC with
Windows Explorer.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select Accept > Data storage. USB mode: Data storage is displayed while the
phone is in data transfer mode.
3. Open Windows Explorer. Your phone microSD card will appear as a local drive
(the device name), and with a drive letter assigned to it.
64
Settings
4. Click on the folders to display a window that shows the contents of the folder
on the phone microSD card.
5. Open a second instance of Windows Explorer and display the contents of the
folder on your PC where you have MP3 files, photo files, or video files stored.
6. Select the files on your PC that you wish to transfer to the phone.
7. Drag and drop the files from the second window into the first window and
place in a folder.
8. The files are transferred to the phone and can be played by the Music player
or accessed by the Media player.
If you selected a file or files that require more memory than can fit on the
available phone memory, you will get an error note. Deselect some of your
selected files until the required memory is less than or equal to the available
memory on your phone.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the task bar at
the bottom of your PC screen.
A window pops up that displays Unplug or Eject Hardware.
2. Click on USB Device in the Hardware devices window.
A popup window displays Stop a Hardware device.
3. Highlight USB device, and click OK.
The popup window, Safe to Remove Hardware, is displayed with The ‘USB
Device’ device can now be safely removed from the system.
4. Click OK.
Important: To ensure that all memory card operations are completed in
a controlled way, do not unplug the connectivity cable until Windows
notifies you that it is safe to do so. Uncontrolled completion or
unexpected disruptions of the memory card operations may cause the
memory card and the information stored on it to become corrupted. A
corrupted memory card may have to be formatted before it can be used
again. When a memory card is formatted, all information on the card is
permanently los
65
Settings
■ Enhancements
Select Menu > Settings > Enhancements. You can select an enhancement menu
if the phone is or has been connected to a compatible enhancement type.
Depending on enhancement, select from the following options:
Default profile—Choose the profile you wish to be automatically activated when
a headset, car kit, or loopset is connected.
Automatic answer—Answer calls automatically after one ring when a headset,
car kit, loopset, or charger is connected. Select On or Off.
Lights (for Handsfree or Charger only)—Choose to keep the phone lights always
on, or to shut off automatically after several seconds. Select On or Automatic.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
Text phone (network service)—Connect to a TTY/TDD device. Check with the
manufacturer of the TTY/TDD device for a connecting cable that is compatible
with your phone. Check with your service provider for availability and description
of services.
■ Security
PIN code
The PIN code protects the UIM card from unauthorized access. The PIN code can
be 4–8 digits in length. After three successive incorrect entries, the PIN code is
blocked. You need to enter the personal unblocking key (PUK) code. See"Personal
unblocking key (PUK) code," p. 69.
Note: The PIN code must be obtained form your wireless service
provider. The PIN code is typically provided with your UIM card.
PIN code request
To provide extra security in case your phone is lost or stolen, enable your phone
to request the PIN code when powered on.
1. In the standby mode, select Menu > Settings > Security > PIN code request.
2. Enter the PIN code, and select OK.
3. Select On.
66
Settings
Call restrictions
Select call restrictions to block or allow numbers for incoming and outgoing calls.
With any numbers entered as allowed numbers, all those entered as blocked
numbers are ignored. With a number blocked, the phone blocks any call from it,
and send the caller to the voice mail.
1. In the standby mode, select Menu > Settings > Security > Call restrictions.
2. Enter the security code, and select OK. See "Security," p. 66.
3. Select the types of calls you want to restrict:
Restrict sent calls—Set restrictions on making calls.
Restrict rcvd. calls—Set restrictions on receiving calls.
4. Select whether to block or allow numbers:
Blocked numbers—Set the numbers the phone can only block, allowing all the
rest.
Allowed numbers—Set the numbers the phone can only call or receive,
blocking all the rest.
5. Select one of these options: Select, Add restriction (unavailable with memory
full), Edit (unavailable with no number added), or Delete (unavailable with no
number added).
Note: With restricted calls, you may still call the official emergency
number programmed into your device.
Security level
Your device can be set to different security levels to control device use and
memory settings. In the standby mode, select Menu > Settings > Security >
Security level. Enter your security code, and select OK and one of the following
options:
None—Disable security level protection.
Memory—Enable or disable memory protection.
Phone—Enable or disable phone protection.
67
Settings
Access codes
You can change your security code and PIN code. Avoid using codes similar to
emergency numbers such as 911 to prevent accidental dialling of the emergency
number.
Change security code
The security code controls access to features such as the security level and is
supplied with the phone. The preset code is 12345. When you change the security
code, keep the new code secret and in a safe place, separate from your phone
If you enter the wrong security code five times in succession, you will not be able
to enter a code for 5 minutes, even if you power off the phone between incorrect
entries.
1. In the standby mode, select Menu > Settings > Security > Access codes >
Change security code.
2. Enter the current security code (default is 12345), and select OK.
3. Enter the new security code (up to 10 characters), and select OK.
4. Enter the new security code again, and select OK.
Change PIN code
Before you can change your PIN code, you must enable PIN code request. See
"PIN code request," p. 66.
1. In the standby mode, select Menu > Settings > Security > Access codes >
Change PIN code.
2. Enter the current PIN code, and select OK.
3. Enter the new PIN code, and select OK.
4. Enter the new PIN code again, and select OK.
Voice privacy
Voice privacy is a network service. See "Network services," p. 6. If your wireless
service provider supports this feature, the voice privacy feature protects the
privacy of your current phone conversation from other callers placing phone calls
on your same network. In the standby mode, select Menu > Settings > Security >
Voice privacy > On or Off.
68
Settings
Personal unblocking key (PUK) code
The PUK code is used to restore a blocked PIN code. The PUK code is 8 characters
in length and cannot be changed. The PUK code must be obtained from your
wireless service provider.
Important: If you enter an incorrect PUK code 10 times in succession,
the UIM card is rejected and can no longer be used. You must contact
your wireless service provider for a new UIM card.
■ Application settings
To change game and application settings, select Menu > Settings > App. settings
and one of the following:
Application sounds > On —Play sounds during an application.
Application lights > Application defined or Default—Play lights during an
application.
Application vibration > On—Vibrate the phone during an application.
Use of vibration can aggravate injuries. Do not turn vibration on if you have any
ailment in the bones or joints of your fingers, hands, wrist, or arms.
■ Network
The menu options in your device depend on your network operator’s network.
Check with your network operator for more information.
The Network menu enables you to customize the way your device chooses a
network in which to operate while you are within or outside of your primary or
home system. Your device is set to search for the most cost-effective network. If
your device cannot find a preferred network, it selects a network automatically
based on the option you choose in the Network menu.
Select Menu > Settings > Network > Set mode > Home only, Automatic A, or
Automatic B.
■ Network services
To activate network services in your phone, select Menu > Settings > Network
services and from the following options:
Network feature sett.—Activate network services in your phone using feature
codes received from your network operator.
69
Settings
■ Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Rest. factory sett.. Enter the security or lock code, and select OK. Data
that you have entered or downloaded is not deleted (for example, entries in your
contacts list are not affected).
Note: Depending on your wireless service provider, your device may
request the security code (defaulted to 12345) instead of the lock code.
■ Phone details
To view the current details of your phone, select Menu > Settings > Phone details
and one of the following options:
User details—Show current number details.
Version details—Show the hardware, software, and browser version information
for the phone.
System details—Show the digital network the phone is on.
Icon details—Show the icons used.
70
Organizer
10. Organizer
Your phone contains features to help organize your everyday life, including an
alarm clock, calendar, calculator, countdown timer, and stopwatch.
■ Alarm clock
Set an alarm
The alarm clock is based on the phone clock. An alarm sounds at the time you
specify, even if the phone is turned off.
1. Select Menu > Organizer > Alarm clock > Alarm time.
2. Enter the time for the alarm in hh:mm format, and select OK.
3. Select am or pm if 12-hour clock format is on.
Alarm on appears briefly in the display, and
appears in the standby mode.
If you need to reset the alarm, select Menu > Organizer > Alarm clock > Alarm
time > On.
To turn off the alarm, select Menu > Organizer > Alarm clock > Alarm time > Off.
Repeat alarm
You can set the alarm to repeat every day or only on certain days of the week.
1. Select Menu > Organizer > Alarm clock > Repeat alarm > On.
2. Check the day or days of the week you wish to repeat the alarm, and select
Mark. Select Unmark to remove a day.
3. Select Done when you have added all desired days.
If you need to revise the days for a repeated alarm, select Menu > Organizer >
Alarm clock > Repeat alarm > Repetition days.
If you need to stop a repeated alarm, select Menu > Organizer > Alarm clock >
Repeat alarm > Off.
Set the alarm tone
To set which tone to play when the alarm sounds, select Menu > Organizer >
Alarm clock > Alarm tone > Standard, Radio, or Open Gallery.
71
Organizer
If you set your alarm to Radio, use an accessory that supports FM stereo.
Set the snooze time-out
You can set the Snooze time-out for the alarm.
Select Menu > Organizer > Alarm clock > Snooze time-out and a snooze time.
When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the
currently active profile), and lights up.
With the device on, select Stop to shut the alarm off or Snooze to interrupt the
alarm for 10 minutes. Snooze on appears in the display.
If you do not press a key, the alarm stops for the snooze time-out period, then
sounds again.
If you select Stop, the device asks whether you want to activate the phone for
calls. Select No to switch off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause interference or danger.
■ Calendar
The calendar keeps track of reminders, calls you need to make, meetings, memo,
and birthdays. It can even sound an alarm for any of these events.
The default monthly view provides an overview of the selected month and weeks.
You can also jump to a specific date. Any days or dates that appear in bold font
contain calendar notes such as a meeting or reminder. A short summary of notes
for the day appear at the bottom of the screen.
Open calendar
Select Menu > Organizer > Calendar.
Scroll to move the cursor in the calendar view.
Calendar options
Select Menu > Organizer > Calendar > Options and one of the following:
Week view—View your calendar by weeks. To return to month view select Back
while in the Week view.
Make a note—Create a note on the selected date.
Go to date—Jump to a specific date. Enter the date (for example, 15/07/2005),
and select OK.
72
Organizer
Go to today—Jump to the current date.
Settings—Modify the calendar settings.
Go to to-do list—Go directly to your to-do list.
Delete all notes—Delete all calendar notes. This option appears only if a calendar
note has been created.
Make a calendar note
You can make a calendar note for a specific date. You can choose from five types
of notes. Your phone asks for further information depending on which note you
select. You can also set an alarm for your note.
1. Select Menu > Organizer > Calendar.
2. Scroll to the date for which you want to make a note. Scroll or select
Options > Go to date, and select a date.
3. Select Options > Make a note and one of the following
Meeting—Enter the subject, and select Save. Enter a location, and select Save.
Enter a start and end time. Select an alarm option.
Call—Enter the phone number, and select Save. Enter a name, and select
Save. Enter a time. Select an alarm option. You can also select Options >
Search to search your contacts.
Birthday—Enter the person’s name, and select Save. Enter the year of birth.
Select an alarm option.
Memo—Enter the subject, and select Save. Enter a start and end date. Select
an alarm option.
Reminder—Enter the reminder, and select Save. Select an alarm option.
View calendar notes (day view)
You can view the calendar notes for a day.
1. Select Menu > Organizer > Calendar.
2. Scroll to the date you want to view or select Options > Go to date. Days with
notes appear in bold type.
3. Select View to see the list of notes for that day.
73
Organizer
To view a specific note, scroll to the note, and select View again. If there are no
notes for that date, select Add note to create a new calendar note.
Options while viewing a day
When viewing the list of notes for a day, you can scroll to a note, select Options
and one of the following:
Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Use detail—Use a detail contained in the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly,
monthly, and yearly). Repeat is not available for Birthday note.
Go to date—Jump to another date on your calendar.
Go to today—Return to the current date.
Send note > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send a
calendar note in calendar format (vCal), in a text message, in a multimedia
message, or directly to another device.
Copy—Copy the note. You can paste the note to another date.
Settings—Modify the calendar settings.
Go to to-do list—Go directly to your to-do list.
Receive a calendar note
When you receive a calendar note in calendar-to-calendar format (vCal), your
phone displays Calendar note received.
Select Show to view the calendar note. Select Save to save the note to your
calendar or Options > Discard to discard the note.
Modify calendar settings
Select Menu > Organizer > Calendar > Options > Settings and one of the
following:
Set the date—Enter the current date, and select OK. Appears only when the date
has not yet been set.
74
Organizer
Set the time—Enter the current time, and select OK. Appears only when the time
has not yet been set.
Time zone—Select your current time zone.
Date format—Select your preferred date format.
Date separator—Select your preferred date separator.
Time format—Select your preferred time format.
Default view—Select a monthly or weekly view.
Week starts—Select the day the week starts.
Auto-delete notes—Select when to delete past notes.
■ Notes
You can write text notes with the Notes. You can also send notes using text
messaging, infrared, or Bluetooth connectivity.
Select Menu > Organizer > Notes to see your current list of notes. If there are no
notes, select Add to create a note. If there are existing notes, scroll to a note, and
select View. Create your note, and select Save.
To write additional notes, select Menu > Organizer > Notes > Options > Make a
note. Create your note, select any note options, and select Save.
When you create a note, the following options are available:
Insert time & date—Adds the time and date to your note.
Close—Returns you to the notes list.
Insert smiley—Inserts a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This option is displayed only when
predictive text is on.
Insert symbol—Inserts a special character into your message. Option only appears
when predictive text is on.
Writing language—Choose the language you want to use.
Prediction on or Prediction off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This option is displayed only when predictive text is on.
75
Organizer
Send a note
Select Menu > Organizer > Notes, scroll to the note you wish to send, and select
Options > Send note > Send as message, Via infrared, or Via Bluetooth to send
the note in a text message, in a multimedia message, or directly to another
device.
Notes options
Select Menu > Organizer > Notes > Options and one of the following:
Make a note—Create a new note.
Delete—Delete the note you selected.
Edit—Edit the note you selected.
Use detail—Use a detail contained in the note.
Send note > Send as message, Via infrared, or Via Bluetooth—Send a note in a
text message, in a multimedia message, or directly to another device.
Delete all notes—Delete all notes.
The note options appear only when you have created one or more notes.
■ To-do list
Use the To-do list feature to keep track of your tasks. You can save a task or
errand as a to-do list note, select a priority level for the to-do list note, and mark
it as done when you have completed it. You can sort the to-do list notes by
priority or by date.
Select Menu > Organizer > To-do list. The current to-do list is displayed.
If there are no to-do tasks, select Add to create your first to-do list note. If there
are existing to-do list notes, scroll to a to-do list note, and select View.
Select Menu > Organizer > To-do list > Options > Add. Enter the subject, and
select Save > High, Medium, or Low.
To write additional notes, select Menu > Organizer > To-do list > Options > Add.
Enter the subject, and select Save > High, Medium, or Low.
When you create a to-do list note, the following options are available:
Search—Search for existing notes.
Insert smiley—Insert a smiley into your message.
76
Organizer
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. These options are displayed only when
predictive text is on.
Insert symbol—Insert a special character into your message. Insert symbol is
displayed only when predictive text is on.
Writing language—Choose the language you want to use.
Prediction on or Prediction off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This option is displayed only when predictive text is on.
To edit the notes, select Menu > Organizer > To-do list > View > Edit. Edit the
subject, select Save.
To view to-do list notes, select Menu > Organizer > To-do list > View > Options,
and one of the following choices:
Deadline—Change the deadline of the to-do list note.
Mark note as done or Mark as not done—Indicate whether the to-do list note is
completed or not.
Delete—Delete the to-do list note.
Use detail—Use a detail contained in the note.
Edit priority—Change the priority to High, Medium, or Low.
Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the
to-do list note.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do list note to your calendar.
Send a to-do list note
To send the to-do list note in calendar format (vCal), in a text message, in a
multimedia message, or directly to another device, select Menu > Organizer >
To-do list, scroll to the note you wish to send, and select Options > Send > Send
as message, Via calendar, Via infrared, or Via Bluetooth.
To-do list options
Select Menu > Organizer > To-do list > Options and one of the following:
Add—Create a new to-do list note.
Delete—Delete the to-do list note you selected.
77
Organizer
Mark note as done or Mark as not done—Indicate whether the to-do list note is
completed or not.
Use detail—Use a detail contained in the note.
Sort by deadline or Sort by priority—Sort the to-do list by either date or priority.
Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the
to-do list note in calendar format (vCal) in a text message, in a multimedia
message, or directly to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do list note you selected to your calendar.
Delete done notes—Delete the to-do list note you selected from your calendar.
Delete all notes—Delete all the to-do list notes.
The to-do list options appear only when you have created one or more notes.
■ Calculator
The calculator in your phone adds, subtracts, multiplies, divides, calculates the
square and the square root, changes the sign of the number entered, and
converts currency values.
Note: This calculator has a limited accuracy and is designed for simple
calculations.
To use the calculator. do the following:
1. Select Menu > Organizer > Calculator.
2. Enter the first number in the calculation.
Press # for a decimal point if necessary.
Press the scroll key up or down to change the sign of your number or value.
Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)
characters. Pause briefly to select the displayed character.
3. Enter the second number in your calculation.
4. Select Equals.
To perform a square or square root calculation, select Options > Square or Square
root.
78
Organizer
■ Currency converter
You can convert foreign currency to domestic, or vice versa, directly from the
standby mode or from the Calculator menu.
Note: When you change base currency, you must enter the new rates
because all previously set exchange rates are set to zero.
1. Select Menu > Organizer > Calculator > Options > Exchange rate > Foreign
units in home units or Home units in foreign units.
Foreign units in home units—The number of home units it takes to make one
unit of foreign currency.
Home units in foreign units—The number of foreign units it takes to make one
unit of your home currency.
2. Enter the exchange rate (press # to insert a decimal), and select OK.
3. Select Back to return to the Calculator screen, and enter the currency amount
to convert.
4. Select Options > To home or To foreign.
To home—Converts foreign currency to domestic currency.
To foreign—Converts domestic currency to foreign currency.
5. If you have not already entered an exchange rate, the device prompts you to
enter it. Select OK. You can edit the exchange rate at any time.
■ Timers
Your device contains two event timers: a normal timer that counts down a set
interval, and an interval timer that counts up set intervals.
The timers only work when the phone is on. Once you turn off your phone, the
timers are no longer active.
Normal timer
This countdown timer enables you to enter a specific duration (up to 99 hours,
59 minutes, and 59 seconds). When the time runs out, your device sounds an
alarm.
To set the normal timer, do the following:
1. Select Menu > Organizer > Timer > Normal timer.
79
Organizer
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear in the standby mode when the
countdown timer is running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its
lights. If you are in standby mode, select Restart or Exit. If you are not in the
standby mode, press any key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select Exit or press the
end key to clear the timer note.
To change the time:
1. Select Menu > Organizer > Timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
To stop the timer before the alarm sounds, select Menu > Organizer > Timer >
Stop timer.
Interval timer
The interval timer in your device allows you to store multiple interval timers. You
can define and store up to 10 timing periods for each interval timer. Once at least
one interval timer is set and stored, you can select the interval timer and one of
the stored intervals for that timer. When the selected interval expires, your phone
sounds an alarm, vibrates, and flashes its lights.
To set an interval timer, do the following:
1. Select Menu > Organizer > Timer > Interval timer.
2. Select Add new timer. This option only appears if you have already created an
interval timer.
3. Enter a name for the timer, and select Save.
4. Enter a name for the first timer period, and select Save.
5. Enter the desired time interval, and select OK.
6. Select an existing stored period and Edit period, Add period, Delete period, or
Start timer.
To use an interval timer:
80
Organizer
1. Select Menu > Organizer > Timer > Interval timer, and one of the set interval
timers. Add new timer is the only choice if you have not yet set any interval
timers.
2. Select Start timer, View timer, Edit timer, Add new timer, or Delete timer.
These options only appear if you have already created an interval timer.
■ Stopwatch
Your phone has a stopwatch that can be used to track time. The stopwatch
displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss
format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure split or lap time
Use the split time or lap time functions for activities where you need to pace
yourself. To measure split or lap times, do the following:
Split timing—Use the split time function for such activities as a long distance
race when you need to pace yourself. Select Split to note the lapsed time. The
timer continues to run and the split time appears below the running time. Each
time you select Split, the new measured time appears at the beginning of the list.
The maximum number of splits is 20.
Lap timing—Use the lap time function when you want to track how long it takes
to complete each cycle or lap. Select Lap to note the lap time. The clock stops,
then immediately restarts from zero. The lap time appears below the running
time. Each time you select Lap, the new measured time appears at the beginning
of the list. The maximum number of laps is 20.
1. Select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start.
2. Select Stop to end timing and display total time.
Save a time
To save a time while the clock is running, select Stop > Save, enter a name for the
measurement, and select OK. If you do not enter a name, the total time is used as
the default title for the lap or split time.
81
Organizer
Stopwatch options
Select Menu > Organizer > Stopwatch and one of the following:
Continue—Continue to measure time and return to the stopwatch screen. This
option appears only if the clock is running.
Show last time—View the last measured time.
Split timing—Use the split time function.
Lap timing—Use the lap time function.
View times—Browse saved times.
Delete times > One by one or Delete all—Delete saved times.
Stop—Stop the clock.
Operation note
If you press the end key and return to the standby mode, the clock continues to
run in the background, and
appears at the top of the screen.
82
Catalogs
11. Catalogs
Catalogs is a network service. Contact your wireless network operator for more
information. See "Network services," p. 6.
83
Mobile web
12. Mobile web
Mobile web is a network service. See "Network services," p. 6.
Your phone has a built-in browser you can use to connect to selected services on
the mobile internet. If your wireless service provider supports this feature, you
can view weather reports, check news or flight times, view financial information,
and much more. The web browser on your phone can display WAP-based content.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.
If the security indicator (
) is displayed during a connection, the data
transmission between the device and the internet gateway or server is encrypted.
The service provider secures the data transmission between the gateway and the
content server.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Mobile internet access
Because mobile internet content is designed to be viewed from your phone, your
wireless provider is now your mobile internet service provider as well.
Your wireless provider has created a home page and set up your browser to go to
this page when you log on to the mobile internet. Once at your service provider’s
home page, you may find links to a number of other sites.
It should not be necessary to manually configure the browser on your phone.
Normally this is done by your wireless provider when you subscribe to the
feature. Contact your wireless provider if you have problems using the browser.
■ Sign on to the mobile internet
Select Menu > Mobile web.
After a brief pause, your phone attempts to connect to your wireless provider’s
home page. If you receive an error message, your phone may not be set up for
browsing. Contact your wireless provider to make sure that your phone is
configured properly.
84
Mobile web
■ Navigate the mobile internet
Since your phone screen is much smaller than a computer screen, mobile internet
content is displayed differently than you may be accustomed to seeing. This
section contains guidelines for using phone keys to navigate a WAP site.
Phone keys
• To browse the WAP site, scroll up or down.
• Select a highlighted item.
• To enter text, press # to switch text input modes, and press 0-9.
• To enter special characters, press *.
Receive a call while online
Depending on your wireless service provider, you may still be able to receive a
voice call while using the WAP browser.
• To answer the incoming call, press the call key.
• To reject the incoming call, press the end key.
After you end your voice call, the mobile internet connection automatically
resumes.
If your wireless service provider does not support incoming calls while browsing,
incoming calls are automatically forwarded to voice mail.
Make an emergency call while online
You can end your data connection and make an emergency call.
1. To close your mobile internet connection, press the end key.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the emergency number for your present location (for example, 911).
Emergency numbers vary by location.
4. Press the call key.
85
Mobile web
Clear the cache and disconnect
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache. To empty the cache while in the browser menu, select
Navigate > Advanced > Clear. Scroll to the cache and select Cache > Clear. The
cache also clears when you press and hold the end key to power off your device.
To close your mobile internet connection while browsing, press the end key.
86
Extras
13. Extras
Your wireless provider may provide extra features in the Extras menu.
■ Memory card
To manage the content of your microSD card, select Menu > Extras > Memory
card > Options > Type of view, Sort, Application settings, Add folder, Memory
status, or Activation key list.
■ Games
Depending on your service provider, games and other applications may be
preloaded on your phone. Select Menu > Extras > Games to display the games.
Select Menu > Extras > Games >Options to manage your games. Select
Options > Memory status to view the memory available for game installations.
■ Collection
Your phone software includes some Java applications specially designed for this
Nokia phone.
Launch an application
Select Menu > Extras > Collection. Scroll to an application, and select Open, or
press the call key.
An application may require a few seconds to load. When you open an application,
wait for the launch screen to disappear. At that point, the application is ready.
Leaving applications running in the background increases the demand on battery
power and reduces the battery life.
To view the memory available for application installations, select Menu >
Extras > Collection > Options > Memory status.
Note: Only install applications from sources that offer adequate
protection against harmful software.
87
PC connectivity
14. PC connectivity
■ PC data transfer
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using Bluetooth
connectivity. See "Bluetooth connectivity," p. 60.
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using an IR connection.
See "Infrared connectivity," p. 63.
Remember to make back-up copies of all important data.
■ Nokia PC Suite
Nokia PC Suite software is available for this phone. Nokia PC Suite is a collection
of powerful tools that you can use to manage your phone features and data. Each
component is a separate program that includes online helps.
Nokia PC Suite software, installation instructions, and other documentation is
provided free of charge and can be downloaded from the software downloads of
the Nokia web site: www.nokiausa.com/pcsuite.
Some of the features in your phone require network support. Contact your service
provider for availability and configuration instructions.
88
Enhancements
15. Enhancements
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with this particular model.
The use of any other types may invalidate any approval or warranty, and
may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
Power
• Standard 1150 mAh Li-ion Battery (BL-6C)
• Compact Charger (AC-3)
• Travel Charger (AC-4)
• Mobile Charger (DC-4)
• Charger Adapter (CA-44)
Use the CA-44 charger adapter to connect the phone with Nokia chargers
with a larger barrel size, including ACP-7, ACP-8, ACP-9, ACP-12, AC-1
(retractable charger), and LCH-12 (mobile charger).
USB data cable
• Connectivity Cable (CA-53)
89
Enhancements
Handsfree
• Headrest Handsfree (BHF-3)
• CDMA Headrest Handsfree (BHF-4)
• Easy to Use Car Handsfree (HF-3)
• Advanced Plug-in Car Handsfree (HF-6)
• Wireless Plug-in Car Handsfree (HF-6W)
Headsets
• Mono Headsets (HDB-4, HS-5, HS-6, HS-8, HS-9)
• Stereo Headsets (HDS-3, HS-3, HS-23)
• Wireless Mono Headsets (HDW-3, HS-4W, HS-11W, HS-21W, HS-36W)
Miscellaneous
• Inductive Loopset (LPS-4)
• TTY Adapter (HDA-10)
• Advanced Car Kit (CK-1W)
• Audio Adapter (AD-15)
• Music Stand (MD-1)
90
Battery information
16. Battery information
■ Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will eventually
wear out. When the talk and standby times are noticeably shorter than normal,
replace the battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger
then disconnect and reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device when not in use. Do not
leave a fully charged battery connected to a charger, since overcharging may shorten
its lifetime. If left unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode
if damaged. Dispose of batteries according to local regulations. Please recycle
when possible. Do not dispose as household waste.
91
Battery information
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the hologram
label using the following steps:
Successful completion of the four steps is not a total assurance of the authenticity
of the battery. If you have any reason to believe that your battery is not an authentic
original Nokia battery, you should refrain from using it, and take it to the nearest
authorized Nokia service point or dealer for assistance. Your authorized Nokia
service point or dealer will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. W hen looking at the hologram on the label, you
should see the Nokia connecting hands symbol
from one angle and the Nokia Original
Enhancements logo when looking from
another angle.
2. When you angle the hologram left, right, down,
and up, you should see 1, 2, 3, and 4 dots on each
side respectively.
3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210.
Turn the battery so that the numbers are facing
upwards. The 20-digit code reads starting from
the number at the top row followed by the
bottom row.
4. Confirm that the 20-digit code is valid by following the instructions at
www.nokia.com/batterycheck.
92
Battery information
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
93
Care and maintenance
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery, and allow the device to dry
completely before replacing it.
• Do not attempt to remove the battery from the device. Nokia recommends
that you take the device to the nearest authorized service facility for
replacement of the battery.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity
sensor, and light sensor lenses.
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as contacts and
calendar notes, before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
94
Additional safety information
Additional safety information
■ Operating environment
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
Remember to follow any special regulations in force in any area and always switch
off your device when its use is prohibited or when it may cause interference or
danger. Use the device only in its normal operating positions. This device meets
RF exposure guidelines when used either in the normal use position against the
ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body.
When a carry case, belt clip, or holder is used for body-worn operation, it should
not contain metal and should position the device the above-stated distance from
your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices. Consult
a physician or the manufacturer of the medical device to determine if they are
adequately shielded from external RF energy or if you have any questions. Switch
off your device in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless device or phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. To minimize the potential
for interference, persons with pacemakers should do the following:
• Always keep the device more than 15.3 centimeters (6 inches) from their
pacemaker when the device is switched on
• Not carry the device in a breast pocket
95
Additional safety information
• Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you have any reason to suspect that interference is taking place, switch off
your device immediately.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your network operator.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
that may apply to the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same compartment as the device, its
parts, or enhancements. For vehicles equipped with an air bag, remember that an
air bags inflate with great force. Do not place objects, including installed or portable
wireless equipment in the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advized to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel depots,
storage, and distribution areas; chemical plants; or where blasting operations are
in progress. Areas with a potentially explosive atmosphere are often but not
96
Additional safety information
always clearly marked. They include below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum gas (such as propane or
butane), and areas where the air contains chemicals or particles such as grain,
dust, or metal powders.
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, legal action, or both.
■ Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call, make sure your device is properly charged before
attempting any emergency calls. If your battery becomes empty, you cannot
receive or make calls, including emergency calls and must wait a few minutes
after the charging begins to place your call.
1. If the device is not on, switch it on. Check for adequate signal strength. Some
networks may require that a valid UIM (CDMA SIM) card is properly inserted
in the device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location, and press the
call key. Emergency numbers vary by location.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in an offline or flight mode you
must change the profile to activate the device function before you can make an
emergency call. Consult this guide or your network operator. When making an
emergency call, give all the necessary information as accurately as possible. Your
wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits recommended by international guidelines. These guidelines
were developed by the independent scientific organization ICNIRP and include
97
Additional safety information
safety margins designed to assure the protection of all persons, regardless of age
and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted
using standard operating positions with the device transmitting at its highest
certified power level in all tested frequency bands. The actual SAR level of an
operating device can be well below the maximum value because the device is
designed to use only the power required to reach the network. That amount
changes depending on a number of factors such as how close you are to a
network base station. The highest SAR value when tested according to
international testing procedures for use at the ear is 0.67 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at http://www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.13 W/kg and when properly worn on
the body is 0.80 W/kg.
Information about this device can be found on the FCC's website at http://
www.fcc.gov/oet/fccid by searching the equipment authorization system using
FCC ID: QMNRM-154.
■ Technical information
Dimensions—Width 43 mm (1.69 inches); length 105 mm (4.1 inches); depth
17.3 mm (0.68 inch)
Weight—105 g (3.7 oz) with BL-6C Li-ion Battery
Wireless networks—CDMA 800 and 1900 MHz, AMPS, and Bluetooth wireless
technology
Volume—78cc (4.76 inch3)
Frequency range (Tx)—AMPS: 824.04-848.97 MHz; PCS: 1851.25-1908.75 MHz;
Cellular: 824.70-848.37 MHz
Frequency range (Rx)—AMPS: 869.04-893.97 MHz; PCS: 1931.25-1988.75
MHz; Cellular: 869.70-893.37 MHz
Bluetooth: 2402.0 - 2480.0 MHz
98
Additional safety information
GPS frequency—1575.42 MHz
■ Battery information
This section provides information about battery charging times with the Compact
Charger (AC-3), the Travel Charger (AC-4), talk, and standby times. Be aware that
the information in this section is subject to change. For more information,
contact your service provider.
Charging times
The following charging times are approximate with the BL-6C 1150 mAh Li-ion
battery:
Travel Charger (AC-4): up to 1 hour 45 minutes
Compact Charger (AC-3): up to 3 hours
Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3 to 4 hours (digital)
Standby time: 8 to 12 days
99
Index
Index
NUMERICS
1-touch dialing 37, 54
about your device 7
access codes 68
alarm clock 71
repeating 71
antenna 14
application settings 69
applications
collection 87
automate voicemail 31
automatic redial 54
back cover
remove 15
replace 17
backlight time-out 52
batteries and chargers 91
battery 14, 100
authentication 92
charge 18
charging times 100
information 91
remove, replace 15
talk and standby times 100
Bluetooth connectivity 60
receive data 63
set up 62
settings 62
business cards 41
calendar
make notes 73
open 72
options 72
receive, send notes 74
settings 74
view 73
100
call
answer or reject 19
timers 34
call log 33
call restrictions 67
call settings 53
call waiting 20
caller groups 37
calling cards 55
calls
conference 21
duration 34
make 19
mute phone during 20
options during 20
camera 44
changing options 44
take photos 44
care and maintenance 94
certification information (SAR) 98
charger
connect 18
information 91
times 100
collection applications 87
conference calls 21
connectivity
phone 60
contacts list 36
add 36
delete 40
edit 39
send 41
view 40
countdown timer 79
currency converter 79
data
call duration 34
transfer 88
data cable transfer 64
data or fax calls 56
date setting 53
dialed numbers 33
Index
dialing codes 32
display
main menu 12
settings 51
display language 57
DTMF tones 58
emergency calls 85, 98
with keypad locked 57
enhancements 66
approved 89
equalizer 49
ESN 8
extras 87
fax calls 34
FCC information 98
file transfer 64
folders 42
font colour 51
gallery 42
games 87
go to functions 13
headset
connect 18
help
get 8
in-phone 12
text activation 12
help text 59
indicators and icons 11
infrared 63
infrared connectivity 63
international prefix 56
internet, see wireless internet
Interval timer 80
IR 63
keyguard
automatic 57
lock and unlock 21
languages 57
lap time 81
location info sharing 53
log 33
logs
clearing 34
dialed numbers 33
missed calls 33
received calls 33
main menu display 12
maintenance services 8
make calls 19
media 44
media player 45
MEID 8
memory 58
memory card 87
message folders 26
messages
delete 28
minibrowser messages 32
text messages 24
voice messages 30
microSD card 16, 87
minibrowser
call duration 35
minibrowser messages 32
missed calls 33
mobile web 84
music player 45
mute phone 20
navigation key 58
network
approved for 7
services 6, 69
settings 69
network services 6
101
Index
Nokia PC Suite 88
notes 75
options 76
send 76
organizer 71
PC connectivity 88
personal unblocking key 69
phone
details 70
keys and parts 9
menus 11
set up your 14
phone connectivity 60
phone settings 57
photographs 44
PIN codes 66
change 68
play
radio 47
play music 46
predictive text 22
PUK codes 69
quick keys 11
radio 47
received calls 33
recording sound 49
repeating alarm 71
restore factory settings 70
safety
important safety information
96
safety information 5
battery 100
screen saver 51
scroll method 11
security codes
102
change 68
security level 67
security settings 66
set
time 53
settings 50
shared memory 7
snooze time-out 72
split time 81
standard mode 22
standby mode 10
settings 51
standby time 100
start-up tone 59
stopwatch 81
talk time 100
technical information 99
text entry 22
predictive text 22
standard 22
text messages 24
themes 52
time and date settings 53
timed profiles 50
timer
countdown 79
interval 80
timers 79
to-do list
options 77
send 77
tone settings 52
transfer files 64
turn phone on or off 18
video
record 44
view
saved messages 27
voice dialing 38, 59
voice messages 30
voice privacy 68
voice recorder 48
voicemail 30
volume
Index
adjust 19
volume control 19
wireless internet
make emergency call while
online 85
writing language 57
wallpaper 51
103
Index
104

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 104
Page Mode                       : UseOutlines
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:71e28adf-6264-49dc-b6e6-6c06850d9b3c
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2006:04:26 13:43:16Z
Creator Tool                    : FrameMaker 6.0
Modify Date                     : 2006:06:28 15:02:29Z
Document ID                     : uuid:0c8447e6-6275-43e5-96ce-5308645a09cb
Format                          : application/pdf
Title                           : untitled
Creator                         : FrameMaker 6.0

EXIF Metadata provided by EXIF.tools