Miele and Cie KG NAEPI02 EPI7684, Module for wireless food probe system build in the oven User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4191808
Application ID	iHBOackJg/zrNuMKzYQwkw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	51.64kB (645469 bits)
Date Submitted	2019-03-06 00:00:00
Date Available	2019-03-06 00:00:00
Creation Date	2019-01-24 09:43:57
Producing Software	Microsoft® Word 2016
Document Lastmod	2019-01-24 09:43:57
Document Title	Users Manual
Document Creator	Microsoft® Word 2016
Document Author:	Fabrizius, Andreas

2019-01-22
Integration manual for the wireless food probe system
1 General
This document describes the requirements for the oven when installing the wireless food probe system.
The wireless food probe system consists of the module (EPI7684), antenna system and the wireless food
probe. The wireless food probe will be here not describe because it is a passive device and does not
matter for the installation of the system.
The wireless food probe system may only be installed due to the identical antenna system in the
following Miele & Cie. KG ovens (host devices):
H6780-2BP
H6880-2BP
H6780-2BP2
H6880-2BP2
HR1622-2
HR1924-2
HR1934-2
HR1935-2
HR1936-2
HR1954-2
HR1955-2
HR1956-2
The certified Module, see picture below, will only be installed by Grantee Miele.
2019-01-22
Picture 1: Module EPI7684
Picture 2: label of the module
2019-01-22
Module EPI7684:
2.1
Position of the EPI7684 in the EBox of the host device
EPI7684
Antenna connector
Picture 2: Position of the EPI

The EPI7684 is fixed in the housing by suitable latching hooks in the housing. The housing is
screwed to the EBox floor with two screws.
2.2 Interface to the control-/ power electronic of the host device
On the control-/ power electronic is a 4-pin rast 2.5 plug and on the EPI site is 8-pin rast 2.5 plug. This
connection includes communication and power supply wire (13 and 3V DC)
2.3
Antenna connector
FAKRA socket coded “A” 50 Ohm.
2019-01-22
3 Antenna system
It is a loop antenna. The antenna is installed in the upper right corner of the cavity.
Picture 3: loop antenna, FAKRA-connector
Picture 4: antenna installed in the cavity of the oven
The minimum allowed separation distance from the antenna to the end user (the door outer glass pane
or the buttons on the user interface) should be 25 cm.
2019-01-22
Statements in host devices user manual
The manual or instruction manual should include the following statements in English and France:

changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

This oven complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC
rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
5 Label
The FCC an IC identifier must be displayed on the host device label in this way:
contains: FCC-ID: SSVNAEPI02 ; IC: 5669B-NAEPI02
6 Additional information
The host devices may need additional FCC approvals like 15B SDoC or certification for digital device part.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : de-DE
Tagged PDF                      : Yes
Author                          : Fabrizius, Andreas
Creator                         : Microsoft® Word 2016
Create Date                     : 2019:01:24 09:43:57+01:00
Modify Date                     : 2019:01:24 09:43:57+01:00
Producer                        : Microsoft® Word 2016

EXIF Metadata provided by EXIF.tools