MilDef Crete DA04IM PDA WITH GS, WLAN, AND BLUETOOTH User Manual manual
MilDef Crete Inc. PDA WITH GS, WLAN, AND BLUETOOTH manual
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 516113 |
| Application ID | 9Am4SC4gqHfUrozpW3mHHQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 139.03kB (1737824 bits) |
| Date Submitted | 2005-02-17 00:00:00 |
| Date Available | 2005-02-17 00:00:00 |
| Creation Date | 2005-01-14 18:10:53 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-02-17 13:52:24 |
| Document Title | Microsoft Word - manual.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | jamesbai |
HANDHELD COMPUTER DA04 SERIES USER’S GUIDE Copyright © 2004 All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, or computer language, in any form, or by any means, electronic, mechanical, magnetic, optical, chemical, or other, without the prior written permission of the manufacturer. The manufacture reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software. Trademark Acknowledgments IBM, PC are registered trademarks of International Business Machines Corp. Microsoft, Windows CE, Pocket PC, and Windows Mobile are registered trademarks of Microsoft Corp. Intel, Xscale are the registered trademarks of Intel Corp. All product and company names are trademarks or registered trademarks of their respective holders. EMC and Safety Notice FCC Regulations: zThis mobile device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. zThis mobile device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis mobile device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. 4RF Exposure Information (SAR) for GSM Function This model device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model device as reported to the FCC when tested for use at the ear is 0.46 W/kg and when worn on the body, as described in this user guide, is 0.092 W/kg for PCS Body SAR and 0.04 W/kg for WLAN Body SAR. (Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: IR5DA04IM. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.5 cm from your body when the device is switched on. Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause interference to radio communications. This equipment has been tested and found to comply with Class B digital devices, pursuant to Part 15 of the FCC rules which are designed to provide reasonable protection against such interference when operated in a commercial or residential environment. Countermeasures if interference occurs You are encouraged to do the following if interference occurs while you are operating the device: 1. Turn OFF the unit and unplug the AC adapter from the outlet to see if the interference disappears. 2. Connect the AC adapter to the outlet in another room and check if the interference still exists. 3. Use an outlet that is far away from the interfered appliance. 4. Re-orient your computer in respect to the interfered appliance to see if there is improvement. If all of these failed, please call your dealer for help. CE This equipment complies with the requirements set out in the Council Direction on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC). For the evaluation regarding the electromagnetic compatibility, the following standards were applied: EN55022 +A2:2003 Class B EMI Conduction and Radiation EN61000-3-2 Harmonics EN61000-3-3 +A1:2001 Flicker (Voltage fluctuation) EN55024 EMS EN61000-4-2 +A2:2001 ESD EN61000-4-3 +A1:2002 RS EN61000-4-4 +A2:2001 EFT EN61000-4-5 +A1:2001 Surge EN61000-4-6 +A1:2001 CS EN61000-4-8 Power-Frequency Magnetic Field EN61000-4-11 +A1:2001 Voltage Dips and Voltage Interruptions LVD EN60950 :2001 ETSI EN301 489-01 V1.4.1 EMC Standards for Radio Equipment ETSI EN 301 489-17 1.2.1 EMC Standards for 2.4GHz Wideband Transmission Systems) ETSI EN 300 328-2 V1.2.1 EMC Standards for Using Spread Spectrum Modulation Techniques UL, TÜV AC Adapter (EN60950 LVD is included in TÜV) E-Mark Registered e13 Material Safety and Recycling Notice All materials used in the construction of this unit are recyclable or environmentally friendly. No mercury, cadmium, CFC or related materials were used in the manufacturing process or inside the product. Please recycle the packing materials, and at the end of the unit's life, all other materials in accordance with the local regulations. Please refer “Materials and Recycling” for the contents of the materials. CONTENTS GETTING STARTED .............................................................................................. 1 UNPACKING ............................................................................................................. 1 QUICK CHECK .......................................................................................................... 3 CONTROLS, INDICATORS, AND PORTS ...................................................................... 4 OPERATING ENVIRONMENT AND RUGGEDNESS...................................................... 13 COMPONENTS AND FUNCTIONS.................................................................... 14 AC ADAPTER ......................................................................................................... 14 BATTERY ............................................................................................................... 14 OPTIONAL DEVICES ............................................................................................... 15 BASIC OPERATION ............................................................................................. 17 START PROGRAMS ................................................................................................. 17 CALIBRATE TOUCH SCREEN................................................................................... 17 SETTING POWER..................................................................................................... 17 ADJUST VOLUME ................................................................................................... 18 CHARGE BATTERY ................................................................................................. 18 SWAP BATTERY ..................................................................................................... 19 SET YOUR OWN BUTTON FUNCTIONS .................................................................... 21 BACKUP DATA ....................................................................................................... 21 DATA SYNC ........................................................................................................... 22 CRADLE (OPTIONAL) .............................................................................................. 23 PCMCIA SLOT (MAY NOT BE AVAILABLE ON ALL MODELS) .................................. 24 SD SLOT ................................................................................................................ 24 GPS (OPTIONAL).................................................................................................... 25 DIGITAL COMPASS (OPTIONAL).............................................................................. 25 (POCKET PC DEDICATED INSTRUCTIONS) ............................................................... 26 GET HELP .............................................................................................................. 26 CALIBRATE TOUCH SCREEN................................................................................... 26 ADJUST VOLUME ................................................................................................... 26 SET YOUR OWN BUTTON FUNCTIONS .................................................................... 26 TODAY SCREEN...................................................................................................... 27 FIND A FILE ........................................................................................................... 27 REMOVE PROGRAMS .............................................................................................. 27 MANAGE CERTIFICATES......................................................................................... 28 INPUT ..................................................................................................................... 28 MENUS ................................................................................................................... 28 OWNER INFORMATION ........................................................................................... 28 PASSWORD ............................................................................................................. 29 SOUNDS & NOTIFICATIONS .................................................................................... 29 CLOCK ................................................................................................................... 29 MEMORY................................................................................................................ 29 POWER ................................................................................................................... 30 SPECIFICATIONS................................................................................................. 31 CPU....................................................................................................................... 31 MEMORY................................................................................................................ 31 DISPLAY................................................................................................................. 31 TOUCH SCREEN ...................................................................................................... 31 I/O PORTS .............................................................................................................. 32 SYSTEM UNIT DIMENSIONS AND WEIGHT .............................................................. 32 AC ADAPTER ......................................................................................................... 33 BATTERY ............................................................................................................... 33 MATERIALS AND RECYCLING................................................................................. 34 ENVIRONMENTAL RATINGS.................................................................................... 35 MAINTENANCE / SERVICE ............................................................................... 36 CLEANING .............................................................................................................. 36 TROUBLESHOOTING ............................................................................................... 36 RMA SERVICE ....................................................................................................... 37 Getting Started GETTING STARTED Unpacking The following components come with your handheld computer. If anything is missing or damaged please notify the dealer immediately. • Handheld computer unit Getting Started • • • • • • AC adapter AC power cord Stylus Data sync cable (USB) User's guide Utility CD Getting Started Quick Check • • • • • • • • Attach the AC adapter to AC outlet. The adapter LED indicates the power is ready. Plug the adapter to the handheld computer. The charge LED may light up indicating battery charging if battery is not full. Turn ON the computer by pressing the power button momentarily. Test with stylus operations Adjust backlight brightness: Tap Start Æ Settings Æ Control Panel ÆSystem Console Æ Backlight Level, adjust the brightness level as desired. ( = Start) Adjust backlight timeout: In the same window adjust the timeout period as desired. Timeout is the idle time that the LCD backlight would turn OFF automatically. Press the power button for > 1 second to turn LCD backlight OFF or ON Press power button momentarily to turn OFF computer. Getting Started Controls, Indicators, and Ports Front: Getting Started 1. 2. 3. 4. 5. 6. 7. 8. Wireless ON/OFF (Flight button) Turn ON/OFF the wireless device (Wireless device WLAN, GPRS, Bluetooth, etc. are optional) Please turn it OFF at locations with wireless control (hospital, onboard airplane, etc.) Button 1 (User programmable) Button 2 (User programmable) Cursor Control [Left], [Right], [Up], [Down] 4 directions [Enter] at the center Button 3 (User programmable) Button 4 (User programmable) Power Button Press momentarily turns the power ON or OFF. Press > 1 second turns LCD backlight ON or OFF (actually power OFF is “suspend” only, the battery is still backing up memory data) Power indicator Getting Started Battery charge indicator 9. Wireless indicator 10. Note: You may change the functions of button 1~4. Refer “Basic Operations” “Set Your Own Button Functions” for details. Getting Started Rear: Getting Started 1. 2. 3. 4. 5. 6. 7. Speaker (under hand strap) Master switch Turns OFF all power including backup battery. All data in RAM will be lost when turned OFF. The switch is for troubleshooting or emergency only. Stylus Reset Button Soft reset: Press the reset button to warm-boot. After reset the data remains intact. Hard reset: Press the reset button and power button simultaneously. Hard reset clears all data, all settings, then cold-boot. After reset need to calibrate touch screen, do set up, etc. again, but RAM data can not be recovered. Battery knob Battery Microphone (optional) Getting Started Left: 1. 2. 3. 4. Antenna (optional) Wireless device antenna USB client port For data sync with another computer USB port Kensington lock slot Getting Started Right: 1. 2. 3. 4. Microphone/Earphone jack Infrared port (IR, optional) SD card slot (Secured Digital card) 2nd antenna (optional) 10 Getting Started Top: 1. Serial port (serial port may be occupied by internal device) Bottom: 11 Getting Started 1. 2. 3. DC jack PCMCIA slot (maybe not available on some models) One PCMCIA type II slot CF (Compact Flash card) connectivity is possible by PCMCIA-to-CF adapter (optional) Cradle docking connector Connection to cradle 12 Getting Started Operating Environment and Ruggedness A clean and moisture-free environment is preferred. If it is necessary to work in a hostile environment, please make sure all ports are well protected from dust, moisture, or water. Proper isolation from extreme hazardous exposure is recommended. The computer is designed with rugged features of vibration, shock, dust, and rain/water protection. However, it is still necessary to provide appropriate protection while exposing to harsh environments. All connectors will decay or corrode if exposed to water or moisture. Corrosion is accelerated if the power is ON. Please take proper water-resistant measures for cable connections. The DC jack is sealed type which may be operated with water splashing while DC power cord attached. All other port caps should be in place when no cable is attached. Regularly maintain the computer by cleaning dust, water, etc. will help keeping it in optimal condition. Warning: There is no isolated compartment in SD slot, PCMCIA slot, and docking. These ports must be tightly sealed while working with dust/water. 13 Components and Functions COMPONENTS AND FUNCTIONS AC adapter When using the AC adapter: • Use a properly grounded AC outlet. • Use one AC outlet exclusively for the computer. Having other appliances on the same line may cause interference. • Use a power strip with built-in surge protection. The AC adapter automatically detects the AC line voltage (110V or 220V) and adjusts accordingly. Battery The computer will automatically switch to battery power when the external power source (AC adapter) is disconnected. Battery Power Saving Tips • Turn OFF the LCD backlight when it is visible with external light • Lower the intensity of the backlight 14 Components and Functions • Shut down the computer when not to use for a longer time Battery Low When the battery is nearly exhausted, the computer prompts a window warning it. Once the Battery Low warning occurs, please do either or all of the following: 1. Save and close the files you are currently working on 2. Plug in the AC adapter to recharge the battery 3. Swap a charged battery Optional Devices Note: Not all options are available on all models. Cradle For docking, port extension, battery-charging. Spare Battery Exactly the same as primary battery. Wireless LAN (Local Area Network) IEEE 802.11b wireless LAN card 15 Components and Functions GPRS (General Packet Radio Service) Wireless voice and data communication Bluetooth Short-range wireless data communication GPS (Global Positioning System) Positioning your location by GPS satellite signals Digital Compass Solid-state compass with digital readout and graphic display 16 Basic Operation BASIC OPERATION (Pocket PC dedicated instructions are listed on later pages of this section) Start Programs ( = Start) Tap Start Æ Programs Æ (desired programs) Or tap Start Æ Windows Explorer Æ (desired programs) Calibrate Touch Screen Tap Start Æ Settings Æ Control Panel Æ Stylus to calibrate. Use pen to touch the center of mark ”＋” and repeat the action when the mark ”＋” moves. Tap the screen to confirm when finished. Setting Power Tap Start Æ Settings Æ Control Panel Æ Power, set the length of idle time for computer to shut down automatically. 17 Basic Operation Setting LCD Adjust backlight brightness: Tap on Start Æ Settings Æ Control Panel Æ System Console Æ Backlight Level, adjust the brightness level as desire. Setting backlight timeout: In the same window adjust the timeout period as desired. Timeout is the idle time that the LCD backlight would turn OFF automatically. Adjust Volume Tap Start Æ Settings Æ Control Panel Æ Volume & Sounds, adjust the volume level as desired. Charge Battery Plug in AC adapter will charge the battery automatically. If the battery is already full, the system will stop charge automatically. Dock to optional cradle + adapter will charge battery, too. Cradle has a battery slot to charge another battery externally. 18 Basic Operation Swap Battery To swap the battery: 1. 2. 3. 4. 5. 6. Turn power OFF Turn the battery knob counterclockwise to loose the battery Remove battery from compartment Insert a new battery Press the battery down and turn battery knob clockwise to lock it Press power button to turn ON the computer 19 Basic Operation Note: During battery swap the memory data is sustained by a small backup battery. Please swap battery within 1 minute to avoid data loss. 20 Basic Operation Set Your Own Button Functions The lower four buttons are user-programmable. Tap Start Æ Settings Æ Control Panel Æ System Console Æ Buttons Define the button functions from the selection list. Other buttons are not user-programmable. Backup Data There are two types memory on the computer: Temporary memory RAM (Random Access Memory) and permanent memory ROM (Read Only Memory). Optional memory cards act like ROM. Most data of ongoing program are stored in RAM. It would stay intact when power turns OFF. (Actually pressing power button OFF/ON is “suspend/resume” only. Part of the computer is still running, power supply to memory is always ON.) However, data or program in RAM will be lost when hardware reset or master switch turns OFF. And if primary battery been removed for too long time (for example, swap battery for >1 minutes), there are risks to lose RAM data as back up battery may run exhausted. Long time storage will drain primary and backup battery to exhaust thus unable to keep memory data. 21 Basic Operation To avoid data loss you may move data into ROM or memory card as follows: Tap and hold the file to pop up the small menu. Tap Copy then browse to Flash Disk (ROM) or memory card folder. Tap and hold to pop up the small menu, tap Paste. Flask Disk folder: Tap Start Æ Programs Æ Windows Explorer Æ Flash Disk Data Sync You may transmit/receive data between this handheld computer and other computers via data sync. Install Microsoft ActiveSync utility on host computer. Connect handheld computer and host computer with the USB cable. Follow the prompt to execute data sync. Perform Copy, Paste, Cut, Delete, etc. same as PC. Note: ActiveSync run on Windows CE prompts “Failed to Set Up Partnership” because it’s designed for Pocket PC only. However, it still works despite the message 22 Basic Operation Cradle (optional) Cradle is the device for docking, port extension, and battery charging. AC adapter may attach directly to cradle and charges the computer battery as well as spare battery. There is a battery slot on the back of cradle to mount spare battery. Mount the cradle: 1. Computer may dock either power is ON or OFF (recommend OFF) 2. Open the rubber cap on the docking connector 3. Align the computer with cradle docking connector 4. Firmly push the computer down to engage the docking connector 5. Turn rotary latch to fix the computer Remove from the cradle: 1. Turn loose the rotary latch to release computer 2. Pull away the computer either power is ON or OFF 23 Basic Operation Mount spare battery: (spare battery is optional) Perform the same procedure as mounting primary battery on computer. Cradle will charge computer and spare battery simultaneously. PCMCIA Slot (may not be available on all models) The computer accepts one type-II PCMCIA card. Insert the card firmly into the slot and fix the rubber cover for water/dust protection. To remove the card, push the eject button to pop out the card. The eject button can hide into the compartment by pushing it inward gently. May need to load PCMCIA card driver to enable the function. Note: If the computer is working with dust, moisture, or water, be sure to fix the PCMCIA rubber cap tightly with screws. SD Slot The computer accepts one SD card (Secured Digital Card). Insert the card firmly into the slot and fix the rubber cover for water/dust protection. To remove the card, push the eject button to release it. Note: If the computer is working with dust, moisture, or water, be sure to fix the 24 Basic Operation SD rubber cap tightly with screws. GPS (optional) Tap Start Æ Program Æ Windows Explorer Æ (map software) to start GPS. Digital Compass (optional) Tap Start Æ Program Æ Windows Explorer Æ Digital Compass to start digital compass Calibration: Tap Calibration on compass window, hold computer horizontally and turn 360º two times, the compass will calibrate automatically. Stay away from metal or magnetic field. The compass may be interfered by them. 25 Basic Operation (Pocket PC Dedicated Instructions) Get Help Tap Start Æ Help Select the help information needed. Calibrate Touch Screen Tap Start Æ Settings Æ System Æ Screen Æ Align Screen to calibrate. Adjust Volume Tap Start Æ Settings Æ Personal Æ Sounds & Notifications, adjust the volume level as desired. Set Your Own Button Functions Tap Start Æ Settings Æ Personal Æ Buttons Define the button functions from the selection list 26 Basic Operation Today Screen The today screen displays information of today’s appointments and status icons, etc. Tap the information listed on today screen to execute the associated program. Tap Start Æ Today to enter Today screen. Find A File Tap Start Æ Find In Find, enter the file name, word, or other information you want to search for, If you have looked for this item before, tap the Find arrow and select the item from the list. In Type, select a data type to help narrow your search. Tap Go, My document folder and subfolder are searched in the results list. Remove Programs Tap Start Æ Settings Æ System Æ Remove Programs and follow the prompts to delete. 27 Basic Operation Manage Certificates Tap Start Æ Settings Æ System Æ Certificates Input your certificates. To delete a certificate, tap and hold it in the list, and then tap Delete. Input Tap Start Æ Settings Æ Personal Æ Input On the input method tab, select an input method and change the desired options. Menus Tap Start Æ Settings Æ Personal Æ Menus and select the items you want to appear on Start Menu. Owner Information Tap Start Æ Settings Æ Personal Æ Owner Information and follow the descriptions. On the identification tab, enter your personal information. Select “Show information when device is turn on” your information will be displayed at power ON. 28 Basic Operation Password Tap Start Æ Settings Æ Personal Æ Password and follow the descriptions. Sounds & Notifications Tap Start Æ Settings Æ Personal Æ Sound & Notification and set your favorite notifications. Clock Tap Start Æ Settings Æ System Æ Clock. Memory Tap Start Æ Settings Æ System Æ Memory and follow the descriptions. The main tab displays the amount of memory the system has allocated to file and data storage versus the available memory. The storage card tab displays how much memory is available on a storage card that is inserted in your device. The running programs tab displays the list of the currently active programs. You can stop a program by selecting it in the list and tapping stop. 29 Basic Operation Power Tap Start Æ Settings Æ System Æ Power The Battery tab displays the amount of battery power remaining. 30 Specifications SPECIFICATIONS CPU Intel XScale PXA255 CPU speed 400MHz Memory System RAM System ROM 128MB 64MB Display Type: Resolution: Mode: Color: Backlight: 4” Active TFT Transflective Color LCD 480 x 640 pixels or 240 x 320 VGA or QVGA 256 for VGA or 64K for QVGA LED Touch Screen Type: Resistive 31 Specifications Interface: Resolution: Serial >480 x 640 I/O ports USB port (USB 1.1 compatible) USB client port Serial port Audio ports (Microphone/Earphone) PCMCIA slot (type II x 1) SD slot System Unit Dimensions and Weight Width: Depth: Height: Weight: 90mm (W 3.5”) 150mm (H 5.9”) 33mm (D 1.3”) 450g (15 oz.) 32 Specifications AC Adapter Voltage: Frequency: Output Voltage: Maximum Power: Dimension: Weight: AC 90~240 V 50/60 Hz DC 10V 3.5A 35 Watts 108mm (4.2” W) x 56mm (2.2” D) x 34mm (1.3” H) 270 g (9.5 oz.) Battery Type: Capacity: Dimension: Weight: Lithium Ion 7.4V 1800mAH 71mm (W 2.8”) x 64mm (D 2.5”) x 12.3mm (H 0.5”) 108 g (3.8 oz.) 33 Specifications Materials and Recycling Materials of the computer are as follows: Cabinet: Aluminum alloy ADC-12 or A380, Magnesium alloy AZ91D, UL grade PC+ABS GE C6200 or TN-3813BW Bracket: Aluminum 5052 Steel with Nickel plating Stainless Steel S304 Cushion pad: Nature rubber PCB: FR-4, UL 94V0 Battery: Rechargeable Lithium Ion Packing: Carton: Unbleached paper User's Guide: Recycled/Recyclable paper Please recycle the parts according to local regulations. 34 Specifications Environmental Ratings Temperature: Humidity: Altitude: DA04I: 0ºC ~ 45ºC (32ºF ~ 113ºF) operating -20ºC ~ 60ºC (-4ºF ~ 140ºF) storage DA04M: -20ºC ~ 50ºC (-4ºF ~ 122ºF) operating -40ºC ~ 70ºC (-40ºF ~ 158ºF) storage 5 ~ 95% Non-condensing operating 95% maximum storage 0 ~ 12,180 meters (0 ~ 40,000 feet) operating and storage 35 Maintenance/Service MAINTENANCE / SERVICE Cleaning Always turn OFF the power, unplug the power cord and remove the battery before cleaning. The exterior of the system and display may be wiped with a clean, soft, and lintfree cloth. If there is difficulty removing dirt, apply non-ammonia, non-alcohol based glass cleaner to the cloth and wipe. An air gun is recommended for cleaning water and dust. For salty water please wipe with fresh water then blow-dry with an air gun. Close all caps tightly before water cleaning. Troubleshooting Should the computer fail to function properly, you may try the following troubleshooting steps: (Please backup your data before troubleshooting) • Check AC adapter, battery, and the power source. • Press hardware reset to re-boot the computer. 36 Maintenance/Service • • Turn OFF the master switch for a while then turn ON and re-boot. Remove the software suspected. RMA Service If troubleshooting is unsuccessful, please consult your dealer for service If it is necessary to send in the computer for repairs, please follow the dealer’s instructions for RMA# procedure. Shipping instructions: 1. Use the original shipping container and packing materials, if possible. 2. If the original packing materials are not available, wrap the equipment with soft material (e.g., PU/ PE form) then put the wrapped equipment into a hard cardboard shipping box. 3. Include a sheet with the following information: (Note: please keep a copy for your record) • Name • Address 37 Maintenance/Service • • • • • 4. 5. Unit serial number Place and date of purchase or the original invoice number Date of failure A DETAILED description of the problems you have encountered A list of the hardware/software configuration, if applicable. Clearly mark the outside of the shipping box with the RMA number. This will facilitate faster processing and avoid faulty return. Unless prior arrangements have been made, the customer is responsible for all shipping costs. Unauthorized use of the company’s shipping accounts is not permitted. 38 Recycled / Recycleable Printed in Taiwan
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:02:17 13:52:24+08:00 Create Date : 2005:01:14 18:10:53+08:00 Page Count : 52 About : uuid:9e963fc3-1c96-4bf1-855e-ca5c1939a4f1 Producer : Acrobat Distiller 6.0 (Windows) Creation Date : 2005:01:14 18:10:53+08:00 Mod Date : 2005:02:17 13:52:24+08:00 Author : jamesbai Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2005:02:17 13:52:24+08:00 Document ID : uuid:94c8b9a5-b0c9-448f-973b-34472a713963 Format : application/pdf Title : Microsoft Word - manual.doc Creator : jamesbaiEXIF Metadata provided by EXIF.tools