Mitsumi Electric Co DWMW028 Wireless LAN module User Manual final Host

Download:
Mirror Download [FCC.gov]
Document ID	1468632
Application ID	dC2aXvw029F6mR9NyJ3Czw==
Document Description	Rev. Host User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.16kB (39494 bits)
Date Submitted	2011-05-19 00:00:00
Date Available	2011-10-24 00:00:00
Creation Date	2011-05-20 11:17:04
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2011-05-20 11:17:04
Document Title	Microsoft Word - final-Host User Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	kaminosono_takuya

REGULATIONS FOR EQUIPMENT USE IN U.S.A. AND CANADA
FCC and Industry Canada Information
In order to comply with FCC radio-frequency radiation exposure guidelines for an
uncontrolled exposure, this device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept interference received, including interference that may cause
undesired operation.
Le présent appareil respecte l'article 15 des règlements de la FCC et CNR d'Industrie
Canada applicables aux appareils radio exempts de licence. Son utilisation est sujet aux
deux conditions suivantes :
(1) Ce appareil ne doit pas causer d'interférence nuisible, et
(2) ce appareil doit accepter toute interférence extérieure, y compris celle pouvant
entraîner un mauvais fonctionnement.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, only the
authorized antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that required for successful
communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
The user may find the following booklet prepared by the Federal Communications
Commission helpful: How to Identify and Resolve Radio-TV Interference Problems.
This booklet is available from the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.
L'utilisateur pourrait trouver utile de consulter une brochure préparée par la
Federal Communications Commission américaine : How to Identify and Resolve
Radio-TV Interference Problems. Elle est offerte par le U.S. Government Printing
Office, Washington, D.C. 20402, no de stock 004-000-00345-4.
The term IC before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
Les lettres «IC» placées devant un numéro de certification ou d'enregistrement
signifient seulement que le produit respecte les spécifications techniques
d'Industrie Canada.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2011:05:20 11:17:04+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:05:20 11:17:04+09:00
Format                          : application/pdf
Creator                         : kaminosono_takuya
Title                           : Microsoft Word - final-Host User Manual.doc
Document ID                     : uuid:b3b1d773-db82-4f1d-9eac-b26e7a4cbbaa
Instance ID                     : uuid:446e8de5-5775-49d6-b292-b0b36b864884
Page Count                      : 2
Author                          : kaminosono_takuya

EXIF Metadata provided by EXIF.tools