Mitsumi Electric WML-C06 WML-C06 Bluetooth User Manual Functional Description fcc r1 0

Download:
Mirror Download [FCC.gov]
Document ID	157014
Application ID	9LKkyAOa4t3hawQn0LuH0Q==
Document Description	technical description
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.94kB (61809 bits)
Date Submitted	2001-06-28 00:00:00
Date Available	2001-11-29 00:00:00
Creation Date	2001-06-22 15:22:34
Producing Software	Acrobat PDFWriter 4.05 Windows
Document Lastmod	2001-06-22 17:05:24
Document Title	æ©¡Functional_Description_fcc_r1.0.doc
Document Creator	æ©¡Microsoft Word
Document Author:	æ©¡Furuhashi_Yoichiro

Functional Description
22/Jun/2001
MITSUMI
Bluetooth Module “ WML-C05XX”
Ultra-small and thin size achieved through
use of high density mounting technology.
1. APPLICATIONS
Notebook PCs, mobile phones, digital cameras, PC peripherals, PDA.
2. DESCRIPTIONS
Wireless communication module conforming to Bluetooth Ver.1.0B.
3. FEATURES
1) Ultra-small and thin size achieved through use of high density mounting
technology.
2) SMD type can be surface mounted.
3) High sensitivity supports communications of up to 1 0 m.
4) UART, USB and PCMIF interfaces enable wide range of applications.
5) Conforms to FCC, CE and other countries’ EMI standards.
6) Supports Bluetooth Class2.
7) In order to make stable performance, inside of module has voltage regulator.
Note) The BLUETOOTH trademarks are owned by Telefonaktiebolaget L M,
Ericsson, Sweden.
4. SPECIFICATIONS
Item
Frequency
ModulatIon
Channel intervals
Number of channels
Power supply voltage
Transmission rate
Receive sensitivity
Output level (Class2)
SpecIfIcatIons
2402 to 2480 MHz
FHSS / GFSK
1 MHz
7 9 CH
3.0 V (typ.), 2.9 ~ 3.4V
7 2 1 kbps
-88 dBm typ.
4 dBm max.
TM
©1998-2000 MITSUMI Electronics Corp. All rights reserved. MITSUMI is a trademark of MITSUMI
Electronics Corporation.
Other company names and products names are trademarks of their respective companies.
Product specifications are subject to revisions or changes without notification.
5. TERMINAL DESCRIPTION
No.
Symbol
I/O
Description
PIO [0] / RXEN
Control output for external LNA (=PIO [0] )
PIO [1] / TXEN
Control output for external PA (=PIO [1] )
GND
Ground
GND
Ground
PIO [4] / IRQ1
I/O
Programmable I/O line/Interrupt request1
PIO [5] / IRQ2
I/O
Programmable I/O line/Interrupt request2
PIO [6]
I/O
Programmable I/O line
PIO [7]
I/O
Programmable I/O line
PCM_OUT
Synchronous PCM data out
10
PCM_CLK
I/O
Synchronous PCM data clock
11
PCM_IN
Synchronous PCM data input
12
PCM_SYNC
I/O
Synchronous data strobe
13
GND
Ground
14
VDD
Supply voltage 3.0
15
GND
Ground
16
SPI_CSB
Chip select for Synchronous Serial Interface
17
SPI_MOSI
Synchronous Serial Interface data input
18
SPI_CLK
Synchronous Serial Interface Clock
19
SPI_MISO
Synchronous Serial Interface data output
20
UART_CTS/USB_D-
Asynchronous serial data CTS/USB Data-
21
UART_RTS/USB_D+
Asynchronous serial data RTS/USB Data+
22
UART_RX
Asynchronous serial data input
23
UART_TX
Asynchronous serial data output
24
PIO [3]
I/O
Data line for EEPROM
25
PIO [2]
CLOCK for EEPROM
26
RST
Not Available
27
GND
28
ANT
Ground
I/O
RF input/output
6. BLOCK DIAGRAM
VDD
16MHz
ANT
XT Driver
REG
RAM
UART/
USB
2nd Synthesizer
BPF
RF Receiver
SW
Balun
BasebandController
MemoryManagement
UART_TX
UART_RX
UART_RTS/USB
D+
UART_CTS/USB D-
SPI
SPI_CSB
SPI_CLK
SPI_MOSI
SPI_MISO
PCM/IF
PCM_OUT
PCM_IN
PCM_SYNC
PCM_CLK
RF Transmitter
MEMORY
DRIVER
1st Synthesizer
16bits MicroProcessor
PIO
TX_EN
RX_EN
FLASH
ROM
256kx16
BC01b1
PIO [0], … ,PIO [7]
7. PCM IF
PCM_OUT, PCM_IN, PCM_CLK, PCM_SYNC carry one of bi-directional channel of voice
data using 13bits PCM at 8ks/s.
PCM_SYNC operates at a fixed clock frequency of 8kHz.
PCM_CLK operates at a fixed clock frequency of 256kHz.
Bits 1 to 13 of the PCM_OUT data carry the current output sample value.
Bits 14 to 16 carry a three bit signal level value.
Reference PCM audio device is MC145483.
8. PIO PORT
The PIO port is general purpose IO interface and the ports consists of 8 programmable,
Bi-directional PIO [0:7]. The maximum current drive capability is 4mA.
PIO [0], PIO [1] are recommended to be open if they are not used.
9. FCC Compliance and Advisory Statement
FCC Part 15.19)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC Part 15.21 and 15.105)
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:--Reorient or relocate the receiving antenna.--Increase the
separation between the equipment and receiver.--Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. --Consult the dealer or an
experienced radio/TV technician for help.
10. OVERALL APPEARANCE
Module without antenna WML-C05NX
Module with antenna WML-C05AX

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : .橡.Microsoft Word
Create Date                     : 2001:06:22 15:22:34
Title                           : .橡.Functional_Description_fcc_r1.0.doc
Author                          : .橡.Furuhashi_Yoichiro
Producer                        : Acrobat PDFWriter 4.05 Windows
Modify Date                     : 2001:06:22 17:05:24+09:00
Page Count                      : 5

EXIF Metadata provided by EXIF.tools