Mitsumi Electric WML-C07 Bluetooth module WML-C07## User Manual functional description
Mitsumi Electric Co., Ltd. Bluetooth module WML-C07## functional description
functional description
Functional Description 20/Sep/2001 MITSUMI Bluetooth Module “ WML-C07##” Hardware:Version 1 Ultra-small and thin size achieved through use of high density mounting technology. 1. APPLICATIONS Notebook PCs, mobile phones, digital cameras, PC peripherals, PDA. 2. DESCRIPTIONS Wireless communication module conforming to Bluetooth Ver.1.1. 3. FEATURES 1 ) Ultra-small and thin size achieved through use of high density mounting technology. 2 ) High sensitivity. 3 ) UART, USB and PCMIF interfaces enable wide range of applications. 4 ) Conforms to FCC, CE and other countries’ EMI standards. 5 ) Supports Bluetooth Class1. Note)The BLUETOOTH trademarks are owned by Telefonaktiebolaget L M, Ericsson, Sweden. 4. SPECIFICATIONS Item Frequency Modulation Channel intervals Number of channels Power supply voltage Transmission rate Receive sensitivity Output level (Class1) Specifications 2402 to 2480MHz FHSS / GFSK 1MHz 79CH 3.3V(typ.) ,3.2 to 3.4V 721kbps -85dBm typ. 20dBm max. TM ©1998-2000 MITSUMI Electronics Corp. All rights reserved.MITSUMI is a trademark of MITSUMI Electronics Corporation. Other company names and products names are trademarks of their respective companies. Product specifications are subject to revisions or changes without notification. 5. TERMINAL DESCRIPTION No. Symbol GND I/O Description Ground UART_RX** UART Data Input SPI_MISO Synchronous Serial Interface data output (N.C.*) SPI_CLK** Synchronous Serial Interface clock (N.C.*) SPI_MOS**I Synchronous Serial Interface data input (N.C.*) PIO 4/USB_ON I/O Programmable I/O line Chip select for Synchronous Serial Interface (N.C.*) SPI_CSB** PCM_CLK I/O Synchronous PCM data clock PIO 5/USB_DETACH I/O Programmable I/O line 10 PIO 6 I/O Programmable I/O line 11 VDD_PA Supply for Internal Power Amp (3.3V+/-0.1V). 12 VDD Supply for VDD (3.3V+/-0.1V) 13 UART_CTS/USB_D- UART Clear To Send 14 UART_RTS/USB_D+ UART Ready To Send 15 UART_TX UART Data Output 16 PIO 3/USB_WAKE_UP I/O Programmable I/O line 17 PIO 2/USB_PULL_UP I/O Programmable I/O line 18 PIO 7 I/O Programmable I/O line 19 PCM_SYNC I/O Synchronous data strobe 20 PCM_IN Synchronous PCM data input 21 PCM_OUT Synchronous PCM data output 22 RESET_IN Reset pin (N.C.*) ANT I/O * N.C.=OPEN **5V tolerant input terminal. RF input/output 6. BLOCK DIAGRAM VDD_PA ANT Connector 16MHz XT Driver VDD REG RAM UART_TX UART/ UART_RX UART_RTS/USB D+ UART_CTS/USB D- USB BPF 2 Synthesizer nd SPI_CSB SPI RF Receiver SPI_MOSI SPI_MISO BasebandController SW Balun RF Transmitter MemoryManagement PCM/IF PCM_OUT PCM_IN PCM_SYNC 1st Synthesizer 16bits MicroProcessor MEMORY DRIVER PIO TX_EN RX_EN SPI_CLK PCM_CLK FLASH ROM 256kx16 BC01b-UART / BC01b-USB PIO(0),..PIO(7) 7. PCM IF PCM_OUT, PCM_IN, PCM_CLK, PCM_SYNC carry one of bi-directional channel of voice data using 13bits PCM at 8ks/s. PCM_SYNC operates at a fixed clock frequency of 8kHz. PCM_CLK operates at a fixed clock frequency of 256kHz. Bits 1 to 13 of the PCM_OUT data carry the current output sample value. Bits 14 to 16 carry a three bit signal level value. Reference PCM audio device is MC145483. 8. OVERALL APPEARANCE
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2001:10:30 20:36:15 Producer : Acrobat Distiller 4.05 for Windows Modify Date : 2001:10:30 20:36:15+09:00 Page Count : 4EXIF Metadata provided by EXIF.tools