Mitsumi Electric WML-C68 Bluetooth Module User Manual

Mitsumi Electric Co., Ltd. Bluetooth Module

User Manual

Page 1 of 4
WML-C68_User_Manual
18. Jun. 2012
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
WML- C68 User Manual
The purpose of this manual is to explain correct way how to integrate module WML-68 to the end product.
It includes procedures that shall assist you to avoid unforeseen problems.
This manual presents information that shows how module and OEM product, where module integrated,
complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer
could void the authority to operate in these regions.
Content
1.General
2. European Community Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC
3. FCC Regulatory Information
4. Canada-Industry Canada (IC)
1. General
This Bluetooth radio module has to be installed and used in accordance with the technical
description/installation instructions provided by the manufacturer.
This Bluetooth radio module is intended to be placed on the market in all States, where
the Bluetooth™ technology and the used frequency band is released.
For detail information concerning type approval of this module (e.g. where this module is
already pre-approved) please contact the manufacturer.
The system may only be implemented in the configuration that was authorized.
Note that any changes or modifications to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate this equipment.
h
is material m
a
w
p
ean Co
m
ive 1999
/
TSUMI de
c
n
ts and othe
m
ent is mar
k
t
es complia
n
p
ecification
s
8
, Electrom
a
D
ata transmi
s
; Harmoniz
e
9
-17, Electr
o
i
ty (EMC) st
a
H
YPERLAN
1, Safety of
A
ssessme
n
g
netic fields
(
E
xposure
e
must not b
e
E
xposure e
v
c
al docume
n
TSURUM
A
MI ELECT
R
N
EERING D
E
DULE BU
S
8
1-42-310-5
6
8
1-42-310-5
a
y not in wh
o
w
ithout MIT
S
m
munity
/
5/EC
c
lares that
T
r relevant p
r
k
ed with the
n
ce with the
s
:
a
gnetic com
s
sion equip
m
e
d EN cove
r
o
magnetic
C
a
ndard for r
a
Equipment.
Information
n
t of electro
n
(
0 H
z
-300
G
to Radio
F
e
co-locate
d
v
aluation.
n
tation as r
e
A
KI, TAMA-
S
R
IC CO.,LT
D
E
P
T
MENT
S
INESS DIV
I
6
91
582
COMM
E
le or part be
c
S
UMI ELEC
T
Declarat
T
he Mitsum
i
r
ovisions of
D
sym
b
R&TTE Dir
e
patibility an
d
m
ent operat
i
r
ing essenti
a
C
ompatibilit
y
a
dio equip
m
Technolog
y
n
ic and elec
t
G
Hz).
F
requency
d
or operati
n
e
quired by t
h
S
HI, TOKY
O
D
.
I
SION
E
RCIAL IN C
O
c
opied, stored
T
RIC CO., L
T
t
ion of C
o
i module
W
Directive 1
9
b
ol and can
e
ctive 1999
/
d
Radio spe
ing in the 2,
4
a
l requirem
e
y
and Radio
m
ent and se
r
y
Equipmen
t
t
rical equip
m
y
Radiatio
n
n
g in conjun
c
h
e Conformi
t
O
, 206-8567
O
NFIDENC
E
electronicall
y
T
D’s
p
rior agr
e
o
nformit
y
W
ML-C68 is
9
99/5/EC.
b
e used thr
o
/
5/EC and
m
ctrum Matt
e
4
GHz ISM
nts under a
r
spectrum
M
r
vices; Part
1
t
.
m
ent related
n
.
c
tion with a
n
t
y Assessm
e
JAPAN.
E
y
o
r
communi
c
e
ement in wri
y
with R
e
i
n complian
c
o
ughout the
m
eets the rel
e
rs (ERM);
W
b
and and u
s
rt
icle 3.2 of
t
M
atters (ER
M
1
7: Specific
to human e
x
n
y other ant
e
e
nt procedu
WML-C6
8
i
cated to third
i
ting.
e
gard to
t
c
e with the
e
European
c
l
evant parts
W
ideband tr
a
s
ing wide b
a
t
he R&TTE
D
M
); Electrom
Conditions
f
xposure re
s
e
nna or tran
s
re is kept at
Page 2
o
8
_
User_Ma
n
18. Jun. 2
0
parties
t
he R&T
T
e
ssential
c
ommunity.
of following
a
nsmission
a
nd modula
t
D
irective
agnetic
f
or Wideba
n
s
trictions for
s
mitter, with
the followin
o
f 4
n
ual
0
12
T
E
t
ion
n
d
out
g
Page 3 of 4
WML-C68_User_Manual
18. Jun. 2012
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
3. FCC Regulatory Information
Caution:
Any changes or modifications not expressly approved by the party responsible for product compliance could
void the user's authority to operate the equipment.
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must
be maintained between the antenna of this device and all persons. This device must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Labelling
MITSUMI Bluetooth module WML-C68 is labeled as below.
FCC ID: POOWML-C68
If FCC ID is not visible when the module is installed into the system, “Contains FCC ID:
POOWML-C68” shall be placed on the outside of final host system.
Page 4 of 4
WML-C68_User_Manual
18. Jun. 2012
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
4. Canada-Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of this device.
L ‘ utilization de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be
maintained between the antenna of this device and all persons. This device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Labelling
MITSUMI Bluetooth module WML-C68 is labeled as below.
IC ID: 4250A-WMLC68
If IC ID is not visible when the module is installed into the system, “Contains IC ID:
4250A-WMLC68” shall be placed on the outside of final host system.

Navigation menu