Mitsumi Electric WML-C68 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1732688
Application ID	I+KdHgAPTMEhOkDO6m1rag==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.98kB (87208 bits)
Date Submitted	2012-06-28 00:00:00
Date Available	2012-06-28 00:00:00
Creation Date	2012-06-25 13:15:05
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2012-06-25 13:15:05
Document Title	User Manual
Document Creator	PScript5.dll Version 5.2.2

Page 1 of 4
WML-C68_User_Manual
18. Jun. 2012
WML- C68 User Manual
The purpose of this manual is to explain correct way how to integrate module WML-68 to the end product.
It includes procedures that shall assist you to avoid unforeseen problems.
This manual presents information that shows how module and OEM product, where module integrated,
complies with regulations in certain regions. Any modifications, not expressly approved by the manufacturer
could void the authority to operate in these regions.
Content
1.General
2. European Community Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC
3. FCC Regulatory Information
4. Canada-Industry Canada (IC)
1. General
This Bluetooth radio module has to be installed and used in accordance with the technical
description/installation instructions provided by the manufacturer.
This Bluetooth radio module is intended to be placed on the market in all States, where
the Bluetooth™ technology and the used frequency band is released.
For detail information concerning type approval of this module (e.g. where this module is
already pre-approved) please contact the manufacturer.
The system may only be implemented in the configuration that was authorized.
Note that any changes or modifications to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate this equipment.
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
Page 2 of
o 4
WML-C68
8_User_Man
nual
18. Jun. 20
012
pean Com
mmunity Declarattion of Co
onformity
y with Re
egard to the
t R&TT
TE
ive 1999//5/EC
TSUMI decclares that The
T Mitsumii module WML-C68
is in compliancce with the essential
nts and other relevant prrovisions of D
Directive 19
999/5/EC.
ment is markked with the
symb
bol and can be used thro
oughout the European community.
tes complian
nce with the R&TTE Dire
ective 1999//5/EC and meets
the rellevant parts of following
pecificationss:
8, Electroma
agnetic compatibility and
d Radio spectrum Matte
ers (ERM); W
Wideband tra
ansmission
Data transmisssion equipm
ment operatiing in the 2,4
4 GHz ISM band and ussing wide ba
and modulattion
; Harmonize
ed EN coverring essentia
al requirements under arrticle 3.2 of tthe R&TTE Directive
9-17, Electro
omagnetic Compatibility
y and Radio spectrum Matters
(ERM
M); Electromagnetic
ity (EMC) sta
andard for ra
adio equipm
ment and serrvices; Part 17:
1 Specific Conditions for
f Wideban
nd
HYPERLAN Equipment.
1, Safety of Information Technologyy Equipmentt.
Assessmen
nt of electron
nic and electtrical equipm
ment related to human exxposure res
strictions for
gnetic fields (0
( Hz-300 GHz).
Exposure to Radio Frequency
y Radiation
n.
e must not be
e co-located
d or operatin
ng in conjunc
ction with an
ny other anteenna or trans
smitter, without
Exposure evvaluation.
cal documen
ntation as re
equired by th
he Conformitty Assessme
ent procedu re is kept at the following
TSURUMA
AKI, TAMA-S
SHI, TOKYO
O, 206-8567 JAPAN.
MI ELECTR
RIC CO.,LTD
D.
NEERING DE
EPTMENT
ODULE BUS
SINESS DIVIISION
81-42-310-56
691
81-42-310-5582
COMME
ERCIAL IN CO
ONFIDENCE
his material maay not in whole or part be ccopied, stored electronically
y or communic
icated to third parties
without
MITS
SUMI ELECT
TRIC CO., LT
TD’s prior agreeement in wriiting.
Page 3 of 4
WML-C68_User_Manual
18. Jun. 2012
3. FCC Regulatory Information
Caution:
Any changes or modifications not expressly approved by the party responsible for product compliance could
void the user's authority to operate the equipment.
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must
be maintained between the antenna of this device and all persons. This device must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
Labelling
MITSUMI Bluetooth module WML-C68 is labeled as below.
FCC ID: POOWML-C68
If FCC ID is not visible when the module is installed into the system, “Contains FCC ID:
POOWML-C68” shall be placed on the outside of final host system.
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.
Page 4 of 4
WML-C68_User_Manual
18. Jun. 2012
4. Canada-Industry
Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of this device.
L ‘ utilization de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fonctionnement du dispositif.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be
maintained between the antenna of this device and all persons. This device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Labelling
MITSUMI Bluetooth module WML-C68 is labeled as below.
IC ID: 4250A-WMLC68
If IC ID is not visible when the module is installed into the system, “Contains IC ID:
4250A-WMLC68” shall be placed on the outside of final host system.
COMMERCIAL IN CONFIDENCE
This material may not in whole or part be copied, stored electronically or communicated to third parties
without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2012:06:25 13:15:05+09:00
Modify Date                     : 2012:06:25 13:15:05+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:d37d5acd-2d57-44aa-a4f9-82de7ffb78b6
Instance ID                     : uuid:a3872ac8-2020-4c3e-b53a-323ef375de74
Page Count                      : 4

EXIF Metadata provided by EXIF.tools