Mobile Technologies 165-00471 Power Distribution Unit User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4118715
Application ID	wD8uhKZuwcY9DquTbh9Qlw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	299.42kB (3742752 bits)
Date Submitted	2018-12-27 00:00:00
Date Available	2018-12-27 00:00:00
Creation Date	2018-12-27 10:52:55
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-12-27 11:01:59
Document Title	User Manual.PDF
Document Creator	Adobe InDesign CC 14.0 (Windows)
Document Author:	yuw

CONTENTS
SECURE PLUG™ (PATENT PENDING) USER GUIDE
Product Manual for
SECURE PLUG™
Contents
1.
Materials in Box
2.
Installation
3.
Key Whitelist
4.
Merchandising
5.
Arming & Disarming the System
6.
Remerchandising
7.
Adding New User Keys
8.
Deleting Whitelist
9.
LED Status Indicators
10.
FCC and ISED Statement
12
DO NOT REMOVE FROM STORE
For additional support, please reach out to our
Contact Center at 800-426-6844
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
MATERIALS IN BOX
SECURE PLUG™ (PATENT PENDING) USER GUIDE
Secure Plug Power Strip (Region-Specific)
Alarm Label Sheet
Remote Access Module (Optional)
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
INSTALLATION
SECURE PLUG™ (PATENT PENDING) USER GUIDE
WARNING: No user serviceable parts inside. Please contact MTI for service.
CAUTION: To Reduce the Risk of Electric Shock – Use Only Indoors.
CAUTION: Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.
CAUTION: Use Only in Dry Locations.
AVERTISSEMENT: Aucune pièce réparable par l’utilisateur à l’intérieur.
Veuillez contacter MTI pour le service.
ATTENTION: Pour réduire le risque de choc électrique - Utiliser uniquement à l’intérieur.
ATTENTION: Risque de choc électrique. Ne pas brancher sur une autre alimentation ou une rallonge.
ATTENTION: Utiliser uniquement dans des endroits secs.
1 FOR SCREW MOUNT (OPTIONAL): Use three #6 wood screws (not included). Measure and install screws into mounting
surface leaving 1/4” of the screw heads exposed. Align the Power Strip keyholes (circled in blue) and hang onto the screws.
1.6 in
(42 mm)
2.4 in
(62 mm)
7.9 in
(200 mm)
2 IF USING THE REMOTE ACCESS MODULE: Plug in to
3 Plug Power Strip into a wall outlet.
the end of the Power Strip and affix to surface, if desired.
The Remote Access Module allows you to use the RFID cards to
control the Secure Plug when access to the unit is difficult.
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
KEY WHITELIST
SECURE PLUG™ (PATENT PENDING) USER GUIDE
1 Place Authorization Card over the RFID icon to register to
2 Place the User Key over the RFID icon you want to add.
system. LED will be solid blue.
If successful Æ unit beeps 2 times
If unsuccessful Æ unit beeps 4 times (retry)
Repeat process for all User Keys until they are
successfully added.
The whitelist process can be done on the Secure
Plug unit or through the Remote Access Module.
3 To close the whitelist mode, place the Authorization Card
over the RFID icon. Whitelist mode will end automatically
after 3 minutes of no use. LED will be flashing white.
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
MERCHANDISING
SECURE PLUG™ (PATENT PENDING) USER GUIDE
1 Unplug any cables from the product end for products that have removable power cords. If the product does not have a
removable power cord, turn the power to the product to OFF.
NOTE: Only supports
products up to 10A.
2 Plug in product cables one at a time to the Power Strip.
If successful Æ 2 beeps and LED will be solid green,
this may take 20 to 60 seconds for products with larger
power adapters. The Remote Access Module will show a
corresponding white LED for that socket port.
www.mobiletechinc.com | T:800.426.6844
If unsuccessful Æ unit beeps 4 times and LED will be solid
red. The Remote Access Module will show a corresponding
red LED for that socket port. Unplug cable from the Power
Strip and try again making sure cables are unplugged from
the product.
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
MERCHANDISING
SECURE PLUG™ (PATENT PENDING) USER GUIDE
3 Repeat steps with next product to merchandise.
4 When all products have been successfully setup, plug cables back into product end at this time. Apply an “Alarm” label to
product end of cable, if desired.
5 Turn the power to products with a detachable power adapter to ON at this time. Keep power to other products OFF (ie.
hardwired products or products without power adapters).
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
ARMING/DISARMING THE SYSTEM
SECURE PLUG™ (PATENT PENDING) USER GUIDE
1 Place any User Key over the RFID icon and the LED
will change from flashing white to solid white to indicate
Armed.
3 If any cable becomes unplugged, the system will alarm.
LED will flash red/white. The Remote Access Module will
show a corresponding red LED for that socket port.
2 Turn the power to products to ON or OFF at this time, as
desired.
4 Placing a User Key over the RFID icon will silence the
alarm. The LED will remain flashing red/white.
5 To re-arm, fix the issue by plugging all cables back in. Place a User Key over the RFID icon and the LED will be solid white.
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
REMERCHANDISING
1a From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing white.
SECURE PLUG™ (PATENT PENDING) USER GUIDE
1b From an Alarming state, place the
User Key over the RFID icon to
silence the alarm. Then hold down
the User Key for 5 seconds to
return back to the disarmed state.
LED will be flashing white.
2 Merchandise a new product by
following the process on page 5.
If you did not unplug a product,
there is no need to remerchandise
the product again.
ADDING NEW USER KEYS
1 From an Armed state, place the User Key over the RFID
icon to disarm the system. LED will be flashing white.
2 Place Authorization Card over the RFID icon. Follow Key
Whitelist process starting on page 4.
DELETING WHITELIST (This will delete all User Keys from the system.)
1 From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing white.
www.mobiletechinc.com | T:800.426.6844
2 Hold down the Authorization Card
for 5 seconds, LED will be solid
yellow.
3 Place the Authorization Card over
the RFID icon AGAIN while LED is
yellow.
If successful Æ unit beeps 2 times
and the LED will turn solid green
If unsuccessful Æ unit beeps 4
times (retry)
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
LED STATUS INDICATORS
Visual Reference
SECURE PLUG™ (PATENT PENDING) USER GUIDE
System Status
LED is solid white.
LED is flashing white.
Condition
Armed
1. Disarmed
2. Merchandising Calibration
Solution
System is armed.
1. System is disarmed and needs to be rearmed.
2. System is calibrating product, wait until
successful or unsuccessful merchandising
before proceeding.
Alarm
System is alarming and needs to be
attended to.
LED is flashing red.
Mains Power Loss
Mains power loss has occurred. System
will alarm for 5 minutes. Whitelist
and merchandising information will be
maintained upon restoration of power.
LED is solid red.
Merchandising Unsuccessful
If merchandising fails, unplug the product.
Follow merchandising process again.
LED is flashing red and white.
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
LED STATUS INDICATORS
Visual Reference
System Status
SECURE PLUG™ (PATENT PENDING) USER GUIDE
Condition
Solution
LED is solid green.
Ready to Whitelist
System has an Authorization Card, but does
not have any User Keys added. Follow key
whitelist process.
LED is flashing green.
Factory Reset
System has no whitelist or Authorization
Card. Follow key whitelist process.
LED is solid blue.
1. Whitelist Mode (if using
Authorization Card)
LED is flashing blue.
LED is flashing yellow.
LED is solid yellow.
www.mobiletechinc.com | T:800.426.6844
1. System is in whitelist enrollment mode.
Follow whitelist process to add User Keys.
2. Overcurrent
2. System has gone into overcurrent
protection. Unplug any product which
may be drawing too much power.
Overcurrent/Disarmed
System has gone into overcurrent protection
and user has disarmed the system. Unplug
any product which may be drawing too
much power. The system will self-heal.
1. Ready to be Armed without
MTI Connect Mesh Connected
1. Add Secure Plug unit to Mesh network.
2. System is calibrating product, wait until
successful or unsuccessful merchandising
before proceeding.
2. Merchandising Calibration
without MTI Connect Mesh
Connected
1. Armed without MTI Connect
Mesh Connected
1. Add Secure Plug unit to
Mesh network.
2. Delete Whitelist Mode (If using
Authorization Card)
2. System is deleting whitelist. Wait until
complete.
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
10
LED STATUS INDICATORS
Visual Reference
SECURE PLUG™ (PATENT PENDING) USER GUIDE
System Status
Individual LED is solid white
(not main LED)
Individual LED is solid red
(not main LED)
Condition
Solution
Merchandising successful for
that socket port
See main LED for overall system status.
1. If merchandising fails, unplug the
product. Follow merchandising process
again.
1. Merchandising unsuccessful
for that socket port
2. System is alarming on corresponding
socket port and needs to be attended to.
2. Alarm
See main LED for overall system status
LED is flashing blue.
LED is flashing multiple colors.
www.mobiletechinc.com | T:800.426.6844
1.
System has entered Mesh network
provisioning mode. If it’s within range
of a Hub that is also in provisioning
mode, it will join the Hub’s network
within 5 seconds and it will stop
flashing blue.
2.
System has gone into overcurrent
protection and user has disarmed the
system. Unplug any product which
may be drawing too much power. The
system will self-heal.
1. Provisioning Mode
2. Overcurrent/Disarmed
System has received an
“identify” command from a user
of the MTI Connect software.
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
11
FCC AND ISED STATEMENT
SECURE PLUG™ (PATENT PENDING) USER GUIDE
FCC ID: 2AA2X-165-ØØ471
Model: 165-00471
FCC Statement
FCC ID: 2AA2X-165-ØØ645-24
Model: 165-00645 / 165-00670
FCC Statement
This device complies with Part 15 of the FCC Rules.
Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could
void the user’s authority to operate the equipment.
The RF Exposure Compliance distance is 20 millimeters.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISED Certifcation Number: 24439-165ØØ471
Model: 165-00471
ISED Statement
ISED Certifcation Number: 24439-165ØØ64524
Model: 165-00645 / 165-00670
ISED Statement
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage
est susceptible de compromettre le fomctionnement du dispositif.
CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf,
utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 millimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 millimètres entre le radiateur et votre corps.
Technical Data
Model: 165-00471
Operating Frequency:
Operating Temperature:
Max Power:
Technical Data
Model: 165-00645 / 165-00670
125KHz
0° C to 40° C
125KHz: <42dBuA/m at 10m
Operating Frequency:
Operating Temperature:
Max Power:
125KHz, 2.4GHz: 2405-2480MHz
0° C to 40° C
125KHz: <42dBuA/m at 10m
2.4GHz: <20dBm
MTI declares that the radio equipment models 165-00460, 165-00470 and 165-00471 Secure Plug Power distribution units including the
models 165-00645 and 165-00670 Remote Access Modules in compliance with EU Directive 2014/53/EU.
The full text of the EU Manufacturer’s Declaration of Conformity is available at the following internet address: www.mobiletechinc.com
Merchandising Technologies Inc.
Unit B, 9/F., Great Wall Factory Building 11 Cheung Shun Street,Lai Chi Kok,Kowloon, Hongkong
www.mobiletechinc.com | T:800.426.6844
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reserved
12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : yuw
Create Date                     : 2018:12:27 10:52:55+08:00
Modify Date                     : 2018:12:27 11:01:59+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2018:12:27 11:01:59+08:00
Creator Tool                    : Adobe InDesign CC 14.0 (Windows)
Instance ID                     : uuid:118cc56c-a767-4381-8410-03a26bcde356
Original Document ID            : xmp.did:fdc9506b-f677-6f42-a67a-6753ba0d2485
Document ID                     : xmp.id:14e55de7-89ed-0f43-874b-0252b334a978
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:6bcd7553-b896-fb40-8193-bb6d0f80b2a2
Derived From Document ID        : xmp.did:bbd06cdc-296e-b64d-b472-13b5cd988025
Derived From Original Document ID: xmp.did:fdc9506b-f677-6f42-a67a-6753ba0d2485
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 14.0 (Windows)
History Changed                 : /
History When                    : 2018:12:12 14:02:32-08:00
Format                          : application/pdf
Title                           : User Manual.PDF
Creator                         : yuw
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Trapped                         : False
Page Count                      : 12

EXIF Metadata provided by EXIF.tools