Mobvoi Information Technology WF72018 Ticpods User Manual

Shanghai Mobvoi Information Technology Company Limited Ticpods

User Manual

Sports music Bluetooth headset Ticpods User ManualPreface Precautions / Tips Thank you for choosing “Ticpods” sports music Bluetooth headset. Please read the introducon carefully before use to correctly operate the headset and to exert the superior performance of the product. Our Bluetooth headset has fashionable and gorgeous exterior and pure tone quality and integrated mulfuncon, which is portable. All the series own the exterior design patent. And it applies to the electro-acousc technology advanced in this industry systemacally, which is conducive for you to enjoy the extraordinary acouscs, listen to fabulous music and feel healthy and happy life when you are In home, outdoors trip and business at all me and places.Please use and store the product under normal temperature.Please do not expose the product in rain or wet environment.Please do not throw it avoid damage caused by falling.Please do not disassemble, repair and remake the product by yourself.Please do not clean the product with chemical solvents.Please charge with USB charger with a DC output voltage if necessary.Please do not abandon the product oponally or put it into high temperature environment or fire In case of danger.Dear user: PrecauonsCustomer service center：support@mobvoi.com Power on- Press and hold “MFB” buon unl the green light is blinkingPower off- In the power on mode, press and hold “MFB” buon for 5s then wait red light blinking for 2sAnswer call- Press accept call buon on phone or short press the “MFB” buon on the headset End call- Press End buon on phone or short press the “MFB” buon on the headsetDecline phone- Press decline buon on phone or press and hold the “V-” buon for 2sDial last number- In the standby mode, double press the “MFB” buon to re-dial the last numberMusic Play- Short press “MFB” buon to play/pause music.Track Control- In playing status, press and hold “V-” for 2s to play previous music, press and hold “V+” for 2s to play next musicVolume Control- Short press “ V+” or “V-” buon to adjust volume. Every press will increase/decrease volume by one levelMute- During the call, press and hold “V-” for 2s to disable MIC funcon and another 2s to enable MIC funcon.Feature Introduction Feature IntroductionBluetooth Pairing proceduresFor first pairing, please keep the phone and headsets within 1 meterPress and hold “MFB” buon unl the light is blinking (Red/Green) alternavely to show the headset powers onTurn on Bluetooth on phone to search for available devicesChoose “Ticpods WF72018” headset to pairEnter pairing code “0000”, if asked (some devices may not require a pairing code)If the pairing failed, please retry the pairing procedures aboveIf the green light is blinking, the pairing has been established. Press and hold the “MFB” buon for 2s (require device support)Comments: Funconality may vary by devicesComments: Please adjust the volume to a safe levelVoice funconFeature IntroductionVoice promptsWhen powering off, Ticpods reminds “Power off “ automacallyWhen powering on, Ticpods reminds “Power on“ automacallyWhen pairing successfully, Ticpods reminds “Your headset is connected” automacallyWhen disconnecng, Ticpods reminds “Your headset is disconnected” automacallyWhen the baery is low, Ticpods reminds“Baery Low” automacallyFeature IntroductionFollow the pairing procedures to pair the first phone, turn off the Bluetooth on phone, then pair with the second phone.Turn on the Bluetooth on the first phone and connect to the headsetDuring the call, short press “MFB” buon to end current call to answer the call on holdDouble press “MFB” buon to answer the second call and swap between two callsShort press “MFB” buon to end calls one by one.Comments: some funconality may be affected when two phones using the same headsetComments: please use the cerfied and suitable chargers. Using other types of chargers violates warranty and service policies and results in dangerous consequences. Baery Low Alert- when the baery voltage is below 3.3V, the headset will alert with red light blinking every 60sBaery low (Power off)- When the baery voltage is below 3.0V, the headset will be powered off automacally During the call, press and hold “V+” buon for 2s to switch audio from Bluetooth to phone. Then another 2s to switch from phone to Bluetooth.Charge Status- the red light will blink while charging and green light when the headset is fully-chargedConnect one Ticpods to two devices: In a medical facility, be sure to obey instrucons provided by staff. On an aircra, be sure to obey instrucons provided by flight personnel. Do not use this headsets in any area where its use is prohibited. Electromagnec waves and other signals emied by the headsets may affect instrumentaon, which may create the risk of accidentPeople fied with a cardiac pacemaker or any other implantable medical device should keep this headsets and charger cable away from their body. Radio waves and magnesm can affect the operaon of cardiac pacemakers and other medical devices. Should you or another person ever start to noce or feel any abnormality, immediately move the headsets and charger cable away and consult a physician.If the headsets or charger is smoking, eming foul odor, generang heat, or otherwise demonstrang abnormal symptoms, there is a risk of fire and electric shock, so immediately take the following acons:If a charging is in progress, unplug the charger/charging cable from the power outlet.Turn off the headsets’s power.Contact Mobvoi’s service center at support@mobvoi.com.Danger – Be sure to observe the points below when using this headsets. Failure to do so creates the risk of fire, explosion or electric shock, which can lead to death or serious personal injury.Do not put the headsets into fire or expose it to heat of 140° for greater.Do not try to take the headsets apart or modify it.Do not expose the headsets to strong impact or shock.Do not place the headsets inside places not designed to store everyday objects, such as microwave ovens, driers, and pressurized containersCharge the headsets only in accordance with the charging method described in the product manual.If radio wave interference or other problems are generated in other equipment when using the headsets, turn off the headsets. This headsets may affect operaonal or other problems with the other equipment, which creates the risk of accident.Safety PrecautionsFailure to properly use this headsets could result in serious injury or death. Please carefully read the following safety precauons.Safety Precautions1.3.2.When charging with the charging cable, be sure to observe the precauons below in order to avoid the risk of heat generaon, fire, explosion, and electric shock.Do not use the charging cable to charge any device other than a headsets.Do not place heavy objects on the charger cable.Always keep the charging cable connector clean. Wipe away any dust that collects on them.Use a dry cloth to clean the charging cable. Do not use detergent for cleaning.Do not touch the charging cable when your hands are wet.Make sure no liquid (water, sports drink liquid, seawater, animal urine, etc.) gets on the charging cable during use.Do not charge the headsets when it is wet.Never touch the headsets, or charger cable during an electrical storm.Should the headsets, charging cable become damaged, immediately stop using them and unplug the charger from the power outlet. Next, contact Mobvoi’s service center at support@mobvoi.com. Connued use of a damaged item creates the risk of fire and electric shock.Do not try to charge the headsets while wearing it. Doing so increases the damage when accident occurs.Safety Precautions1.4.5.6.7.8.3.2.9.10.1.2.3.1.3.2.Avoiding hearing damagePermanent hearing loss may occur if you use your headsets at a high volume. Set the volume to a safe level. Over me you can become accustomed to a higher volume that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less me is required before your hearing could be affected.Hearing experts suggest that to protect your hearing.Limit the amount of me you use the headsets at high volume.Avoid turning up the volume to block out noisy surroundings.Turn the volume down if you can’t hear people speaking near you.CauonUse of headsets to listen to music while operang a vehicle is not recommended and is illegal in some areas. Be careful and aenve while driving. Stop using this device if you find it disrupve or distracng while operang any type of vehicle or performing any other acvity that requires your full aenon.Should you ever noce any abnormality (including skin rash or irritaon), immediately stop using the headsets and consult a physician. Since the headsets come into direct contact with the skin, the condions below may cause such a rash or irritaon: Safety Precautions Safety PrecautionsWhen a wearer is allergic to metal or leather or liquid silicone rubber.When the headsets is rusty, dirty, sweaty, etc.When the wearer is in poor physical condion.To avoid unexpected injury or skin rash due to allergic reacon, do not wear the headsets while sleeping.When picking up or otherwise coming into contact with a child, remove your headsets to avoid possible injury to the child or skin rash due to allergic reacon.If the headsets does not charge within the normal charging me, stop charging. Connued charging creates the risk of heat generaon, fire, and explosion by the built-in baery.Precauons during useWater resistanceThe headsets is rated IP65 using the Ingress Protecon rang system. The headsets has been tested in a controlled environment and shown to be water and dust resistant in certain circumstances (meets requirements of classificaon IP65 as described by the internaonal standard IEC 60529 - Degrees of Protecon provided by Enclosures [IP Code].) Despite this classificaon, your device is not impervious to water damage in any situaon. It is important that all compartments are closed ghtly. Follow these ps carefully to prevent damage to the device.Do not drop the headsets or subject it to an impact.Do not submerge the headsets in water.Do not swim or bathe with the headsets.Do not expose the headsets to pressurized water or high velocity water, including, for example, using the headsets while showering, water skiing, wake boarding, surfing, or jet skiing.Prevent your headsets from contacng soap, detergent, acids or acidic foods, and any liquids other than fresh water, such as salt water, soapy water, pool water, perfume, insect repellent, loons, sunscreen, oil, adhesive remover, hair dye, or solvents.Whenever your device gets wet, immediately dry it thoroughly with a clean, so cloth.Do not expose the headsets to extreme temperature or temperature changes.Do not wear the headsets in a sauna or steam room.Not a medical device.Safety PrecautionsProduct name: Ticpods Sport Bluetooth HeadsetBluetooth version: V4.1Charging mode: Adapter (DC5V 200mAh minimum)Baery: High performance lithium polymer baeryBluetooth Class: Class 2Bluetooth profile: HSP/HFP/A2DP/AVRCPMusic me: About 6 hoursStandby me: About 160 hoursCalling me: About 6 hoursProduct Description
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu