Mobvoi Information Technology WF72018 Ticpods User Manual
Shanghai Mobvoi Information Technology Company Limited Ticpods
User Manual
Sports music Bluetooth headset
Ticpods User Manual
Preface Precautions / Tips
Thank you for choosing “Ticpods” sports music Bluetooth
headset. Please read the introducon carefully before use to
correctly operate the headset and to exert the superior
performance of the product. Our Bluetooth headset has
fashionable and gorgeous exterior and pure tone quality and
integrated mulfuncon, which is portable. All the series own
the exterior design patent. And it applies to the electro-acousc
technology advanced in this industry systemacally, which is
conducive for you to enjoy the extraordinary acouscs, listen to
fabulous music and feel healthy and happy life when you are In
home, outdoors trip and business at all me and places.
Please use and store the product under normal temperature.
Please do not expose the product in rain or wet environment.
Please do not throw it avoid damage caused by falling.
Please do not disassemble, repair and remake the product by
yourself.
Please do not clean the product with chemical solvents.
Please charge with USB charger with a DC output voltage if
necessary.
Please do not abandon the product oponally or put it into high
temperature environment or fire In case of danger.
Dear user: Precauons
Customer service center：support@mobvoi.com
Power on- Press and hold “MFB” buon unl the green light is
blinking
Power off- In the power on mode, press and hold “MFB”
buon for 5s then wait red light blinking for 2s
Answer call- Press accept call buon on phone or short press
the “MFB” buon on the headset
End call- Press End buon on phone or short press the “MFB”
buon on the headset
Decline phone- Press decline buon on phone or press and
hold the “V-” buon for 2s
Dial last number- In the standby mode, double press the
“MFB” buon to re-dial the last number
Music Play- Short press “MFB” buon to play/pause music.
Track Control- In playing status, press and hold “V-” for 2s to
play previous music, press and hold “V+” for 2s to play next
music
Volume Control- Short press “ V+” or “V-” buon to adjust
volume. Every press will increase/decrease volume by one
level
Mute- During the call, press and hold “V-” for 2s to disable
MIC funcon and another 2s to enable MIC funcon.
Feature Introduction Feature Introduction
Bluetooth Pairing procedures
For first pairing, please keep the phone and headsets
within 1 meter
Press and hold “MFB” buon unl the light is blinking
(Red/Green) alternavely to show the headset powers on
Turn on Bluetooth on phone to search for available
devices
Choose “Ticpods WF72018” headset to pair
Enter pairing code “0000”, if asked (some devices may not
require a pairing code)
If the pairing failed, please retry the pairing procedures
above
If the green light is blinking, the pairing has been
established.
Press and hold the “MFB” buon for 2s (require device
support)
Comments: Funconality may vary by devices
Comments: Please adjust the volume to a safe level
Voice funcon
Feature Introduction
Voice prompts
When powering off, Ticpods reminds “Power off “
automacally
When powering on, Ticpods reminds “Power on“
automacally
When pairing successfully, Ticpods reminds
“Your headset is connected” automacally
When disconnecng, Ticpods reminds
“Your headset is disconnected” automacally
When the baery is low, Ticpods reminds
“Baery Low” automacally
Feature Introduction
Follow the pairing procedures to pair the first phone, turn off
the Bluetooth on phone, then
pair with the second phone.
Turn on the Bluetooth on the first phone and connect to the
headset
During the call, short press “MFB” buon to end current call
to answer the call on hold
Double press “MFB” buon to answer the second call and
swap between two calls
Short press “MFB” buon to end calls one by one.
Comments: some funconality may be affected when two phones
using the same headset
Comments: please use the cerfied and suitable chargers. Using
other types of chargers violates warranty and service policies and
results in dangerous consequences.
Baery Low Alert- when the baery voltage is below 3.3V, the
headset will alert with red light blinking every 60s
Baery low (Power off)- When the baery voltage is below
3.0V, the headset will be powered off automacally
During the call, press and hold “V+” buon for 2s to switch
audio from Bluetooth to phone. Then another 2s to switch
from phone to Bluetooth.
Charge Status- the red light will blink while charging and green
light when the headset is fully-charged
Connect one Ticpods to two devices: In a medical facility, be sure to obey instrucons provided by
staff. On an aircra, be sure to obey instrucons provided by
flight personnel. Do not use this headsets in any area where
its use is prohibited. Electromagnec waves and other signals
emied by the headsets may affect instrumentaon, which
may create the risk of accident
People fied with a cardiac pacemaker or any other
implantable medical device should keep this headsets and
charger cable away from their body. Radio waves and
magnesm can affect the operaon of cardiac pacemakers
and other medical devices. Should you or another person ever
start to noce or feel any abnormality, immediately move the
headsets and charger cable away and consult a physician.
If the headsets or charger is smoking, eming foul odor,
generang heat, or otherwise demonstrang abnormal
symptoms, there is a risk of fire and electric shock, so
immediately take the following acons:
If a charging is in progress, unplug the charger/charging cable
from the power outlet.
Turn off the headsets’s power.
Contact Mobvoi’s service center at support@mobvoi.com.
Danger – Be sure to observe the points below when using
this headsets. Failure to do so creates the risk of fire,
explosion or electric shock, which can lead to death or
serious personal injury.
Do not put the headsets into fire or expose it to heat of 140°
for greater.
Do not try to take the headsets apart or modify it.
Do not expose the headsets to strong impact or shock.
Do not place the headsets inside places not designed to store
everyday objects, such as microwave ovens, driers, and
pressurized containers
Charge the headsets only in accordance with the charging
method described in the product manual.
If radio wave interference or other problems are generated in
other equipment when using the headsets, turn off the
headsets. This headsets may affect operaonal or other
problems with the other equipment, which creates the risk of
accident.
Safety Precautions
Failure to properly use this headsets could result in
serious injury or death. Please carefully read the
following safety precauons.
Safety Precautions
1.
3.
2.
When charging with the charging cable, be sure to observe
the precauons below in order to avoid the risk of heat
generaon, fire, explosion, and electric shock.
Do not use the charging cable to charge any device other than
a headsets.
Do not place heavy objects on the charger cable.
Always keep the charging cable connector clean. Wipe away
any dust that collects on them.
Use a dry cloth to clean the charging cable. Do not use
detergent for cleaning.
Do not touch the charging cable when your hands are wet.
Make sure no liquid (water, sports drink liquid, seawater,
animal urine, etc.) gets on the charging cable during use.
Do not charge the headsets when it is wet.
Never touch the headsets, or charger cable during an
electrical storm.
Should the headsets, charging cable become damaged,
immediately stop using them and unplug the charger from the
power outlet. Next, contact Mobvoi’s service center at
support@mobvoi.com. Connued use of a damaged item
creates the risk of fire and electric shock.
Do not try to charge the headsets while wearing it. Doing so
increases the damage when accident occurs.
Safety Precautions
1.
4.
5.
6.
7.
8.
3.
2.
9.
10.
1.
2.
3.
1.
3.
2.
Avoiding hearing damage
Permanent hearing loss may occur if you use your headsets at a
high volume. Set the volume to a safe level. Over me you can
become accustomed to a higher volume that may sound normal
but can be damaging to your hearing. If you experience ringing
in your ears or muffled speech, stop listening and have your
hearing checked. The louder the volume, the less me is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing.
Limit the amount of me you use the headsets at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near
you.
Cauon
Use of headsets to listen to music while operang a vehicle is
not recommended and is illegal in some areas. Be careful and
aenve while driving. Stop using this device if you find it
disrupve or distracng while operang any type of vehicle or
performing any other acvity that requires your full aenon.
Should you ever noce any abnormality (including skin rash or
irritaon), immediately stop using the headsets and consult a
physician. Since the headsets come into direct contact with the
skin, the condions below may cause such a rash or irritaon:
Safety Precautions Safety Precautions
When a wearer is allergic to metal or leather or liquid silicone
rubber.
When the headsets is rusty, dirty, sweaty, etc.
When the wearer is in poor physical condion.
To avoid unexpected injury or skin rash due to allergic reacon,
do not wear the headsets while sleeping.
When picking up or otherwise coming into contact with a child,
remove your headsets to avoid possible injury to the child or
skin rash due to allergic reacon.
If the headsets does not charge within the normal charging
me, stop charging. Connued charging creates the risk of heat
generaon, fire, and explosion by the built-in baery.
Precauons during use
Water resistance
The headsets is rated IP65 using the Ingress Protecon rang
system. The headsets has been tested in a controlled
environment and shown to be water and dust resistant in
certain circumstances (meets requirements of classificaon
IP65 as described by the internaonal standard IEC 60529 -
Degrees of Protecon provided by Enclosures [IP Code].)
Despite this classificaon, your device is not impervious to
water damage in any situaon. It is important that all
compartments are closed ghtly. Follow these ps carefully to
prevent damage to the device.
Do not drop the headsets or subject it to an impact.
Do not submerge the headsets in water.
Do not swim or bathe with the headsets.
Do not expose the headsets to pressurized water or high
velocity water, including, for example, using the headsets while
showering, water skiing, wake boarding, surfing, or jet skiing.
Prevent your headsets from contacng soap, detergent, acids or
acidic foods, and any liquids other than fresh water, such as salt
water, soapy water, pool water, perfume, insect repellent,
loons, sunscreen, oil, adhesive remover, hair dye, or solvents.
Whenever your device gets wet, immediately dry it thoroughly
with a clean, so cloth.
Do not expose the headsets to extreme temperature or
temperature changes.
Do not wear the headsets in a sauna or steam room.
Not a medical device.
Safety Precautions
Product name: Ticpods Sport Bluetooth Headset
Bluetooth version: V4.1
Charging mode: Adapter (DC5V 200mAh minimum)
Baery: High performance lithium polymer baery
Bluetooth Class: Class 2
Bluetooth profile: HSP/HFP/A2DP/AVRCP
Music me: About 6 hours
Standby me: About 160 hours
Calling me: About 6 hours
Product Description
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.