Mobvoi Information Technology WF72018 Ticpods User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3460719
Application ID	FHbZXMmS5twrKd1Wxk3F5g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	215.7kB (2696272 bits)
Date Submitted	2017-07-11 00:00:00
Date Available	2017-07-11 00:00:00
Creation Date	2017-06-06 15:33:02
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-06-21 17:21:18
Document Title	G18A(出门问问) 说明书 20170606
Document Creator	Adobe Illustrator CS6 (Windows)

Preface
Dear user:
Thank you for choosing “Ticpods” sports music Bluetooth
headset. Please read the introduction carefully before use to
correctly operate the headset and to exert the superior
performance of the product. Our Bluetooth headset has
fashionable and gorgeous exterior and pure tone quality and
integrated multifunction, which is portable. All the series own
the exterior design patent. And it applies to the electro-acoustic
technology advanced in this industry systematically, which is
conducive for you to enjoy the extraordinary acoustics, listen to
fabulous music and feel healthy and happy life when you are In
home, outdoors trip and business at all time and places.
Precautions / Tips
Precautions
Please use and store the product under normal temperature.
Please do not expose the product in rain or wet environment.
Please do not throw it avoid damage caused by falling.
Please do not disassemble, repair and remake the product by
yourself.
Please do not clean the product with chemical solvents.
Please charge with USB charger with a DC output voltage if
necessary.
Please do not abandon the product optionally or put it into high
temperature environment or fire In case of danger.
Product Description
Product name: Ticpods Sport Bluetooth Headset
Bluetooth version: V4.1
Charging mode: Adapter (DC5V 200mAh minimum)
Battery: High performance lithium polymer battery
Bluetooth Class: Class 2
Bluetooth profile: HSP/HFP/A2DP/AVRCP
Music time: About 6 hours
Standby time: About 160 hours
Calling time: About 6 hours
Ticpods User Manual
Sports music Bluetooth headset
Power on- Press and hold “MFB” button until the green light is
blinking
Power off- In the power on mode, press and hold “MFB”
button for 5s then wait red light blinking for 2s
Answer call- Press accept call button on phone or short press
the “MFB” button on the headset
End call- Press End button on phone or short press the “MFB”
button on the headset
Decline phone- Press decline button on phone or press and
hold the “V-” button for 2s
Dial last number- In the standby mode, double press the
“MFB” button to re-dial the last number
Music Play- Short press “MFB” button to play/pause music.
Track Control- In playing status, press and hold “V-” for 2s to
play previous music, press and hold “V+” for 2s to play next
music
Volume Control- Short press “ V+” or “V-” button to adjust
volume. Every press will increase/decrease volume by one
level
Mute- During the call, press and hold “V-” for 2s to disable
MIC function and another 2s to enable MIC function.
Voice prompts
When powering off, Ticpods reminds “Power off “
automatically
When powering on, Ticpods reminds “Power on“
automatically
When pairing successfully, Ticpods reminds
“Your headset is connected” automatically
When disconnecting, Ticpods reminds
“Your headset is disconnected” automatically
When the battery is low, Ticpods reminds
“Battery Low” automatically
Battery Low Alert- when the battery voltage is below 3.3V, the
headset will alert with red light blinking every 60s
Battery low (Power off)- When the battery voltage is below
3.0V, the headset will be powered off automatically
During the call, press and hold “V+” button for 2s to switch
audio from Bluetooth to phone. Then another 2s to switch
from phone to Bluetooth.
Charge Status- the red light will blink while charging and green
light when the headset is fully-charged
Customer service center：support@mobvoi.com
Feature Introduction
Feature Introduction
Feature Introduction
Bluetooth Pairing procedures
For first pairing, please keep the phone and headsets
within 1 meter
Press and hold “MFB” button until the light is blinking
(Red/Green) alternatively to show the headset powers on
Turn on Bluetooth on phone to search for available
devices
Choose “Ticpods WF72018” headset to pair
Enter pairing code “0000”, if asked (some devices may not
require a pairing code)
If the pairing failed, please retry the pairing procedures
above
If the green light is blinking, the pairing has been
established.
Voice function
Press and hold the “MFB” button for 2s (require device
support)
Comments: Functionality may vary by devices
Comments: Please adjust the volume to a safe level
Feature Introduction
Connect one Ticpods to two devices:
Follow the pairing procedures to pair the first phone, turn off
the Bluetooth on phone, then
pair with the second phone.
Turn on the Bluetooth on the first phone and connect to the
headset
During the call, short press “MFB” button to end current call
to answer the call on hold
Double press “MFB” button to answer the second call and
swap between two calls
Short press “MFB” button to end calls one by one.
Comments: some functionality may be affected when two phones
using the same headset
Comments: please use the certified and suitable chargers. Using
other types of chargers violates warranty and service policies and
results in dangerous consequences.
Safety Precautions
When charging with the charging cable, be sure to observe
the precautions below in order to avoid the risk of heat
generation, fire, explosion, and electric shock.
1. Do not use the charging cable to charge any device other than
a headsets.
2. Do not place heavy objects on the charger cable.
3. Always keep the charging cable connector clean. Wipe away
any dust that collects on them.
4. Use a dry cloth to clean the charging cable. Do not use
detergent for cleaning.
5. Do not touch the charging cable when your hands are wet.
6. Make sure no liquid (water, sports drink liquid, seawater,
animal urine, etc.) gets on the charging cable during use.
7. Do not charge the headsets when it is wet.
8. Never touch the headsets, or charger cable during an
electrical storm.
9. Should the headsets, charging cable become damaged,
immediately stop using them and unplug the charger from the
power outlet. Next, contact Mobvoi’s service center at
support@mobvoi.com. Continued use of a damaged item
creates the risk of fire and electric shock.
10. Do not try to charge the headsets while wearing it. Doing so
increases the damage when accident occurs.
Safety Precautions
Avoiding hearing damage
Permanent hearing loss may occur if you use your headsets at a
high volume. Set the volume to a safe level. Over time you can
become accustomed to a higher volume that may sound normal
but can be damaging to your hearing. If you experience ringing
in your ears or muffled speech, stop listening and have your
hearing checked. The louder the volume, the less time is
required before your hearing could be affected.
Hearing experts suggest that to protect your hearing.
1. Limit the amount of time you use the headsets at high volume.
2. Avoid turning up the volume to block out noisy surroundings.
3. Turn the volume down if you can’t hear people speaking near
you.
Caution
Use of headsets to listen to music while operating a vehicle is
not recommended and is illegal in some areas. Be careful and
attentive while driving. Stop using this device if you find it
disruptive or distracting while operating any type of vehicle or
performing any other activity that requires your full attention.
Should you ever notice any abnormality (including skin rash or
irritation), immediately stop using the headsets and consult a
physician. Since the headsets come into direct contact with the
skin, the conditions below may cause such a rash or irritation:
Safety Precautions
Failure to properly use this headsets could result in
serious injury or death. Please carefully read the
following safety precautions.
Danger – Be sure to observe the points below when using
this headsets. Failure to do so creates the risk of fire,
explosion or electric shock, which can lead to death or
serious personal injury.
Do not put the headsets into fire or expose it to heat of 140°
for greater.
Do not try to take the headsets apart or modify it.
Do not expose the headsets to strong impact or shock.
Do not place the headsets inside places not designed to store
everyday objects, such as microwave ovens, driers, and
pressurized containers
Charge the headsets only in accordance with the charging
method described in the product manual.
If radio wave interference or other problems are generated in
other equipment when using the headsets, turn off the
headsets. This headsets may affect operational or other
problems with the other equipment, which creates the risk of
accident.
Safety Precautions
1. When a wearer is allergic to metal or leather or liquid silicone
rubber.
2. When the headsets is rusty, dirty, sweaty, etc.
3. When the wearer is in poor physical condition.
To avoid unexpected injury or skin rash due to allergic reaction,
do not wear the headsets while sleeping.
When picking up or otherwise coming into contact with a child,
remove your headsets to avoid possible injury to the child or
skin rash due to allergic reaction.
If the headsets does not charge within the normal charging
time, stop charging. Continued charging creates the risk of heat
generation, fire, and explosion by the built-in battery.
Precautions during use
Water resistance
The headsets is rated IP65 using the Ingress Protection rating
system. The headsets has been tested in a controlled
environment and shown to be water and dust resistant in
certain circumstances (meets requirements of classification
IP65 as described by the international standard IEC 60529 Degrees of Protection provided by Enclosures [IP Code].)
Despite this classification, your device is not impervious to
water damage in any situation. It is important that all
compartments are closed tightly. Follow these tips carefully to
prevent damage to the device.
Safety Precautions
In a medical facility, be sure to obey instructions provided by
staff. On an aircraft, be sure to obey instructions provided by
flight personnel. Do not use this headsets in any area where
its use is prohibited. Electromagnetic waves and other signals
emitted by the headsets may affect instrumentation, which
may create the risk of accident
People fitted with a cardiac pacemaker or any other
implantable medical device should keep this headsets and
charger cable away from their body. Radio waves and
magnetism can affect the operation of cardiac pacemakers
and other medical devices. Should you or another person ever
start to notice or feel any abnormality, immediately move the
headsets and charger cable away and consult a physician.
If the headsets or charger is smoking, emitting foul odor,
generating heat, or otherwise demonstrating abnormal
symptoms, there is a risk of fire and electric shock, so
immediately take the following actions:
1. If a charging is in progress, unplug the charger/charging cable
from the power outlet.
2. Turn off the headsets’s power.
3. Contact Mobvoi’s service center at support@mobvoi.com.
Safety Precautions
Do not drop the headsets or subject it to an impact.
Do not submerge the headsets in water.
Do not swim or bathe with the headsets.
Do not expose the headsets to pressurized water or high
velocity water, including, for example, using the headsets while
showering, water skiing, wake boarding, surfing, or jet skiing.
Prevent your headsets from contacting soap, detergent, acids or
acidic foods, and any liquids other than fresh water, such as salt
water, soapy water, pool water, perfume, insect repellent,
lotions, sunscreen, oil, adhesive remover, hair dye, or solvents.
Whenever your device gets wet, immediately dry it thoroughly
with a clean, soft cloth.
Do not expose the headsets to extreme temperature or
temperature changes.
Do not wear the headsets in a sauna or steam room.
Not a medical device.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : G18A(出门问问) 说明书 20170606
Metadata Date                   : 2017:06:21 17:21:18+08:00
Modify Date                     : 2017:06:21 17:21:18+08:00
Create Date                     : 2017:06:06 15:33:02+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 72
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6653 bytes, use -b option to extract)
Instance ID                     : uuid:a3767c01-4ce2-435b-8139-8d7f2f19c0aa
Document ID                     : xmp.did:863E910D544AE711A2FFA401E9DDAE0B
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:df703cf8-3a50-4c07-9167-afed9d1a2164
Derived From Document ID        : xmp.did:11906A887025E711A575F97DC449DF29
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:37BC3D468DF6E311B14C9B7DA6D17BEC, xmp.iid:863E910D544AE711A2FFA401E9DDAE0B
History When                    : 2014:06:18 14:22:26+08:00, 2017:06:06 15:32:59+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 571.852778
Max Page Size H                 : 264.428476
Max Page Size Unit              : Millimeters
Font Name                       : Calibri, Calibri-Bold, AdobeSongStd-Light, MicrosoftYaHei
Font Family                     : Calibri, Calibri, Adobe 宋体 Std, 微软雅黑
Font Face                       : Regular, Bold, L, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 1.02, Version 1.02, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.02
Font Composite                  : False, False, False, False
Font File Name                  : CALIBRI_0.TTF, CALIBRIB_0.TTF, AdobeSongStd-Light.otf, msyh.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: PANTONE 429 C
Swatch Groups Colorants Type    : SPOT
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : LAB
Swatch Groups Colorants L       : 69.019608
Swatch Groups Colorants A       : -2
Swatch Groups Colorants B       : -3
Producer                        : Adobe PDF library 10.01
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : Administrator,
Bounding Box                    : -1266 -158 3148 1051
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools