Modular Mining Systems 301582 Spread Spectrum Transceiver User Manual Radio SW Operation Instructions
Modular Mining Systems Inc Spread Spectrum Transceiver Radio SW Operation Instructions
Contents
- 1. Operation Instructions
- 2. Users Manual
- 3. CORRECTED Revised Manual infor for Antenna Info
- 4. MPE Statement for manual
Operation Instructions
Radio SW Operation Instructions POWERING UP THE COMPUTER & BEGINNING TEST 1. Power switch on Using switch on the side of the computer (upper right) Computer boots up into Windows 2. CNTL-ALT-DEL to begin windows Login 3. Username: Modular Password: modular Login to Windows (lower case) 4. Linux Double click on Linux icon on the desktop This brings up the Linux Operating system under VMware 5. "Power On button" – one click In VMware click once on "Power On" button in the upper left. vmware will boot up (this will take a while) 6. CNTRL-ALT-ESC and then press left mouse button This changes cursor from Windows back into Linux window. Cursor should now be a square (not an arrow) 7. colunga-1 login: mms password: modular type "mms" for login to vmware type "modular" for password to wmware should get the: colungavm-1:mms$ Prompt 8. pswd –r BOOTDIR=/taz/boot Must change the boot directory 9. (Power up radio and Hub) UUT must be powered up before the next command. 10. pswtip Load the Hub interface driver should get the: arm Boot (roadrunner), V2.6.003-r > 11. net/scripts/test-radioa-new prompt Intializes the test program (for radio A) or for radio port B use net/scripts/test-radiob-new (repeater is always radio A). wait for 20 seconds while script runs. when finished execute the "pa dump" or the "pb dump" command to verify registers and verify communcations with radio are okay. VALID TEST PROGRAM SETTINGS: Note: "pa" is if using radio A port. If using radio B port use "pb". Note: The following prompt will be present before each command: arm Boot (roadrunner), V2.6.003-r > pa Lists the program settings. Intially all defaults will appear pa dump Dump registers out of the BBP Verify 1st 3 are: D2 00 07 pa setdac:xx where xx is 0 to 255. This is the DAC setting that controls the output power level. pa cnt:xx where xx is 1 to ??. This is the number of packets to TX The default is 1000 packets. (3 seconds of transmitting) Note: 5000 packets of length 250 (default length) results in about 15 seconds of transmitting. pa size:xx where xx is the number of bytes per packet (default is 250) Valid range is from 1 to 1000 pa chan:xx pa set where xx is from 1 to 10. This is the 802.11b DSSS channel of operation. Defualt value is channel = 5 Must invoke this in order to make the channel change valid pa dly:xx Delay in mSec between packets sent out pa randdata:1 pa randdata:0 Enable random data function for TX Disable random data function for TX (then 0x55 is always sent) EXITING AND SHUTTING DOWN THE COMPUTER 1. Exit type "exit" to get to colungavm-1: mms$ prompt 2. su password: roadph@se2 type "su" to login as super user enter password of roadph@se2 Should get the [root@colungavm-1 mms] # Prompt 3. /sbin/shutdown –h now shutdown linux & vmware 4. "X" to close vmware window click on "X" in upmost right of window to close vmware 5. Start – Shutdown Exit Windows (if desired) 6. Power Down Switch on right side of computer (upper right)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Producer : Acrobat Distiller 4.0 for Windows Creator : Microsoft Word 9.0 Modify Date : 2001:03:10 13:57:13-07:00 Author : johnsonr Title : Radio SW Operation Instructions Create Date : 2001:03:10 13:56:39 Page Count : 2 Page Mode : UseNoneEXIF Metadata provided by EXIF.tools