Molex CVS Dabendorf 130-02 Bluetooth handsfree car-kit User Manual UserMan Flash
Novero Dabendorf GmbH Bluetooth handsfree car-kit UserMan Flash
Contents
- 1. UserMan Flash
- 2. UserMan
UserMan Flash
129 8001 1.00 US English Operating Manual Funkwerk Dabendorf reserves the right to modifi cations in the course of technological progress and deviations from the delivery scope! All rights reserved! Reproduction, in whole or in part, is only permitted with the prior written consent of Funkwerk Dabendorf GmbH! EGO FLASH 1 List of contents LIST OF CONTENTS LIST OF ILLUSTRATIONS INTRODUCTION / FOREWORD SAFETY NOTES SCOPE OF DELIVERY/PACKAGE CONTENTS INSTALLATION INSTRUCTIONS 10 6.1 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 Required configuration Vehicle Mobile phone Muting (radio mute switch) Convertingting the EGO FLASH into an already-installed Funkwerk hands-free car kit Add-on speakers / Car audio telephone connection Car audio line-in 10 10 10 10 10 11 11 6.2 6.2.1 6.2.2 6.2.3 6.2.4 Installation locations Checking cable lengths Selection of site for installing the electronics box Selection of site for installing the microphone Selection of site for installing the control unit with integrated display 11 11 11 12 13 6.3 6.3.1 6.3.2 6.3.3 Installation Mounting the electronics box Mounting the microphone Mounting the control unit with integrated display 13 13 14 14 6.4 Connection scheme 15 6.5 6.5.1 Installation of the ISO connecting cable Checking the mute inputs 17 17 |3 EGO FLASH 6.5.2 6.5.3 Checking the installation Additional external speakers 19 19 6.6 Connecting the components to the electronics box 20 OPERATING INSTRUCTIONS 22 7.1 7.1.1 Features Overview of features 22 22 7.2 7.2.1 7.2.2 7.2.3 7.2.4 Symbols Key functions Symbols in the status bar Speller symbols Symbols for menu options 23 23 24 24 25 7.3 Speller 25 7.4 7.4.1 7.4.2 7.4.3 7.4.4 7.4.5 Getting started About Bluetooth® technology On / Off function Enter Bluetooth® PIN Hands-free mode Automatic coupling 26 26 27 27 27 28 7.5 7.5.1 7.5.2 7.5.3 7.5.4 7.5.5 7.5.6 7.5.7 7.5.8 7.5.9 7.5.10 The menus User management Call Contacts list Call lists Voicemail SMS Music player Dictation function Settings Voice control 28 31 32 36 37 37 38 38 39 40 43 8 10 11 12 13 14 SOFTWARE UPDATE SERVICE SPARE PARTS AND ACCESSORIES TECHNICAL DATA CERTIFICATION CONFORMITY STATEMENT HOTLINE 49 50 52 54 54 55 57 |5 2 List of illustrations EGO FLASH Fig. 01 Scope of delivery Fig. 02 Signal orientation of Bluetooth antenna 11 Fig. 03 Installation location for electronics box 12 Fig. 04 Installation location for microphone 12 Fig. 05 Installation dimensions of electronics box 13 Fig. 06 Connecting the Mini-ISO-connector 16 Fig. 07 Installation procedure 17 Fig. 08 Type-dependent pin allocation 18 Fig. 09 Plug wiring scheme 18 Fig. 10 Connection system 18 Fig. 11 a/b Changing power supply wiring 19 Fig. 12 Connecting external loudspeakers 20 Fig. 13 Connecting the electronics box 21 Fig. 14 Status bar 24 ® 3 Introduction / foreword Congratulations on your new EGO! Whether you’re browsing through your contacts list, reading SMS messages or selecting music for playback – EGO FLASH is a practical all-rounder with a razor-sharp OLED display and intuitive controls. Its handy size and sleek design make it a must-have accessory for your car. The installation of your EGO FLASH in your car requires specialized knowledge and skills. We therefore recommend that the installation be performed by a qualified professional. Before installation in your car, please make sure that your mobile phone is fully compatible with EGO FLASH. If you are uncertain, please consult your dealer or a qualified workshop. Our service team will also be happy to help you with any information you may require. Further information on compatibility between EGO FLASH and various mobile phones can be found on our website. |7 4 Safety notes 1. Incorrect installation – Incorrect installation may lead to damage to the units and/or your car! Specialized knowledge and skills are required for installing the system. We strongly recommend that the system be installed by a qualified professional. 2. Risk of injury – Unsuitable installation locations may become a source of injury in an accident situation, or may inhibit the correct functioning of essential safety equipment. Please carefully read the notes in the „Installation“ chapter carefully! 3. Risk of injury/material damage – the removal of vehicle lining with sharp or pointed objects may lead to injuries or material damage. 4. Road safety risk – Diverted attention can lead to dangerous situations in traffic. Even when using hands-free phone systems, your complete attention must be paid to the current traffic conditions. It is always advisable to avoid phone calls while driving in difficult traffic situations! 5. Damage to airbags – An incorrect installation location may cause damage to, or inhibit the correct function of, your airbags. Do not install the components within the deployment area of the airbags! 6. Insulation damage – Damaged insulation can lead to equipment and wiring damage. The cables and leads may not be under tension when installed. Install the cables and leads in such a way as to avoid pinching or abrasion. 7. Polarity and shorting damage – Cables connected with reversed polarity, or in such a way as to produce a short circuit, can lead to serious damage to your equipment. Before commencing installation, make sure that the car battery is disconnected. 8. Damage to essential vehicle components – Essential vehicle components or wiring can be damaged when drilling mounting holes or screwing in self-threading screws. Please make sure there is always sufficient space behind the screw holes and drilled holes! 9. Interference with on-board electronics – Despite the extreme protection against interference, incorrect installation can lead to interference with the vehicle electronic systems. Please read the vehicle manufacturer’s notes to this effect! 10. Appropriate use – The EGO FLASH is intended exclusively for use in vehicles with Bluetooth® mobile phones and A2DP devices. 11. Damage caused by inappropriate replacement parts – Inappropriate spare or replacement parts may lead to malfunctions. Please use only the approved parts listed in the section „Spares parts and accessories“! 12. Road safety risk – For your own safety, never initiate the coupling procedure while your vehicle is in motion! EGO FLASH 5 Scope of delivery / package content [1] Electronics box [2] Control unit with integrated OLED display [3] Microphone [4] ISO-cable for connection to the car electrical system [5] Self-adhesive pad [6] Quick Guide [7] Safety manual [4] [1] FWD [2] QUICK GUIDE Phone book [3] [5] Safety Instructions 1. EGO FLASH 2. [6] 129 8011 1.02 Improper installation – Improper installation may cause damages to the unit abilities. We therefore strongly or to the v recommend to have the installat ion one by a professional. Persona l injury – Inappro priate places for the installat ion may cause persona l injuries “Installation”! in 3. Persona l injury / Materia l damage – When you remove coverings or armature parts, Don’t submit the connect sha ing cables to pressure. 4. Negative efects on road safety – Talking whil t d i [7] Fig. 01: Scope of Delivery PLEASE MAKE SURE THE CONTENT OF THE PACKAGE is complete. If any parts are missing, please don‘t hesitate to contact our service hotline team: +49 (0) 3377 - 316 233, Mon.–Thurs 7.00 a.m.–5.00 p.m., Fri. 7.00 a.m.–4.00 p.m. |9 6 Installation guide 6.1 Determination of required configuration Before installation of your EGO FLASH, please note which features and connection options are provided by your car audio system. It is advantageous when your audio has the following: a muting function, phone input and line-in. You can find out which of these input options your audio system has in the documentation provided. 6.1.1 Vehicle The EGO FLASH may only be installed in vehicles with 12 V, with the negative terminal connected to the chassis. If no car audio is installed, an add-on speaker will be required. For the installation of the optional charging cradle, you will require a model-specific mounting that may be purchased from a specialist dealer 6.1.2 Mobile Telephone Operation of the EGO FLASH requires a Bluetooth®-compatible mobile phone. You can find a list of supported Bluetooth® telephones online at www.fwd-online.de. 6.1.3 Muting (radio muting) The muting function (Radio Muting) ensures that the audio sound is turned off during telephone calls. The system supports the muting function. Your car`s audio documentation will show whether your car audio has a mute option. If your car audio is not equipped with a muting option, you can install the optionally available Stereo Mute Box to facilitate speaker muting. 6.1.4 Converting the EGO FLASH into an already-installed Funkwerk hands-free car kit An adapter cable is available for customers who already own a Funkwerk hands-free car kit (including the Audio 2000, 3000, Audio blue, Audio com, and Audio compact) and who would like to easily convert the EGO FLASH. The adapter cable connects the EGO FLASH with the ISO cable already installed in your car with your Funkwerk hands-free car kit. EGO FLASH NOTE! This simple converting option is only possible when installing the EGO FLASH without a stereo mute box. To install the EGO FLASH with the stereo mute box, the stereo mute box’s ISO connecting cable should be used to connect to the vehicle. 6.1.5 Add-on speakers / Car audio telephone connection The car’s loudspeakers are transferred to the system is by means of switch contacts. These are designed for a peak power handling of 35 W (Sinus). Loudspeaker power handling exceeding 35 W leads to premature wear on the switching contacts. For higher outputs, use the telephone connection of the car audio or a 5 W / 4-Ohm satellite speaker. This port is only designed for voice reproduction. 6.1.6 Car audio line-in input A car audio with a line-in input option is required for music reproduction in stereo. As an alternative to line-in, the car audio may have a mini-ISO port (block connector C), a 0.14 in jack socket or a RCA input socket. An appropriate adapter lead is required for the connection between the EGO FLASH line-out and the line-in version of your audio system. If your car audio system has no line-in option, you can employ the optionally available Stereo Mute Box for stereo reproduction in combination with your car’s front speakers. 6.2 Installation locations RISK OF INJURY! Unsuitable installation locations may become a source of injury in an accident (or emergency braking) situation, or may inhibit the correct functioning of essential safety equipment. 6.2.1 Checking cable lengths Before you’ve securely installed the components, check that the installation locations have been selected in such a way that the cable length is sufficient to connect the individual components. 6.2.2 Selection of the installation location for the electronics box The Bluetooth® antenna for the connection to the mobile phone is installed in the electronics box. The antenna Fig. 02: Signal transmission of the Bluetooth® antenna 10 | 11 transmits directionally towards the front. For this reason, during installation, ensure that the antenna faces into the passenger cell (see Fig. 02). Vertical mounting is ideal. Metallic screening between the front panel and the passenger cell, such as metal or metallised plastic panels, are unsuitable and may interfere with the Bluetooth® connection. Locations behind the dashboard or in a metal-lined glove compartment are also unsuitable. A covering in plastic, fabric or wood presents no problems whatsoever. Fig. 03: Installation locations for the electronics box Suitable locations for the electronics box: Passenger side, next to the middle console under the paneling, model-specific installation console (dealer). Our suggested installation locations are shown in the illustration on the right. Further unsuitable locations are: Leg and knee height, potential head impact zone, airbag infl ation space, engine compartment 6.2.3 Selection of the point of installation for the microphone Suitable for the microphone: Where voice can reach the microphone unhindered (distance between the speaker and the microphone should be approx. 13.78 in), on the A-column (between windshield and driver’s side window), next to the driver‘s sun visor, on the dashboard Unsuitable for the microphone: Close to the speakers (less than 31 in), under the dashboard, in the air stream from open windows or air vents. EGO FLASH Fig. 04: Installation location for microphone The illustration shows one of the potential microphone mounting locations. Alternatively, the microphone may be attached to the sun visor with the clip provided. 6.2.4 Selection of site for installing the control unit with integrated display Suitable for the control console: In the space above the DIN installation shaft, close to the steering wheel (in an easily accessible and visible position) Unsuitable for the control console: Airbag infl ation space, potential head impact zones, out of reach of driver’s reach 6.3 Installation DAMAGE TO ESSENTIAL VEHICLE COMPONENTS! – Essential vehicle components or wiring can be damaged when drilling mounting holes or screwing in self-threading screws. Please make sure there is always sufficient space behind the screw holes and drilled holes! 6.3.1 Mounting the electronics box Installation consoles for a number of car models are available from your dealer. These are designed to contain all the system components, including the electronics box. When it is not possible to use an installation console, please proceed as follows: Define the mounting points Making sure that there is at least 2.8 in space for the plug and socket connectors. Mark the positions for the fixing screws. Fig. 05: Electronics box dimensions 12 | 13 Mounting the electronics box For mounting the electronics box, use four self-threading screws and appropriate washers. We recommend size “ST 2,9x25 DIN 7981”self-threading screws. These are ideal for the fixing of the electronics box. Pre-drill the holes with a 0.08 in drill. 6.3.2 Mounting the microphone Define the mounting location The microphone holder has a self-adhesive strip on the back. The mounting location should have the same form and area as the self-adhesive strip on the microphone holder. The location selected must allow the microphone cable to reach the electronics box! Position the microphone with the head facing towards the direction of speech. Cleaning and degreasing the mounting location The mounting location must be clean and free from grease and dirt/dust. Prior to installation, clean the area with a cleansing product containing ethyl alcohol. Only use products that do not damage plastics or varnished wood fi nishes and are themselves free of oils or grease. Unsuitable cleansers are, for example, lighter fluid, acetone, turpentine, trichloroethylene and similar products. Attaching the microphone holder Peel off the protective backing from the self-adhesive strip. Hold the microphone holder at a distance of several millimetres (about a quarter of an inch) above the desired mounting location. Re-check the positioning. Re-positioning after mounting is no longer possible. Place the microphone holder on the mounting location and fi x by applying short and light pressure. Attaching the microphone Attach the microphone by sliding it into the holder and position the microphone head towards the direction of speech. 6.3.3 Mounting the control unit with integrated display Define the mounting location The control console is mounted on a smooth service by means of the self-adhesive pad provided. Make sure that the location is within easy reach of the intended user. EGO FLASH Cleaning and degreasing the mounting location The mounting location must be clean and free from grease and dirt/dust. Prior to installation, clean the area with a cleansing product containing ethyl alcohol. Only use cleansing products that do not damage plastics or varnished wood finishes and are themselves free of oils or grease. Unsuitable cleansers are, for example, lighter fluid, acetone, turpentine, trichloroethylene and similar products. Attaching the control unit with integrated display After defining the appropriate cable direction on the back of the console, fix it by covering it with the self-adhesive pad. Hold the control console at a distance of several millimetres (about a quarter of an inch) above the desired mounting location. Re-check the positioning. Re-positioning the console after mounting is no longer possible. Apply the control console to the proposed mounting location and fix by applying short and light pressure. 6.4 Connection scheme Installation for call reception for a car audio system with a mute input but without a phone input With this connection option, voice playback is is emitted from the front right car speaker. During calls, the mute input blocks the car audio signal. NOTE: Please observe the information in section “6.5.1 Checking the mute inputs” on connecting the mute lead of the ISO connecting cable. Installation for voice playback with a car audio system with phone and mute input options With this connection option, voice playback comes through the car audio system speakers. During calls, the car radio output is switched to the phone input by the mute input In order to access the phone input of your car audio system, the speaker output of your EGO FLASH must be connected to the phone input of your car audio system. The purple and green leads of the ISO cable must be connected to the car audio phone input for this option. The purple and green leads must be disconnected from the ISO connector. The green lead (pin 14 of the 14-pin plug) should be connected to „Phone Out“, and the purple lead (pin 7 of the 14-pin plug) to „Phone In +“ of the Mini-ISO socket. 14 | 15 For information on the phone connection options of your car audio system, please consult the manufacturer‘s user manual. NOTE: If your car audio system has different phone connection options from those mentioned here, please consult a qualified professional for installation of the system. Furthermore, please read the section with information on connecting the mute lead of the ISO connection cable, “6.5.1 Checking the mute input”. Fig. 06: Connection for the mini ISO connection cable EGO FLASH 6.5 Installation of the ISO connecting cable The battery must be disconnected before starting cable installation. Disconnect the grounding cable from the negative pole of the battery. The cable installation procedure is shown in the illustrations. Fig. 07: Installation procedure Connect 14-pin ISO connecting cable to EGO FLASH Connect EGO FLASH ISO connector to car radio Car audio Car audio Electronics box Disconnect car wiring harness from car radio Connect yellow mute lead to one of the three mute inputs (see table) Connect EGO FLASH ISO connectors to car wiring harness ISO connectors When the installation is completed, reconnect the grounding cable to the negative pole of the battery. 6.5.1 Checking the mute inputs Picture 5 of Fig. 07 shows mute inputs 1–3. The yellow mute lead of the hands-free system should be connected to one of these inputs. Which mute input should be selected is shown in the tables: 16 | 17 Radio model Ford, Mercedes, Porsche, Becker Radio model Blaupunkt Radio model Philips EGO FLASH Pin Pin Pin Socket contact housing Wire colour Function Wiring of power supply connectors Mute blue Ignition (15) red Permanent positive (30) brown Ground (31) Socket wiring from the rear (see table) Socket contact housing Wire colour Function Mute red Permanent positive (30) blue Ignition (15) brown Ground (31) Plug wiring from the rear Fig. 09: Plug wiring scheme Socket contact housing Wire colour Function Mute red Permanent positive (30) blue Ignition (15) brown Ground (31) Socket contact housing Wire colour Function Mute red Permanent positive (30) blue Ignition (15) brown Ground (31) Vehicle wiring harness KFZ-Kabelbaum Audi, Volkswagen, Grundig Pin Car audio Autoradio Radio model Electronics box Elektronikbox Fig. 08: Typedependent pin allocation Fig. 10: Connection system 6.5.2 Checking the installation When the ISO connection cable is correctly installed, a call remains active until the call is ended, even if the ignition has already been turned off beforehand. The system switches off automatically when the call has been ended. If the system switches to off immediately switches off,then exchange the ignition lead (blue) with the power supply lead (red) as shown in Fig. 11b Fig. 11a: View of original connection Fig. 11b: View after changing cables PLEASE NOTE: the fuses should remain in place when opening the fuse compartment, make sure that they are not inadvertently exchanged! 6.5.3 Additional external speakers In the following cases, additional speakers (4 Ω, min. 5 W) must be used: → when the car audio system speakers should not be used → when the output rating of the speaker channel is greater than 35 W (Sinus) and the car audio system has no phone connection option → when the car audio system is used with active speakers and has no phone connection option Feedback interferes with the clarity of calls. Mount additional speakers at a distance of at least 31 in from the microphone. When mounting additional speakers, please observe the manufacturer‘s installation instructions. Speakers can be connected to the green (pin 14) and the purple (pin 7) leads of the connection cable. First of all, the purple and green leads must be disconnected from the ISO connector (see Fig. 12). 18 | 19 Pin Colour Brown Yellow Function Ground (31) Radio mute White Car audio speaker output + (front right) Purple Speaker lead + (front right) 10 11 12 Red Blue Permanent positive (30) Ignition (15) 13 Black Car audio speaker output (front right) 14 Green Speaker lead (front right) 6.6 View of the plug side, from which the wiring is fed in the plug housing (with pin allocation) Connection option for additional speakers on pin 7 (purple lead) and pin 14 (green lead) of the 14-pin plug Connecting the components to the electronics box The individual components are connected to the electronics box as follows: [1] [2] EGO FLASH Plug the microphone jack into the jack socket with the microphone symbol The electronic box line-in can be used to connect an optional MP3 player with line-out. To do so, a connection cable 0.14 in stereo jack plug to 0.14 in stereo jack plug (l = 4.92 ft) is required. IMPORTANT: Only connect the device (MP3 player, iPod™, etc.) to the electronics box line-in with a jack cable when it is being powered by battery alone (without the recharger), as interfering impulses may otherwise cause damage to the electronic box line-in. Fig. 12: Additional external loudspeakers [3] [4] [5] [6] The electronics box line-out must be connected to the car audio line-in. Depending on the car audio line-in configuration, one of the following cables is required: → Connection cable 0.14 in stereo jack to 0.14 in stereo jack (l = 4.92 ft) → Connection cable 0.14 in stereo jack to RCA plug (l = 4.92 ft) → Connection cable 0.14 in stereo jack to Mini-ISO (l = 4.92 ft) The control unit with display must be connected to one of these two ports. The 14-pin plug of the ISO connecting cable must be connected with the electronics box. The base plate for the charging cradle may also be connected to the “charger” output socket. Fig. 13: Electronics box connection [1] FWD Phone book [2] [4] [3] [5] [6] 20 | 21 7 Operating instructions ROAD SAFETY RISK! Failure to pay attention can lead to dangerous situations in traffic. You must always direct your complete attention to current traffic conditions, even when speaking with a hands-free device. It is advisable to avoid phone calls while driving in difficult traffic situations! NOTE: Depending on the software, individual functions may not be available! 7.1 Features 7.1.1 Overview of features The hands-free EGO FLASH system supports the Bluetooth® hands-free profile. The EGO FLASH is the practical all-rounder for phoning in the car and offers the following range of functions: → → → → → → → → → → EGO FLASH Call functions, such as incoming/outgoing calls, call waiting, alternate between calls, conference calling, and redial Integrated voice control Intuitive voice dialing directly from your mobile phone’s contacts list (without training) Allows users to read and reply to SMS messages Voicemail Dictation function Contacts list and call lists Music player – replay of music files on mobile phones, iPodsTM or MP3 players via Bluetooth® Audio Streaming (A2DP) Automatic radio muting Can be buddied with up to 10 mobile phones 7.2 Symbols The control unit of the EGO FLASH features an OLED display and a total of 6 keys. The illustration below gives a quick overview of the keys. The functions of the individual keys are explained in this section. 7.2.1 Key functions → The key (green) is for accepting calls. Prolonged pressing of the key will also launch voice control. Possible voice commands can be found in the “Voice control” chapter of these operating instructions. Another function is the selection of menu items. When listening to music, this key controls both the play and pause functions. Functions in brief: Accept call, select menu items, launch voice control, play, pause, end screensaver → The key (red) is used to reject incoming calls and to end completed calls (hang up). During music playback, the song may be stopped with the key. Functions in brief: Hang up, reject, stop, end screensaver → During music playback, the key can be used to skip forward to the next title. This key can also be used to navigate the menu and speller. Functions in brief: Skip forward to next title, navigate menu and speller, end screensaver → The key controls the reverse-skip function during playback. This key can also be used to navigate the menu and speller. Functions in brief: Reverse skip, navigate menu and speller, end screensaver 22 | 23 → The key is used to increase volume during a phone call and during music playback. This key can also be used to navigate the menu and speller. Functions in brief: increase volume, navigate menu and speller, end screensaver → The key is used to decrease volume during a phone call and during music playback. This key can also be used to navigate the menu and speller. Functions in brief: Reduce volume, navigate menu and speller, end screensaver NOTE: The EGO FLASH features a screen saver. After 60 seconds of inactivity, the display automatically switches off. Pressing any key will switch the display back on. Pressing a key in this case does not perform any function, but merely switches the display back on. 7.2.2 Symbols in the status bar Field strength symbol – indicates the current strength of the reception field es SMS symbol – indicates text messages received llls Arrow symbol – indicates missed calls FWD Indicates the user’s initials Battery symbol – indicates the battery capacity of the mobile phone EGO FLASH Fig. 14: Status bar The status bar is located in the upper area of the display and shows the symbols described in this section. 7.2.3 Speller symbols Symbol for confirming input Symbol to delete the last character Symbol for changing to numeric input az Symbol for changing to lowercase letters Symbol for changing to uppercase letters Symbol for changing to special characters Symbol for exiting the speller 7.2.4 Symbols for menu options Activated option. This symbol appears in front of an activated menu item. Deactivated option. This symbol appears in front of a menu item when it may be activated as an option. 7.3 Speller The EGO FLASH is controlled with the keys. The key is used to confirm a selection, and the key quits the speller. The speller allows phone numbers or names to be composed from individual letters or numbers. It is available for various functions of the EGO FLASH, such as for dialing a phone number or to create a contacts list entry. Operation of the speller is explained below: 24 | 25 → Entering numbers Navigate by pressing the keys to reach a specific number and accept it by pressing the key. You may delete the last numeral entered by pressing the symbol. Once the complete number has been entered, it can be dialed by pressing the symbol. To quit the speller, press and hold the key. → Entering names or text As with entering numbers, you can use the speller to enter names or text. Navigate by pressing the keys to reach a specific letter and accept it by pressing the key. You may delete the last letter entered by pressing the symbol. Once the name has been completely entered, it can be saved by pressing the symbol. To quit the speller, press and hold the key. Switching between uppercase, lowercase and special characters is possible with the symbols described in Chapter 7.2.3, which can be selected with the keys. 7.4 Getting started Take enough time to familiarize yourself with the use of the EGO FLASH in combination with your mobile phone. First of all, make a few calls to determine the ideal volume and the best voice pickup direction before using the EGO FLASH in traffic. When getting started, your car should be parked in a quiet place. It is also helpful if the person you will be calling can take time to let you make some test calls. 7.4.1 About Bluetooth® technology Bluetooth® technology is a wireless technology and, as such, it allows communication between individual devices without the need for cables. Data and voice information can be transmitted simultaneously. It is unnecessary to have line-ofsight routing between the devices. The transmission/reception range in the open is typically 33 feet. Interference from other electrical or electronic equipment or obstacles may, however, reduce this range. The frequency band, in which Bluetooth® operates, is reserved virtually worldwide. This, coupled with the fact that each Bluetooth® product is tested and approved for compatibility with other Bluetooth® devices, ensures the highest possible levels of compatibility with devices from a wide range of manufacturers. The EGO FLASH system supports the Bluetooth® hands-free profile. This EGO FLASH means that it is fully compatible with all phones supporting the Bluetooth® hands-free profile. If you are uncertain, read the operating instructions for your mobile phone to see which profiles are supported. A2DP (Advanced Audio Distribution Profile) is a technology that enables the wireless transmission of stereo audio signals via Bluetooth® to a compatible receiving device. Please take a look at our homepage for information about compatible mobile phones. 7.4.2 On / Off function The first time you use your EGO FLASH, you must start the EGO FLASH by turning the ignition key. You will see the starting logo and the main display screen. If no connection to a mobile phone exists or no user is found, the functionality of the main menu is restricted. In order to connect to the EGO FLASH, you must select the “User management” menu item with . “New user” is then selected. The EGO FLASH will then search for mobile phones within its range of reception. If it fails to find your mobile phone, you may repeat the search, or read the section on “Troubleshooting”. When the name of your mobile phone is shown, select it with the key. After a connection is established with the EGO FLASH, the main menu is fully functional. Functionalities that are not supported by the mobile phone are not selectable. If the ignition is switched off, the EGO FLASH shuts itself off. If the ignition is switched off during a phone call, the call continues without interruption. The EGO FLASH will shut itself off only after the phone call is ended. 7.4.3 Enter Bluetooth® PIN After a few seconds you will be prompted to enter your Bluetooth® PIN. Enter the PIN shown on the EGO FLASH display onto your mobile phone. 7.4.4 Hands-free mode In some cases, coupling with your mobile phone in the hands-free mode does not work when using the method described above. If you are sure that your mobile phone supports the Bluetooth® hands-free profile, proceed as follows: In the list of detected devices, select “couple from phone”. Now you need to search for Bluetooth® devices using your mobile phone. The procedure for this can be found in the operating instructions for your mobile phone. The mobile phone will then start searching for devices. Select the EGO FLASH from the list of devices found by your mobile phone. During the coupling 26 | 27 process, your mobile phone will prompt you to enter a PIN or password. At this point, please enter the series of numbers shown on the display of the EGO FLASH. After a short time, the mobile phone should inform you that coupling was successful. You may also cancel the coupling at any time by pressing the key. If coupling fails, please read the section on “Troubleshooting”. 7.4.5 Automatic coupling If the phone is already connected with the EGO FLASH, the EGO FLASH will try to couple to this phone. If the search is successful, a connection is automatically established. A search is always performed for the most recently connected mobile phone. If the search process was unsuccessful, it‘s possible that Bluetooth® or the mobile phone is not turned on, or that you were not the last user. If you would like to select another user, activate user management and log this user in. 7.5 The menus Use the keys to navigate menu items. Select a menu item with the key or quit the menu with the key. Select the submenu of the current menu by once again pressing the key. The following menu items may be selected and are listed in the following menu overview: → User management User-specified settings such as “change initials”, “log in”, “log out”, etc., can be set out under this menu item. New users can also be logged on. For details, please see the “User management” chapter. → Settings General settings for the EGO FLASH can be entered under this menu item. These range from “Ringtone” to “Software update” to “Voicemail”. The exact breakdown can be found in the following overview, which depicts the menu structure. You can find more information in the “Settings” chapter. EGO FLASH → Music player The “Music player” menu allows you to playback songs and to control them as usual with Play, Pause, Stop, Forward, and Reverse. The playback device can be coupled to the EGO FLASH under “Options”. For details, see the “Music player” chapter. → Dictation function The dictation function allows you to record and playback memos. All voice recordings are listed under the menu item. The dictation function is described in detail under the chapter of that name. → Contacts list The contacts list contains the entries downloaded from the mobile phone. Each number in an entry can be accessed. In addition, direct outward dialing is possible here (without voice control). You can fi nd more information in the “Contacts list” chapter. → Call lists Contains lists of the last number dialed, calls received, and missed calls. You can highlight an entry with the keys and call the number with the key. For more information, please see the “Call list” chapter. → Messages Contains the list of text messages (SMS). Unread messages are marked accordingly. The messages menu is divided into “Read messages” and “New message”. More information can be found in the “Messages” chapter. 28 | 29 Main menu structure for the EGO FLASH User management → New user → User 1 Settings → - Change initials Contacts list Call lists Messages Playback → New recording → Search → Missed call - Melody - Play → Recording 1 → Entry 1 → Calls received - Call back → → Read message - Volume - Pause - Listen → Entry 2 → Number dialed 1 - Answer → Brightness - Stop - Delete → ... → Number dialed 2 - Send - Log out → Call settings - Forwards Recording 2 → Entry ... → ... - Send number - Reverse - Listen → Options → Number dialed ... User 2 - Call waiting - Change initials - Automatic answer - New device - Device 1 → → Options - Log in → Delay - Log out → Factory settings - Connect → - Direct dial - Send - Synchronize - Edit - Listen - SIM - Delete - Telephone - SIM + telephone → Software update - Disconnect → ... ... → Info - Delete → Recording ... → User 10 → Help Language → Voice control - Disconnect - Start - Delete - Recognition language Audio management - Mic sensitivity - Line in - Volume - Line out → Voicemail - On / off - Record text - Listen to text - Listen to recording → Switch off - Device 2 - Connect - Device ... New message Recording 3 - Delete → - Edit → - Delete → → EGO FLASH Dictation function - Log in - Delete → Ringtone Music player 7.5.1 User management Symbol: The EGO FLASH allows you to manage up to 10 user profiles; you can quickly and easily switch between these profiles while using the EGO FLASH. Individual information saved for each user includes the following: → → → → → → → → Contacts list Display brightness Ringtone Display language Volume settings Voicemail Dictation device Call lists Opening user management To enter user management, go to the symbol in the main screen display and press . You will then see the user with which the EGO FLASH established coupling, and the “New user” menu item. If no user is coupled, only the “New user” item appears. Add new user To register a new user, you must select the “New user” item with the steps are the same as those shown in the “Getting started” chapter. keys and press . The remaining Change user’s initials Open user management. Then select a user and press . You then reach a submenu. There, select the “Change initials” item. Using the speller, you can now edit the name of the user. 30 | 31 Reset user To delete all user information, open user management. Select the user you want to reset. Confirm your selection by pressing the key. A menu then opens. Select “Delete” in this menu. All data for this user is now deleted from the EGO FLASH. Switch user To switch users, go to “User management” and select the desired user. Confirm your selection by pressing the A submenu then opens. Select “Log in” in this menu. If the selected user can be found, the users are switched immediately. If the user cannot be found, the menu jumps back to “User management”. key. Log out user You can disconnect the current Bluetooth® connection within “User management” under the current user with the “Log out” menu item. 7.5.2 Call If there is an existing Bluetooth® connection between the EGO FLASH and a mobile phone, you can use the hands-free function of the EGO FLASH. If there is no connection, you cannot use the hands-free function. You must first establish a Bluetooth® connection. You may dial a number with voice-activated dialing, through the menu or directly on the mobile phone. Incoming call If the mobile phone is available over the Bluetooth® connection, the call is signaled with the ringtone on your mobile phone. Otherwise a signaling tone is generated by the EGO FLASH. If the caller has not blocked display of his phone number, and if the mobile phone supports this function, the display of the control unit will show the caller’s number or, if a corresponding entry is found in the contacts list, the caller’s name. You can decide whether to take the call (green key or key) or reject it (red key or key). If you accept the call, you can adjust the volume with the keys. The settings are saved. You can end the call by pressing the key. EGO FLASH Call setup Call setup from the EGO FLASH is only possible if there is an existing Bluetooth® connection between the EGO FLASH and the mobile phone. You may set up a call with voice-activated dialing or through the menu. To activate voice-activated dialing, press the key for longer than half a second. With the “Dial number” command, you may announce the number to be dialed, and with the “Dial” command, a name from the contacts list can be dialed directly. For more details, please see the section “Voice control”. The following methods may be used to initiate a call from the menu: → → → → by selecting from the contacts list and the mobile phone by direct outward dialing of a number with the number speller dialing from the call list on your mobile phone through the call-back feature for received SMS messages And lastly, you may also dial a number directly on your mobile phone. IMPORTANT NOTE: Please observe your country’s regulations on in-car telephone use! Call ended Once a call is ended, the menu jumps back to the main menu. If an incoming call is rejected with the jumps to the previous menu. Setting the volume The replay volume may be adjusted during a call and during active voice recognition with the key, the menu keys. TIP! If the person you‘re speaking with cannot hear you well, consider increasing the sensitivity of the microphone in the “Audio management” menu under “Settings”. There is a risk, however, that this may produce annoying echoes. 32 | 33 Options during phone calls The following options may be activated during a phone call by pressing the → DTMF tones → Mute mic. → Private mode → Record → Alternate between calls key: → DTMF tones Here, touch key tones are selected and then sent by means of the speller. → Mute mic. With this option, the microphone can be switched to mute. The person you have been speaking with can then no longer hear you. Pressing again deactivates the muting of the microphone. → Private mode During a phone call, you may switch to private mode by selecting the “Private mode” menu item and pressing the key. Conversation is now possible only via the mobile phone. At this moment, communication via the EGO FLASH is prevented, and the other occupants in the car cannot hear the conversation. Pressing the key again quits private mode. Important note: In most countries, phoning while driving is only allowed when using a hands-free system. → Record If the need to record an important call arises, this can be achieved with the “Record” function. The person you are FLASHing to is then informed that the conversation is being recorded. The recording can then be retrieved from the “Voicemail” folder. EGO FLASH → Call waiting If the call waiting feature in your mobile phone and the EGO FLASH is switched on, while you are FLASHing to another person, incoming calls from third parties are signaled. The name or number of the third calling party is displayed, if possible. You can accept the call with the key or reject it with the key. If you accept the call of the third party, the active caller is automatically put on hold. If you reject the third calling party, the conversation with the active caller is continued. → Alternate between calls Alternating between calls is accomplished by pressing the key. Next, select the “Alternate between calls” context menu item. The active caller is displayed as the top entry. You may alternate back and forth between the callers by again pressing the key. When alternating, the volume of the active caller can be adjusted with the keys. → Voicemail If you are unable to answer a call, voicemail is activated, and information left by the caller is accepted. When the call is ended or when the allotted recording time is exceeded, voicemail is switched off. When voicemail is activated, the call is accepted in the background, and the user can listen along to the message; the message is recorded. If voicemail is activated by a caller in the call-waiting system, the call can not be heard by the user. Important note: In most countries, phoning while driving is only allowed when using a hands-free system. 7.5.3 Contacts list Symbol: The mobile phone’s contacts list can be read via the “Contacts list” menu item. In addition to dialing numbers from the contact information with the key, entries can be found more quickly with the search function. You may also download the contacts list from the mobile phone under the “Option” menu item, or enter the number via direct outward dialing. 34 | 35 Read To read numbers from the contacts list, please select the menu item. After opening the contacts list, all entries contained in the list are displayed. Select the number or name you want to call and press the key. The numbers stored under this name are then displayed. By pressing the key once again, the number is dialed. Search If searching for a particular name becomes difficult due to a large number of entries, the search function may be used. With this function, entries may be searched for a specific name or specific first letters. The desired name or first letters can be entered by using the speller. By pressing the key, the contacts list will be searched for this name or letter. Direct dial Direct dialing is possible in addition to voice-activated dialing. As described under the “Speller” and “Call setup” items, a number can be entered here by hand using the speller. The call is set up after confirming the number with the key. Synchronize The contacts list from the mobile phone or SIM card can be downloaded to the EGO FLASH unit under the “Synchronize” menu item. Both contact lists may also be synchronized. Once a contacts list has been selected, it is confirmed with the key. Now a loading progress bar is displayed. This signals the current progress of the synchronization process. If downloading is successful, the entries can be found in the contacts list for the EGO FLASH. It remains possible to cancel the download manually with the key. If you decide to cancel the process, this must then be confirmed once again at the Yes/No query. With “Yes”, the synchronized entries are deleted and the menu jumps back to “Contacts list”. At “No”, synchronization is continued. 7.5.4 Call lists Symbol: In the “Call list” menu item, you may view “Numbers dialed”, “Missed calls”, and “Calls received”. After selecting the “Call list” menu item, a list of numbers dialed is downloaded from the mobile phone. “Missed calls” EGO FLASH and “Calls received” may also be viewed by selecting the corresponding upper list entries. Some mobile phones do not support access to the call list; in this case, a call list is maintained within the EGO FLASH. 7.5.5 Voicemail The “Voicemail” item can be found under the “Settings” menu. It may be activated or deactivated here. It is also possible to record a message that will be played when voicemail is launched. The recorded message can be played back in order to check it. Information left by a caller within voicemail can be replayed under the “Listen to messages” item. 7.5.6 SMS Symbol: The EGO FLASH supports the sending and receiving of text messages. The menu is structured in same form users are familiar with from their mobile phones. Messages received can be viewed under the “Incoming SMS” item. The sender of the message can be called back by phone using the “Call-back” function. You may also reply to the sender with a text message (SMS). In addition, new messages may be recorded. Various templates are available for this purpose. Here you have the possibility to modify the templates as you wish, under the “Edit” item. To send, press the “Send” key and select a name from the contacts list or enter the telephone number directly. If for some reason the text message is not sent, the EGO FLASH informs the user and jumps back to “Edit text” mode. If the mobile phone does not support the sending of SMS messages via Bluetooth®, then the “SMS” menu item cannot be selected in the EGO FLASH. 7.5.7 Music player Symbol: The music player is activated through the main menu. The music player may also be activated without a mobile phone being couple to the EGO FLASH. In order to play back music, the EGO FLASH must be coupled to an A2DP-capable device (such as a mobile phone with A2DP, an iPod™ or an MP3-Player with A2DP adapter). 36 | 37 Connection / coupling Under the “Option” menu item, a “New device” may be coupled, or an already coupled device may be connected. A total of 10 devices may be coupled, whereas only one device may be active. If a “New device” is selected, a Bluetooth® device search is performed. The desired device can be selected from there. If the music device does not support coupling from other devices, it is also possible to couple the EGO FLASH from the music device via the “Couple from device” menu item. In both cases, a four-digit PIN code is displayed by the EGO FLASH, which must be entered into the music device. Is the PIN is incorrect, the menu jumps back to device selection, and you must repeat the process. If an iPod™ or MP3 player with an A2DP adapter is used, these devices couple automatically with the EGO FLASH. For this, the “Couple from device” menu item must be selected during the search for devices. After coupling, all playback functions are available to the user. Playback The following functions are available for playback and are shown in the display: → Play → Pause → Stop → Forwards (by title) → Reverse (by title) → Volume setting (playback volume adjustable in 10 steps) These functions are controlled with the keys of the control unit. For a description of these keys, please see the “Symbols” chapter. 7.5.8 Dictation function Symbol: Record The dictation function allows you to record voice messages. This function is especially useful while driving, when the EGO FLASH user does not have paper and pen handy. The user now has the possibility to store important information as a voice message. To do so, the “New recording” item is selected and confirmed with the key. Once the recording is ended by the user manually, it is stored in the list for retrieval. If the space for storing the recordings becomes full, this is signaled. It then becomes possible to record again only after old recordings have been deleted. Listen To listen to a recording, search for the corresponding recording, and press the user. Delete If a recording is to be deleted, select the recording to be deleted, press the pressing , the recording is deleted. key. The recording is played for the key, and go to the “Delete” item. By 7.5.9 Settings Symbol: The “Settings” menu is highly complex, since many settings for the EGO FLASH can be carried out under this menu item. The following settings can be carried out: → → → → → → → → → Ringtone Brightness Call settings Delay time Factory settings Software update Info Help Language 38 | 39 → → → → Voice control Audio management Voicemail Switch off Ringtone The “Ringtone” menu is subdivided into “Melody” and “Volume”. Under “Melody”, multiple ringtones are available, which can be set according to personal preference. The “Volume” of the ringtones can be set with the keys. Brightness The brightness of the display can be adjusted here to the needs of the user. Call settings → Send number The “Send number” feature can be switched on or off here. This setting is dependent on the network. → Call waiting The call waiting feature can be switched on or off here. If this feature is activated, calls from a third party will be signaled during an active phone call. → Automatic call answer If this option is activated, incoming calls are automatically answered after three rings. Delay time You may determine how long the EGO FLASH should remain active after switching off the ignition. The delay time may be set in steps between 0 and 30 minutes. Factory settings This resets all settings back to the standard factory settings. In doing so, all user settings including the contacts list are lost. EGO FLASH Software update The software for your EGO FLASH can be updated via Bluetooth®. For more details, please see the section “Software update”. Info Provides information about the various software and hardware versions of your EGO FLASH. Use this information when you contact our service department with questions and problems. Language The EGO FLASH supports multiple display languages. You can change the display language within this menu item. Voice control → Start Carrying out this item launches voice control. Control is performed with specific commands. For more information see the “Voice control” chapter. → Recognition language If your EGO FLASH features multiple languages, you may select the language here. Audio management → Microphone sensitivity In some circumstances, such as when the microphone is located very far from or very near to the driver, it may be necessary to adjust microphone sensitivity. There are 10 possible levels of sensitivity that may be selected for the EGO FLASH. The sensitivity is shown to the right of the display as a bar. A total of 5 bars can be seen, whereby each bar has two levels. Sensitivity can be adjusted with the keys. Do not set the microphone at too high a level of sensitivity, as this can lead to overamplification and poor audio quality for the person you are speaking with. → Line in In this menu item, you may activate the line in and vary the input volume of the audio device connected to the line in of the electronics box. 40 | 41 q Note: Please note that only the connection of an audio device with line level is allowed. If the electronics box’s line in is overamplified through an excessively high signal from the line out of the audio device, the volume must be reduced on the audio device. → Volume The base volume of the line out as well as the ringtone and call playback through the speaker output of the electronics box can be adjusted within this menu item in 5 steps. → Line out The channel for call playback can be set under this menu item. The items “right”, “left”, and “right + left” are available. Voicemail Voicemail functions can be switched on and off here. The user still has the option to record and listen to messages and to playback recordings. For more information see the “Voicemail” chapter. Switch off The current Bluetooth® connection is severed under this item and the EGO FLASH is switched off. The EGO FLASH may be switched back on by pressing a single key. 7.5.10 Voice control The dialogue-guided voice control of the EGO FLASH allows you to select a name or number via voice input. While numerical selection allows you to directly announce a number, you also have the option to select the name directly from the contacts list. Switch recognition language Depending on the national version of your EGO FLASH, voice recognition supports up to 3 languages, one of which is activated. To switch the active recognition language, within the menu, select “Setting → Voice control → Recognition language”. A list of available languages is now displayed. Select the desired language and confirm it by pressing the EGO FLASH button. The EGO FLASH will now save your settings and will begin updating the recognition language. The status of this process will be displayed with a progress bar. Activation and sequence Voice control is only possible when there is no phone call in progress. If under these circumstances the key is pressed for longer than a half-second, the “Main menu” standby text sounds, and the display shows the announcement, “Please begin speaking …”. You may cancel each voice dialogue at almost any time with another prolonged pressing of the key. If the EGO FLASH is waiting for a voice command, you may end the dialogue by saying “abort”. If there is no Bluetooth® phone connected to the EGO FLASH, voice-activated dialing cannot be activated. The following voice commands are possible: → “Call / dial ” → “Call at home / at private number… at work / in the office / on business … mobile / on the mobile phone / in transit … → “Dial number” → “Show (number / name) dialed” → “Show missed calls” → “Show accepted calls” → “Save (memo / note)” → “Listen to (memos / notes)” → “Help” → “Last number redial” → “Abort” “Call / Dial ” This command may be used to select a name from the contacts list. The name must be contained in the contacts list for this command to function. If the name is not recognized or found, the EGO FLASH responds with “Please repeat” 42 | 43 and offers you the chance to repeat the command. If the name is recognized, you will be asked if the name should really be dialed. The following commands are available to you: → → → → “Yes / Call / Dial” “No / Return” “Abort / Cancel“ “Help” Dials the number stored under that name The number for the recognized name is not dialed Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands “Call / Dial at home … in transit” With this command, you may dial a specific type of number from a contacts list entry. If the name is recognized, you will be asked if the name should really be dialed. The following commands are available to you: → → → → “Yes / Call / Dial” “No / Return” “Abort / Cancel“ “Help” Dials the number stored under that name The number for the recognized name is not dialed Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands “Dial number” You will be prompted to enter the number to be dialed. This may be done with individual numerals as well as groups of numbers. If you insert a pause, the last number/group of numbers entered is repeated for checking. In addition, you will be notified if you exceed the maximum telephone number length. In addition to continuing with the entry of numerals, the following additional commands are available: → „+, *, #, 0, 1, …, 9“ → “Delete all” → “Delete / Correct / Change” EGO FLASH For entering the number To delete the entire phone number entered To delete the last number/group of numbers entered → → → → → → “Repeat” “Yes / Call / Dial” “No / Return” “Save” “Abort / Cancel“ “Help” To announce the entire phone number entered up to this point To dial the phone number entered To not dial the number entered To save the number entered Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands “Show (number / name) dialed” This requires that numbers / names are included in the call list. If there is no entry, the EGO FLASH informs the user. After the command, all numbers / names dialed are shown on the display. Afterwards, the following commands are available to you: → “Call/dial ” → “Call/dial entry number <1-20>” → “Yes / Call / Dial” → “No / Return” → “Abort / Cancel“ → “Help” To dial the name in the call list To dial a numbered entry in the call list To confirm the selection of the number/name To not dial the number/name in the call list Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands Some mobile phones may not support a call list via Bluetooth®. If this is the case, the EGO FLASH cannot show any entries with this command. “Show missed calls” This requires that numbers / names are included in the call list. If there is no entry, the EGO FLASH informs the user. After the command, all numbers / names that have been dialed are shown on the display. Afterwards, the following commands are available to you: 44 | 45 → “Call/dial ” → “Call/dial entry number <1-20>” → “Yes / Call / Dial” → “No / Return” → “Abort / Cancel“ → “Help” To dial the name in the call list To dial a numbered entry in the call list To confirm the selection of the number/name To not dial the number/name in the call list Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands Some mobile phones may not support a call list via Bluetooth®. If this is the case, the EGO FLASH cannot show any entries with this command. “Show calls received” This requires that numbers / names are included in the call list. If there is no entry, the EGO FLASH informs the user. After the command, all numbers / names that have been dialed are shown on the display. Afterwards, the following commands are available to you: → “Call/dial ” → “Call/dial entry number <1-20>” → “Yes / Call / Dial” → “No / Return” → “Abort / Cancel“ → “Help” To dial the name in the call list To dial a numbered entry in the call list To confirm the selection of the number/name To not dial the number/name in the call list Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands Some mobile phones may not support a call list via Bluetooth®. If this is the case, the EGO FLASH cannot show any entries with this command. EGO FLASH “Save (memo / note)” This command initiates recording of a spoken note. The EGO FLASH checks if enough memory is available. The user can save the message and end the recording with the key. There is no command for ending the recording. Afterwards, the following commands may be given: → → → → “Yes / Save” “No / Return / Reject” “Abort / Cancel” “Help” To save the memo To reject the memo Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands “Listen to (memos / notes)” With this command, it is possible to listen to the recorded memos. Only one memo is played. With the correct command, you can listen to the next note. The following commands are available: → → → → → → “Next / Continue” “Repeat” “Delete” “No / Return” “Abort / Cancel” “Help” To play the next note To replay the note To delete the note To return to the main menu Ends the dialogue without carrying out a function Calls up Help and an explanation of possible commands “Help” As with “Cancel”, this command may be used at any time. If the “Help” command is selected, the EGO FLASH explains which commands are possible for specific functions at the time they are called up. 46 | 47 “Last number redial” This command you provides you with the simplest way to redial the most recently dialed phone number. No further dialogue follows. Dialing is only possible when the mobile phone is logged in. An announcement will then inform you when dialing begins. “Abort / Cancel” With his command, the current dialogue is ended immediately without any function being carried out. EGO FLASH 8 Software update The software for your EGO FLASH can be updated to the latest version via Bluetooth®. In order to receive the most current software, please visit our website at www.fwd-online.de. A detailed description of the update procedure is included with the software. 48 | 49 9 Service (FAQ) – A list of frequently asked questions 1. Is it possible to dial directly (without voice control) with the EGO unit? Yes, with all EGO units except EGO TALK, under the menu item “Contacts list / Options / Direct outward dialing”. 2. What are the exact dimensions of the EGO FLASH components? You can find the dimensions in the operating instructions under the “Technical data” section. 3. Are EGO units suitable for all types of vehicles? Yes, EGO units are suitable for all types of vehicles. See installation instructions! 4. Is there a list of optional charging cradles? Yes. A list of optional cradles is available on our website. 5. Are software updates for the units free? Yes. 6. Where can EGO be purchased? From authorized specialty dealers. You can find a specialty dealer in your area through our website under the link Dealers → Dealer search. 7. What is the procedure for transferring data in order to playback music? Data transfer is possible with the EGO FLASH in two ways (Bluetooth® and Line-in). It is possible to make an MP3 player and iPod™ Bluetooth®-capable with a dongle/adapter. If an MP3 player without A2DP is used, a jack cable can be used to connect it to the EGO FLASH. 8. Do EGO units have an external antenna port? In combination with the optional charging cradle and the associated base plate, the mobile phone can be connected to the external antenna port. EGO FLASH Troubleshooting Problem Cause Remedy No supply voltage Replace fuse if needed and check cable and connections Ignition not switched on Switch on ignition Ignition line interrupted Check line and 1A fuse The microphone is not plugged in Connect the microphone to the electronics box. If the cable is defective, replacement is necessary Air is fl owing across the microphone Mount the microphone in another place or reduce air fl ow if needed The mobile phone is very close to parts of the EGO FLASH or the car radio Increase the distance between your mobile phone and the EGO FLASH or radio Too little space between the microphone and speaker Increase distance or decrease volume Volume too high Reduce volume The mobile phone cannot fi nd the EGO FLASH during coupling EGO FLASH is already coupled with a device Cancel existing connection Sound is fuzzy or scratchy Poor Bluetooth® connection Reduce the distance between the mobile phone and EGO FLASH or remove (metallic) obstructions if needed The mobile phone is not within range. Place the mobile phone within the range of the EGO FLASH The Bluetooth® interface is deactivated in the mobile phone. Switch your mobile phone’s Bluetooth® to "On" ("Automatic" option is not suffi cient) The mobile phone requires confi rmation of the connection setup. Confirm the connection on the mobile phone. Deactivate the security prompt (see operating instructions for the mobile phone) One of the devices no longer has a valid link key. Delete the other device from both devices’ list of coupled devices and perform a new coupling. EGO FLASH won’t switch on The person you are having a phone conversation with cannot hear you The person you are having a phone conversation with complains of interference The person you are having a phone conversation with complains of echoes After switching on the ignition, the connection to the coupled mobile phone is not produced. 50 | 51 10 Spares parts and accessories You can find out more about supported mobile phones on our website at www.fwd-online.de. Your dealer will also be happy to advise you if you have any questions. Accessories: Stereo Mute Box Relax and listen to music or phone from your car. The Stereo Mute Box provides smart sound management. This compact box plays your calls or music over the car‘s speakers – of course in superb stereo sound. The car radio is muted during calls or when listening to music. Features: - Radio muting during calls or music playback (Audio Streaming) - Stereo music reproduction in combination with the car‘s front speakers - Phone audio over the front speakers Base plate with charging cradle The charging cradle is a practical accessory for Bluetooth® hands-free systems by Funkwerk Dabendorf. The charging cradle holds your mobile phone firmly and allows you to recharge its batteries in your car and is an ideal accessory for drivers who are constantly on the road and often need their phones. In addition, the external antenna connection ensures outstanding reception and transmission. Features: - Intelligent charging circuit for mobile phones - Mobile phone safely and securely held in the charging cradle - External antenna connection for excellent call quality EGO FLASH Replacement parts: [1] Electronics box [2] Control unit with display [3] Microphone [4] Set of connecting cables [5] Adapter cable FWD Anrufliste [1] [2] [5] [4] [3] 52 | 53 11 Technical data Outer dimensions of the electronics box Outer dimensions of control unit with display Control unit cable lengths Operating voltage Quiescent current consumption (ignition off) Steady plus fuse protection Ignition fuse protection Temperature range Interfaces Supports Bluetooth® profiles 5.138 in x 2.126 in x 0.886 in 3.039 in x 3.039 in x 0.906 in 6,56 ft 11 V to 15 V max. 0.1 mA 2A 1A -10°C to +55°C Microphone connection, line in, line out, accessory port, power supply terminal and charging connection Hands-free, A2DP, AVRCP 12 Certification 0681 Fully compliant with the EU R&TTE Directive 1999/5/EC 03 5073 Model certification according to EU Directive 72/245/EWG (2006/28/EC) “Electromagnetic compatibility in motor vehicles” ® Bluetooth® is a registered brand name of Bluetooth SIG, Inc. EGO FLASH 13 Conformity statement This equipment employs Bluetooth® wireless technology. In some countries, the use of this equipment may be restricted or forbidden. Please make sure you are familiar with such restrictions and do not use your equipment if you are unsure whether its use is permitted in particular countries you may be visiting. Bluetooth® is a registered brand name of Bluetooth SIG, Inc. Funkwerk Dabendorf GmbH Märkische Straße D-15806 Dabendorf Confirms that the hands-free system “EGO FLASH” complies with the fundamental requirements and other relevant regulations of the EU Directive 1999/5/EC. 0681 54 | 55 FCC statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: → → → → Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications made to this equipment not expressly approved by FWD may void the FCC authorization to operate this equipment. FCC Radiation Exposure statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. EGO FLASH 14 Hotline Any questions, comments, or suggestions? Would you like some more detailed information? Do you need an adviser or service in your area? Just give us a call! Our service hotline is there to help you during the following times: Monday–Thursday Friday from 7.00 a.m. to 5.00 p.m. from 7.00 a.m. to 4.00 p.m. Before you call us with your problem, please check first with the following steps: → → → Check whether you can solve your problem with the „Troubleshooting“ checklist in Chapter 8. Make sure you have your hands-free system and holder set type available. Try to explain your problem as precisely as possible. You can contact our service hotline by dialing: From Germany: Phone: 0800 - 0 393 393 From outside Germany: Phone: +49 (0) 3377 - 316 233 +49 (0) 3377 - 316 234 +49 (0) 3377 - 316 244 Fax: 56 | 57 Funkwerk Dabendorf GmbH Märkische Straße 15806 Dabendorf Germany Phone +49 (0) 3377 316 - 0 Fax +49 (0) 3377 316 - 300 Email info@fwd-online.de Internet www.fwd-online.de A Funkwerk AG company
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Fill forms, Extract, Print high-res Page Mode : UseThumbs XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Create Date : 2007:08:23 12:16:21+02:00 Modify Date : 2007:08:23 12:24:18+02:00 Creator Tool : Adobe InDesign CS3 (5.0) Metadata Date : 2007:08:23 12:24:18+02:00 Producer : Acrobat Distiller 8.1.0 (Macintosh) Format : application/pdf Creator : Title : Document ID : uuid:e450bad6-4e03-094c-ac23-62188f540c6c Instance ID : uuid:743b86ad-7ac4-9343-99d8-ba7b6a6bd674 Page Count : 58 Page Layout : TwoPageRightEXIF Metadata provided by EXIF.tools