Moor Technology SZMOORCN888 Wireless Inspection Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1458540
Application ID	HhivzjksevMbG0uqbuDkYA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.97kB (974650 bits)
Date Submitted	2011-05-03 00:00:00
Date Available	2011-05-03 00:00:00
Creation Date	2011-05-03 17:08:21
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2011-05-03 08:40:07
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User Manual
Wireless Inspection Camera with Color LCD Monitor
Version 1.0
Please read this User Manual carefully before using this product
Contents
WELCOME.................................................1
PACKING LIST............................................ 1
STRUCTURE .............................................. 2
INSTALLATION ........................................... 3
GENERAL SAFTY INFORMATION................6
OPERATION...............................................6
SPECIFICATIONS.......................................8
CAUTIONS.................................................9
FCC INFORMATION.....................Back cover
* MG-5808(Monitor) + MG-6808(Camera)
WELCOME
Thank you for choosing our wireless inspection video camera kit and
please read the operation guide carefully before using the product.
The product is designed as a remote inspection device, which can be
used to look into tight spots, aperture or pipes to check via color real-time
video.
Its typical applications include HVAC inspection, automotive inspection,
cable routing, boat/vehicle/aircraft inspection etc.
PACKING LIST
Camera×
LCD Monitor×
Adapter× 1
Video Cable× 1
Mirror× 1
Magnet× 1
Lantern Ring×
Extension tube(Optional)
Screwdriver×
Hook× 1
STRUCTURE
Power Indicator
Flexible Tube
Power ON/OFF
Signal
output
Battery Cabinet
Camera and LEDs
Power Indicator
Video Output
Power Supply
Contrast
Brightness
LCD ON/OFF
Image Orientation
Signal Input
INSTALLATION
Please install the batteries and tube first before using, and choose the
accessory according to actual application.
Steps of installation as below:
Step 1: To install batteries
1. Using a screwdriver and remove the screws and open the battery cover.
2. Insert four new AA batteries in the battery compartment directly.
Proper battery orientation is indicated on the battery compartment.
3. Close the battery cover and screw as before.
NOTE: Dry your hands before installation or replacing batteries.
Step 2: To install the camera with flexible tube
Connect the camera with flexible tub to the body and make sure the
keyed ends are properly aligned. Once they are aligned, tighten the
knurled knob to hold the connection in place.
Keyed ends
Finger Tighten
Step 3: To install accessory
The three included accessories: Mirror, Hook and Magnet, all attached
to the camera by the same way. To install as below:
Use the green lantern ring
to hitch the tube
Put accessories into the hole
Slide the green lantern ring to lock the accessories
Make sure put each accessory into the hole of the stem of camera part,
and slide the green clip to lock each accessory.
Step 4: To install monitor for wired use
The product also supports wired by connecting the monitor to the body
with camera.
Step 5: To connect monitor's power
Plug the connect cable into the power socket of monitor, and plug the end
of connect cable to adapter, then connect the adapter to 6V power, the
power indicator will lights as red, which indicates being charging.
The built-in Li-battery will be charged after the adapter is plugged in,
and the red color indicator lights up during charging and will turn off after
a full charge.
TIP: The Monitor can be used when it is charging.
Step 6: Video output
Insert the video cable into the VIDEO OUT socket of monitor. Insert the
other end of the cable into VIDEO IN jack of a TV or another monitor. The
LCD Monitor will out put a high quality video.
GENERAL SAFTY INFORMATION
Warning: Read and understand all installations. Failure to
follow all instructions listed below may result in electrical
shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS BELOW
★ Prevent object and liquid entry. Never spill liquid of any kind on the
video display unit. Liquid increases the risk of electrical shock and
damage to the product.
★ The unit is not shock-resistant. Do not use it as a hammer or drop it.
★ Do not immerse the camera and the monitor in water. Store in a dry
place. Such measures reduce the risk of electrical shock and damage.
The imager head and the cable are water resistant when the unit is
fully assembled, but the camera and the monitor are not.
★ Do not use the camera if condensation forms inside the lens. Let
the water evaporate before using again.
OPERATION
1. Roll the ON/OFF switch to turn ON the camera, and the power indicator
will light. The switch then acts as a dimmer for the twin LEDs that
surround the camera on the imager head and provide lighting.
LEDs
Provide lighting
2. Slide the ON/OFF switch to ON position, and power indicator will light
as green and then the picture will display on LCD. Adjust brightness,
contrast, image orientation and roll the ON/OFF switch of the camera
for better image effect.
The switch acts
as a dimmer
3. When using, the tube should easily maneuver itself into position going
forward.
TIP: The flexible tube can be bent to a certain shape. This may help
you explore the tube into narrow areas.
4. The accessories of Handhold Inspection Camera can be used to
retrieve small items like dropped rings or screws.
SPECIFICATIONS
Model No.: MG6808
Value
Camera
Image sensor
1/13-inch CMOS
Effective Pixels
640
Transmission frequency
2468MHz
Minimum illumination
0 Lux
Modulation Mode
FM
Bandwidth
18 MHz
Unobstructed Effective Range
10 m
Power Supply
4 AA batteries
Waterproof level
IP 67
Dimensions
190
480
150
42(mm)
(Exclude Flexible Tube)
550 g
Weight
Model No.: MG5808
Value
Monitor
LCD screen
2.4" TFT LCD
Effective pixels
480
Video System
PAL/NTSC
Transmission frequency
2468MHz
Exterior supply voltage
6V DC
Consumption current (MAX)
490mA
Video output level
0.9-1.3v @75ohm
Receiving sensitivity
≤ -85dBm
Dimensions
110
Weight
150g
Operation Humidity
-10℃~+50℃/-14℉~+122℉
Operation Temperature
15-85％RH
240
75
35mm
＊Actual transmission range may vary according to the weather, location,
interference and building constructions.
＊All the specifications are subject to minor change without prior notice.
CAUTIONS
◆ The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquid, such as vases, shall be placed on the
apparatus.
◆ Turn off the Camera and Monitor if not use.
◆ The adapter is used as the disconnect device from the mains.
The adapter shall remain readily operable.
◆ The Camera/Monitor can only be completely disconnected from the
mains by unplugging the adapter.
◆ Do not cut the DC power cable of the apparatus to fit with another
power source.
◆ Attention should be drawn to the environment aspects of batter
disposal.
◆ Remove the batteries when cleaning the unit.
◆ Remove the batteries before storing the unit for a long time.
◆ When necessary, REPLACE ALL FOUR BATTERIES in this unit with
new ones.
◆ Use only the size and type of the battery specified.
◆ Be sure to install the battery with correct polarity as indicated in the
battery compartment.
◆ Properly dispose of the battery. Exposure to high temperatures can
cause the battery to explode. So do not dispose of in a fire. Please
tape over the terminals to prevent direct contact with other objects.
Some countries have regulations concerning battery disposal. Please
follow all applicable regulations.
The graphics included are subject to minor change without prior notice.
CAUTIONS
This device complies with part 15 of the FCC rules. Operation is subject
to the following two regulations:
1) this device may not cause harmful interference;
2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
EU ENVIRONMENTAL PROTECTION
Waste electrical products should
not be disposed of with household waste.
Please recycle where facilities exist.
Check with your local Authority
or retailer for recycling advice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2011:05:03 17:08:21+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:05:03 08:40:07-07:00
Metadata Date                   : 2011:05:03 08:40:07-07:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : 
Document ID                     : uuid:3c90757e-49a5-4908-9617-042dd1d10e26
Instance ID                     : uuid:586570f6-5fd5-44bd-bca5-899b6c1a225a
Page Count                      : 12
Author                          : Administrator

EXIF Metadata provided by EXIF.tools