Motion Access MATRIX Door Radio Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2428399
Application ID	M4+WZghO+ua1eYyj9OJFUA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.43kB (92910 bits)
Date Submitted	2014-10-27 00:00:00
Date Available	2014-10-27 00:00:00
Creation Date	2014-10-01 09:25:28
Producing Software	Bullzip PDF Printer / www.bullzip.com / Freeware Edition (not registered)
Document Lastmod	2014-10-03 09:45:28
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

MOTION
ACCESS, LLC
automatic entrance solutions
MATRiX
Transmitter / Receiver
Changes or modifications not expressly approved by MotionAccess could void the user's authority to operate the equipment. This device
complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1) Single Door Setup
2) Sequenced Doors Setup
Transmitter: MAX-TX
Transmitter: MAX-TX
The Sequence Delay is not used for single doors. It is
only used for sequenced doors.
Signal
Output
Sequence
Delay
1 2
Frequency Code
Set the Sequence Delay to the desired time between
door "A" & "B" activations. The range of this
potentiometer is 1-20 seconds.
Set Signal
Output dip
switch #2 to
ON (up).
Switch #1 is
not used.
Signal
Output
Sequence
Delay
1 2
1 2
12
Frequency Code
Set Signal
Output dip
switch #2 to
OFF (down).
Switch #1 is
not used.
12
ON
ON
Set the 12 Frequency Code switches to the desired
positions. This code must match the Receiver
Frequency Code. Note: Dip switch "UP" is "ON".
Receiver: MAX-RX
10-36Vac/8-25Vdc
10-36Vac/8-25Vdc
Normally Closed
common
Normally Open
Set the 12 Frequency Code switches to the desired
positions. This code must match the Receiver "A"
Frequency Code. Note: Dip switch "UP" is "ON". The
Receiver "B" Frequency Code is the same as "A"
except with switch #2* in the opposite position.
Receiver: MAX-RX
Set the Hold ON Time to the
desired duration of the activation
signal. The range of this
potentiometer is 1-20 seconds.
Frequency Code
12
Hold ON
Time
10-36Vac/8-25Vdc
10-36Vac/8-25Vdc
Normally Closed
common
Normally Open
1 2
ON
Match the 12 Frequency Code switches to the
Transmitter Frequency Code. Note: Dip switch
"DOWN" is "ON".
Notes: The receiver antenna must protrude through the
operator housing. The maximum relay capacity is 1A @
120Vac / 30Vdc.
MAXTRiX_MNL_revB
Set the Hold ON Time to the
desired duration of the activation
signal. The range of this
potentiometer is 1-20 seconds.
Frequency Code
12
Hold ON
Time
ON
For Receiver "A", match the 12 Frequency Code
switches to the Transmitter Frequency Code. Note:
Dip switch "DOWN" is "ON". The Receiver "B"
Frequency Code will be the same as "A" except
with switch #2* in the opposite position.
Notes: The receiver antenna must protrude through the
operator housing. The maximum relay capacity is 1A @
120Vac / 30Vdc.
For technical assistance call 866-357-8832

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2014:10:01 09:25:28-05:00
Modify Date                     : 2014:10:03 09:45:28+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Bullzip PDF Printer / www.bullzip.com / Freeware Edition (not registered)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:10:03 09:45:28+08:00
Document ID                     : 4a5fd187-4bd2-11e4-0000-2a96806195c7
Instance ID                     : uuid:93cf271c-286f-4eab-b5c8-f92dd69c9e94
Format                          : application/pdf
Title                           : 
Creator                         : Administrator
Page Count                      : 1

EXIF Metadata provided by EXIF.tools