Motorola Mobility H270 Bluetooth Wireless Headset User Manual H270 OneSide

Motorola Mobility LLC Bluetooth Wireless Headset H270 OneSide

User manual

TROUBLESHOOTINGMy phone does not find my headphones.Make sure the L indicator light on your headphones is on and steady when your phone is searching for devices (see step 3).My headphones worked with my phone before but now their not working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headphones again (see step 3).Support.If you need more help, contact us at1-877-MOTOBLU or visit us atwww.hellomoto.com/bluetooth and click Support.MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © 2008 Motorola, Inc. All rights reserved.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.motorola.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 68000202001-ABluetooth QD ID: BxxxxxxBefore using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.Take a moment before you get started to familiarize yourself with your newH270 Headset.BEFORE YOU BEGINCall ButtonPower SwitchVolumeButtonMicrophoneSpeakerEarhookIndicator LightSTART HERE >1CHARGE Your Headset's BatteryVerify slide switch is in the off position (toward the charging port).Plug the Motorola charger into the end of the headset.The indicator light turns red or purple when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns blue.Disconnect the charger.12Note: Headset is not functional while charging.Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges.32START BLUETOOTH FEATUREYour PhonePress (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Select Change.Scroll to On.Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.12345Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.For most Motorola phones (at the main menu):M3PAIRYour Headset and PhoneBefore you can use your headset, you must pair (link) it with your phone.Step A - ENSURE HEADSET IS IN PAIRING MODEPower on headset by sliding the Power switch towards the microphone to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. If the headset does not enter pairing mode, see TROUBLESHOOTING for help.Indicator Light(steadily bluefor pairing)Power SwitchStep B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET34512For most Motorola phones:On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.Select Motorola H270.Select OK or Yes to pair your headset with your phone.Enter the passkey: 0000Select OK.When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue and purple.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.M4TEST AND USEYour phone and headset are now paired and ready to make and receive calls. To make a call: Place the headset over your ear.On the phone, dial the number you want to call and press SEND key on your phone.If your phone and headset are successfully paired, you will hear ringing on the headset.After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.12IMPORTANT: Be sure to first follow thesteps on the top row of this guideto complete initial setup of your H270.Features and Functions TURNING HEADSETON AND OFFTo turn your headset on, slide the switch toward the microphone. The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired).To turn your headset off, slide the switch toward the charging plug. The indicator light flashes three times then turns off.Power SwitchIndicator LightWEARING THE HEADSETTo wear your headset, flex the earhook and loop it over your ear as shown.Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort.CHANGING FOR USEON OTHER EARYou can wear your H270 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:Gently lift and pull the top of the earhook upand off speaker stem, as shown.Flip the headset over.Attach the earhook to the speaker stem, as shown.123MAKING CALLSNote: Your H270 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.Note: Some features are phone/network dependent.Function ActionReceive a call Tap the Call buttonReject a call Press and hold a Volume button until the ringer stopsEnd a call Tap the Call buttonMake a voice dial call Tap the Call button and wait for voice promptAnswer second incoming Use phone to answer call (follow your phone’s instructions)INDICATOR LIGHTWith the Charger Plugged InHeadset Indicator Headset StatusRed Charging (battery level less than 70% charge)Purple Charging (battery level more than 70% charge)Blue Charging completeNote: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE YOUR BATTERY WILL DAMAGE THE PRODUCT.With No Charger Plugged InHeadset Indicator Headset StatusOff Power offThree blue flashes Powering on/offSteady blue Pairing/connect modeRapid blue/purple flashes Connection successfulQuick blue flash Incoming/outgoing callSlow blue pulse Connected (on a call)Slow blue flash Standby (not on a call)Slow red flash Idle (not connected to phone)Steady red Attempting to connectQuick red flash Low batteryNote: After 30 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. INDICATOR LIGHT AUDIO TONESAudio Tone Headset StatusAscending tone Powering onTwo descending Powering offtonesRing tone Incoming callTwo short tones when Volume at minimumpressing Volume button or maximumHigh/low tones Low batteryrepeated every 60 sec.No audio indications; Out of rangedeteriorating qualityTwo ascending tones Connected to phoneUSING YOUR H270SeeFeatures and Functions on the bottom row for information onusing your H270Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again (see step 3).Note: To restore your headset to original factory settings, press and hold both Volume and Call buttons at the same time and slide Power switch to ON. TROUBLESHOOTINGMy headset will not enter pairing mode.Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesn't find my headset.Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).My headset worked before but now it's not working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).Support.If you need more help, contact us at 1-877-MOTOBLU or visit us at www.motorola.com/Bluetoothsupport• The essential requirements and other relevant provisions of Directive 1999/5/EC.• All other relevant EU Directives.European Union Directives Conformance StatementProductApprovalNumberThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.Hereby, Motorola declares that this product is in compliance with:Quick Start GuidemotorolaH270DRAFTDRAFT

Navigation menu