Motorola Mobility H270 Bluetooth Wireless Headset User Manual H270 OneSide

Download:
Mirror Download [FCC.gov]
Document ID	995791
Application ID	wEJDFUHMwp79pRu34IYTBw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	127.37kB (1592069 bits)
Date Submitted	2008-09-04 00:00:00
Date Available	2008-10-15 00:00:00
Creation Date	2008-08-19 11:39:41
Producing Software	Adobe PDF library 7.77
Document Lastmod	2008-09-02 15:33:17
Document Title	H270_OneSide
Document Creator	Adobe Illustrator CS2

BEFORE YOU BEGIN
CHARGE
Your Headset's Battery
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
(toward the charging port).
Earhook
2 Plug the Motorola charger into the end of the
Speaker
Call Button
Microphone
Indicator Light
Quick Start Guide
Power Switch
START HERE >
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.motorola.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 68000202001-A
Bluetooth QD ID: Bxxxxxx
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2008 Motorola, Inc. All rights reserved.
PAIR
Your Headset and Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
Before you can use your headset, you must pair
For most Motorola phones:
(link) it with your phone.
1 On your Motorola phone, press M (Menu ) >
Step A - ENSURE HEADSET IS IN PAIRING
Settings > Connection > Bluetooth Link >
MODE
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
1 Verify slide switch is in the off position
Volume
Button
START BLUETOOTH
FEATURE
Your Phone
Take a moment before you get started to
familiarize yourself with your new
H270 Headset.
motorola
H270
Features and
Functions
IMPORTANT:
Be sure to first follow the
steps on the top row
of this guide
to complete initial setup
of your H270.
headset.
The indicator light turns red or purple when
the battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns blue.
3 Disconnect the charger.
For most Motorola phones (at the main menu):
1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
2 Scroll to Power.
Power on headset by sliding the Power switch
towards the microphone to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
3 Select Change.
Indicator Light
(steadily blue
for pairing)
4 Scroll to On.
5 Press Select to turn on the Bluetooth
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
TURNING HEADSET
ON AND OFF
To turn your headset on, slide the switch
toward the microphone. The indicator light
flashes blue three times, then flashes in
blue and purple (if connected with a device)
or is steadily blue (if ready to be paired).
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
WEARING THE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
Power Switch
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
CHANGING FOR USE
ON OTHER EAR
You can wear your H270 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
1 Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
To turn your headset off, slide the switch
toward the charging plug. The indicator light
flashes three times then turns off.
2 Flip the headset over.
3 Attach the earhook to
the speaker stem, as
shown.
Indicator
Light
Power Switch
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2 Select Motorola H270.
3 Select OK or Yes to pair your headset with
your phone.
4 Enter the passkey: 0000
5 Select OK.
When your headset successfully pairs and
connects with your phone, the indicator
light changes from steadily lit to flashing
blue and purple.
TEST AND USE
USING YOUR H270
See
Features and
Functions
on the bottom row
for information on
using your H270
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
1 Place the headset over your ear.
2 On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
Note: If desired, your headset can be restored to
original factory settings. This action will erase all pairing
information stored in your headset. Thus, you will need
to pair your phone and headset again (see step 3).
Note: To restore your headset to original factory
settings, press and hold both Volume and Call buttons
at the same time and slide Power switch to ON.
Function
Receive a call
Reject a call
Action
Tap the Call button
Press and hold a
Volume button until
the ringer stops
End a call
Tap the Call button
Make a voice dial call
Tap the Call button
and wait for voice
prompt
Answer second incoming Use phone to answer
call
(follow your phone’s
instructions)
Note: Your H270 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Note: Some features are phone/network dependent.
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
European Union Directives
Conformance Statement
Hereby, Motorola declares that
this product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.motorola.com/Bluetoothsupport
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
MAKING CALLS
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds,
then turn headset back on. Wait for the indicator
light to become steadily lit in blue, indicating
the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
INDICATOR LIGHT
With the Charger Plugged In
Headset Indicator
Headset Status
Red
Charging (battery
level less than 70%
charge)
Purple
Charging (battery
level more than 70%
charge)
Blue
Charging complete
Note: Your battery is designed to last the life of the product.
It should only be removed by a recycling facility. ANY
ATTEMPT TO REMOVE OR REPLACE YOUR BATTERY
WILL DAMAGE THE PRODUCT.
INDICATOR LIGHT
With No Charger Plugged In
Headset Indicator
Off
Three blue flashes
Steady blue
Rapid blue/purple flashes
Quick blue flash
Slow blue pulse
Slow blue flash
Slow red flash
Steady red
Quick red flash
Headset Status
Power off
Powering on/off
Pairing/connect mode
Connection successful
Incoming/outgoing call
Connected (on a call)
Standby (not on a call)
Idle (not connected
to phone)
Attempting to connect
Low battery
Note: After 30 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
AUDIO TONES
Audio Tone
Ascending tone
Two descending
tones
Ring tone
Two short tones when
pressing Volume button
High/low tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Two ascending tones
Headset Status
Powering on
Powering off
Incoming call
Volume at minimum
or maximum
Low battery
Out of range
Connected to phone
TROUBLESHOOTING
My phone does not find my headphones.
Make sure the L indicator light on your
headphones is on and steady when your phone
is searching for devices (see step 3).
My headphones worked with my phone
before but now their not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature has been turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2). If you
have confirmed the Bluetooth feature is on in
your phone, pair your phone and headphones
again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : H270_OneSide
Creator Tool                    : Adobe Illustrator CS2
Create Date                     : 2008:08:19 11:39:41-05:00
Modify Date                     : 2008:09:02 15:33:17+08:00
Metadata Date                   : 2008:09:02 15:33:17+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 80
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 11765 bytes, use -b option to extract)
Document ID                     : uuid:A7592EEB086EDD119926C0D03AA068A5
Instance ID                     : uuid:7db94288-0ab2-46a5-aa83-a5aea1e39039
Derived From Instance ID        : uuid:A6592EEB086EDD119926C0D03AA068A5
Derived From Document ID        : uuid:9ABA60E0A65CDC1196B3AD89510EA2F1
Producer                        : Adobe PDF library 7.77
Has XFA                         : No
Page Count                      : 2
Creator Version                 : 12
Container Version               : 9
Creator                         : Adobe Illustrator(R) 12.0
For                             : Rick Lazier, Harbor Light Communications
Bounding Box                    : -731 62 1403 711

EXIF Metadata provided by EXIF.tools