Motorola Mobility P56KY1 i296 PORTABLE iDEN/MOTOTALK MOBILE WITH BLUETOOTH User Manual Exhibit 12

Download:
Mirror Download [FCC.gov]
Document ID	1229165
Application ID	VO6ii0qgfV7Q+35Tc2RgRA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	140.93kB (1761585 bits)
Date Submitted	2010-01-18 00:00:00
Date Available	2010-03-21 00:00:00
Creation Date	2010-01-14 13:45:36
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2010-01-14 13:47:40
Document Title	Exhibit 12
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	y10319

FCC ID: IHDP56KY1
FCC Filing Package for Motorola i296 Transceiver
Motorola Confidential Restricted
Exhibit 8: Draft User’s Manual -- 47 CFR 2.1033(b)(3)
The attached User’s Manual is the final production-intended version of the generic Motorola
International English User Manual. This guide will be adapted to carrier-specific versions, but the key
information herein will be retained. Translations into other languages will also be done to support the
needs of other markets. Minor revisions may be made to these manuals, prior to and subsequent to,
placing this product onto the market. Selected portions of the User Guide can be found as indicated
below:
8.1
Part 15B Declaration of Conformity:
Page 4
8.2
Safety Section:
Page 84
8.3
Specific Absorption Rate (SAR) Data:
Page 92
8.4
Guidance for use with Hearing Aids:
Page 47, 97
iDEN, Motorola Inc., 600 North US Hwy 45, Libertyville, IL 60048, USA
WWW.MOT.COM/iDEN
i294
i296
User’s Guide
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i294, i296
Model Number: H88XAH6JR2BN (i294), H88XAH6JR2AN (i296)
FCC-ID: IHDP56KY2 (i294), IHDP56KY1 (i296)
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
FCC Notice to Users
The following statement applies to all products that have
received FCC approval. Applicable products bear the FCC logo,
and/or an FCC ID in the format FCC-ID: IHDP56KY2 (i294),
IHDP56KY1 (i296) on the product label.
Motorola has not approved any changes or modifications to this device by
the user. Any changes or modifications could void the user’s authority to
operate the equipment. See 47 CFR Sec. 15.21.
Class B Digital Device
As a personal computer peripheral, this device complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may
not cause interference and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
See RSS-GEN 7.1.5.
Motorola, Inc.
Consumer Advocacy Office
600 North US Highway 45
Libertyville, IL 60048
www.hellomoto.com
Note: Do not ship your phone to the above address. If you need to
return your phone for repairs, replacement, or warranty service,
please contact the Motorola Customer Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other
Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2009.
Manual Number: NNTN7906A
HELLOMOTO
Introducing your new Motorola wireless phone. Here’s a quick anatomy lesson.
Left Soft Key
Perform function
in lower left
display.
Volume Buttons
PTT Button
2.5mm Audio
Jack
Micro USB
Connector
Connects charger
and accessories.
Speaker Key
On/Off Key
Menu Key
From home screen,
open main menu.
Talk Key
Make &
answer calls.
4-Way Navigation
Key
Right Soft Key
Perform function
in lower right
display.
End/Power Key
End calls, exit
menu system,
turns phone
on/off.
OK Key
In menus & lists,
press to select
highlighted option.
check it out
Press and hold the
Power Key for a
few seconds, or until
the screen lights up,
to turn on your phone.
Ready
10:05pm 10/23
Press the Navigation Key
up, down, left or right
to highlight a menu feature.
Customizable r key
that can be used
to open the
Settings screen.
Press the r key
to select.
contents
check it out . . . . . . . . . . . 2
menu map. . . . . . . . . . . . 6
use and care . . . . . . . . . . 8
essentials . . . . . . . . . . . . 9
about this guide . . . . . . 9
SIM card. . . . . . . . . . . 10
battery . . . . . . . . . . . . 10
turn it on & off . . . . . . 13
enable security . . . . . . 13
make a phone call. . . . 13
answer a phone call . . 13
advanced calling . . . . . 14
make a private call . . . 14
answer a private call. . 15
store a phone number
or private ID . . . . . . . . 16
contacts . . . . . . . . . . . 16
call a stored phone
number or private ID .
find your phone
number and private ID
messaging . . . . . . . . .
MMS features . . . . . .
inbox. . . . . . . . . . . . . .
outbox . . . . . . . . . . . .
sent items . . . . . . . . .
customize messaging.
datebook. . . . . . . . . . .
using your phone as a
modem . . . . . . . . . . . .
basics. . . . . . . . . . . . . . .
display . . . . . . . . . . . .
main menu . . . . . . . . .
text entry . . . . . . . . . .
volume . . . . . . . . . . . .
17
17
17
18
21
26
26
28
34
35
36
36
37
37
40
navigation key. . . . . . .
handsfree speaker . . .
transmitters . . . . . . . .
use GPS with map
software . . . . . . . . . . .
features for the
hearing impaired. . . . .
TTY . . . . . . . . . . . . . . .
security features. . . . .
main attractions . . . . . .
media center . . . . . . .
PTX features . . . . . . . .
one touch PTT . . . . . .
PT manager . . . . . . . .
Bluetooth® . . . . . . . . .
call features. . . . . . . . . .
turn off a call alert. . . .
recent calls . . . . . . . . .
contents
41
41
41
41
42
43
44
45
45
46
53
54
55
58
58
58
redial . . . . . . . . . . . . . .
caller ID . . . . . . . . . . . .
call forward . . . . . . . . .
voice names . . . . . . . .
emergency calls . . . . .
international calls. . . . .
speed dial . . . . . . . . . .
voice mail . . . . . . . . . .
selective dynamic
group (SDG) calls. . . . .
MOTOtalkTM . . . . . . . . . .
switch to MOTOtalk . .
exit MOTOtalk . . . . . . .
channels and codes. . .
private MOTOtalk calls
making emergency
calls while in
MOTOtalkTM mode . . .
setup options. . . . . . . .
customize. . . . . . . . . . . .
ring tones . . . . . . . . . .
backlight . . . . . . . . . . .
contents
59
59
59
60
61
61
62
62
63
67
68
68
68
71
72
73
75
75
76
wallpaper . . . . . . . . . . .
hide or show location .
Legal and Safety . . . . . .
Safety and General
Information . . . . . . . . .
Operational
Precautions . . . . . . . . .
RF Energy
Interference/
Compatibility . . . . . . . .
Caring for the
Environment by
Recycling . . . . . . . . . . .
Driving Precautions . . .
Operational Warnings .
Service and Repairs. . .
Export Law
Assurances . . . . . . . . .
Battery Use and Safety
Battery Charging . . . . .
Specific Absorption
Rate . . . . . . . . . . . . . . .
76
77
79
79
80
80
81
82
82
84
84
85
87
87
AGPS and Emergency
Calls. . . . . . . . . . . . . . .
Limited Warranty
Motorola
Communications
Products (International)
Hearing Aid
Compatibility With
Mobile Phones . . . . . .
Information From
the World Health
Organization . . . . . . . .
Product Registration . .
Wireless: The New
Recyclable . . . . . . . . . .
California Perchlorate
Label . . . . . . . . . . . . . .
Patent and Trademark
Information . . . . . . . . .
Software Copyright
Notice . . . . . . . . . . . . .
88
89
92
92
93
93
93
93
94
Privacy and Data
Security . . . . . . . . . . . 94
Smart Practices While
Driving . . . . . . . . . . . . 95
index . . . . . . . . . . . . . . . 97
contents
menu map
main menu
1 Net
Java Apps
• Java System
Settings
• (see next page)
VoiceRecord
• [New VoiceRec]
Contacts
• [New Contact]
• [New SDG List]
• [New Msg Group]
Messages
• [Create Message]
• Voice Mail
• Inbox
• Drafts
• Outbox
• Fax Mail
• Net Alert
• Sent Items
Call Forward
Datebook
Call Timers
• Last Call
• Phone Reset
• Phone Lifetime
• Prvt/Grp Reset
Memo
• Prvt/Grp Life
• Kbytes Reset
Recent Calls
Shortcuts
• [New Entry]
• 1)Shortcuts
• 2)Cntcs[New Contact]
• 3)Recent Calls
• 4)Contacts
• 5)Datebook
• 6)Messages
• 7)VoiceRecord
• 8)Net
• 9)Call Forward
My Info
• My Name
• Line 1
• Line 2
• Private ID
• Group ID
• Carrier IP
• IP1 Address
• IP2 Address
Quick PTT
Profiles
Call Alert
GPS
• Position
• Privacy
• Interface
Ring Tones
• Vibrate All: On/Off
• Ringer
• Vibrate
• Silent
MOTOtalk
• Go To MOTOtalk
• Setup
• Help
Media Center
Bluetooth (i296 only)
• Hands Free
• Link to Devices
• Device History
• Setup
• Find Me
PT Manager
• Quick PTT
• Send Message
• Send Picture
• Send Event
• Send My Info
• Send Contact
• Configure
This is the standard Main Menu layout.
Your phone’s menu may be a little different.
settings menu
Display/Info
• Wallpaper
• Text Size
• Theme
• Home Icons
• Backlight
• Clock
• Menu View
• Large Dialing
• Language
Phone Calls
• Set Line
• Any Key Ans
• Auto Redial
• Call Waiting
• Auto Ans
• Minute Beep
• Call Duration
• TTY
• Hearing Aid
• Notifications
• DTMF Dialing
• Prepend
2-Way Radio
• Tkgrp Silent
• Tkgrp Area
• One Touch PTT
• Alert Type
• PTT Quick Notes
• On/Off PTT
• Store Rcvd Info
Personalize
• Menu Options
• Up Key
• Down Key
• Left Key
• Right Key
• Center Key
• Left Sftkey
• Right Sftkey
• Power Up
Volume
• Line 1
• Line 2
• Messages
• Earpiece
• Speaker
• Keypad
• Java Earpiece
• Java Spkr
• Data
Security
• Phone Lock
• Keypad Lock
• SIM PIN
• GPS PIN
• Change Passwds
Advanced
• Alert Timeout
• Headset/Spkr
• Connectivity
• Reset Defaults
• Return to Home
• Transmitters
• Phone Only
• Baud Rate
use and care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind
dust and dirt
Don’t expose your phone to water, rain,
extreme humidity, sweat, or other
moisture. If it does get wet, don’t try to
accelerate drying with the use of an
oven or dryer, as this may damage the
phone.
Don’t expose your phone to dust, dirt,
sand, food, or other inappropriate
materials.
extreme heat or cold
cleaning solutions
Avoid temperatures below 0°C/32°F or
above 45°C/113°F.
To clean your phone, use only a dry soft
cloth. Don’t use alcohol or other
cleaning solutions.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray-edged pages
at the back of this guide.
about this guide
This guide shows how to locate a menu
feature as follows:
Find it: / > u > Phone Calls
This means that, from the home screen:
1 Press the menu key / and then press
the Settings u menu option .
2 Press the navigation keys to scroll to Phone
Calls, and press the center key r to
select it.
symbols
This means a feature is network or
subscription dependent and may
not be available in all areas, or might
not be offered by your service
provider. Contact customer service
for more information.
This means a feature requires an
optional accessory.
essentials
SIM card
battery
insert the SIM card
Note: Please consult “Battery Use and
Safety” on page 85 before using this product.
battery installation
1 Press down on the battery door latch,
and slide the battery door up.
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
10
essentials
2 Remove the battery door.
battery charging
New batteries are not fully charged.
3 Push the battery down until it clicks in
place.
charge using the charger
1 Pull out the connector cover, and insert
the charger into the micro USB connector
on your phone as shown.
4 Replace the battery door, and slide it
toward the base of the phone until it
locks into place.
essentials
11
charge from your
computer
You can partially charge your phone’s battery
by connecting a Motorola-approved USB cable
from your phone’s micro USB port to a high
power USB connector on a computer (not a
low-power one, such as the USB connector
on your keyboard or bus-powered USB hub).
Typically, USB high-power connectors are
located directly on your computer.
battery indicators
12
essentials
The battery is at approximately 100%
to 90% capacity when the indicator is
blue and displaying three bars.
The battery is at approximately 65%
capacity when the indicator is green
and displaying two bars.
The battery is at approximately 10%
capacity when the indicator is yellow
and displaying one bar.
The battery is at approximately 5%
capacity when the indicator is red
and has a flashing red bar.
The battery is charging.
turn it on & off
To turn on your phone,
press and hold @ for a few
seconds or until the display
turns on. If prompted, enter
your four-digit unlock code.
Note: If you press the @ for more than four
seconds, the phone will turn on in Transmitters Off
mode. See “transmitters” on page 41.
To turn off your phone, press and hold @ for
a few seconds.
enable security
You will need to enable security the first time
you power on your phone or within 10 days of
first activation of your phone.
1 Press K under Ok.
2 You are prompted to enable security.
Press K under Yes and follow on screen
instructions.
3 Press @ to return to the home screen.
make a phone call
Enter a phone number and press ` or use a
voice command. See “place a call using a
voice name” on page 60.
To hang up press @.
answer a phone call
• If you want to answer the call on
speaker phone, press the speaker key
).
• If you want to answer the call using the
phone, press `. To hang up press @.
essentials
13
• If you are using a Bluetooth headset,
press the answer key on your headset.
To hang up press the key again.
advanced calling
feature
call waiting To accept the second call
and put the active call on
hold press K under Yes.
3-way call
To accept the second call
and end the active call press
`.
Make or receive a phone call
and press / > 3 Way. Enter
the second phone number,
press ` and K under Join.
You cannot make any other
calls during a three-way call,
even if one party hangs up.
14
essentials
feature
any key
answer
To answer phone calls by
pressing any key on the
keypad press / > u >
Phone Calls > Any Key Ans > On.
make a private call
Your Private ID is the number at which you
receive one-to-one Private calls.
Talkgroup numbers are numbers through
which you receive one-to-many group calls.
to make a Private call
1 Enter the Private ID you want to call.
2 Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
3 Release the PTT button to listen.
To end the call press @.
Note: A Private call ends automatically if there
is no activity on the call for a few seconds.
send call alerts
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
When you send a call alert, the recipient’s
phone displays your name and emits a series
of beeps or vibrations.
to send a call alert
1 Enter the Private ID you want to call.
2 Press K under Alert.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful appears.
answer a private call
1 When your phone emits a chirping sound
or vibrates to indicate you are receiving a
Private call, wait for the caller to finish
speaking.
2 Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
3 Release the PTT button to listen.
To end the call press @.
answer a call alert
When you receive a call alert, you cannot
receive phone calls or Private calls until you
do one of the following:
option
Answer
Press the PTT button to begin a
Private call with the sender.
essentials
15
option
Queue
Clear
Press K under Queue to store the
call alert to the call alert queue.
Press K under Clear to dismiss
and delete the call alert.
store a phone number
or private ID
You can store a phone number or private ID in
Contacts:
Find it: / > L > [New Contact]
1 Enter a name for the new entry. Each
entry’s name can contain 20 characters.
2 Select a Ring Tone.
3 Select a type for the entry (Mobile, Private1,
Private2, Work1, Work2, Home, Email1, Email2, Fax,
Pager, Talkgroup, IP or Other). To store a private
ID choose Private1 or Private2.
16
essentials
4 Enter the number for the entry and press
K under Save when done.
contacts
feature
edit/delete
contact
entry
Press K under Contcs. Select
a contact and press / >
Edit. Change the desired
content and press r. Press
K under Save.
set ringer ID Press K under Contcs. Select
a contact and press / >
Edit. Select Ringer and chose
your desired ring tone. Press
K under Back.
call a stored phone
number or private ID
Find it: / > L
1 Scroll to the Contacts entry.
2 If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
displayed (Mobile, Private1, Private2, Work1,
Work2, Home, etc.).
3 If you chose a phone number, press ` to
call the entry, or if you chose a Private ID,
Talkgroup ID, or SDG List, press and hold
the PTT button to call the number.
find your phone number
and private ID
messaging
Your phone has the ability to use both SMS
and Multimedia Messaging Service (MMS)
messaging. The type of messaging your
phone uses will be determined by your
service provider.
Additionally, MMS allows you to send and
receive messages that may include text,
pictures, and audio files.
create and send messages
1 From the home screen press K under
Msgs > [Create Message].
2 Enter the phone number of the person
you want to send the message to and
press r or press K under Search. Select
Contacts or Recent Calls to find the number you
want.
Find it: / > My Info
essentials
17
3 Select Mesg: and enter the text of the
message or to use a quick note press K
under QNotes and scroll to the quick note
you want then press r.
MMS features
4 If you want to send the message, press
K under Send or to delete the message
without sending it, press K under Cancel.
more message options
quick notes
When you are filling in the Mesg and Subject
fields, you can add ready-made words or short
phrases called Quick Notes. After you add
these words or phrases, you can edit them as
you would any other text.
Note: The following features are available only
when using MMS.
To view more message fields in a message
you are creating, select ....More....
The following options become available:
option
Subject
Attach
1 While you are creating a message, scroll
to or select Mesg or Subject.
Cc
2 Press K under QNotes.
Auto Replies
3 Select the quick note you want to insert
into the message.
4 Press K under Send.
18
essentials
Create or edit the subject line.
Attach a picture, audio file, or
voice record.
Send a copy of this message to
someone else.
Allows you to create a list of
possible short answers for the
recipient to choose when
replying to your message.
option
Priority
Valid Until
Set priority Normal or High.
Set a date after which attempts
to deliver the message end, or
press K under No Date.
insert a picture and audio
recording
You can insert one or more pictures, and audio
files from the media center into the body of
the message. You can include text in the body
of your message in addition to these items.
insert items
While you are writing your message, press
/, select Insert and choose from Add QNotes, Add
Picture, Insert Audio, or Record Voice.
Select the picture or audio recording you want
to insert. You can only insert one item at a
time.
To remove an item from a message, highlight
it and press K under Delete.
attach a picture or audio
recording
You can attach one or more pictures, audio or
voice recordings from your phone to a
message. You can include text in the body of
your message in addition to these items.
1 While you are filling in the Attach field,
press [New] > and select from Browse Pictures,
Browse Audio, or Record Voice.
A list of available pictures, audio files, or
voice recordings appears.
2 Select the picture, audio or voice record
you want to attach.
essentials
19
If you want to attach more items, select
[New].
4 When you are finished recording, press
r.
3 When finished, press K under Done.
5 When finished, press K under Done.
Note: You can only attach audio files and
pictures if they are not forward locked and if
their DRM settings do not prevent you from
sending.
6 The voice record is attached to the
message and saved to the media center
and the list of voice records.
Forward locked items are usually copyright
protected, and you cannot share them with
anyone, such as in Private calls or by
uploading them from your phone.
create a new voice record
You can create a new voice record to send
with a message:
1 Press / or select Attach > [New].
2 Select Record Voice.
3 Say the message you want to record into
the microphone.
20
essentials
remove an attachment
To remove an attachment in a message you
are creating:
1 Select Attach.
2 Scroll to the attachment you want to
remove.
3 Press / > Unattach.
use drafts
When you save a message as a draft, it is
saved in the drafts folder.
Find it: Press / > E > Drafts
1 Select the draft you want to edit.
2 To edit the fields you want to change,
follow step 2 through step 4 in “create
and send messages”.
delete a draft
receive a message
• To view the message, press K under
Read.
• To dismiss the message notification
press K under Exit.
When you send a draft, it is removed from the
Drafts folder.
While reading a text and numeric message
that contains a phone number, you can press
` to call that number.
1 To delete a message in the Drafts folder
without sending it, scroll to the message
you want to delete and press K under
Delete.
threaded inbox
2 Press K under Yes to confirm.
inbox
Find it: Press / > E > Inbox
The threaded Inbox allows you to organize
your messages by subject or sender.
From the Message Center, press / >
Threading, and select from None, Subject, or Sender.
Note: Threading by subject is dependant
upon your service provider.
essentials
21
read from the message center
lock and unlock messages
1 From the home screen press K under
Mesg > Inbox.
Locked messages cannot be deleted until you
unlock them.
2 Select the message you want to read.
1 View the message you want to lock or
unlock.
3 To reply to the message, press K under
Reply.
2 Press / > Lock Message or Unlock Message.
delete unread messages
call a number in a message
1 Scroll to the message you want to delete.
forward a message
If a message you receive contains a phone
number, Private ID, or Talkgroup ID in the From
field, the To field, the Cc field, the Subject field, or
the body of the message, you can call or send
a call alert to that number.
1 Press / > Forward.
send a call alert
2 Create and send your message.
Embedded objects and attachments are
included when you forward a message.
1 View the message.
2 Press K under Delete and K under Yes to
confirm.
2 Highlight the Private ID or Talkgroup ID
you want to alert.
3 Press / > Alert.
22
essentials
4 Push the PTT button.
make a group call
1 View the message.
2 Highlight the Talkgroup ID you want to
call.
3 Press /.
4 Select Talkgroup.
5 Push the PTT button.
store message information to
contacts
If a message you receive contains a phone
number, Private ID, Talkgroup ID, or an email
address in the From field, the To field, the Cc
field, the Subject field, or the body of the
message, you can store this information to
Contacts.
2 Highlight the number or email address
you want to save.
3 Press / > Save Number or Save Address.
4 To store the number or email address as a
new entry, select [New Contact].
To store the number or email address to
an existing entry, select the entry.
5 With the Contacts type field highlighted,
press the navigation key left or right to
display the Contacts type you want to
assign the number or email address.
6 Press K under Save.
reply to a message
1 View the message you want to reply to.
2 To reply to the sender only, press K
under Reply or press / and select Reply All
to reply to all recipients.
1 View the message.
essentials
23
3 A list of short phrases appears. Select any
of these phrases to add it to your
messages or select [Create Reply].
2 Highlight the website URL you want to go
to.
4 Edit any message fields you want to
change.
Note: The entire URL must appear in the
message to allow you to open the website.
5 Press K under Send.
use auto replies
If the message you are replying to was sent
with auto replies, it contains a numbered list
of possible replies for you to send. Press the
number of the reply you want to send. The
reply is sent immediately without further
action.
3 Press / > Go To Website.
embedded objects and
attachments
If a message contains pictures or audio files in
the body of the message, highlight each
picture or audio recording to view or play it.
go to a website
If a message contains a picture or audio
recording as an attachment, open the
attachment to view the picture or play the
audio recording.
If a message contains one or more website
URLs, you can go to that website.
open attachments
1 View the message.
1 View the message.
24
essentials
2 Highlight the attachment you want to
open. Attachments appear at the end of a
message.
delete an embedded picture or
audio recording
3 Press r.
To delete a picture or audio recording that is
part of the body of a message you receive:
Attachments of an unknown type cannot be
opened, but can be deleted.
1 View the message.
save an embedded picture or
audio recording
To save a picture or audio recording that is
part of the body of a message you receive:
1 View the message.
2 Highlight the picture or audio recording
you want to delete and press /.
3 Select Delete Picture or Delete Audio.
save attachments
1 View the message.
2 Highlight the picture or audio recording
you want to save.
2 Highlight the attachment you want to
save.
3 Press /.
3 Press / > Save Attachment.
4 Select Save Picture or Save Audio.
Selected items save to the default storage
location.
The item will save in the default storage
location.
essentials
25
delete attachments
cancel an unsent message
1 View the message.
1 Highlight the message you want to
cancel.
2 Highlight the attachment you want to
delete.
3 Press / > Delete Attachment.
4 Press K under Yes to confirm.
outbox
The Outbox holds all unsent messages.
2 Press /.
3 Press K under Cancel.
sent items
The Sent Items box holds sent messages.
Find it: Press / > E > Outbox
forward messages from sent
items
resending failed messages
from the outbox
1 Scroll to the message you want to
forward.
1 Scroll to the message you want to resend
or press the number of the message you
want to resend.
2 Press K under Resend.
26
essentials
2 Press / > Forward.
3 Make edits if you wish, select the
recipient and press K under Send.
setting up delivery reports
delete sent messages
While creating a message you can set up read
receipts. Press / > Delivery Report to view the
options.
1 Scroll to the message you want to delete.
option
Off
On
Delivery report will not be
generated.
Delivery report will be generated
when a message is delivered.
2 Press K under Delete.
3 Press K under Yes to confirm.
delete all unlocked sent messages
1 Press / > Delete All.
2 Press K under Yes to confirm.
Note: Delivery reports are
available with MMS only.
check delivery status
If a message was successfully sent and you
set the message to confirm delivery, you can
check the delivery status:
1 Scroll to the message you want to view.
2 Press / > Delivery Status.
essentials
27
customize messaging
Find it: / > E > / > Setup
option
Delivery Rp:
This option is available from many menus.
The following options are available:
option
Signature
Quick Notes
Cleanup
28
Allows you to create a
signature that is automatically
inserted at the end of your
messages. Signatures can be
edited before sending the
message.
Lets you create new Quick
Notes and edit or delete Quick
Notes you created.
Controls how long messages
remain in the Inbox and Sent Items
before being deleted.
essentials
Memory Size
MMS Setup
Allows you to be automatically
notified when your message is
delivered.
Shows a report on used and
free memory in your phone.
Opens a submenu to set MMS
options.
Note: Available with MMS
only.
Text Message Opens a submenu to set text
Setup:
messaging options.
Note: Available with SMS only.
manage memory
Your text Inbox and Sent Items hold 200
messages each. The Outbox, and Drafts
folder hold up to 30 messages each. If they
are full, you cannot receive messages, send
messages, or save drafts until you delete
some items.
Note: Media files and Java applications can
affect the available amount of memory on
your phone. If you run out of memory and
your Inbox, Sent Items, Outbox, and Drafts
folder are empty, delete unwanted media files
and Java applications to free up memory.
MMS setup
Find it: / > E > / > Setup > MMS Setup
The following options become available:
option
Friendly Name
To view the amount of memory available in
your text inbox:
Find it: Press / > E > / > Setup >
Memory Size
Downloads
Allows you to create a friendly
name. Your friendly name is
displayed in the From field on
other iDEN phones when your
message is received.
Downloads: Controls whether
your phone downloads new
messages. Set this option to
Automatic if you want your
phone to download new
messages automatically.
Select Manual if you want your
phone to prompt you before
downloading new messages.
essentials
29
option
Replies
Replies: Lets you create or edit
and delete reply phrases you
created.
text message setup
Find it: / > E > / > Setup > Text Msg setup
The following options become available:
option
Srvc Cntr No
Expire After
Allows you to enter a service
center number.
Allows you to set the number
of days before a message
expires.
new quick notes and reply
phrases
create quick notes or replies
1 From the Setup menu, select Quick Notes, or
select MMS Setup > Replies.
2 Select [New Quicknote], or [New Reply].
3 Enter text from the keypad and press r.
edit quick notes or replies
You can edit only Quick Note phrases you
have created.
1 From the Setup menu, select Quick Notes, or
select MMS Setup > Replies.
2 Select the quick note or reply you want to
edit.
3 Edit the text and press r.
30
essentials
delete quick notes or replies you have
created
1 From the Setup menu, select Quick Notes, or
select MMS Setup > Replies.
Sent Items before they are deleted. You set
the cleanup option for the Inbox and Sent
Items separately.
The clean up option deletes only read,
unlocked messages and sent messages.
2 Scroll to the quick note you want to
delete.
Find it: / > E > / > Setup > Cleanup
3 Press K under Delete.
1 Select Inbox or Sent Items.
4 Press K under Yes to confirm.
2 Choose a clean up option from the
following list:
delete all quick notes or replies you
have created
1 From the Setup menu, select Quick Notes, or
select MMS Setup > Replies.
2 Press / > Delete All.
3 Press K under Yes to confirm.
cleanup options
option
Off
5 Messages
Messages are never
automatically deleted.
If you have more than 5
messages, messages are
deleted in the order they were
received, starting with the
oldest, until 5 are left.
The cleanup option controls how long and
how many messages remain in the Inbox and
essentials
31
option
10 Messages
1 Day
3 Days
F-In F-Out
32
If you have more than 10
messages, messages are
deleted in the order they were
received, starting with the
oldest, until 10 are left.
Messages are deleted if they
are older than 1 day.
Messages are deleted if they
are older than 3 days.
With these options, messages
are deleted when you exit the
message center after setting
the option.
Messages are deleted as
necessary on a FirstIn FirstOut
basis.
essentials
option
Custom
Lets you create a clean-up
option of up to 199 messages
or 99 days for the Inbox and
Sent Items.
3 Press K under Yes to automatically delete
messages now or press K under No to
delete messages later.
delete all messages
Find it: / > E
1 Select Inbox, Drafts, Sent Items, or Outbox.
2 Press / > Delete All.
3 Press K under Yes to confirm.
delete a thread
1 From the Inbox, select a thread.
2 Press / > Delete Thread.
3 Press K under Yes to confirm.
If you are on a call when you receive a
message, your phone may sound a
notification tone during the call or after you
end the call, depending on how you set your
notification options.
message notifications
set notification options
When you receive a message, your phone
notifies you with text on the display, a
notification tone or vibration.
To control whether your phone sounds
message notification tones while you are on a
phone call:
You can access the message or dismiss the
notification.
If you dismiss the notification, the message is
not deleted. It can be accessed through the
message center.
If you are not on a phone call when you
receive a message, your phone sounds a
notification tone every 30 seconds until you
access the message or dismiss the alert.
Find it: / > u > Phone Calls> Notifications
Select from these options:
option
Receive All Tones sound during calls for all
types of messages.
Msg Mail Tones sound during calls for mail
Only
messages; tones for all other
types of messages are held until
you end calls.
essentials
33
option
Delay All
Tones for all types of messages
are held until you end calls.
feature
event
reminder
Note: Delay All is the default
setting.
To set notification options during a call press
/ > Call Setup > Notifications.
datebook
feature
create
datebook
events
see
datebook
event
34
To create a new Datebook
event press / > Datebook >
[New Event].
To see a calendar event
press / > Datebook. Press
the navigation key left or
right to see the day and up
or down to see the events.
essentials
receive
datebook
events via
PTT
When an event reminder
occurs press K under View.
Press K under Back to close
the reminder.
To view the information
while still in the Private call
press r.
The 5 most recent events
received from a Private ID
are stored with that Private
ID on the recent calls list.
To store events to the
Datebook press K under
Save while viewing the event
you want to store.
datebook setup
Find it: / > Datebook > / > Setup
options
Alert Timeout
You can view or change these options:
options
Start View
Daily Begin
Delete After
Time Shift
Sets Datebook to start in day
view, week view, or month
view when you access
Datebook.
Sets the beginning of your day.
This is the earliest time of day
displayed in week view, if you
have a 12-hour day view.
Sets the amount of time
Datebook waits to delete an
event after it occurs.
Lets you shift the times of all
Datebook events. This is
useful if you are traveling to a
different time zone.
Clock
Sets the amount of time a
tone continues to sound when
you receive a Datebook
reminder.
Controls whether the time
and date appear on the home
screen; sets time and date
format; sets year.
using your phone as
a modem
Your phone can be connected to a computer
via USB for use as a modem. For more
specific information on how to setup your
phone for use with your computer please visit
www.motorola.com/support and look under the FAQ
section.
essentials
35
basics
See page 1 for a basic phone diagram.
status indicators
display
Status indicators are shown at the top of the
home screen:
The home screen shows when you turn on
the phone. To dial a number from the home
screen, press number keys and `.
1. 2. 3. 4.
Time
Ready
10:05pm 10/23
5. 6. 7.
Date
Note: Your home screen may look different.
Time
Ready
10:05pm 10/23
Date
Left Soft
Key Label
Left Soft
Key Label
Right Soft
Key Label
Soft key labels show the current soft key
functions. For soft key locations, see page 1.
36
basics
Right Soft
Key Label
1 Signal Strength Indicator: Vertical bars
show the strength of the network
connection. You can’t make or receive
calls when ~ shows.
2 Active Phone Line: $ indicates phone
line 1 is ready to make calls; ( indicates
phone line 2 is ready to make calls.
3 Speaker On/Off: Sounds associated with
Private calls and group calls can be set to
come through the earpiece rather than
through the speaker.
4 Ringer Vibe/Off: Your phone is set to not
ring.
5 Message Indicator: Shows when
you receive a text message.
6 Packet Data: Your phone is ready to
transfer packet data or is transferring
packet data when it shows a blinking
arrow.
7 Battery Charge Indicator: A fuller battery
indicates a greater charge. Recharge the
battery when your phone shows Low Battery.
main menu
All your phone’s features can be accessed
through the main menu. You can set the main
menu to appear as List View or Icon View.
Find it: / > u > Display/Info > Menu View
text entry
Your phone provides convenient ways to enter
words, letters, punctuation, and numbers
whenever you are prompted to enter text (for
example, when adding a Contacts entry or
when using Text Messaging).
change the character input mode
1 When you see a screen where you can
enter text, press / to change the
character input mode.
basics
37
2 Select one of the following options:
entry method
Alpha
Press a key several times for
different characters.
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
Symbols
Enter symbols.
Numeric
Enter numbers by pressing the
numbers on the keypad.
Text Input Selects the desired entry
Settings
languages and Word Prediction
features.
Insert
Selects a item to be inserted,
such a picture, an audio clip or a
voice recording.
Note: available only when using
MMS messaging.
38
basics
Tip: When entering text, press and hold #
to change letter capitalization (Abc > ABC > abc).
word method
The Word text input method lets you enter
text into your phone by pressing keys just
once per letter.
The Word text input method combines the
groups of letters found on each phone key
with a fast-access dictionary of words, and
recognizes what you want to text as you type.
It first offers the most commonly-used word
for the key sequence you enter and lets you
access other choices with one or more
presses of the 0 key or ny pressing the
navigation key up or down. You may also hold
the navigation key down to display a pop-up
list of choices.
enter a word using “word” method
character input
1 Select the Word character input method.
2 Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Bill, press 2 4 5 5).
(If you make a mistake, press * to erase
a single character. Press and hold * to
delete an entire entry.)
3 To accept a word and insert a space,
press #.
To accept a word completion (such as
Billion when you entered Bill), press ;
right.
If you get a word you don’t want, you can
press the 0 key to see more word
choices and pick the one you want.
alpha method
To enter characters by tapping the keypad:
1 Select the Alpha method.
2 Press the corresponding keys repeatedly
until the desired letter appears. (For
example, to enter the word Bill, press 2
twice, 4 three times, 5 three times,
and 5 three times again. If you make a
mistake, press Delete to erase a single
character. Press and hold Delete to erase an
entire word.)
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
Characters scroll in the following order:
characters
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %
£$¥
ABC2ÁÃÂÀÇ
basics
39
characters
DEF3ÉÊÈ
GHI4ÍÌ
JKL5
MNO6ñÓÕÔÒ
PQRS7ß
TUV8ÚÜÛÙ
WXYZ9
+-0*/\[]=><#§
Space / Shift
Back
When entering text, press and hold # to
switch between lowercase and uppercase
letters. The icons in the upper left-hand corner
of the screen show the character type.
40
basics
character type
Q or T Lowercase
R or U Uppercase
S or V Shift Lock
Numerical
Symbols
volume
Press the volume keys up or
down to:
• change the earpiece
volume during calls
• change the ringer
volume from the home screen
Tip: You can quickly set your ringer to
Vibrate All by holding the down volume
key in the home screen.
navigation key
transmitters
Press the navigation key
up, down, left, or right to
scroll to items in the
display. When you
highlight the desired
item, press r to select
it.
Consult airline staff about the use of the
Transmitters Off feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
handsfree speaker
You can use your phone’s handsfree speaker
to make calls without holding the phone to
your ear.
During a call, press K under Spkr to turn the
handsfree speaker On.
The handsfree speaker stays on until you
press K under Spkr again.
Transmitters Off turns off your phone’s calling
and Bluetooth features in situations where
wireless phone use is prohibited, but you can
use the phone’s other non-calling features
when Transmitters is turned Off.
Find it: / > u > Advanced > Transmitters > Off
use GPS with map
software
Your phone can be connected to a PC, laptop,
or PDA via USB for use as a GPS receiver. For
more specific information on how to setup
your phone for use with your computer please
basics
41
visit www.motorola.com/support and look under the
FAQ section.
features for the hearing
impaired
using your phone with a
hearing aid
For best results use the following optimization
procedures and phone setting. They generally
apply as well for users with cochlear implants:
optimize your phone position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
microphone coupling is obtained. You also
may need to adjust your hearing aid (HA)
volume setting.
42
basics
If your HA has a telecoil, activate its switch,
then also rotate the phone as illustrated to
align the telecoils.
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
Approximate telecoil location is just
above the battery.
choose your hearing aid setting
Find it: / > u > Phone Calls > Hearing Aid
1 Set this option to Microphone. Microphone
coupling is now optimized.
or
TTY
feature
turn On TTY
feature
choose TTY
mode
change the
TTY baud
rate
Press / > u >
Phone Calls > TTY > Use TTY > On.
Press / > u >
Phone Calls > TTY > Type.
Select from TTY, VCO or HCO.
Press / > u >
Phone Calls > TTY > Baud.
Select 45.45 or 50.00.
While in the TTY call, press
/ > In Call Setup > TTY > Type.
change TTY
mode
during a call Select from TTY, VCO or HCO.
2 Set this option to Telecoil. Phone meets US
federal requirements for telecoil coupling
sound or set this option to Off (factory
default). This is the setting for non HA
users.
basics
43
security features
feature
phone lock
keypad lock
enable SIM
PIN
change SIM
PIN
To lock the phone press
/ > u > Security >
Phone Lock > Lock Now or
Auto Lock.
To lock the keypad press
/ > u > Security >
Keypad Lock > Lock Now or
Auto Lock.
Shortcut: To lock the
keypad press / > *.
Press / > u > Security >
SIM PIN > On.
Press / > u > Security >
Change Passwords > SIM PIN.
Note: You can make emergency calls on a
locked phone (see page 61).
44
basics
main attractions
media center
The media center lets you access pictures and
audio recordings stored in your phone’s
memory.
The following audio recordings can be
accessed through the media center:
• Voice records
“MMS features” on page 18 and
“Bluetooth®” on page 55.
Pictures in the media center can be sent in
Private calls using Send via PTT. See “PTX
features” on page 46.
Audio files supported by the Media Center
include:
Format
Sampling Rates/Bit Rates
.au
8 KHz/8 kbps
• Audio recordings saved from MMS
messages
.midi
8 KHz
• Audio recordings downloaded to your
phone
.mp3
8 KHz/8 kbps
.wav
8 KHz/64 kbps
.amr
12kbps
• Ringtones
Items in the media center can be sent in
MMS messages and with Bluetooth. See
main attractions
45
Image files supported by the Media Center
include:
Format
Max. Image Size (in pixels)
.png
128 x 160
.gif
128 x 160
.jpg
640 x 480
.wbmp
128 x 160
PTX features
With Push To View features, your phone can
send and receive the following items through
Private calls with other phones that have this
capability:
• Short text messages1
• Pictures1
• Datebook events
• My Info
• Contact information
You can choose to send messages, pictures,
events, My Info or Contacts information to the
Private ID you are engaged in a Private call
with, Private IDs on the Recent Calls list, and
Private IDs stored in Contacts.
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
Note: You cannot send PTT feature items
during Talkgroup calls or SDGC calls.
1. Additional charges may apply.
46
main attractions
send messages
The Push to Send Messages feature
lets you send short text messages through
Private calls.
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with.
begin a message and choose a
recipient
You can begin a message during a Private call,
from the Contacts list, the Recent Calls list, or from
the PT Manager.
begin a message during a Private call
While in a Private call, press / >
Use PTT Feature > Send Message.
are prompted to respond. Press K under Yes
to acknowledge the message.
begin a message from the Contacts or
the Recent Calls list
1 From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
2 Press / > Use PTT Feature > Send Message.
begin a message from the PT Manager
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
Find it: / > N > Send Contact > Browse
Then select Contacts or Recent Calls to see a list of
entries from the Contacts or the Recent Calls list
that can receive messages.
Note: The first time you send a message,
Messaging Fees May Apply Continue? appears and you
main attractions
47
create messages
To view the message, press K under Read.
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
send. Your message may be up to 400
characters long.
To dismiss the message, press K under
Dismiss.
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
2 Press K under Reply.
send a completed message
After you have completed your message,
press the PTT button to send it.
receive messages
When you receive a message, a message
notification appears on the display.
48
main attractions
reply to a message
1 View the message.
3 Create the message and press the PTT
button to send it.
send pictures
You can send pictures stored in the Media
Center through Private calls. The picture you
send appears on the Private call recipient’s
display.
If the recipient accepts the picture, their
phone saves the picture. The picture then
appears in that phone’s recent call list.
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply
Continue? appears and you are prompted to
respond.
5 When prompted, press the PTT button to
resume the Private call.
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
from the media center
Find it: / > Media Center
send a picture during a call
1 Scroll left or right to Media: Pictures.
1 While in a Private call, press K under
Picture or press / > Use PTT Feature >
Send Picture.
2 Select the picture you want to send.
A list of pictures that can be included in a
Private call appears.
2 Select the picture you want to send.
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
start a call by sending a picture
3 Press / > Send Via... > Send Via PTT.
4 Select A Contact or A Recent Call
A list of contacts that have Private IDs and
are able to receive pictures appears.
5 Select the name of the person you want
to send the picture to.
6 Press the PTT button to send the picture.
7 When prompted, press the PTT button to
resume the Private call.
main attractions
49
from the PT manager:
Find it: / > N > Send Picture
1 Select A Contact or A Recent Call
A list of contacts that have Private IDs and
are able to receive pictures appears.
2 Select the name of the person you want
to send the picture to.
3 Select Browse Picture.
4 Press the PTT button to send the picture.
5 Once picture has been sent, when
prompted press the PTT button to resume
the call.
receive a picture
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
50
main attractions
Pictures you receive are saved to your phone’s
memory. They are accessible through the
media center.
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
clear a picture from the display
If you want to clear a picture from your
phone’s display while still on a call, press
/ > Clear Screen.
send a datebook event
To send a datebook event during a
private call:
1 While in a Private call press / >
Use PTT Feature > Send Event.
Note: If these options do not appear on
the menu, the Private ID you are engaged
in a private call with is not able to receive
Datebook events.
or Memo, and press r. Push the PTT
button to send.
2 If you want to create a new datebook
event, press K under New and create the
event in your datebook. If you want to
chose an existing event do so.
set my info sending option
You can control what portion of the
information in My Info is sent and whether it is
sent automatically in every call or only when
you choose to send it.
3 If the event is a recurring event: Select
This Event Only to send only the event
selected. Select Repeat Events to send all
occurrences of the event.
Find it: / > PT Manager > Configure > PTT My Info >
Info to Send
4 Push the PTT button to send the event.
1 Select or remove the fields you want to
send.
send my info
2 Press K under Done.
• While in a Private Call press / >
Send via PTT > Send My Info, and push the
PTT button to send.
• From the home screen press / >
My Info > / > Send via PTT. Enter a Private
ID or press K under Browse to chose a
recipient from Contacts, Recent Calls
The information your phone sends always
includes My Name, and Private. You may also
send Line 1, Line 2, and Carrier IP, depending on
your sending options.
main attractions
51
automatic sending
To control whether you send your information
automatically:
Find it: / > PT Manager > Configure > PTT My Info >
Auto Send
1 Select On or Off
2 Select Send Contact and select the contact
information you want to send.
3 Push the PTT button to send.
send contact from home screen
1 From the home screen press / >
PT Manager > Send Contact.
2 When you make a call in which your
information is sent automatically, the
name you entered in the My Name field of
My Info appears on the display of the
recipient’s phone, even if your name and
Private ID are not stored in the recipient’s
Contacts.
2 Enter the Private ID number of the person
you want to send the Contact information
to or press K under Browse.
send contact information
turn PTT features on and off
send contact during private call
1 While in a Private Call press / >
Use PTT Feature.
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
52
main attractions
3 Select from Recent Calls, Contacts, or Memo.
4 Select the contact information you want
to send and push the PTT button.
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
option
Last Call
Find it: / > u > 2-Way Radio> On/Off PTT
1 Check or uncheck Messages, Pictures or
Events.
Assigned No.
one touch PTT
Find it: / > u > 2-Way Radio > One Touch PTT
One Touch PTT sets your phone to do any of
the following each time you press the PTT
button from the home screen:
option
Off
Quick PTT
Nothing happens when you
press the PTT button from the
home screen.
Go to Quick PTT. See “quick
PTT” on page 54.
PT Manager
Send
Message:
Send Picture:
Call the most recent Private ID
or Group on the recent calls
list.
Call a Private ID you assign.
Enter the number using your
keypad, or press K under
Search. Select Contacts, Recent Calls,
or Memo.
Note: If you are entering a
Talkgroup number, enter #
before the number.
Go to PT Manager. See “PT
manager” on page 54.
Go to the first screen to send a
message.
Go to the first screen to send
pictures. See “send pictures”
on page 48.
main attractions
53
option
Send Event
Send My Info
Send Contact
To make a Private call or SDG call:
Go to the first screen to send a
Datebook event.
Go to the first screen to send
My Info. See “send my info”
on page 51.
Go to the first screen to send a
contact. See “send contact
information” on page 52.
quick PTT
Quick PTT lets you quickly make a call,
create an SDG list or make an SDG call when
accessing any Private IDs on your phone.
To view a list of Contacts and SDG lists with
Private IDs in Contacts:
Find it: / > Quick PTT
To move between Contacts, Recent Calls, or Memo,
press the navigation key left or right.
54
main attractions
1 Select the entries you want.
2 Press K under Done.
3 Push the PTT button.
To save your selections as an SDG list press
/ > Save SDG. For more information about
SDG lists, see “selective dynamic group
(SDG) calls” on page 63.
If you want to assign a name to the SDG list,
enter the name.
Note: If you do not assign a name, the SDG
list is named SDG followed by the number of
members in the SDG list. For example, SDG
(8) for an SDG list with 8 members.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
Find it: / > PT Manager
1 Select On to power Bluetooth On.
• Select Quick PTT, Send Message, Send Picture,
Send Event, Send My Info, Send Contact, or
Configure. After choosing what PTT item
you are sending, select a contact and
press the PTT button to send.
2 Select Name if you wish to assign a name
to your phone.
• Select Configure to configure your PTT Quick
Notes, PTT My Info, One Touch PTT, or On/Off PTT.
You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
Bluetooth®
Note: Bluetooth supported on i296 only.
Find it: / > c
turn Bluetooth on or off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
Find it: / > c > Setup > Power
3 Select Find Me Time to determine the
amount of time in which your phone can
be found by other Bluetooth devices.
make a Bluetooth connection
connect your phone with a Bluetooth
headset
Find it: / > c > Hands Free
1 Follow the instructions on your Bluetooth
headset to set it up to be found.
2 Once your Bluetooth headset is set to be
found, select [Find Devices]. Your phone will
scan for all Bluetooth devices in range.
main attractions
55
Select your Bluetooth headset from the
list of devices and press r.
3 Your phone requires that you pair it with
the Bluetooth headset in order to create a
connection. Press K under Yes when you
are prompted to pair with the headset.
4 Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device.
This phone offers the Bluetooth auto pair
feature with auto pair compatible
Motorola devices. When paired via
Bluetooth with a certain device, the PIN
will not be required.
5 Press K under Ok.
56
main attractions
Note: Once your phone and headset have
been paired, it will be stored on your phone
and you will not need to pair them again
unless the device is removed from memory.
connect your phone with another
Bluetooth device
Find it: / > c > Link To Devices
1 Select the device you want from the list of
found devices on your screen.
2 Create a bond if you are prompted to do
so.
If you have previously connected to a device,
the device will be stored on your phone so
you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
1 While in a call, press / > Use Bluetooth.
2 Select the audio device you want to
connect to from the list of Hands Free Devices.
If the Audio Devices list contains only one device,
your phone will try to connect to it.
send information via Bluetooth
Your phone can transfer Contacts entries,
Datebook events, audio files, and pictures to
another Bluetooth device.
2 Press / > Send Via... > Bluetooth.
3 Select the device you want to transfer the
contact information to, or search for the
device by selecting [Find Devices].
4 If prompted, bond with the device.
Your phone connects with the devices and
transfers the information.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect.
Note: Files sent or received may be up
to 1 MB, depending on your service
provider.
sending information
1 From within Contacts, datebook, or Media
Center, select the Contacts entry,
Datebook event, audio file or picture you
want to send.
main attractions
57
call features
turn off a call alert
You can press the volume keys to turn off a
call alert before answering the call.
recent calls
The recent calls list contains information
associated with calls you have made and
received and call alerts you have received.
When you send or receive Private calls, the
recent call list contains the following PTX
items with those calls:
• contact information received
• My Info received
• short text messages received
58
call features
• pictures sent or received
• Datebook events received
The recent calls list displays up to 20 of the
most recent calls and call alerts.
1 Press / > Recent Calls.
2 Scroll through the list.
3 To view more details of the item
press r.
store an item to contacts from
recent calls
Phone calls, Private calls, My Info, Contacts or
Location entries received from other phones
can be stored to the Contacts list from the
Recent Calls list.
Find it: / > Recent Calls
1 Scroll to or select the item you want to
store.
2 Press K under Save to store the
information as a new entry in the
Contacts list.
or
3 Select an existing contact and update the
information.
4 Press K under Done to save your changes.
redial
To redial your last outgoing call, press and
hold ` or push the PTT button if it was a
private call.
caller ID
Caller ID allows people to identify a caller
before answering the phone by displaying the
number of the incoming call.
To block your phone number from being
displayed for a specific outgoing call:
1 Press * 6 7.
2 Enter the number you want to call.
3 Press `.
To permanently block your number, call your
customer service provider.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
different numbers depending on the reason
call features
59
you missed the call. You can forward phone
lines 1 and 2 independently.
voice names
Find it: / > Call Forward
You can place calls by speaking commands to
your phone if you have previously assigned a
voice name to your contacts.
1 To forward all calls select All Calls and select
To to enter the phone number you want all
your calls forwarded to.
or
2 You can specify a forwarding number for
each type of missed call by selecting
Detailed and choosing the following options:
If Busy: When your phone is on a call or
transferring data.
If No Answer: When you do not answer on
the first 4 rings.
If Unreachable: When your phone is out of
coverage or powered off.
assign voice names to contacts
1 Press K under Contcs and select
[New Contact].
2 Assign a name, phone number and select
[Options].
3 Select Voice Name and follow the prompt to
record the voice name.
4 Press K under Back and K under Save.
place a call using a voice name
1 Press the speaker key ) until you are
prompted to say the voice name.
The phone will automatically place the call.
60
call features
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances. Emergency calls
can be made without a SIM card, when your
phone is locked, or when the SIM card is
blocked.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your location, to the
best of your knowledge, to the emergency
response center when you make an
emergency call.
Note: Emergency calls cannot be placed
while the keypad is locked, or if your phone is
displaying a No Service message on the screen.
To unlock the keypad, press / > *.
international calls
If your phone service includes international
dialing, press and hold 0 to insert your local
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
call features
61
speed dial
voice mail
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
To receive voice mail messages, you must
first contact your service provider to set up a
voice mail account.
1 From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
receiving a message
2 Press #.
When you receive a voice mail message, New
VoiceMail Message appears on the display.
3 Press `.
To call your service provider’s voice mail
system and listen to the message:
turbo dial
1 Press K under Call.
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
2 To dismiss the message notification:
62
call features
• Press r or Back.
If the caller leaves a message, 3 appears on
the display.
selective dynamic
group (SDG) calls
An SDG call is similar to a Private call, but is
made to all members of an SDG list at once.
An SDG list is a group of Private IDs that you
create. An SDG list must contain at least 2
members and can contain up to 20 members.
You can create an SDG list for one call only or
store it to Contacts so you can call it any time.
Note: In order to store SDG lists on your
phone, you you will need an SDG-capable SIM
card. For more information about
SDG-capable SIM cards, contact your service
provider. SDG lists created with your phone
are not readable by an older iDEN SIM-based
phone.
You can use Send via PTT to send SDG
lists to other phones that have this
capability.
create SDG lists in contacts
Find it: / > L
1 Select [New SDG List].
2 If you want to assign a name to the SDG
list, enter the name.
If you do not assign a name, the SDG list
is named “SDG” followed by the number
of members in the SDG list. For example,
“SDG (8)” for an SDG list with 8
members.
3 Add Private IDs. See “Add Private
Numbers” below.
4 Press K under Save.
add private numbers
You can add Private IDs to an SDG list by
selecting them from Contacts, the recent
calls list, or memo. You can add all members
in an existing SDG list by selecting the list.
call features
63
You can select more than one member from
Contacts and the recent calls list. A
checkmark appears next to each selected
item.
remove members or SDG lists
add members from contacts,
the recent calls list, or memo
2 Press K under Edit.
1 While creating an SDG list, select [Add
Member] or select [Add Number] and press K
under Browse.
remove a member from an SDG list
1 From Contacts, scroll to the SDG list you
want to delete the member from.
3 Scroll to the member you want to remove.
4 Press / > Remove Member.
5 Press K under Save.
2 Scroll to the members you want from
Contacts, the recent calls list, or Memo,
and press r. A checkmark appears next
to each selected member.
remove all members from an SDG list
1 From Contacts, scroll to the SDG list you
want to delete the member from.
If you chose [Add Number] in step one, you can
enter a Private ID number from the keypad.
3 Press / > Remove All.
3 Press K under Done.
2 Press K under Edit.
4 Press K under Yes to confirm.
delete an SDG list from Contacts
1 Scroll to the SDG list you want to delete.
64
call features
2 Press / > Delete SDG List.
not want to save the SDG list, press K
under Done.
make SDG calls
4 Push the PTT button to make the call.
1 From Contacts or the recent calls list,
scroll to or select the SDG list you want.
SDG call information
2 Push the PTT button.
start an SDG call with a
private ID
1 From the home screen, enter the Private
ID, or from the Contacts list or the recent
Calls List, scroll to an entry containing the
Private ID.
2 Press / > Call SDG.
3 Add more Private IDs. See “add private
numbers” on page 63.
If you want to save the SDG list you have
created press / > Save SDG, or if you do
While you are in an SDG call, the following
appears on the screen:
• The name of the SDG list
• The name or the Private ID of the
person speaking
• The number of participants in the SDG
call
SDG Call Details
During an SDG call, you can view details
about the other SDG list members, such as
their name or Private ID, and their status on
the call. To view SDG call details, press K
under Details.
call features
65
In the SDG Call Details view, these icons
appear next to member names or Private IDs:
F The member of the SDG list who is
speaking.
E A member of the SDG list who is active
on the SDG call, but not speaking.
D A member of the SDG list who has
exited the call.
H A member of the SDG list who could not
be reached on the SDG call.
G A member of the SDG list whose status
is unknown.
66
call features
MOTOtalkTM
Note: This feature may not be offered by your
service provider.
With MOTOtalk, you can make and receive
Two-Way Radio calls without network
coverage. If you are travelling outside your
service provider's coverage area, receiving a
poor signal, or otherwise want to temporarily
avoid using your service provider's network,
you can switch to MOTOtalk and talk with
anyone on your code and channel who is
within range.
Note: Range will vary based on terrain,
man-made structures and atmospheric
conditions.
MOTOtalk lets you:
• Use code or private mode operation
• Use up to 10 channels
• Communicate with standalone
MOTOtalk radios
Note: You cannot use MOTOtalk with older
Family Radio Services products.
The following features and main menu items
are unavailable while in MOTOtalk:
• On-network phone or Private calls
• Data transmission
• Incoming message notification
• Datebook
• Call forwarding
• Call Timers
• Call alerts
MOTOtalkTM
67
switch to MOTOtalk
Switching to Network Please Wait displays. After a few
seconds, the network home screen appears.
To set your phone to MOTOtalk:
1 From the home screen press / >
MOTOtalk and press r.
2 Select Go to MOTOtalk.
Switching to MOTOtalk Please Wait displays.
After a few seconds, the MOTOtalk home
screen displays. When MT Ready displays,
you can begin using MOTOtalk.
While in MOTOtalk, this icon 4 displays.
exit MOTOtalk
To switch to network mode:
1 From the MOTOtalk home screen, press
/ > MT Options and press r.
2 Select Exit MOTOtalk.
68
MOTOtalkTM
talk range
While in MOTOtalk mode, phones should be a
minimum of 6 feet apart to maximize
performance and improve transmission range.
channels and codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies.
Other parties may be talking on the same
channel. Codes minimize interference from
other parties when you are sharing the same
channel.
MOTOtalk opens to the last code and channel
used on your phone. You can view the code
and channel your phone is currently set to on
the MOTOtalk home screen.
For code calls, all parties must be on the
same channel and code. For private MOTOtalk
calls, the person you are calling must be in
MOTOtalk and on the same channel to
receive your call.
Note: When making a code call, all parties
that are on your code and channel can hear
your conversation.
setting channels and codes
To set a code:
1 From the MOTOtalk home screen, press
K under Edit.
2 Scroll to Code.
3 Press K under Edit.
4 Select a code.
5 When you are finished, press K under
Back to return to the MOTOtalk home
screen.
To set a channel:
1 From the MOTOtalk home screen, press
K under Edit.
making code calls
2 Scroll to Channel.
1 From the MOTOtalk home screen or the
channel and code edit screen, press and
hold the PTT button. Transmit appears on
the first line of display. Begin speaking
after your phone emits the MOTOtalk
tone.
3 Press K under Edit.
4 Select a channel.
5 When you are finished, press K under
Back to return to the MOTOtalk home
screen.
To make a code call:
MOTOtalkTM
69
Note: The MOTOtalk tone consists of 4 rapid
beeps.
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
phone that is set to the same channel,
regardless of the code (1-15). When you
receive transmissions with the code set to
Receive All, the code that the transmission was
received on will replace Receive All on the
display.
Note: You cannot initiate a code call when the
code is set to Receive All.
receiving code calls
To set the code to Receive All:
When you receive a code call, Receive will
appear on the display. After hearing the
MOTOtalk tone, you have 6 seconds to reply
before the call times out.
1 From the MOTOtalk home screen, press
K under Edit.
To reply to the call, press the PTT button.
Note: An incoming MOTOtalk call can be
terminated at any time by pressing @.
receiving all MOTOtalk calls
If you set the code to Receive All, your phone
can receive MOTOtalk transmissions from any
70
MOTOtalkTM
2 Scroll to Code.
3 Press K under Edit.
4 Select Receive All.
5 When you are finished, press K under
Back to return to the MOTOtalk home
screen.
To reply to a call with the code set to Receive All:
• Press the PTT button.
private MOTOtalk calls
If you want to have a private conversation
without other parties listening in, you can
make a private MOTOtalk call. The person you
are calling must be in MOTOtalk and set to
the same channel to receive your call.
private only
To set MOTOtalk to ignore code calls, so that
you only make or receive private MOTOtalk
calls, set your code to Pvt Only.
To set the code to Pvt Only:
1 From the MOTOtalk home screen, press
K under Edit.
2 Scroll to Code.
3 Press K under Edit.
4 Select Pvt Only.
5 When you are finished, press K under
Back to return to the MOTOtalk home
screen.
making a private MOTOtalk call
1 Enter the PTN of the person you want to
call on your channel. If the PTN is more
than 10-digits, enter the last 10-digits of
the PTN, or scroll to a number or name in
Contacts or the Recent Calls List.
2 Press and hold the PTT button. Begin
speaking after your phone emits the
MOTOtalk tone.
3 Release the PTT button to listen.
The number or name of the person you
are calling will appear in the display.
If you receive an error message:
• The PTN you entered is invalid.
MOTOtalkTM
71
• The person that you are trying to reach
is in network mode.
• The person that you are trying to reach
is set to a different channel.
• The person that you are trying to reach
is out of range.
receiving a private MOTOtalk
call
The number or name of the person who is
calling will appear in the display.
To reply, press the PTT button.
ending code calls and private
MOTOtalk calls
Code calls and private MOTOtalk calls will end
automatically after 6 seconds of inactivity.
The MOTOtalk home screen will display.
72
MOTOtalkTM
Note: A private or code MOTOtalk call can be
interrupted during the 6 second idle time by
another code call or private call.
making emergency calls
while in MOTOtalkTM
mode
If you attempt to make an Emergency 911 call
while in MOTOtalk mode, your phone will
automatically exit MOTOtalk mode and
attempt to find a network signal.
If you are out of network coverage your phone
will not be able to make an emergency 911
cellular call until you go back into the network
coverage area.
You must wait until the phone reconnects to
the network before attempting to make an
emergency 911 cellular call.
setup options
You can set up MOTOtalk options on the MT
Options screen. You can access this screen in
both network and MOTOtalk modes.
1 From the Setup screen, scroll to Direct
Launch and press r.
2 Select On.
2 Select Setup.
Note: If Direct Launch is set to On, the MOTOtalk
setup options will be unavailable from the
main menu. However, you can still access
setup options while in MOTOtalk by pressing
/ and selecting > MT Options > Setup.
You can set the following MOTOtalk options:
To turn off Direct Launch:
To access setup options:
1 Press / > MOTOtalk or MT Options.
• Direct Launch: Launch directly into
MOTOtalk when you select MOTOtalk
from the main menu.
• State Tone: Have an alert sound notify you
that you have used MOTOtalk for a
specified interval.
using direct launch
To set your phone to launch MOTOtalk when
you select MOTOtalk from the main menu:
1 From the Setup screen, scroll to Direct
Launch and press r.
2 Select Off.
MT Options will now display when you select
MOTOtalk from the main menu.
using state tone
To set your phone to alert you after you have
used MOTOtalk for a specified interval:
MOTOtalkTM
73
1 From the Setup screen, scroll to State Tone
and press r.
2 Select the interval after which you want
the tone to sound.
For example, if you select 1 hour, you will be
notified every hour that you are in MOTOtalk.
To turn off State Tone:
1 From the Setup screen, scroll to State Tone
and press r.
2 Select Off.
74
MOTOtalkTM
customize
ring tones
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
4 When you are finished, press K under
Done.
Note: This icon , appears on the display if
you set your phone to Silent. This icon 5
appears on the display if you set the phone to
Vibrate All.
Find it: / > Ring Tones
1 Make sure Vibrate All is set to Off.
set your phone to vibrate
2 Scroll through the list of ring tones and
select the one you want to assign.
Vibrate sets your phone to vibrate instead
of making a sound. Silent sets your phone
to neither vibrate nor make a sound.
You can set your phone to vibrate for all calls
and alerts.
3 Select the features you want to assign the
ring tone to.
Find it: / > Ring Tones > Vibrate All
Set this option to On or Locked.
Setting this option to On lets you turn Vibrate All
off by pressing the up volume control. Setting
this option to Locked requires you to press and
hold the up volume control to turn Vibrate All off.
customize
75
The Locked option helps prevent you from
accidentally turning Vibrate All off.
backlight
To set Vibrate All to On or Locked using the volume
controls:
Set the amount of time that the display and
java apps. backlights remain on, or turn off the
backlight feature to extend battery life.
Press the volume controls to turn down the
volume as far as possible to set Vibrate All to On.
Continue to hold the down volume control to
set Vibrate All to Locked.
Find it: / > u > Display/Info > Backlight
To set your phone to vibrate instead of making
a sound for some features but not others:
Set a previously saved photo or picture as a
wallpaper (background) image on your phone’s
display screen or throughout all menu
screens.
Find it: / > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Select Vibrate from the list of ring tones.
3 Select the features you want to set to
make no sound.
4 When you are finished, press K under
Done.
76
customize
wallpaper
Find it: / > u > Display/Info > Wallpaper
1 Select Wallpaper.
2 Scroll through the list of pictures and
press r to select a picture.
You can set the wallpapers to change
automatically after a certain period of time by
turning on the Auto Cycle feature located in the
Wallpaper menu. You can select from 5 minutes,
15 minutes, 1 hour, 8 hours, Daily, or Startup.
hide or show
location
set your privacy options
Find it: / > GPS > Privacy
Select from the following options:
option
Restricted
Your phone has a location feature for use in
connection with location-based services that
may be available in the future.
Turning Location On will allow the network to
detect your position using GPS technology,
making some applications and services easier
to use. Turning Location off will disable the
GPS location function for all purposes except
911, but will not hide your general location
based on the cell site serving your call. No
application or service may use your location
without your request or permission. GPSenhanced 911 is not available in all areas.
Unrestricted
No Java or similar software
applications may view the
location of your phone.
However, location information
may still be available to the
phone’s owner, fleet manager,
or account administrator.
All applications may view the
location of your phone,
without notifying you.
customize
77
option
Ask Access
When an application attempts
to view the location of your
phone, you will be prompted
to give permission. However,
location information may still
be available to the phone’s
owner, fleet manager, or
account administrator.
change GPS PIN
When you receive your phone, your GPS PIN
is 0000.
To change your GPS PIN press / > u >
Security > Change Passwords > GPS PIN. Enter the
current GPS PIN and enter the new
four-to-eight digit GPS PIN. Re-enter the new
four- to eight-digit GPS PIN to confirm.
78
customize
Legal and Safety
Safety and General Information
This section contains important information on the safe and
efficient operation of your mobile device. Read this
information before using your integrated multi-service
portable radio.*
Exposure to Radio Frequency (RF) Energy
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your phone, the system handling your call controls the power
level at which your phone transmits.
Your mobile device is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
Portable Radio Product Operation and EME
Exposure
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
• United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
• American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
• Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
• ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) “Regulation of the limitation of exposure to
* The information provided in this document supersedes the general
safety information in user’s guides published prior to May 1, 2006
Legal and Safety
79
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz.”
“Attachment to Resolution 303 from July 2, 2002."
Operational Precautions
For optimal mobile device performance, and to be sure that human
exposure to RF energy does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions.
Phone Operation
When placing or receiving a phone call, hold your mobile phone as
you would a landline telephone. Speak directly into the
microphone.
Two-way radio operation
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
80
Legal and Safety
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips.
If you wear the mobile device on your body,
always place the mobile device in a Motorola approved clip,
holder, holster, case or body harness. If you do not use a body-worn
accessory supplied or approved by Motorola and are not using the
mobile device in the intended use positions along side the head in
the phone mode or in front of the face in the two-way radio mode,
or if you hang your device from a lanyard around your neck, keep
the device at least 2.5 centimeters (1 inch) from your body when
transmitting.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/phoneaccessories.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your mobile device may cause interference with
other devices.
Follow Instructions to Avoid Interference
Problems
your mobile device with your implantable medical device, consult
your health care provider.
Turn OFF your mobile device in any location where posted notices
instruct you to do so.
In an aircraft, turn off your mobile device whenever instructed to
do so by airline staff. If your mobile device offers an airplane mode
or similar feature, consult airline staff about using it in flight.
Hearing Aids
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this mobile
device.
Persons with implantable medical devices should observe the
following precautions:
• ALWAYS keep the mobile device more than 20
centimeters (8 inches) from the implantable medical
device when the phone is turned ON.
• DO NOT carry the mobile device in the breast pocket;
• Use the ear opposite the implantable medical device to
minimize the potential for interference.
• Turn OFF the mobile device immediately if you have any
reason to suspect that interference is taking place.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
Other Medical Devices and Health Care Facilities
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Caring for the Environment by
Recycling
This symbol on a Motorola product means the
product should not be disposed of with household
waste.
Disposal of your Mobile Device and Accessories
Please do not dispose of mobile devices or electrical accessories
(such as chargers, headsets, or batteries) with your household
waste. These items should be disposed of in accordance with the
national collection and recycling schemes operated by your local or
Legal and Safety
81
regional authority. Alternatively, you may return unwanted mobile
devices and electrical accessories to any Motorola Approved
Service Center in your region. Details of Motorola approved
national recycling schemes, and further information on Motorola
recycling activities can be found at: www.motorola.com/recycling
Potentially Explosive Atmospheres
Product packaging and user’s guides should only be disposed of in
accordance with national collection and recycling requirements.
Please contact your regional authorities for more details.
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Driving Precautions
Symbol Key
Disposal of your Mobile Device Packaging and
User’s Guide
The use of wireless phones while driving may cause distraction.
Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Responsible driving practices can be found in the “Smart Practices
While Driving” section (see page 95).
Operational Warnings
Obey all posted signs when using Mobile devices in public areas.
82
Legal and Safety
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Symbol
032374o
032376o
Definition
Important safety information
follows.
Do not dispose of your battery
or phone in a fire.
Symbol
032375o
Definition
Your battery or phone may
require recycling in
accordance with local laws.
Contact your local regulatory
authorities for more
information.
Do not throw your battery or
phone in the trash.
Li Ion BATT
032378o
Your phone contains an
internal lithium ion battery.
Do not let your battery,
charger, or phone get wet.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Batteries and Chargers
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Keep Your Mobile Device and Its Accessories
Away from Small Children
These products are not toys and may be hazardous to small
children. For example:
• A choking hazard may exist for small, detachable parts.
• Improper use could result in loud sounds, possibly causing
hearing injury.
• Improperly handled batteries could overheat and cause a
burn.
Glass Parts
Some parts of your mobile device may be made of glass. This glass
could break if the product is dropped on a hard surface or receives
a substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your mobile device until the glass is replaced
by a qualified service center.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your mobile device.
Legal and Safety
83
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Caution About High Volume Usage
Warning: Warning: Exposure to loud noise from any
source for extended periods of time may affect your
hearing. The louder the volume sound level, the
less time is required before your hearing could be
affected. To protect your hearing:
• Limit the amount of time you use headsets or headphones
at high volume.
• Avoid turning up the volume to block out noisy
surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
If you experience hearing discomfort, including the sensation of
pressure or fullness in your ears, ringing in your ears, or muffled
speech, you should stop listening to the device through your
headset or headphones and have your hearing checked.
For more information about hearing, see our Web site at
www.motorola.com/hearingsafety (in English only).
84
Legal and Safety
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Service and Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/support, where you can select from
a number of customer care options. You can also contact the
Motorola Customer Support Center at 1 (800) 453-0920 (United
States), 1 (877) 483-2840 (TTY, TDD United States for hearing
impaired).
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Battery Use and Safety
• In very limited circumstances, such as where your phone
has been exposed to extreme heat Cool Down message
screens will appear. To avoid possible damage to your
battery and phone, you should follow these instructions
until the phone is within its recommended temperature
range. When your phone is in Cool Down mode, only
emergency calls may be made.
• Motorola recommends you always use
Motorola-branded batteries and chargers. The
warranty does not cover damage caused by non-Motorola
batteries and/or chargers.
Caution: Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
Improper battery use, or use of a damaged battery, may
result in a fire, explosion, or other hazard.
• Battery usage by children should be supervised.
• Important: Motorola mobile devices are designed to work
best with qualified batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the
following steps:
• Remove the battery and inspect it to confirm it bears a
Motorola “Original Equipment” hologram;
• If there is no hologram, the battery is not a qualified
battery;
• If there is a hologram, replace the battery and retry
charging it;
• If the message remains, contact a Motorola Authorized
Service Center.
• When storing your battery, keep it in a cool, dry place.
• It is normal over time for battery life to decrease, and for
the battery to exhibit shorter runtime between charges or
require more frequent or longer charging times.
Important: Handle and store batteries properly to avoid
injury or damage. Most battery issues arise from improper
handling of batteries, and particularly from the continued use of
damaged batteries.
DON’Ts
• Don’t disassemble, crush, puncture, shred, or
otherwise attempt to change the form of your
battery.
• Don’t let the phone or battery come in contact with
water. Water can get into the phone’s circuits, leading to
corrosion. If the phone and/or battery get wet, have them
checked by your carrier or contact Motorola, even if they
appear to be working properly.
• Don’t allow the battery to touch metal objects. If
metal objects, such as jewelry, stay in prolonged contact
with the battery contact points, the battery could become
very hot.
Legal and Safety
85
• Don’t place your battery near a heat source.
Excessive heat can damage the phone or the battery. High
temperatures can cause the battery to swell, leak, or
malfunction. Therefore:
• Do not dry a wet or damp battery with an appliance or
heat source, such as a hair dryer or microwave oven.
• Avoid leaving your phone in your car in high temperatures.
DOs
• Do avoid dropping the battery or phone. Dropping
these items, especially on a hard surface, can potentially
cause damage.
• Do contact your service provider or Motorola if your
phone or battery has been damaged from dropping
or high temperatures.
Important: Use Motorola Original products for quality
assurance and safeguards. To aid consumers in identifying
authentic Motorola batteries from non-original or counterfeit
batteries (that may not have adequate safety protection), Motorola
provides holograms on its batteries. Consumers should confirm
that any battery they purchase has a “Motorola Original”
hologram.
Motorola recommends you always use Motorola-branded
batteries and chargers. Motorola mobile devices are designed
to work with Motorola batteries. If you see a message on your
display such as Invalid Battery or Unable to Charge, take the following
steps:
86
Legal and Safety
• Remove the battery and inspect it to confirm that it has a
“Motorola Original” hologram;
• If there is no hologram, the battery is not a Motorola
battery;
• If there is a hologram, replace the battery and retry
charging it;
• If the message remains, contact a Motorola authorized
service center.
Important: Motorola’s warranty does not cover damage to the
phone caused by non-Motorola batteries and/or chargers.
Warning: Use of a non-Motorola battery or charger may present a
risk of fire, explosion, leakage, or other hazard.
Proper and safe battery disposal and recycling: Proper
battery disposal is not only important for safety, it benefits the
environment. Consumers may recycle their used batteries in many
retail or service provider locations. Additional information on
proper disposal and recycling may be found on the Web:
• www.motorola.com/recycling
• www.rbrc.org/call2recycle/ (in English only)
Disposal: Promptly dispose of used batteries in accordance with
local regulations. Contact your local recycling center or national
recycling organizations for more information on how to dispose of
batteries.
Warning: Never dispose of batteries in a fire because they may
explode.
Battery Charging
Notes for charging your phone’s battery:
• When charging your battery, keep it near room
temperature. Never expose batteries to temperatures
below 0°C (32°F) or above 45°C (113°F) when charging.
• New batteries are not fully charged.
• New batteries or batteries stored for a long time may take
more time to charge.
• Motorola batteries and charging systems have circuitry
that protects the battery from damage from overcharging.
Specific Absorption Rate
Your model wireless phone meets the governmental
requirements for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured to not exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian
regulatory authorities. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed for the
safety of all persons, regardless of age or health, and to account
for any variations in measurements.
The exposure standard for mobile devices employs a unit of
measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC and by the Canadian regulatory
authorities is 1.6 watts per kilogram (W/kg), averaged over one
gram of tissue. Tests for SAR are conducted using procedures
accepted by the FCC and by Industry Canada with the mobile
device transmitting at its highest certified power level in all tested
frequencies. Although the SAR is determined at the highest
certified power level, the actual SAR level of the mobile device
while operating can be below the maximum value. This is because
the mobile device is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station, the lower
the power output.
Before a mobile device is available for sale to the public in the U.S.
and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each
government for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body)
submitted to the FCC and available for review by Industry Canada.
The highest SAR value for this mobile device when tested for use
at the ear is 1.43 W/kg, and when worn on the body, as described
in this guide, is 1.09 W/kg. Body-worn measurements can differ,
depending upon available accessories and regulatory
requirements. The SAR information includes the Motorola testing
Legal and Safety
87
protocol, assessment procedure, and measurement uncertainty
range for this product.
While there may be differences between the SAR levels of various
mobile devices and at various positions, they meet the
governmental requirements for safe exposure. Please note that
improvements to this product model could cause differences in the
SAR value for later products; in all cases, products are designed to
be within the guidelines.
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) Web site:
http://www.phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA)
Web site:
http://www.cwta.ca
AGPS and Emergency Calls
When you make an emergency call, your mobile device can use
Assisted Global Positioning System (AGPS) satellite signals to tell
the emergency response center your approximate location.
The AGPS feature has limitations, so always tell the emergency
response center your best knowledge of your location. Remain on
the phone for as long as the emergency response center instructs
you.
88
Legal and Safety
AGPS might not work for emergency calls, if your local
emergency response center does not process AGPS location
information. For details, contact your local authorities.
If your mobile device cannot find strong AGPS satellite signals, the
location of the nearest cell tower in contact with your mobile
device is automatically provided to the emergency response
center.
AGPS Performance Tips
• Go outside and away from underground locations, covered
vehicles, structures with metal or concrete roofs, tall
buildings, and foliage. Indoor performance might improve
if you move closer to windows, but some window sun
shielding films can block satellite signals.
• Move away from radios, entertainment equipment, and
other electronic devices that might interfere with or block
AGPS satellite signals.
AGPS uses satellites controlled by the U.S. government and
subject to changes implemented in accordance with the
Department of Defense AGPS user policy and the Federal Radio
Navigation Plan. These changes might affect AGPS performance.
Limited Warranty Motorola
Communications Products
(International)
What Does this Warranty Cover?
MOTOROLA warrants the MOTOROLA manufactured iDEN
Communication Products listed below (“Product”) against defects
in material and workmanship under normal use and service for a
period of time from the date of purchase as scheduled below:
Products Covered
Length of Coverage
iDEN Subscriber
Digital Mobile and
Portable Units
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Product Accessories
(manufactured by or
under license from
MOTOROLA).
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Batteries.
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Rechargeable Batteries will be replaced during the applicable
warranty period if:
• the battery capacity falls below 80% of rated capacity, or
• the battery develops leakage.
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty
period. All replaced parts of Product shall become the property of
MOTOROLA.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for
the Product manufactured by MOTOROLA. MOTOROLA assumes
no obligations or liability for additions or modifications to this
warranty unless made in writing and signed by an officer of
MOTOROLA. Unless made in a separate agreement between
MOTOROLA and the original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment if expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
Legal and Safety
89
coverage, or operation of the system as a whole, or any portion of
the system not produced by MOTOROLA, under this warranty.
General Provisions:
This warranty sets forth the full extent of MOTOROLA’S
responsibilities regarding the Product, Repair, replacement or
refund of the purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO
THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO
EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS
OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF
USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST
PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH
MAY BE DISCLAIMED BY LAW.
How to Get Warranty Service:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of
its authorized warranty service locations. If you first contact the
90
Legal and Safety
company which sold you the Product (e.g., dealer or
communication service provider), it can facilitate your obtaining
warranty service.
What This Warranty Does Not Cover:
• Defects or damage resulting from use of the Product in
other than its normal and customary manner.
• Defects or damage from misuse, accident, water, or
neglect.
• Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or
adjustment.
• Breakage or damage to antennas unless caused directly by
defects in material workmanship.
• A Product subjected to unauthorized Product
modifications, disassembles or repairs (including, without
limitation, the audition to the Product of non-MOTOROLA
supplied equipment).
• Product which has had the serial number removed or made
illegible.
• Rechargeable batteries if:
Any of the seals on the battery enclosure of cells are
broken or show evidence of tampering.
The damage or defect is caused by charging or using the
battery in equipment or service other than the Product for
which it is specified.
• Freight costs to the repair depot.
• A Product which, due to illegal or unauthorized alteration
of the software/firmware in the Product, does not function
in accordance with MOTOROLA’S published specifications
or the local type acceptance labeling in effect for the
Product at the time the Product was initially distributed
from MOTOROLA.
• Scratches or other cosmetic damage to Product surfaces
that does not effect the operation of the Product.
• Normal and customary wear and tear.
• Exclusion for defects or damage arising from use of the
products in connection with non-MOTOROLA equipment.
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a patent, and Motorola will
pay those costs and damages finally awarded against the end user
purchaser in any such suit which are attributable to any such
claim, but such defense and payments are conditioned on the
following:
• That MOTOROLA will be notified promptly in writing by
such purchaser of any notice of such claim;
• That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
• Should the Product or parts become, or in MOTOROLA’S
opinion be likely to become, the subject of a claim of
infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure
for such purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non infringing or to grant such purchaser a credit
for the Product or parts as depreciated and accept its
return. The depreciation will be an equal amount per year
over the lifetime of the Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential
damages arising from any claim of patent infringement or alleged
infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
Legal and Safety
91
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
Hearing Aid Compatibility With Mobile
Phones
Some Motorola phones are measured for compatibility with
hearing aids. If the box for your particular model has “Rated for
Hearing Aids” printed on it, the following explanation applies.
When some mobile phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing,
humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of
their mobile phones, to assist hearing device users in finding
phones that may be compatible with their hearing devices. Not all
phones have been rated. Phones that are rated have the rating on
their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the
user’s hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
92
Legal and Safety
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the
better/higher of the two ratings. (Note that not all hearing devices
have telecoils in them.)
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health
professional may help you find results for your hearing device. The
more immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Information From the World Health
Organization
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf.
Product Registration
Online Product Registration:
www.motorola.com/us/productregistration
Product registration is an important step toward enjoying your new
Motorola product. Registering permits us to contact you for
product or software updates and allows you to subscribe to
updates on new products or special promotions. Registration is not
required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
http://recycling.motorola.young-america.com/ index.html
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
There is no special handling required by consumers.
Wireless: The New Recyclable
Patent and Trademark Information
Your wireless phone can be recycled. Recycling your phone
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
MOTOROLA, the Stylized M Logo and all other trademarks
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
Legal and Safety
93
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
Software Copyright Notice
Motorola products may include copyrighted Motorola and third
party software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive
rights for copyrighted software, such as the exclusive rights to
distribute or reproduce the copyrighted software. Accordingly, any
copyrighted software contained in the Motorola products may not
be modified, reverse-engineered, distributed, or reproduced in any
manner to the extent allowed by law. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
94
Legal and Safety
Privacy and Data Security
Motorola understands that privacy and data security are important
to everyone. Because some features of your mobile device may
affect your privacy or data security, please follow these
recommendations to enhance protection of your information:
• Monitor access—Keep your mobile device with you and
do not leave it where others may have unmonitored
access. Lock your device’s keypad where this feature is
available.
• Keep software up to date—If Motorola or a
software/application vendor releases a patch or software
fix for your mobile device that updates the device’s
security, install it as soon as possible.
• Erase before recycling—Delete personal information
or data from your mobile device prior to disposing of it or
turning it in for recycling. For instructions on how to delete
all personal information from your device, please contact
your local service provider.
• Understanding AGPS—To provide location information
for emergency calls, certain Motorola mobile devices
incorporate Assisted Global Positioning System (AGPS)
technology. AGPS technology also can be used in
non-emergency applications to track and monitor a user’s
location—for example, to provide driving directions. Users
who prefer not to permit such tracking and monitoring
should avoid using such applications.
If you have further questions regarding how the use of your mobile
device may impact your privacy or data security, please contact
Motorola at privacy@motorola.com, or contact your service
provider.
•
Smart Practices While Driving
Drive Safe, Call Smart SM
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas—for example handsfree use
only. Go to www.motorola.com/callsmart (in English only)
for more information.
Your mobile device lets you communicate by voice and
data—almost anywhere, anytime, wherever wireless service is
available and safe conditions allow. When driving a car, driving is
your first responsibility. If you choose to use your phone while
driving, remember the following tips:
• Get to know your Motorola mobile device and its
features such as speed dial and redial. If available,
these features help you to place your call without taking
your attention off the road.
• When available, use a handsfree
device. If possible, add an additional
layer of convenience to your phone with
•
•
•
•
•
one of the many Motorola Original handsfree accessories
available today.
Position your mobile device within easy reach. Be
able to access your phone without removing your eyes
from the road. If you receive an incoming call at an
inconvenient time, if possible, let your voice mail answer
it for you.
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
Use your mobile device to call for help. Dial 911 or
other local emergency number in the case of fire, traffic
Legal and Safety
95
accident, or medical emergencies (wherever wireless
phone service is available).
• Use your mobile device to help others in
emergencies. If you see an auto accident, crime in
progress, or other serious emergency where lives are in
danger, call 911 or other local emergency number
(wherever wireless phone service is available), as you
would want others to do for you.
• Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number (wherever
wireless phone service is available).
96
Legal and Safety
index
accessories 9
active phone line 37
advanced calling 14
3-way calls 14
call waiting 14
alert
set 40, 75
turn off 40, 58
answer a call 13
audio formats 45
auto replies 24
battery charging 11
battery charging indicators
12
battery indicator 37
battery installation 10
Bluetooth 55
connect 55
send information 57
setting your phone 55
turning on or off 55
call
answer 13
any key answer 14
end 13
make 13
call forward 59
caller ID 59
calls
SDG, see SDG calls
center key 9, 41
contacts 77
edit/delete 16
set ringer ID 16
datebook 77
create events 34
receive events via PTT 34
setup 35
view reminders 34
dial a phone number 13
dialed calls 58
direct launch 73
display 36
index
97
drafts
see also text messages,
drafts
20
handsfree speaker 41
hearing aid 42
Hearing Aid Compatibility 92
home screen 36
earpiece volume 40
emergency number 61
end a call 13
end key 13
image formats 46
international calls 61
low battery message 37
frequently asked questions
service and repairs 84
GPS enabled
emergency calls 61
GPS, see GPS enabled
98
index
main menu 37
make a call 13
media center 45
message center
text messages 22
message indicator 37
messaging 17
modem
using your phone as a 35
MOTOtalk
calls, ending 72
channels 68
channels, setting 69
code calls, making 69
code calls, receiving 70
codes 68
codes, setting 69
direct launch 73
emergency calls 72
private MOTOtalk calls 71
private only setting 71
receiving all calls 70
setup options 73
state tone 73
switching to 68
switching to network
mode 68
talk range 68
N
navigation key 9, 41
one touch PTT 53
optional accessory 9
optional feature 9
packet data 37
phone number 17
power key 13
private calls
answer 15
call alerts 15
make 14
receive a call alert 15
PT Manager 54
PTX features 46
radio frequency 79
received calls 58
recent calls 58
recycling 93
redial 59
ring style indicator 37
ring style, setting 40
ring tones
off 75
setting 75
vibrate 75, 76
ring tones, setting 75
ringer volume 40
safety
radio frequency 79
RF energy interference 80
safety information 79
safety tips 95
SDG calls
lists, adding numbers 63
lists, creating 63
lists, deleting 64
lists, remove members 64
lists, save entries 54
make call 65
starting 65
security 44
Selective Dynamic Group
Calls, see SDG calls
send key 13
signal strength indicator 36
SIM card 10
change SIM PIN 44
enable SIM PIN 44
soft keys 36
speaker 37
speed dial 62
state tone 73
store your number 17
index
99
T
text entry 37
alpha method 39
word method 38
text messages 17, 35
creating 17
deleting 27
drafts 20
memory 28
message center 22
receiving 21
resend messages 27
sending 17
sent messages 27
voice names 60
voice mail 62
message indicator 62
receiving 62
setting up 62
100
index
volume 40
wallpaper 76
WHO information 92
your phone number 17
www.motorola.com
@NNTN7906A@
NNTN7906A
xxxxxxxx xx xx JAN/10
Printed in USA

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Company                         : Motorola
Source Modified                 : D:20100114184452
Create Date                     : 2010:01:14 13:45:36-05:00
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Modify Date                     : 2010:01:14 13:47:40-05:00
Metadata Date                   : 2010:01:14 13:47:40-05:00
Document ID                     : uuid:4b9aa0bc-9abf-4030-abab-ecfc28ddf44b
Instance ID                     : uuid:1f1d9b28-3e05-4a84-8080-8b162948f8ae
Subject                         : 40
Format                          : application/pdf
Creator                         : y10319
Title                           : Exhibit 12
Page Count                      : 107
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : y10319

EXIF Metadata provided by EXIF.tools