Motorola Mobility P56LM1 i786/i786w-SERIES iDEN MOTOTALK PHONE W/BLUETOOTH User Manual Exhibit 12

Download:
Mirror Download [FCC.gov]
Document ID	1356009
Application ID	BH140PBtgJRX+rO0+/Em0g==
Document Description	Users Guide 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	273.9kB (3423784 bits)
Date Submitted	2010-10-08 00:00:00
Date Available	2010-12-07 00:00:00
Creation Date	2010-10-08 13:32:17
Producing Software	Acrobat Distiller 8.2.3 (Windows)
Document Lastmod	2010-10-08 13:32:38
Document Title	Exhibit 12
Document Creator	Acrobat PDFMaker 8.1 for Word
Document Author:	y10319

Push-to-Talk
One touch PTT
one or more, talk to them all
You can customize the PTT Button for quick access to
push-to-talk functions from the home screen.
Private calls
Find it: Menu / >
Push To Talk > PT Manager >
Configure > One Touch PTT
Private calls are push-to-talk calls between two people.
Make and answer private calls
options
To make a private call:
Off
Turn off One Touch PTT.
• Enter the recipient’s PTT
number.
Quick PTT
• Press Menu / >
F Contacts, and select a
contact that has a PTT number.
Go to Quick PTT. See “Quick
PTT” on page 16.
Last Call
Call the most recent Private ID or
SDG list on the Recent Calls list.
To talk, press and hold the PTT Button. To listen,
release the PTT Button.
PTT Contacts
Launch the PTT Contacts list
from the home screen by
pressing the PTT Button.
Assigned No.
Call a Private ID you assigned.
Enter the number using your
keypad, or press Search and
select from Contacts, Recent
Calls, or Memo.
PT Manager
Go to the PT Manager. See “PT
manager” on page 16.
To answer a private call, press the PTT Button after the
caller has stopped talking.
To end a private call, press End/Power @ or do
nothing. The call will end after a few seconds.
Set push-to-talk speaker
You can listen to push-to-talk calls through your
phone’s speaker or earpiece. Press Speaker ) to turn
the speaker on or off.
Push-to-Talk
15
2 Press Done.
options
3 Press the PTT Button.
Send Message
See “Send messages” on
page 17
Send Picture
See “Send pictures” on page 18.
Send Event
See “Send a datebook event” on
page 19
Send My Info
See “Send my info” on page 19
Find it: Menu / >
Send Contact
See “Send contact information”
on page 20
Send Location
See “Send location information”
on page 20
• Select Quick PTT, Send Message, Send Picture,
Send Event, Send My Info, Send Contact, or
Configure. After choosing what PTT item you’re
sending, select a contact and press the PTT Button
to send.
Quick PTT
With Quick PTT, you can quickly make a PTT call,
create an SDG list, or make an SDG call when
accessing any Private ID on your phone.
Find it: Menu / >
Push To Talk > Quick PTT
Press the Navigation Key right or left to move between
Contacts, Recent Calls, or Memo.
To make a PTT call or SDG call:
1 Select the entries you want to call.
16
Push-to-Talk
To save your selections as an SDG list, press Menu /
> Save SDG. For more information about SDG lists,
see “SDG calls” on page 21.
PT manager
The PT Manager lets you quickly access PTT features,
and other PTT call features, from the main menu.
Push To Talk > PT Manager
• Select configure to configure your PTT Quick
Notes, PTT My Info, PTT Location, One Touch
PTT, or On/Off PTT.
Call alerts
Use call alerts to tell someone you want to speak to
them.
To send a call alert:
• Enter a Private ID, and press Alert. When
prompted, press the PTT Button.
• Press Contacts, and select a contact containing a
Private ID. Press Alert, and press the PTT Button
when prompted.
When you receive a call alert, you can:
• Answer: Press the PTT Button to begin a private call
with the sender.
• Queue: Press Queue to store the call alert to the
call alert queue.
• Clear: Press Clear to dismiss and delete the call
alert.
Note: Call alerts will automatically be moved to the
queue after a few minutes of inactivity. You won’t be
able to make phone calls or private calls until the call
alert is moved, or you’ve chosen one of these
options.
Turn off a call alert
You can press the volume keys to turn off a call alert
before answering the call.
Switch from a PTT call to a phone call
For longer calls, you can switch from a PTT call to a
phone call if the other caller has a phone number
stored in Contacts.
During a PTT call press Talk `. When prompted, press
Yes to begin the phone call.
Push to send
During a private call, you can send short text
messages, contacts, photos, events, or your contact
info.
When you make or receive a PTT call, your phone
automatically determines if the phone you’re calling is
able to receive push to send items. Your phone saves
this information for Private IDs on your Recent Calls
list or stored in Contacts. Your phone updates the
saved information each time it’s on a PTT call to that
Private ID.
Note: You can’t send PTT feature items during
Talkgroup calls or SDG calls.
Send messages
You can send short messages through a PTT call.
Note: Availability of this feature is dependent on your
service provider.
You can begin a message during a PTT call, from the
Contacts list, the Recent Calls list, or from the PT
Manager.
• To send a message during a PTT call, press
Menu / > Use PTT Feature > Send Message.
Write your message and press the PTT Button to
send it.
Push-to-Talk
17
• To begin a message from Contacts or the Recent
Calls list, select the entry containing the Private ID
you want to send the message to and press
Menu / > Use PTT Feature > Send Message.
Write your message, and press the PTT Button to
send it.
3 Create the message and press the PTT Button to
send it.
• To begin a message from the PT Manager, press
Menu / >
Push To Talk > PT Manager >
Send Message. Select A Contact or A Recent Call
to see a list of entries from Contacts or the Recent
Calls list that can receive messages. Select an
entry, write your message, and press the PTT
Button to send it.
Note: The first time you send a picture, Picture Fees
May Apply Continue? appears. Press Yes to send
your picture.
Note: The first time you send a message, Messaging
Fees May Apply Continue? appears. Press Yes to
continue and send your message.
2 Select the picture you want to send.
Receive messages
When you receive a message, a message notification
appears on the display.
To view the message, press Read.
To dismiss the message, press Dismiss.
Reply to a message
1 View the message.
2 Press Reply.
18
Push-to-Talk
Send pictures
You can send pictures stored in the Media Center
through private calls.
To send a picture during a PTT call:
1 Press Picture, or press Menu / > Use PTT
Feature > Send Pictures.
3 Press the PTT Button to send the picture. When
prompted, press the PTT Button to resume the PTT
call.
To send a picture from the media center:
1 Scroll left or right to Media: Pictures.
2 Select a picture and press Menu / > Send Via... >
Send Via PTT.
3 Choose A Contact or select a recipient from A
Recent Call.
4 Press the PTT Button to send the picture. When
prompted, press the PTT Button to resume the call.
To send a picture from the PT Manager:
1 Press Menu / >
> Send Picture.
Push To Talk > PT Manager
2 Choose A Contact or select a recipient from A
Recent Call.
3 Select Browse Picture, and choose a picture to
send.
1 Press Menu / > Use PTT Feature > Send Event.
Note: If this option doesn’t appear, the Private ID
you’re engaged in a PTT call with is not able to
receive Datebook events.
2 Choose an existing event, or press New to create a
new event.
4 Press the PTT Button to send the picture. When
prompted, press the PTT Button to resume the PTT
call.
3 If the event is a recurring event, select This Event
Only to send only the event selected. Select
Repeat Events to send all occurrences of the
event.
Receive a picture
4 Press the PTT Button to send the event.
When someone sends you a picture, you hear a tone
or your phone vibrates and a message appears asking
if you want to accept the picture.
Send my info
Pictures you receive are saved to your phone’s
memory. To see them press, Menu / > K Media
Center. See “View pictures” on page 46.
When you see a message asking if you want to accept
the picture, press Yes to accept or No to decline.
Clear a picture from the display
If you want to clear a picture from your phone’s display
while still on a call, press Menu / > Clear Screen.
To send your phone’s contact information through a
PTT call:
• While in a PTT call, press Menu / > Send Via PTT
> Send My Info, and press the PTT Button to send.
• From the home screen, press Menu / >
Tools
> My Info > Menu / > Send My Info via PTT.
Enter a Private ID or press Browse to chose a
recipient from Contacts, Recent Calls, or Memo.
Press the PTT Button to send.
Send a datebook event
You can also send a Datebook event during a PTT call.
Push-to-Talk
19
Configure my info
You can control what portion of the information in My
Info is sent and whether it is sent automatically in
every PTT call or only when you choose to send it.
Find it: Menu / >
Push To Talk > PT Manager >
Configure > PTT My Info > Info to Send
recipient or press Browse and select a Private ID
from Recent Calls, Contacts, or Memo. Select the
contact information you want to send and press the
PTT Button to send it.
Send location information
1 Select or remove the fields you want to send.
Using your phone’s GPS feature, the following can be
shared through PTT calls:
2 Press Done.
• Time stamped latitude/longitude
The information your phone always sends includes My
Name, and Private. You may also send Mobile,
Other, IP, Private2, Work1, Work2, Home, Email1,
Email2, Fax, and Pager.
• Relative location or direction and distance from the
sender in miles or kilometers
To control whether My Info automatically sends your
information, press Menu / >
Push To Talk > PT
Manager > Configure > PTT My Info > Auto Send.
Select On or Off.
1 Select A Contact or A Recent Call, and select a
recipient.
Send contact information
2 Press the PTT Button.
You can send contact information through PTT calls.
• To send contact information during a PTT call, press
Menu / > Use PTT Feature. Select Send Contact
and select the contact you want to send. Press the
PTT Button to send the information.
• To send a contact from the home screen, press
Menu / >
Push To Talk > PT Manager >
Send Contact. Enter the Private ID number of the
20
Push-to-Talk
Find it: Menu / >
Send Location
Push To Talk > PT Manager >
Note: Only contacts and recent calls able to receive
your location information will be shown.
Turn PTT features on and off
You can turn on and off your phone’s ability to send and
receive messages, pictures, and Datebook events
through PTT calls.
You can’t turn off your phone’s ability to send and
receive My Info and contact information.
To turn PTT features on and off, press Menu / >
Push To Talk > PT Manager > Configure >
On/Off PTT Features. PTT features with a check mark
next to them are turned on. To turn a feature off, select
it. The check mark next to it will disappear. Select the
feature again to turn it back on.
Unanswered calls
If you receive a PTT call and dismiss it, or make a PTT
call that isn’t answered, you can send an automatic
text message to the other caller.
Find it: Menu / >
Push To Talk > PTT Options >
Busy Text Response > Incoming PTT or Outgoing
PTT
options
Off
Turn feature off.
Soft Key
Press Send Msg to send text
message.
Automatic
Send message automatically
without being prompted.
SDG calls
Need to talk to more than one person at a time? With
SDG (Selective Dynamic Group) calls you can talk to up
to 20 people at a time.
Note: To store groups on your phone you need a
group-call-capable SIM card. Contact your service
provider for more information.
Create SDG lists in contacts
Find it: Menu / > F Contacts
1 Select [New SDG List].
2 If you want to assign a name to the SDG list, enter
the name.
Note: If you do not assign a name, the SDG list is
named “SDG” followed by the number of members
in the SDG list. For example, “SDG (8)” for an SDG
list with eight members.
3 Add Private IDs.
4 Press Save.
Add Private IDs
You can add Private IDs to an SDG list by selecting
them from Contacts, the Recent Calls list, or Memo.
You can add all members in an existing SDG list by
selecting the list. You can select more than one
SDG calls
21
member from Contacts and the Recent Calls list. A
check mark appears next to each selected item.
3 Press Menu / > Remove All Members.
4 Press Yes to confirm.
1 While creating an SDG list, select [Add Member] or
select [Add Number] and press Browse.
Delete an SDG list from contacts
If you choose [Add Number] in step one, you can
enter a Private ID from the keypad.
2 Press Menu / > Delete SDG List.
2 Scroll to the members you want from Contacts, the
Recent Calls list, or Memo and press r. A check
mark appears next to each selected member.
3 Press Done.
Remove members or SDG lists
Remove one member from an SDG list
1 Scroll to the SDG list you want to delete.
Make SDG calls
1 From Contacts or the Recent Calls list, scroll to or
select the SDG list you want.
2 Press the PTT Button.
Start an SDG call with a Private ID
1 From Contacts, scroll to the SDG list you want to
delete the member from.
1 From the home screen, enter the Private ID, or from
the Contacts list or the Recent Calls list, scroll to
an entry containing the Private ID.
2 Press Edit.
2 Press Menu / > Call SDG.
3 Scroll to the number you want to remove.
3 Add more Private IDs. See “Add Private IDs” on
page 21.
4 Press Menu / > Remove Member.
5 Press Save.
Remove all members from an SDG list
1 From Contacts, scroll to the SDG list you want to
delete the member from.
2 Press Edit.
22
SDG calls
If you want to save the SDG list you have created,
press Menu / > Save SDG, or if you do not want to
save the SDG list, press Done.
4 Press the PTT Button to make the call.
SDG call information
icon
While you are in an SDG call, the following appears on
the screen:
• The name of the SDG list.
A member of the SDG list whose status
is unknown.
• The name or the Private ID of the person speaking.
• The number of participants in the SDG call.
SDG call details
During an SDG call, you can view details about the
other SDG list members, such as their name or Private
ID, and their status on the call. To view SDG call
details, press Details.
In the SDG call details view, these icons appear next to
member names or Private IDs:
icon
The member of the SDG list who is
speaking.
A member of the SDG list who is active
on the SDG call, but not speaking.
A member of the SDG list who has
exited the call.
A member of the SDG list who could not
be reached on the SDG call.
SDG calls
23
MOTOtalk™
Switch to MOTOtalk
Note: Availability of this feature is determined by your
service provider.
1 Press Menu / >
Make off-network calls between MOTOtalk enabled
phones and Family Radio Service products.
When you see MT Ready, you can begin using
MOTOtalk.
Note: Range will vary based on terrain, man-made
structures and atmospheric conditions.
While in MOTOtalk, this icon 4 is displayed on the
status bar.
With MOTOtalk, you don’t need your carrier’s network
to stay in touch with friends and family. You can:
Exit MOTOtalk
• Use code or private mode operation
To switch to network mode:
• Use up to 10 channels and 15 codes
1 While in MOTOtalk, press Menu / >
Talk > MT Options.
• Communicate with standalone MOTOtalk radios
While in MOTOtalk, you’re not using your carrier’s
network. Some features are unavailable:
• On-network phone or PTT calls
• Data transmission
• Incoming message notification
• Datebook
• Call forwarding
• Call timers
• Call alerts
Note: You can’t use MOTOtalk with older Family Radio
Service products.
24
MOTOtalk™
Push To Talk > MOTOtalk.
2 Select Go to MOTOtalk.
Push To
2 Select Exit MOTOtalk.
Talk range
While in MOTOtalk mode, phones should be a
minimum of 6 feet apart.
Channels and codes
Note: When making a code call, all parties that are on
your code and channel can hear your conversation.
Set channels and codes
To set a channel:
1 From the MOTOtalk home screen, press Edit.
2 Select the channel field, scroll to a channel and
press r to select it.
3 Press Back.
To set a code:
1 From the MOTOtalk home screen, press Edit.
2 Select the code field, scroll to a code and press r
to select it.
3 Press Back.
Make code calls
To make a code call:
1 Press and hold the PTT Button. You’ll see Transmit
appear on the display. Begin speaking after you hear
the MOTOtalk tone.
Note: A MOTOtalk call can be ended at any time by
pressing End/Power @.
Receive all MOTOtalk calls
If you set the code to Receive All, your phone can
receive MOTOtalk transmissions from any phone that
is set to the same channel, regardless of the code
(1-15). When you receive transmissions with the code
set to Receive All, the code that the transmission was
received on will replace Receive All on the display.
Note: You cannot initiate a code call when the code is
set to Receive All.
To set the code to Receive All:
1 From the MOTOtalk home screen, press Edit.
2 Release the PTT Button to listen.
2 Select the code field, scroll to Receive All and press
r to select it.
If you receive an error message, it may mean:
3 Press Back to return to the MOTOtalk home screen.
• No one is on your channel or code.
Press the PTT Button to reply to the call.
• You are out of range.
Receive code calls
When you receive a code call, you'll see Receive. After
hearing the MOTOtalk tone, you have 6 seconds to
reply before the call times out.
To reply to the call, press the PTT Button.
Private MOTOtalk calls
If you want to have a private conversation without
other parties listening in, you can make a private
MOTOtalk call. The person you are calling must be in
MOTOtalk and set to the same channel to receive your
call.
MOTOtalk™
25
Private only
To set MOTOtalk to ignore code calls, so that you only
make or receive private MOTOtalk calls, set your code
to Pvt Only.
To set the code to Pvt Only:
1 From the MOTOtalk home screen, press Edit.
2 Select the code field, scroll to Pvt Only and press
r to select it.
3 Press Back to return to the MOTOtalk home screen.
Make a private MOTOtalk call
1 Enter the Personal Telephone Number (PTN) of the
person you want to call on your channel. If the PTN
is more than 10-digits, enter the last 10-digits of the
PTN, or scroll to a number or name in Contacts or
the Recent Calls list.
2 Press and hold the PTT Button. Begin speaking after
your phone emits the MOTOtalk tone.
3 Release the PTT Button to listen.
The number or name of the person you are calling will
appear in the display.
If you receive an error message:
• The PTN you entered is invalid.
• The person that you are trying to reach is in network
mode.
26
MOTOtalk™
• The person that you are trying to reach is set to a
different channel.
• The person that you are trying to reach is out of
range.
Receive a private MOTOtalk call
The number or name of the person who is calling
appears in the display.
To reply, press the PTT Button.
End code calls and private MOTOtalk calls
Code calls and private MOTOtalk calls will end
automatically after 6 seconds of inactivity.
The MOTOtalk home screen will display.
Note: A private or code MOTOtalk call can be
interrupted during the 6 second idle time by another
code call or private call.
make emergency calls while in MOTOtalk
If you attempt to make an Emergency 911 call while in
MOTOtalk mode, your phone will automatically exit
MOTOtalk mode and attempt to find a network signal.
If you are out of network coverage your phone will not
be able to make an emergency 911 cellular call until
you go back into the network coverage area.
You must wait until the phone reconnects to the
network before attempting to make an emergency 911
cellular call.
Direct launch
Setup options
1 From the Setup screen, scroll to Direct Launch and
press r.
You can set up MOTOtalk options on the MT Options
screen. You can access this screen in both network
and MOTOtalk modes.
To access setup options:
1 Press Menu / >
MT Options.
Push To Talk > MOTOtalk or
2 Select Setup.
To set your phone to launch MOTOtalk when you
select MOTOtalk from the main menu:
2 Select On.
Note: If Direct Launch is set to On, the MOTOtalk
setup options will be unavailable from the main menu.
However, you can still access setup options while in
MOTOtalk by pressing Menu / >
Push To Talk >
MT Options > Setup.
To turn off Direct Launch:
You can set the following MOTOtalk options:
options
Direct Launch
Launch directly into MOTOtalk
when you select MOTOtalk from
the main menu.
State Tone
Have an alert sound notify you
that you have used MOTOtalk for
a specified interval.
1 From the Setup screen, scroll to Direct Launch and
press r.
2 Select Off.
MT Options will now display when you select
MOTOtalk from the main menu.
State Tone
To set your phone to alert you after you have used
MOTOtalk for a specified interval:
1 From the Setup screen, scroll to State Tone and
press r.
2 Select the interval after which you want the tone to
sound.
MOTOtalk™
27
For example, if you select 1 hour, you will be notified
every hour that you are in MOTOtalk.
To turn off State Tone:
1 From the Setup screen, scroll to State Tone and
press r.
2 Select Off.
Talkgroups
Have a larger audience than 20 people? Talkgroups are
the solution.
Note: Availability of Talkgroups, and the maximum
number of Talkgroup members, is dependent on your
service provider. Contact your service provider to
establish a Talkgroup.
Join a Talkgroup
Before you can make a Talkgroup call, you’ll need to
join the Talkgroup.
1 Press Menu / > F Contacts.
2 Select the Talkgroup.
3 Touch Join.
Make a Talkgroup call
• Enter the Talkgroup number and press the PTT
Button.
Tip: Talkgroup numbers begin with a #. For example
#155.
• Press Menu / > F Contacts, select the Talkgroup
and press the PTT Button.
28
Talkgroups
Text entry
options
Your phone provides convenient ways to enter words,
letters, punctuation, and numbers whenever you are
prompted to enter text (for example, when adding a
Contacts entry or when sending a message).
Word
Predictive text – predicts the word
you want, with just one keypress
per letter. If the prediction is
correct, press the Navigation Key
right to accept the word. If the
prediction is not correct, press
and hold the Navigation Key down
to see other options. Highlight the
correct word and press r to
select.
Symbols
Enter symbols.
Numeric
Enter numbers.
Text Input
Settings
Select the desired entry language
and Word Prediction features.
Insert
Select an item to be inserted,
such a picture, an audio clip or a
voice recording.
Change character input mode
1 When you see a screen where you can enter text,
press Menu / to change the character input mode.
2 Select one of the following options:
options
Alpha
Press a key one or more times to
cycle through the letters and
numbers of that key. When you
see the character you want, just
press another key or wait a
second or two to move on.
Note: Only available when using
MMS messaging.
Tip: When entering text, press and hold # to change
letter capitalization (Abc > ABC > abc).
Text entry
29
Contacts
Store a phone number or Private ID
Find it: Menu / > F Contacts > [New Contact]
1 Enter a name for the new entry. Each entry’s name
can contain 20 characters.
Messaging
Find it: Menu / > P Messages
Your phone can use SMS and Multimedia Messaging
service messaging. The type of messaging your phone
uses is determined by your service provider.
2 Select a ring tone.
Create & send messages
3 Select a type for the entry (Mobile, Private1,
Private2, Work1, Work2, Home, Email, Email2,
Fax, Pager, Talkgroup, SDG, Msg Group, IP, or
Other). Choose Private1 or Private2 to store a
Private ID.
Find it: Menu / > P Messages > [Create Message]
4 Enter the number for the entry and press Save.
Call a stored phone number or Private ID
Find it: Menu / > F Contacts
1 Scroll to the Contacts entry.
2 If the Contacts entry contains more than one
number, scroll left or right until the type of number
you want to call is displayed (such as Mobile,
Private1, Private2, Work1, Work2, Home).
3 If you chose a phone number, press Talk ` to begin
a call. If you chose a Private ID, Talkgroup ID, or SDG
list, press and hold the PTT Button to start a call.
30
Contacts
1 Enter the phone number of the person you want to
send the message to and press r, or press Search
to select a contact or recent call.
2 Enter your message in the Message field.
3 Insert (embed) or attach a picture, sound, or quick
note.
• Quick notes are short, pre-written phrases.
Press QNotes to enter a quick note.
• To insert pictures, sounds, (audio files), or voice
recordings into the body of your message,
press Menu / > Insert > Insert QNotes,
Insert Picture, Insert Audio, Insert Video,
Capture Video, Capture Picture, or Record
Voice.
Note: You can insert one item at a time. To
remove an item from a message, highlight it
and press Delete.
• To attach a file to the end of your message,
select ....MORE.... > Attach > [New Attach] >
Browse Pictures, Capture Pictures, Browse
Audio, Record Voice, Browse Video, or
Record Video.
Note: You can only attach pictures and audio
files if they’re not forward locked and if
they’re not DRM-protected.
Tip: To remove an attachment, select Attach.
Select the attachment to remove, and press
Menu / >Unattach.
Note: You cannot attach or insert pictures, sounds
(audio files), or voice records in SMS messages.
These features are only available with MMS
messaging.
4 When finished writing your message, press r.
Tip: While viewing a message, press the Navigation
Key left or right to scroll through your messages.
Manage received messages
features
forward a message
Highlight the message and press Menu / >
Forward.
Embedded objects and attachments are also
forwarded.
reply to a message
Open the message and press Reply to reply to the
sender only.
For MMS messages you can also reply to all
recipients: Press Menu / and select Reply All.
5 To send the message, press Send.
Select [Create Reply] to create your message, or
select a short phrase from the list.
Receive messages
view, play, or open an embedded object or
attachment
When you receive a message, your phone plays an
alert and shows a notification.
• To view the message, press Read.
Highlight the embedded picture or audio file to view
or play it.
• To dismiss the message notification, press Exit.
For attachments, press r.
To read your messages later, press Menu / >
P Messages > Inbox.
Note: Attachments of an unknown type cannot be
opened, but can be deleted.
Messaging
31
features
save an embedded object
When creating the message, select ....MORE.... for
these options:
Highlight the picture or audio file and press
options
Menu / > Save Picture or Save Audio.
Subject
Create or edit the subject line.
save an attachment
Attach
Attach a picture, audio file, or voice
record.
Cc
Send a copy of the message to
someone else.
Auto Replies
Create a list of short answers for
the recipient to choose when
replying to your message.
Priority
Set priority Normal or High.
Valid Until
Set the date after which attempts
to deliver the message end, or
press No Date.
Highlight the attachment and press Menu / > Save
Attachment.
delete an embedded object or attachment
Highlight the embedded picture, audio file, or
attachment and press Menu / > Delete Picture,
or Delete Audio, or Delete Attachment.
delete a message
Highlight the message and press Delete and then
Yes to confirm.
Multimedia message options
Multimedia messages (MMS) can contain text,
pictures, and audio files. When you create an MMS
message you have more options than for a simple text
message.
Manage your messages
Cleanup messages
Set how long and/or how many messages are stored
in the inbox and sent items folders. This feature
deletes only read messages, unlocked messages, and
sent messages.
32
Messaging
Find it: Menu / > P Messages, press Menu / >
Setup > Cleanup
options
1 Select Inbox or Sent Items.
Custom
2 Chose a cleanup option from the following list:
Specify cleanup settings of up to
199 messages or 99 days for the
inbox and sent items.
options
3 Press Yes to automatically delete messages now, or
press No to delete messages later.
Off
Messages are never automatically
deleted.
5 Messages
Messages are deleted in the order
they were received, starting with
the oldest, until five are left.
10 Messages
Messages are deleted in the order
they were received, starting with
the oldest, until 10 are left.
1 Day
Messages are deleted if they’re
older than one day.
3 Days
Messages are deleted if they are
older than three days.
Save unsent messages are stored in the drafts folder.
FirstIn
FirstOut
Messages are deleted as
necessary on a first-in first-out
basis.
1 To edit a draft, select it to open it. You can change or
add recipients, and edit the message.
Message threads
If message threads are supported by your service
provider, you can organize your messages by subject
or sender.
Find it: Menu / > P Messages, press Menu / >
Threading > None, Subject, or Sender
Note: Threading by subject is only available with
Multimedia messages.
Edit & send drafts
Find it: Menu / > P Messages > Drafts
Messaging
33

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2010:10:08 13:32:38-04:00
Create Date                     : 2010:10:08 13:32:17-04:00
Metadata Date                   : 2010:10:08 13:32:38-04:00
Creator Tool                    : Acrobat PDFMaker 8.1 for Word
Format                          : application/pdf
Title                           : Exhibit 12
Creator                         : y10319
Document ID                     : uuid:4ff7a867-0dcc-423c-8936-dd6f738c9943
Instance ID                     : uuid:afa171b7-63c7-4c7d-a02f-ad9a7ca48162
Producer                        : Acrobat Distiller 8.2.3 (Windows)
Has XFA                         : No
Page Count                      : 19
Author                          : y10319

EXIF Metadata provided by EXIF.tools