Motorola Mobility T5HD1 Portable Cellular CDMA Transceiver with Bluetooth User Manual Exhibit 8 Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	774662
Application ID	72lS2wmw+w9zMTC8xsPNtA==
Document Description	Exhibit 8 Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	154.48kB (1931006 bits)
Date Submitted	2007-03-30 00:00:00
Date Available	2007-03-30 00:00:00
Creation Date	1904-02-26 11:54:40
Producing Software	Acrobat PDFWriter 4.05 for Power Macintosh
Document Lastmod	2007-03-05 17:08:04
Document Title	Exhibit 8 Users Manual
Document Creator	QuarkXPress(MAC)
Document Author:	Seo Hyun Jeong

APPLICANT: MOTOROLA, INC.
FCC ID: IHDT5HD1
USER’S MANUAL
• A preliminary draft copy of the User’s Manual follows this cover
page.
• The text on the following three pages will be added for FCC
requirements.
EXHIBIT 8
FCC Notice To Users
Motorola has not approved any changes or modifications to this
device by the user. Any changes or modifications could void the
user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
If your mobile device or accessory has a USB connector, or is
otherwise considered a computer peripheral device whereby it can
be connected to a computer for purposes of transferring data, then
it is considered a Class B device and the following statement
applies:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
FCC Notice
FCC Notice
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Specific Absorption Rate Data
SAR Data
This model wireless phone meets the
government’s requirements for exposure to radio
waves.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian
regulatory authorities. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure
the safety of all persons, regardless of age or health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC and by the Canadian regulatory
authorities is 1.6 W/kg.1 Tests for SAR are conducted using
standard operating positions accepted by the FCC and by Industry
Canada with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
SAR Data
level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate
at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless
base station, the lower the power output.
Before a phone model is available for sale to the public in the U.S.
and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each
government for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body)
reported to the FCC and available for review by Industry Canada.
The highest SAR value for this model phone when tested for use at
the ear is 1.52 W/kg, and when worn on the body, as described in
this user guide, is 1.25 W/kg.
(Body-worn
measurements differ among phone models, depending upon
available accessories and regulatory requirements).2
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the governmental
requirements for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications & Internet Association
(CTIA) Web site:
http://www.phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA)
Web site:
http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for this
product.
SAR Data
Welcome!
Welcom to the world of Motorola digital wireless communication!
We are pleased that you have chosen the Motorola V3a wireless phone.
Personal Communications Sector
600 North U.S Highway 45
Libertyville, Illinois 60048
1-800-331-6456(United States)
1-888-390-6456(TTY/TDD United States)
10800-461-4575(Canada)
www.motorola.com
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of
Motorola, INC. Ⓡ Reg. U.S Pat. & Tm. Off. TrueSync, Sidekick, Starfish and the Stylized Starfish Logo are
registered tradmarks of Starfish Software, Inc., a wholly owned independent subsidiary of Motorola, Inc. All
other product or service names are the property of their respective owners.
◎ 2003 Motorola, Inc.All rights reserved. Printed in the U.S.A
Software Copyright Notice
The Motorola prouducts described in this manual may include copyrighted Motorola and third party software
stored in semiconductor memories or other media. Laws in the United States and other countries preserve
for Motorola and third party software, such as the exclusive rights to distribute or reproduce the copyrighted
software. Accordingly, any copyrighted software contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced i any manner to the extent allowed by law. Furthemore, the
purchase of the Motorola products shall not be deemed to Motorola or any third party software provider,
except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of
a product.
Manual number :
Cover number :
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION.READ THIS INFORMATION BEFORE USING YOUR PHONE.
The information provided in this document supersedes the general safety information in user guides published
prior to December 1, 2002.
Operational Precautions
To assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set
forth in the relecant standards, always adhere to the following procedures.
External Antenna Care
Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy.
When you communicate with your phone, the system handling your call controls the power level at
which your phone transmits.
Use only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications, or
attachments could damage the phone.
Do NOT hold the external antenna when the phone is IN USE. Holding the external antenna affects call quality
and may cause the phone to operate at a higher power level than needed. In addition, use of unauthorized
antennas may result in non-compliance with the local regulatory requirements in your country.
Your Motorola phone is designed to comply with local regulatory requirements in
your country concerning exposure of human beings to RF energy.
When placing or receiving a phone call, hold your phone as you would a wireline telephone.
●Federal Communications Commission laws : the 2nd parts of J paragraph at 47 CFR
●ANSI / IEEE C 95.1-1992
●IEEE C 95.1-1999
●NCRP Report 86, 1986
●ICNIRP 1998
●Canada, Department of Health & Human Services, safety regulation, 6th articclesFrequency 3KHz ~ 300GHz, Electromagnetic power radiation emission regulation 1999
●Australia communication Associates, “Wireless communication(Electromagnatic radiation emission)
Standards 1999
To maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting,
always place the phone in a Motorla-supplied or approved clip, holder, holster, case, or body harness for this
phone, where available. Use of accessories not approved by
Motoroal may exceed RF energy exposure guidelines. If you do not use one of the body-worm accessories
approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone
and its antenna are at least 1inch(2.5centimeters) from your body when
transmitting.
Exposure To Radio Frequency(RF) Energy
Phone Operation
Body-Worn Operation
Responsible driving best practices may be found in the "Wireless Phone Safety Tips" at the end of this manual and
at the Motorola website : www.Motorola.com/callsmart.
Operational Warnings
For Vehicles With an Air Bag
Do not place a phone in the area over an air bag or in the air bag deployment area. Air bags inflate with great force.
If a phone is placed in the air bag deployment area and the air bag inflates, the phone may be propelled with great
force and cause serious injury to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless it is a phone type
especially qualified for use in such areas and certified as "Intrinsically Safe." Do not remove, install, or charge
batteries in such areas. Sparks in a potentially explosive atmosphere can cause an sxplosion or fire resulting in
bodily injury or even death.
Note : The areas with potentially explosive atmospheres referred to above include fueling areas such as below
decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles,
such as grain, dust, or metal powders. Areas with potentially
explosive atmospheres are often but not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn OFF your phone when your are near electrical blasting
caps, in a blasting area, or in
areas posted "Turn off electronic devices." Obey all signs and instructions.
Medical Devices
Pacemakers
Pacemaker manufacturers recommend that a minimun separation of 6 inches(15centimeters) be
maintained between a handheld wireless phone and pacemaker.
Persons with pacemakers should :
●ALWAYS keep the phone more than 6inches(15centimeters) from your pacemaker when the
phone is turned ON.
●NOT carry the phone in the breast pocket.
●Use the ear opposite the pacemaker to minimize the potential for interference.
●Turn OFF the phone immediately if you have any reason to suspect that interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference,
you may want to consult your hearing aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if it is
adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.
Use While Driving
Check the laws and regulations on the use of phones in the area where you drive. Always obey them.
When using your phone while driving, please :
●Give full attention to driving and to the road.
●Use hands-free operation, if available.
●Pull off the road and park before making or answering a call if driving conditions so require.
Operational Warnings
For Vehicles With an Air Bag
Do not place a portable phone in the area over an air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable phone is placed in the air bag deployment area
and the air bag inflates, the phone may be propelled with great force and cause serious injury
to occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your phone prior to entering any area with a potentially explosive atmosphere, unless the phone is a
model specifically identified as being “Intrinsically Safe.” Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury
or even death.
Note : The areas with potentially explosive atmospheres referred to above include fueling areas such as below
decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles,
such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your
vehicle engine. Areas with potentially explosive atmospheres are aften but not always posted.
Batteries
Batteries can cause property damage and/or bodily injury such as burns if a conductive material such
as jewelry, keys, or beaded chains touch exposed terminals. The conductive material may complete an electrical
circuit(short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing
it inside a pocket, purse, or other container with metal objects. Use only
Motorola original batteries and chargers.
Your battery or phone may contain symbols, defined as follows :
Symbol
Definition
Important safety information will follow.
Your battery or phone should not be disposed of in a fire
Your battery or phone may require recycling in accordance
with local laws. Contact your local regulatory authorities for
more information.
Your battery or phone should not be thrown in the trash.
Your phone contains an internal lithium ion battery.
Contents
contents
II. Basic Operation
II. 기본기능사용하기
I. Before Using
Confirming Components
Name and Function of Each Part
Basic Keypad Operation
Menu Map
Display Icon
How to Use Battery
Cell Phone and Battery Pack
The Battery and UIM Card
Charging Battery Pack
Battery Pack Charging
Progress State
Battery Pack Charging Time
Battery Pack Operating Time
Low Voltage Alert
Battery Pack Care Information
Precautions When Using
15
15
16
17
21
22
22
23
23
24
24
25
25
26
II. Basic Operation
Power ON and OFF
Power ON
Power OFF
Placing a Call
Placing a call from Phone Book
Turbo Dialing
10
IV. Using Display
30
30
30
31
31
Placing a Call
Receiveing a call
Electronic Dialing
Emergency Dialing
Receiveing a call Using
Earmicrophone
Setting Call Receive Mode
Using Auto Machine
Unanswered Call
31
32
33
34
35
38
III. Using Sounds
Changing Ringer
Saving Recorded Sound
Changing Receive Mode
Setting Etiquette Mode
Changing Ring Volume
Selecting Ringer Option
Setting Sound Effect Power On/Off
Key Pressed
Folder
Confirm
Setting Alert Tone
Connect
1 Minute
No service
Graphic Mode
Setting graphic using pictures
Watch style
Change Banner
Setting Menu Style
Setting Menu Background
Backlit Select
Main LCD
Keypad
Rotator Close
V. Using Scheduler
Schedule
Entering Schedule
Checking Schedule
Clearing Schedule
Setting Alarm
Alram off
Alram Set
40
41
41
42
43
44
45
45
45
45
46
46
46
VI. Using Multimedia
48
50
51
51
52
52
53
53
53
Using To Do List
Entering To do
Checking To do
Clearing To do
Calculator
World Time
55
56
57
58
61
62
63
63
63
64
65
VI. Using Multimedia
Using Camera/Camcorder
Using Photograph
Using Photo List
Using Camcorder
Using Video List
Setting Shot Mode
67
68
73
74
78
79
Using Camera/Camcorder
Viewing Memory Info
Using Help
Using Movie
Using IrDA
80
80
80
81
81
VII. Using Security
Using Auto Lock
Lock Code
Call Restrict
PIN Set
One-Touch Lock Feature
Require PIN
PIN Change
Reset
S/W Version
83
84
84
85
85
86
87
Using Setting
VI.VIII.
타이머기능사용하기
Call Waiting
Call Forward
Fwd
Fwd
Fwd
Fwd
All Calls
Default
If Busy
If No ANS.
Change Language
Setting Auto Area Code
Set Key Input
Data Mode
Data Profile
Use 1X Data
Comm. Port
Using ShortCut
89
89
90
90
91
91
92
92
93
94
94
94
95
11
IX.
Voice Wizard
VI. Using
타이머기능사용하기
Voice Memo
Recording
Ending Recording
Play of Recording
Deleting Recorded Content
Xl. Using Phone Book
97
97
98
98
X. Using Call History
Viewing Call history information
View Unans Call list
View Call to list
View CLI list
Delete Unans Call, Call to, CLI List
Clear All
Delete individual number
Viewing Call Timer
Individual
Outgoing
Roam Timer
Cumulative
100
100
101
101
102
102
102
102
103
103
103
103
Xl. Using Phone Book
Storing a Number
Storing a Number from a Menu 105
Storing a Number on idle Mode 105
Correcting Phone BookCorrecting Phone Book
110
Correcting Name and E-mail Adds111
Correcting Group
111
Deleting Phone Book Deleting the whole Phone Book 113
Deleting Stored List
113
Deleting Individual Items
114
Deleting Group
114
12
Searching Phone Book View All
Recall By Loc
Recall By Group
Recall By Name
Using [OPTIONS]
Memory Status
View my Num
Copy Entries
XllI. Using SMS Features
115
116
116
117
118
119
119
120
122
122
122
123
123
123
Text Message
Voice Message
Sending Message
Sending a New Message
Sending a Stored Message
Move to Stored Message
Outbox
Setting Message Receive Function
Alert Frequency
View Msg
Msg Sound
Save To
125
127
128
129
130
130
131
131
131
132
132
XVI. Using UNI
133
133
134
Accessing UNI
Accessing Magic
XlV. Using E-mail
Sending E-mail
New e-mail
Sending stored e-mails
Using the folder menu
Using the e-mail menu
Replying/Forwarding e-mails
Managing Data Folder
Data Folder
Receiving & View Setting
Send & New Mail Setting
Register Account Setting
Others
View Mail Settings
Mail Config Setting
E-mail Setting
XllI. Using SMS Features
Checking Message
Delete received message
Deleting saved message
Checking New E-mail
Xll.Using Functions During a Call
Adjusting Tone Volume During a Call
Taking Note During a Call
Using Phone Book During a Call
Sending My Number
Using Muting
Using Speaker Phone
Memory Status
Deleting Message
136
139
140
141
142
144
144
145
146
147
147
148
148
149
Accessing U-Map
Accessing UNI
UNI MENU
Accessing Magic
Magic MENU
Key usage in Magic
Download Magic applications
Execute Magic applications
Accessing U-Map
U-Map Menu
162
162
163
163
164
164
165
166
166
XVlI. Appendix
Troubleshooting
Specific Absorption Rate data
Specification and Characteristics
168
169
171
XV. Using Data Folder
Using Data Folder
Display All
User Folder
My Data
Picture
Ring
vCard
Others
151
154
156
158
159
159
160
13
Before Using
1. Confirming Components
● Phone
● Battery(700mAh)
● User’
s Manual
Before Using
1. Confirming Components
2. Name and Function of Each Part
15
Accessory link hole
Camera Lens
2. Name and Function of Each Part
15
3. Basic Keypad Operation
16
Volume Button
4. Menu Map
17
External LCD
5. Display Icon
21
Voice Wizard Button
6. How to Use Battery
22
7. Precautions When Using
26
Receiver
You may not hear the
other called party’
s voice
when pressing the call
phone against your ear to
listen more clearly in a
noisy circumstance.
Internal LCD
Camera Button
Navigation Button
Photo Sensor
TOP MENU Button
MAGIC Button
SEND Button
END Button
Etiquette One
Touch Button
One Touch
Lock Button
Charger,
Communication
Cable port
Transmitter
Speaker
Speaker is existed
behind phone
Intenna
Never touch the intenna
during a call and touching
it may degrade speech quzlity
Earpice Terminal
Covering the microphone
reduces the your voice or
may not send it.
15
Before Using
Before Using
3. Basic Keypad Operation
4. Menu Map
● To Place or receive a call.
● Short press : To dispaly a calling number list
●
● To turn the power ON/OFF and end a call
● To end a selected feature to return to the initial screen
● To delete characters or number while entering them
Short press : One-touch for Camera Preview mode
Long press : One-touch for Multimedia menu
Short press : To delete characters one by one
Long press : To delete the whole characters
● To use idle mode feature
● To move to the upper menu or previous display screen
MENU
1. Sound
1. Ringer Style
2. Ringer/Vib
3. Volume
Left : One-touch for‘PB’Search mode
Right : One-touch for‘Message’menu
Up : One-touch for‘Mai’
l Menu
● To search lists and control volume during a call
Down : One-touch for‘Data Folder’
● To use menu feature - Menu search feature
● Dial buttons - To enter numbers and characters
●
Quick dialing for an international call
●
To set/reset Etiquette feature
To set/reset One-touch lock feature
● One-touch for voice wizard menu
16
4. Group Bell
5. Effect Sound
● One-touch for UNI accesing.
● To use menu and message features - [OK] feature
● To move to the‘TOP MENU’in idle mode
● To use menu and message features - [OPTIONS] features
● To move to the top‘Magic’in idle mode
● To use menu and message features - [BACK] or
6. Alert Sound
7. System Alert
2. Display
1. Main LCD Graphic
1. Idle
2. Incoming Call
3. Outgoing Call
4. Power On
5. Power Off
2. Display
3. Scheduler
5. Menu Style
1, Schedule
6. Display Style
2. Alarm
7. Dial Number
1. Easy Alarm
2. My Alarm
3. Morning Call
8. Backlight
2. Sub LCD Graphic
1. Idle
2. Incoming Call
3. Outgoing Call
4. Power On
5. Power Off
3. Memo
4. D-day
3. MainLCD Idle
4. SubLCD Idle
[CANCEL] features
17
Before Using
Before Using
MENU
4. Multimedia
1. Camera
2. Photo List
3. Camcorder
MENU
5, Voice Wizard
1. Ans. Machine
1. Set Answering
2. Record Ment
3. Play Ment
4. Message Inbox
2. Voice Memo
4. Video Player
5. MP3 Player
6. Setting
7. Memory Status
1. Record
2. Play
3. Recorded Sound
1. Record Sound
2. Play Sound
6. Security(lock code)
1. Lock Phone
1. Call Answer
2. Lock Privacy
2. Call Waiting
3. Lock Code
3. Cal Forward
4. PIN Code
1. Require PIN
2. PIN Change
5. Call Restrict
6. Reset
1. Reset Setting Values
2. Clear Files
7. Emergency Call
8. Help
1. Fwd All Calls
2. Fwd Default
3. Fwd If Busy
4. Fwd If NO ANS.
4. Change Language
5. Auto Area Code
6. Data Mode
1. Data Profile
2. Use 1X Data
8. S/W Version
18
7. Setting
7. Setting
7. U-Mail Config
1. U-Mail Sound
2. Setup
3. Data Reset
8. Tool Kit
1. Biorhythm
1. Set Birthday
2. View Biorhythm
2. Lucky Number
8. Browser Setup
1. Linger Time
9. Phone Book
1. Search
1. Search All
2. By Name
3. By Group
4. By Turbo Dial
5. By Number
9. Phone Book
6. Call History
1. All Calls
2. Incoming Call
3. Outgoing Call
4. Missed Call
7. Call Timer
3. Calculator
2. Store Number
4. World Time
3. Group Manager
5. Stopwatch
4. Turbo Dial
5. Copy Number
1. UIM To Phone
2. Phone To UIM
1. Latest Time
2. Incoming Time
3. Outgoing Time
4. Total Time
5. Roaming Time
8. Memory Status
9. View My Num
3. Comm. Port
19
Before Using
Before Using
Message
UNI
Data Folder
5. Dispaly Icon
Current signal strength this indicated by the number of lines shown.
1. Create Message
2. Inbox
1. Phone
2. UIM
3. Voice Msg.
4. Web Alert
6. Memory Status
1. Inbox
2. Outbox(Sent)
3. Outbox(Draft)
4. UIM
1. Mail
Phone Lock setting activated. Disappearing when it is inactivated.
2. Magic
3. My Data
Vib. Only.
4. Umedia
7. Mobile QQ
Vib. & Bell
Vib. Then Bell
Silent
Etiquette mode status. Disappearing when it is inactivated.
5. Picture
Indicates battery charge level
To reduce battery consumpton,
5. Music Street
6. Bookmarks
5. Setting
Indicates Ringer type is Bell Only.
3. Info
4. My Documents
4. My Phrase
Text or voice message received. It disappears when you retrieve new message.
2. User Folder
Alarm setting activated. Disappearing when you discharge Alarm setting.
3. Outbox
1. Sent Msgs
2. Drafts
3. UIM
Indicates current calling status. This icon appears when a call is in process.
1. Display All
6. Ring
7. SMIL
if the set lighting time arrives,
the LCD lights off automatically.
Fully charged status shown
9. Others
Low battery warnning
The display caries depending on the Rx mode you have selected at Data setup
Data Received
8. vCard
Low battery
If you connect the data communication cable, it is displayed on the screen.
Fax Received
Displayed on screen when you use the earmicrophone.
Displayed on screen when Answer Machine is in activation.
To be displayed on the display screen when you use your handfree kit.
20
21
Before Using
Before Using
The Battery and UIM Card
7. How to Use Battery
I. Installing UIM Card on the Phone
Cell Phone and Battery
Disconnect the battery pack from the phone and side UIM Card into the rail
I. Assembling
II. Removal
on the back of the phone.
③
①
②
①
②
UIM Card ?
NOTE!!
①Pull battery cover in the front direction
while pressing the removal button
②Insert battery and fit the battery cover
① Pull in the frornt direction while pressing the
UIM Card contains your Phone Number, service details, and phonebook/message memory,
Caution : Do not bend or scratch your UIM Card. Avoid exposing your UIM Card to static electricity, water, or dirt.
Charging Battery Pack
removal button.
② Open the battery cover and push the both part in
correctly into the groove provided on the
the arrow direction and the removal the battery
bottom-hand side of the handset
from the handset.
③ Slide it all the way in the arrow direction until
a‘click’is heard.
The battery is not fully charged when it is supplied. Be sure to charge the battery fully before
you use the phone.
● Connect the power plug of the charger to the outlet.
● Connect the jack of the charger to the port on the side of the phone.
■ When you use USB Hub device to use charging battery, data service or mPT, it must be
restricted as following,
※Before removal the battery, be sure to turn off the power of the phone. Forcible removal of the battery may cause
malfunction. Cell phone and battery cover shall be always combined.
22
1. USB hub must match USB Power Distribution Specification.
2. Use USB hub with self-power as possible.
3. When you want to charge your phone with USB, it is recommended to use PC host root hub.
4. When you want to charge with hub that is not match spec., only one port must be used.
23
Before Using
Before Using
Battery Pack Charging Time
Description
Required Time
Low Voltage Alert
● When the battery pack is almost used up, the phone sounds ‘b
a eep’and‘
700mAh (V3a)
‘ flashes.
● If you continue to use your phone in this state, the power of the phone is turned off. lmmediately charge your phone.
Under 3 hours
● If‘
● Recharging time varies by the battery pack and charger status.
● If AC power voltage applied to the power supply adapter is low, the charging time may become longer.
● If ambient temperature is too high or low, charging may not be done sufficiently. Always charge the battery in room temperature.
‘flashes, although you press the button, backlight for display screen and buttons may not be On and the cell phone
features are not supported properly. Immediately charge your phone before using again.
Battery Pack Care Information
● Always use the authorized, dedicated charger and battery pack. If an unauthorized battery pack is installed, a
‘Warning! Unauthorized Battery’message is displayed on the Wait display screen.
Battery Pack Operating Time
● Using and unauthorized charger could cause damage to the battery pack or explosion may result. Never use such a product.
700mAh (V3a)
Time
Slot Mode 0
Slot Mode 1
Slot Mode 2
Standard Standby Time
About 70 hours
About 115 hours
About 170 hours
Standard Talk time
About 170 Min
● The slot mode varies according to service areas.
● Electric currents are consumed more during a call or when using UNI or Game than in standby state, so the
the longer call time is, the shorter the standby time becomes.
● Never short-circuit the contact terminals of the battery pack. Explosion may result. Always store the battery pack
in the battery case
● Always charge or store the battery pack in room temperature. Charging would not be done sufficiently and the indicator lamp
changes into orange if you change the battery pack in a too hot place(in a car in summer or near open flames)or a too cold
place. If it is stored over an extended period of time, its capacity level becomes lower, shortening its operating time.
● Never disassemble the battery pack or place it near open flames.
● Store the charger and battery pack in the area out of children’
s reach.
● Receiving a call requires the same amount of electric currents as when placing a call.
● Never give a strong impact to your phone or let it drop. Malfunctions or short life may result.
● Standby time in‘NO SERVICE’area becomes shorter.
● Any foreign matters in contact with the metallic part of contact terminals on the charger and battery pack may interfere with
● The operating time varies accrding to charging state, temperature(low/high),radio wave condition in the area of use,
backlight status.
charging process. Always keep them clean.
● The chargeable battery pack is a consumable item. Repeated switching between charging and discharging reducess its service
life slowly. If the battery operating time is reduced to a half level compared to that when purchased, replace it with a new one.
24
25
Before Using
7. Precautions When Using
● If the lamp flickers while you are charging your phone and battery, charging operation fails. If you leave it in such a state,
the charger may malfunction.
● Always use authorized, dedicated battery pack and charger. Using an unauthorized battery pack or charger rejects the services
offered by Motorola.
● Do not use the charger to charge phones and batteries of different models. Problems may result.
Basic Operation
● Never use them in a humid, hot atmosphere. If your phone becomes damp, malfunction may result. If submerged, it may
be beyond repair. Never turn the power ON with your phone wet. Instead, remove the battery pack and contact the nearest
service center for repair.
● Never disassemble or alter your phone. Unauthorzed disassembly may reject free service offered by Motorola.
1. Power ON and OFF
28
2. Placing a Call
28
● Avoid cleaning your phone with chemical solutions such as solvent or thinner.
3. Receiving a Call
30
● Use care not to give an impact or vibration to your phone. When not in use, it should be stored in a safe place.
4. Unanswered Call
31
● If you sit down with your phone stored in a hip pocket, use care not to give a strong impact to it. It may be broken.
● Use the authorized handsfree kit. Otherwise, malfunction may result. Especially, products having strong magnetism may be a
direct cause for malfunction of cell phone, which will reject the free service offered by Motorola.
● In order to prevent any harm to human body, do not hold the battery in the mouth and do not use the damaged battery.
● Keep the handset away from any magetic product such as credit card, phone card that may be damaged by the electro magnetic
field of the handset.
● Keep the handset away from any heating facility such as stove, microwave or oven.
● Do not apply excessive force to the handset to protect appearance and internal parts of the handset.
● Do not hold the strap and turn the handset round not to hurt anyone.
● Be sure that the handset is not held between the automatic doors of a bus or subway train.
26
5. Using the [OPTIONS] functions while
entering letter
31
6. Using My Menu
33
Basic Operation
Basic Operation
1. Power ON and OFF
Placing a call from Phone Book
Use search to select a desired person to call. (see P.115~117 Searching Phone Number)
Power ON
Select a person to call ▶Select an item to call ▶
Press and hold
● Pressing
● The displaying China Unicom and user-set graphic. And then, the initial screen is displayed.
with a person to call selected connects the call to the number set
to‘Main Number’among the items with phone numbers stored.
Power OFF
● Press
Press and hold
on the idle mode. You can search phone numgers with
‘Name’,
‘Group’or‘Turbo’in the Phonebook.
● The graphic disappears and the power is turned off.
● A graphic can be downloaded from UNI and changed in
‘MainLCD Graphic or SubLCD Graphic’Display Graphic may be
displayed late depending upon the capacity of the downloaded graphic.
2. Placing a Call
Turbo Dialing
If a number is registered in‘Turbo Dial’
, press and hold‘Turbo Dial’on the main screen to make a call to the number.
(location number is 17, Press the dial button
Electronic Dialing
Enter a desired area code and phone number ▶
ARS(for telebanking service or voice message confirmation). To cancel electronic dial, press
Input key
● If the phone is locked, you should enter the password to make a call.
● Call Time is automatically displayed on the LCD. The call charge is calculated from the time the called
party receives your call.
You can use this function conveniently by entering a few numbers in advance according to the audio announcement when using
● The phone automatically redials if the call is not connected. If you press an incorrect number, you can
correct the number with
and press and hold
[CANCEL].
Operating Method
The numbers after
‘P’
can be sent only if the
The numbers after
‘T’
are sent shortly after
[TAP] is pressed.
Enter Phone Number ▶ Ente‘P’or
‘T’
and then a number to be dialed electronically ▶
28
29
Basic Operation
Basic Operation
Receiveing a call Using Earmicrophone
Emergency Dialing
Even when the handset is in Lock, you can still make a call using the emergency number stored on the phone.
When the earmicrophone is connected, press
or the earmicrophone button to receive an incoming call.
When the folder is shut, press the earicrophone button to receive an incoming call. After finishing the call, press the
Enter an Emergency Number ▶
earmicrophone button to release the call.
● These numbers were copied and saved from UIM card.
4. Unanswered Call
If the user fails to receive a call, the following image is displayed on the display screen.
● Pressing keypad button moves the phone to Idle Mode.
● Shortly press
3. Receiving a Call
‘Missed Call’list. Press
If a call is received, open the folder
● Press and hold
from Standby display to view‘Missed’
● However, the caller is restricted for call origination,
‘Restricted Num’will be displayed on
or
[OK] to view the call date and time.
to suppress the ringer or vibrates for incoming call.
● Receiving a call graphic can be downloaded from UNI and changed in
‘Incoming Call’under‘Display’
Graphic may be displayed late depending upon the capacity of the downloaded graphic.
● You can change ringer style, call receive mode, reception status.
● The graphic appearing when a call is received can be download from
‘UNI’and changed in ’
MainLCD Graphic or SubLCD
Graphic’. under
‘Display’. If you set graphic to a download graphic, when a call is received, the selected ringer tone or graphic
may be displayed late depending on the capacity of the downloaded graphic.
30
5. Using the
[OPTIONS] functions while entering letter
Available to use all text input modes on a mobile device. (etc : Banner, Picture/Video name, Create Message)
Select entering letter mode and
[OPTIONS] ▶ Select a desired menu
● It is an easier way to input texts with pressing
[OPTIONS] in a text input mode.
31
Basic Operation
Basic Operation
Using SYMBOL
Using PASTE
In a text input mode, you are able to select any symbol mark.(SYMBOL, SPECIAL, NET SYM)
Select SYMBOL ▶
Using a‘EDIT’menu, copied and cut sentences would be saved automatically therefore users are able to
recall these sentences.
Select the symbol and press keypad button
Select PASTE ▶
Using PHRASE
[OK]
● Up to 5 texts can be saved in‘PASTE’
. The oldest one will be deleted automatically, and the new one will be saved.
After saving your favorite sentences, it is available to recall saved sentences.
Select PHRASE ▶
Select a desired paste list and
Select a desired phrase list and
● When‘PASTE’is popped out, you can delete PASTE lists with pressing
[SELECT]
[Delete All].
Using UNDO
● You enable to save‘PARASE’to‘My Phrase’on the‘Message’menu.
If you press
● Regarding‘PHRASE’
, you can input maximum Chinese 40 characters or English 80 characters.
Using EDIT
[OPTIONS] after executing Cut or Delete function,
‘UNDO’function will be displayed. Select
‘UNDO’to go back
to the input mode before the execution of
‘CUT’or‘DELETE’.
Select UNDO ▶
Select a desired paste list and
[OK]
Users enable to copy, cut or delete what users inputted in a text input mode.
COPY : You can copy the selected text to
‘PASTE’.
Using REVERT
CUT : You can cut the selected text and save the text in
‘PASTE’.
DELETE : You can delete the selected text.
Select EDIT ▶ Select the first few words of the text you want by pressing
[START] ▶ Select the text you want by pressing
32
, and press
Select REVERT ▶
Select a desired paste list and
[OK]
, and press
[STOP] ▶ Select a desired menu
33
Basic Operation
6. Using My Menu
You can copy frequently-used means to
‘My Menu’and edit them. If‘MY MENU’
is displayed while you searching menu features,
press
[MY MENU] to move it to My Menu.
Select a desired Menu and press
[MY MENU] ▶ Select‘Yes’to set up ▶ Select a desired icon
● Even if a menu is moved to My Menu, menus in the existing folder is not erased. Up to 8 items can be added to My Menu.
● To delete menus copied to My Menu, select a menu to delete, press
● Press
34
in the idle mode to display the My Menu.
Using Sounds
[DELETE], and then select a value.
1. Changing Ringer
35
2. Changing Receive Mode
36
3. Changing Ring Volume
38
4. Selecting Group Bell
39
5. Setting Effect Sound
40
6. Setting Alert Sound
41
7. Setting System Alert
42
Basic Operation
Using Sounds
1. Changing Ringer
2. Changing Receive Mode
User can change the ringer which is used to alert call incoming Except the ringers saved in the mobile phone, user can download
You can set a desired receive tone sounded when a call or message is received.
the melody using uni and can set to the ringer. Also user can set recorded sound to the ringer.
● Receive Mode icon
●Ringer Style
Melody : 1~23
Bell Only :
Unique Sound : 1~16
My Bell / MP3 : 1~10
Downloaded : 1~10
Simple Bell : 1~9
Vib. Then Bell :
Recorded Sound : 1~10
Vib. & Bell :
Silent :
MP3 : 1~100
[TOP MENU] ▶Select Sound ▶Select Ringer/Vib ▶
[TOP MENU] ▶ Select Sound ▶ Select Ringer Style ▶
Vib. Only :
Select Ringer Tone and
Select Receive mode and press
[OK]
[OK]
Setting Etiquette Mode
●You can adjust volume with
during the bell setting. (5 steps)
You can switch the ringer or alarm tone sound into vibration or mute not to damage others during the conference, class, or in
●The menu of Recorded Sound is displayed only when there is any recorded sound. (See P.00)
public place. If the earmic is connected, even in the etiquette mode, you can hear the ring on the earmic.
●If you select Etiquette mode‘
Setting Downloaded
’is displayed on the idle mode.
1. How to set
You can set the ring with the downloaded melody.
Press and hold
Press
in idle mode ▶ Select Display All ▶Select a ringer data and
▶ Select ADD BELL ▶ Select a value
[OK] ▶ Press
[OPTIONS]
● A message‘Etiquette Mode is On.’is displayed and then the phone generates vibration and
moves to Mode.
●In Etiquette mode, the ringer will be replaced by vibration.
●Even if you turn OFF then ON your phone, it will remain in Etiquette mode.
36
37
Using Sounds
Using Sounds
2. How to reset
3. Changing Ring Volume
You can adjust the Volume.(Bell, Voice, Key Tone, Message Alert, Missed call alert, Camera Shutter, Camera Preshutter)
Press and hold
●A message‘Etiquette Mode is Off.’
is displayed and then the phone moves to Wait Mode.
● If Etiquette Mode is set
● Power Off : Muted
●Power On : Vibration
●Key Pressed : Muted
●Notice Popup : Muted
●Folder : Muted
●Missed Call Frequency : Muted
●Schedule Sound : Muted
●Anniversary Sound : Muted
●D-day Sound : Muted
●Alarm : Muted
● Ringer : Vibration
●Msg Sound : Muted
● Camera Pre-Shutter : Muted
●Camera Shutter Sound : Sounded
[TOP MENU] ▶ Select Sound ▶ Select Volume ▶
Press
Select a desired menu ▶
Set the Volume ▶
[STORE]
Bell : You can adjust the volume of the ring. (1~5 Steps)
Voice : You can adjust the volume of the earpiece. (1~5 Steps)
Key Tone : You can adjust the volume of the key tone. (0~5 Steps)
Message Alert : You can adjust the volume of the incoming SMS alarm. (1~5 Steps)
Missed call alert : You can adjust the volume of the
‘Missed Call’alarm. (1~5 Steps)
Camera Shutter : You can adjust the volume of the camera shutter tone. (1~5 Steps)
Camera Preshutter : You can adjust the volume of the camera pre-shutter tone. (0~5 Steps)
38
39
Using Sounds
Using Sounds
4. Setting Group Bell
5. Setting Effect Sound
You can select the ring and the graphic for incoming call by group.
[TOP MENU] ▶ Select Sound ▶ Select Group Bell ▶
Select desired group ▶
[OK] ▶
Setting Bell/Image ▶
Select a desired Bell/Image and ▶
[OK] ▶ Press
[STORE]
[TOP MENU] ▶ Select Sound ▶ Select Effect Sound ▶
Setting Bell
Select‘
’and Press
the effect and
[LIST] ▶
Select Ringer Tone and Press
[OK]
● If no ringer is selected by phone number, the ringer selected for the group is applied. If no specific ringer is selected either
for the phone number or the group, the ringer selected in
‘Ringe’
r in‘Sound’is applied.
[OK] ▶ Press
Select‘
’and Press
[OK] ▶
Set
Power On/Off : You can set the tone muted or sounded when turning the power On or Off. (Off, Sound 1, Sound 2)
If you select‘Off’in this field, the initial screen is displayed without sound after the vibration.
Key Pressed : You can enable/disable the key tone. (Off, Doremi, Dew Drop, Synthesizer, Voice(Chinese), Voice(English))
You can adjust the key tone volume with
Setting Image
Select a desired menu and
[STORE]
in the Idle mode. (5 Steps)
Notice Popup : You can enable/disable the tone for the message box(popup menu) as it is displayed on the screen.
[OK] ▶
Select Image and Press
[OK]
The message box tone(popup menu) varies by the situation. (Off, On)
Folder : You can set or clear a tone for opening and closing your folder. (Off, Folder(1~3))
● If graphic is not selected for a phone number, the graphic selected for the group is displayed. If no specific graphic is
selected either for the phone number or the group, the
‘Incoming Call’graphic selected in‘MainLCD Graphic or Sub
LCD Graphic’in‘Display’is displayed.
40
41
Using Sounds
Using Sounds
6. Setting Alert Sound
7. Setting System Alert
[TOP MENU] ▶ Select Sound ▶ Select Alert Sound ▶
the Alert and
[OK] ▶ Press
Select a desired menu and
[OK] ▶
Set
[STORE]
[TOP MENU] ▶ Select Sound ▶ Select System Alert ▶
the effect and
[OK] ▶ Press
Select a desired menu and
[OK] ▶
Set
[STORE]
Missed Call Frequency : You can set the frequency of the
‘Missed Call’alarm. (Off, Once, Every 2Min)
Connect / Disconnect : You feature notifies you of call connecting when you place a call. (On, Off)
Missed call sound : You can select the sound for the
‘Missed Call’alarm. (Off, Missed call sound 1~3)
1 Minute : This function displays call time during a call and sounds an alert 10 seconds in advance at every 1 minute lapse
Schedule Sound : You can select the sound for the
‘Schedule
’alarm in the‘Schedule’menu.
(Off, Sound 1~10)
from the start of call connection. (On, Off)
Anniversary Sound : You can select the sound for the
‘Anniversar’alarm
in the‘Schedule’menu.
(Off, Sound 1~10)
Out of Service : You can set the alert tone made when the handset is out of the service area. (On, Off)
D-day Sound : You can select the sound for the
‘D-day’alarm in the‘Schedule’menu.
(Off, Sound 1~10)
Low Battery : You can switch on/off the battery low alarm. (On, Off)
Easy Alarm Sound : You can select the sound for the
‘Set Easy’alarm in the‘Alarm’menu.
(Melody 1~23, Unique Sound 1~16, Simple Bell 1~10, Downloaded 1~10 MP3 1~100, Recorded Sound 1~10)
42
43
Using Display
1. Setting Main/Sub LCD Graphic
You can change graphics to be displayed according to the phone status.
●You can set the‘Idle, Incoming Call, Outgoing Call, Power On, Power
Off’screen on Main LCD and Sub LCD with the photos taken with the
Using Display
built-in camera or the graphic files downloaded from UNI.
1. Setting Main/Sub LCD Graphic
44
2. Setting Main/Sub LCD Idle
45
3. Setting Menu Style
48
4. Setting Display Style
48
5. Setting Menu Background
52
6. Back Light Time
52
7. Setting Dial Number
50
6. Setting Backlight
50
[TOP MENU] ▶ Select Display ▶ Select Main/Sub LCD Graphic ▶Select a desired mode ▶
desired graphic ▶ Press
Setting a
[OK]
Copying downloaded graphics to‘Downloaded Image’
You can set the‘Idle, Incoming Call, Outgoing Call, Power On, Power Off’screen on Main LCD and Sub LCD with the graphic
files downloaded from UNI and stored in the
‘Data Folder’
Press
in idle mode ▶ Select Picture ▶ Select a desired data and
▶ Select ADD ONE and Press
[OK] ▶ Press
[OPTIONS]
[ADD]
● You can copy up to 10 graphics to‘Download Image’
● Select the downloaded graphic and press
[DELETE].
45
Using Display
Using Display
2. Setting MainLCD Idle
3. Setting SubLCD Idle
● In the‘MainLCD Idle’setting mode, pres
[PREVIEW] to
check the screen for Main LCD or Sub LCD before setting and
saving the screen.
[TOP MENU] ▶ Select Display ▶ Select MainLCD Idle ▶
Setting Main LCD Idle ▶Press
[STORE]
Clock : You can select the clock to be displayed in the MainLCD idle. (Small(Top), Small(Center), Digital(Up), Digital(Center), Analog)
Wolrd Time : You can select whether the World Time should be displayed in the MainLCD idle. If you have selected
‘On’for
[TOP MENU] ▶ Select Display ▶ Select SubLCD Idle ▶
Setting Sub LCD Idle ▶Press
[STORE]
4. Setting Menu Style
‘World Time’
, you can select a country of which time is to be displayed in the MainLCD idle.
Calendar : You can determine whether a calendar is to be displayed in the MainLCD idle.
Navigator Menu : You can select the method of displaying the navigator menu icons to be displayed in the MainLCD idle.
(Off, Only Softkey, Small(Bottom), LAGE)
Banner : You can set and enter the banner to be displayed in the MainLCD idle.
Banner Text Color : You can select the text color of the banner to be displayed in the MainLCD idle.
[TOP MENU] ▶ Select Display ▶ Select Menu Style ▶Setting Menu Style ▶Press
[STORE]
Menu Style : You can select the type of menu displayed on the LCD. (Tree Menu, Icon Menu)
Wallpaper : You can select the background of the screen. (Wallpaper 1~13)
Transparency : You can select the level of transparency of the wallpaper. In the
‘Menu Style’setting mode, Press
46
to check the screen for menu style before setting and saving the screen.
[PREVIEW]
47
Using Display
Using Display
5. Setting Display Style
7. Setting Backlight
You can select the screen display of the phone.
You can set backlight status of the phone.
Theme : You can select the theme of the menu bar or the pop-up
window displayed on the phone. (Theme 1~3)
● To enhance battery efficiency, photo sensor function is included.
● If you do not use the phone within the configured lighting time after
Wallpaper : You can select the background of the screen. (Off, Wallpaper 1~11)
opening folder, the screen goes to the screen saver mode and the
Transparency : You can select the level of transparency of the wallpaper.
lights are turned off.
[TOP MENU] ▶ Select Display ▶ Select Display Style ▶
Setting display ▶Press
[STORE]
[TOP MENU] ▶ Select Display ▶ Select Backlight ▶
Setting Backlight ▶Press
[STORE]
LCD Maintenance : You can open the folder to set Back light Time. (Ultra Save(5sec), Power Save(10sec), Normal(30sec))
6. Setting Dial Number
MainLCD Brightness : You can adjust brightness of main LCD. (1~5 stpes)
You can select the type of dial displayed when you press a number key in the Idle mode. (Normal, Color, Calligraphy, Razr)
SubLCD Contrast : You can adjust Contrast of Sub LCD. (1~5 stpes)
Keypad Maintenace : You can set key back light time. (Always Off, Off In 2sec, Off In 5sec, Off In 10sec)
[TOP MENU] ▶Select Display ▶Select Dial Number ▶
48
Select a desired type ▶Press
[OK]
49
Using Scheduler
1. Schedule
If you store schedule(Sched, ToDo, Anniv.), the phone sounds alarm on the appropriate date and displays the stored content.
● To enter date, press
to switch the enter mode. Enter mode is
switched in thesequence of‘DAY ▶MONTH ▶ YEAR’.
Using Scheduler
Press
1. Schedule
52
2. Setting Alarm
54
3. Using Memo
57
4. Using D-day
58
5. World Time
65
[TOP MENU] ▶ Select Scheduler ▶ Select Schedule ▶
to enter the appropriate date,year and month.
Select date and
[OK] ▶
Select a desired menu
Entering Schedule
● You can set the schedule alarm and the anniversary alarm.
● Up to 50 Chinese letters or 100 English letters for the content
of schedule can be entered.
● When you set the clock and alarm, press
and then press
Select Sched/ToDo/Anniv. ▶
[OK] in the concerned mode,
[OPTIONS] ▶ Select ADD ▶ Input Schedule/TO DO/Anniversary ▶
[STORE]
51
Using Scheduler
Using Scheduler
Checking Schedule
Clearing Schedule
Select date and
▶
[OK] ▶
Selcect Check list and
Select Sched/ToDo/Anniv.
[OK] ▶View content
● If numbers of items are stored for each category (Schedule, To Do,
[TOP MENU] ▶ Select Security ▶ Select Reset ▶ Select Clear Files and Enter Lock Code
▶
Select Schedule ▶
Select On and Press
[STORE] ▶ Select Yes and Press
[OK]
● All items in‘Schedule’are deleted from‘Schedule’
r.
Anniversary) on the same date, select the item to dispaly
with
Using
, and then, press
2. Setting Alarm
[OK].
● Once Alarm is set,‘
[OPTIONS]
’is displayed on Wait display screen.
● You can stop alarm ringing by opening/closing the floder or
Select date and
▶ Press
[OK] ▶
[OPTIONS] ▶
Select Sched/ToDo/Anniv.
press
[Voice Wizard],
[Camera],
or
[OK].
Select a desired menu
[TOP MENU] ▶ Select Scheduler ▶Select Alarm ▶ Select Alarm Setting Menu
ADD : You can save numbers of Daily on a day. To save Dailys, select acategory (Schedule, To Do, Anniversary),
press
[OPTIONS] and then, press
‘ADD’
MONTHLY LIST : To check a monthly list of
‘Schedule, To Do, Anniversary’
TOTAL LIST : You can view the list of the selecteed item(Schedule, To Do, Anniversary).
DELETE ONE : You can delete the selected list.
DELETE ALL : You can delete all the lists of the selected item (Schedule, To Do, Anniversary) regardless of the date.
52
53
Using Scheduler
Using Scheduler
Setting Set Easy
Setting Morning Call
This mode enables you to make the alarm sound at an approximate time with no need to set a specific time.
● You can enter the desired time in the Easy Alarm setting.
You can set morning call sounded repetitively by setting repetitive number and time interval. Even though the receive mode is set to
‘Vib’or the cell phone is set to‘Etiquette Mode’
, as for morning call, alarm is sounded.
● You can select a bell for Easy Alarm in the
‘Easy Alarm Sound’
Frequency : Off, Once, Daily, Mon To Fri, Mon To Sat
setting in‘Alert Sound’in the‘Sound’menu.
Repeat : Once, Twice, 3Times, 4Times, 5Times
● You can deactivate the‘Easy Alarm’setting by selecting‘Off’in the Easy Alarm setting mode.
Interval : Every 5Min, Every 10Min, Every 15Min, Every 20Min, Every 30Min
● To deactivate a morning call, select‘Off’for‘Frequenc’
y in the Morning Call setting mode.
Select Set Easy ▶ Select a desired time and Press
[OK]
Select Morning Call ▶
Setting My Alarm
▶
You can select up to three specific times and period for alarm.
● Alarm cycle
Off : You can deactivate the selected alarm.
Select Interval ▶
● If you press
Select Frequency ▶
Setting Ringer and
Setting Alarm Time and
[OK] ▶
[OK] ▶
Select Repeat
[STORE]
[OFF] when the morning call rings, the morning call of the date is canceled regardless of the repetition numbers
Once : Alarm sounds only once at the set time.
you configured. If you close after opening the folder or press
Daily : Alarm sounds at the set time everyday.
the morning call rings as many repetiton numbers as you configured.
[OK] or
[Voice Wizard],
[Camera] while alarm rings,
Mon To Fri : Alarm rings at the specific time from Mon to Fri.
Mon To Sat : Alarm rings at the specific time from Mon to Sat.
All Alarm Off
[TOP MENU] ▶ Select Security ▶ Select Reset ▶ Select Clear Files and Enter Lock Code ▶
Select My Alarm ▶
Select Alarm 1~3 ▶
Setting Alarm and Press
[STORE]
Alarm ▶
Select‘On’▶ Press
[STORE] ▶ Select‘Yes’and Press
Select
[OK]
● You can set different sound and frequency for 3 alarms.
● To deactivate an alarm, select the alarm and check
‘Off’for‘Alarm Frequency’
54
55
Using Scheduler
Using Scheduler
Title : You can enter a title of the D-day. The title can be made with up to 10 Chinese letters or 20 English letters.
3. Using Memo
Date : You can set the date for D-day.
You can store the content of the work to do and manage your schedule for it.
● In order to edit a memo, display the memo list, press
[EDIT]
and then, type the memo.
● In order to delete a to do, press
[MENU] in the to do list and
select the delete to do(DELETE ONE/DELETE ALL).
● Up to 40 Chinese letters or 80 English letters can be entered
●To enter date, press
[OK] and select the date from the calendar.
to switch the enter mode. Enter mode is switched in thesequence of
‘DAY ▶MONTH
▶ YEAR’. Press
toenter the appropriate date,year and month.
Time : You can set the alarm time for D-day.
Alarm : You can turn On/Off the D-day alarm.
●The alarm is deactivated if you select‘Off’in the‘Alarm’setting, or activated if you select other than
‘Off’
for the content of memo.
[TOP MENU] ▶ Select Scheduler ▶Select Memo ▶ Select a desired list and Press
Enter the content and Press
●In the Date setting mode, press
[EDIT] ▶
[OK]
Select Icon : You can select the icons for the D-days.
Display On Idle : You can display or hide D-day on the LCD in the
‘Idle mode’
●You can select the sound for D-day in‘D-day Sound’in‘Alert Sound’in the‘Sound’menu.
Unknown : You can select the color of
‘D-day’displayed on the LCD in the‘Idle mode’
4. Using D-day
You can set the D-day function for important anniversaries or schedules.
Clearing D-day
● If the D-day list is empty, press
[OK] to go to
the input mode. If there is an item in the D-day list,
select
[MENU] and‘ADD’to go to the D-day input mode.
● To delete a D-day, press
[TOP MENU] ▶ Select Security ▶ Select Reset ▶ Select Clear Files and Enter Lock Code ▶
D-day ▶
Select‘On’▶ Press
[STORE] ▶ Select‘Yes’and Press
Select
[OK]
[OPTIONS] in D-day list, and
select the delete menu(Delete One, Delete All).
[TOP MENU] ▶ Select Scheduler ▶Select D-day
56
Setting D-day and press
[STORE]
57
Using Multimedia
1. Using Camera
Using the built-in camera, you can take photos.
● Press and hold
[Camera] in the idle LCD to activate the
‘Preview’
mode and Press
Using Multimedia
1. Using Camera
61
2. Using Photo List
64
3. Using Camdorder
66
4. Using Video Player
69
5. Using MP3 Player
71
6. Setting
73
[Camera] in the idle LCD to display the Camera menu.
[TOP MENU] ▶ Select Multimedia ▶Select Camera ▶ Camera Preview mode
Taking a photo
● If you don’
t select
[STORE]for a photo, this will not be
stored. The stored photos will be maintained in
‘Photo List’
● You can control zoom using a
● You can enter name or memo of the photo, or select Protect or Lock
in the File Manager input mode.
Camera Preview mode ▶Press
[OK] or [Camera] picture-taking ▶
[STORE] ▶ File Manager input and
[STORE]
● You can enter up to 12 Chinese letters or 24 English letters for the title of a photo.
● You don’
t need enter title and memo for every photo to save. The title of the photo is automatically entered.
● Press
[CAMERA] to switch the phone from the camcorder mode to the camera mode.
59
Using Multimedia
Using Multimedia
Size : It enables you to set picture size. You can see the resolution in the top of screen.
Taking self-photo
(For Idle, 1280×960, 640×480, 320×240, 176×144)
You can take the photo of yourself while viewing the sub-LCD.
Hold down the press [Camera] while the folder is closed ▶
▶ Press
●Select‘For Idle’to take the photo of the phone LCD size.
Select Camera and [Camera]
Quality : Pictures taken using a cellular camera phone look the same on the phone, but they are different when sent via
[Camera] picture-taking
e-mail or download to PC. (Best, Good, Normal)
● If the phone is locked, the‘Camera Menu’is not displayed even if you press and hold [Camera].
● You can control zoom using a
Situation : You can set the status of photo-taking.
Day Time : Select this item when you are taking photos during the day or in the light.
Night : Select this item when you are taking photos in the evening or in the dark.
● If you take a self-photo with the folder closed, the photo is automatically saved in the
‘Photo List’
, not needing to press
Multi Shot : With this function, numbers of photos are taken in series with a shot. (Off, 3 frame, 6 frame, 9 frame)
the Save button.
● Size of the photo taken with the phone is not fixed. The photo size is depending on the color of the photo.
Timer : A photo is taken after the designated seconds since you press the shutter button. (Normal, 3sec, 5sec, 10sec)
● You can receive a call incoming in the camera mode. However, the phone will not return to the camera mode when the call is finished.
Memory : You can check the memory status of the phone.
● The‘Camera Shutter’sounds even if the phone is in the Etiquette mode.
Using
Using Menu
[OPTIONS]
Camera Preview mode ▶
Camera Preview mode ▶Press
60
[OPTIONS] ▶
Select a desired menu ▶
Select a value and press
[OK]
Select a desired menu ▶
Select a value
Using Multimedia
Using Multimedia
Zoom : You can zoom in the scene to take a photo. However 1280×960 size, zoom setting is not available.
Using
[OPTIONS]
Bright. : You can adjust brightness of the photo. (10 step : 10~100)
Select General/Favorite ▶Select Photo list and Press
Cont. : You can adjust contrast of the photo. (10 step : 10~100)
▶
Effect : You can select the effect of the photo. (Off, Negative, Solarize, Sepia, Mono)
Select a desired menu and press
[OPTIONS]
[OK]
Flip : It allows you to change the picture display of top/bottom.
Frame : It allows you to set the perfect frame for your picture. Be mindful that the function is available only
for the size of 176×144. If you use the frame function, the size of the photo is automatically fixed to 176x144.
●8 frame images are supported. (Off, Frame 1~8)
SEND E-MAIL : You can attach the selected photo to an E-mail message.
PHOTO EDITOR : You can modify the selected photo.
2. Using Photo List
Resize : You can resize the selected photo. However, you can only downsize the photos.
You can view pictures stored after taking them with a cellular camera phone.
Rotate : You can rotate the selected photo.
General : The photos taken with the phone camera are automatically saved.
Frame : You can modify the selected photo with the selected frame.
Favorite : The photos moved to‘Favorite’from‘Genera’are
displayed.
Flip : It allows you to change the picture display of top/bottom, left/right.
Effect : You can use the various display effects for the selected photo.
MOVE : You can change location of the selected photo. (Favorite, General, User Folder)
FILE MANAGER : You can modify‘Name, Protect, Lock, Memo’of the selected photo with
‘File Manager’
Name : You can edit the name of a selected photo.
[TOP MENU] ▶ Select Multimedia ▶Select Photo List ▶Select General/Favorite ▶Select Photo and
● If you press
pressing
62
[VIEW]
[VIEW] in the photo list, the data (time, size) on the selected photo are displayed. You can enlarge the photo by
[LARGE].
Protect : You can protect a selected photo not to delete.
Lock : You can set a selected photo to lock.
PREVIEW STYLE : You can select the display mode of the
‘Photo List’
. (List, 2×2 Image, 3×3 Image, Image List)
63
Using Multimedia
Using Multimedia
ARRANGE : You can re-sort the photo list. (Time, Name, Resolution, Memory Size)
Recording Video
SELECT ALL : You can select all photos in a folder(General, Favorite).
● Select
SLIDE SHOW : You can view the selected photos in slide.
[CANCEL] or
to cancel the recording.
● When recording video, sound is also recorded.
MOVE : You can move the selected photos to another folder(General, Favorite) at a time.
● You can enter up to 12 Chinese letters or 24 English letters for title of a video.
PROTECT/LOCK : You can set‘Protect/Loc’for
the selected photos at a time.
● In the file manager input mode, you can enter name or memo for video,
RELEASE ALL : You can deselect the photos.
or set Protect or Lock.
SELECT ALL : You can select all photos in a folder(General, Favorite) at a time.
DELETE : You can delete the selected photos at a time.
DELETE ALL : You can delete all photos in a folder(General, Favorite) at a time.
Camcorder Preview mode ▶Press
recording ▶ Press
[OK] or
[Camera] Start the recording ▶Press
[STORE] ▶ File Manager input and Press
or
[Camera] stop the
[STORE]
DELETE : You can delete the selected photo.
DELETE ALL : You can delete all photos in the folder(General, Favorite) of the selected photo.
● Press
[CAMERA] to switch the phone from the camcorder mode to the camera mode.
● You don’
t need enter title and memo for every video to save. The title of the video is automatically entered.
3. Using Camcorder
Recording self-video
Using the built-in camcorder, you can record videos.
You can take the video of yourself while viewing the sub-LCD.
● Press
[CAMCORDER] to switch the phone from the camera
Hold down the press [Camera] while the folder is closed ▶
Select Camcorder and [Camera]
▶ Press [Camera] start the recording ▶Press [Camera] stop the recording
mode to the camcorder mode.
● If the phone is locked, the‘Camera Menu’is not displayed even if you press and hold [Camera] .
● If you take a self-video with the folder closed, the file is automatically saved in the
‘Video Player’
, not needing to press
[TOP MENU] ▶ Select Multimedia ▶Select Camcorder ▶Camcorder Preview mode
64
the Save button.
● The phone stops taking video if you open the folder, and moves to Main-Lcd preview.
65
Using Multimedia
Using
Using Multimedia
4. Using Video Player
[OPTIONS]
Size : You can check the video size.(176×144)
You can view video stored after taking them with a cellular camera phone.
Quality : Videos Recorden using a cellular camera phone look the
General : The videos recorden with the phone camera are automatically saved.
same on the phone, but they are different when sent via
Favorite : The videos recorden to‘Favorite’from‘Genera’are
displayed.
e-mail or download to PC. (Best, Good, Normal)
Memory : You can check the memory status of the phone.
Camcorder Preview mode ▶Press
[OPTIONS] ▶
Select a desired menu ▶
Select a value and press
[OK]
[TOP MENU] ▶ Select Multimedia ▶Select Video Player ▶Select General/Favorite ▶Select video and
Using Menu
● You can adjust the volume by pressing
Zoom : You can zoom in the scene to rdcord a video. (5 step : 1~5)
Bright. : You can adjust brightness of the photo. (10 step : 10~100)
Cont. : You can adjust contrast of the photo. (10 step : 10~100)
[PLAY]
while playing the video.
●If you play a video file in the Etiquette mode, the dialog box asking
‘Off etiquette?’is displayed on the screen.
●You can receive a call incoming during video playing. However, the phone will not return to the video play mode when the
call is finished.
Effect : You can select the effect of the photo. (Off, Negative, Solarize, Sepia, Mono)
● Description on the buttons used for video play
Camcorder Preview mode ▶
Select a desired menu ▶
Select a value
You can pause video playing.
You can resume video playing.
You can play a video repeatedly.
You can stop the video playing.
The phone returns to the previous mode after playing the video once.
Press this button once to rewind the video by 10 seconds.
Press this button once to fast forward the video by 10 seconds.
66
67
Using Multimedia
Using
Using Multimedia
DELETE : You can delete the selected video.
[OPTIONS]
DELETE ALL : You can delete all videos in the folder(General, Favorite) of the selected video.
5. Using MP3 Player
You can play and manage the mp3 files stored in the phone.
General : The downloaded mp3 files are automatically saved.
Favorite : The downloaded mp3 files to
‘Favorite’from‘Genera’
Select General/Favorite ▶Select Video list and Press
[OPTIONS] ▶
are displayed.
Select a desired menu
FILE MANAGER : You can modify‘Name, Protect, Lock, Memo’of the selected video with
‘File Manager’
Name : You can edit the name of a selected video.
Protect : You can protect a selected video not to delete.
Lock : You can set a selected video to lock.
MOVE : You can change location of the selected photo. (Favorite, General, User Folder)
ARRANGE : You can re-sort the photo list. (Time, Name, Memory Size)
SELECT ALL : You can select all videos in a folder (General, Favorite).
PLAY SELECTED : You can view the selected videos.
MOVE : You can move the selected videos to another folder(General, Favorite) at a time.
[TOP MENU] ▶ Select Multimedia ▶Select MP3 Player ▶Select General/Favorite ▶Select MP3 file and
[PLAY]
● You can send the mp3 files from the PC to the phone via the MPT tool. You cannot, however, send the files from the
phone to the PC.
● If the etiquette mode is activated, you cannot hear the sound when playing an mp3 file.
● More power is consumed when playing mp3 files one after another.
● You can download mp3 files unlimitedly depending on the capacity of the memory.
PROTECT/LOCK : You can set‘Protect/Loc’for
the selected videos at a time.
SELECT ALL : You can select all videos in a folder(General, Favorite) at a time.
RELEEASE ALL : You can deselect the videos.
DELETE : You can delete the selected videos at a time.
68
DELETE ALL : You can delete all videos in a folder(General, Favorite) at a time.
69
Using Multimedia
Using
Using Multimedia
DELETE : You can delete the selected mp3 files.
[OPTIONS]
DELETE ALL : You can delete all videos in the folder(General, Favorite) of the selected mp3 files.
Select General/Favorite ▶Select MP3 list and Press
▶
Select a desired menu and press
[OPTIONS]
6. Setting
[OK]
You can set the multimedia environment.
FILE MANAGER : You can modify‘Name, Protect, Lock, Memo’of the selected mp3 file with
‘File Manager’
Name : You can edit the name of a selected mp3 file.
Protect : You can protect a selected mp3 file not to delete.
Lock : You can set a selected mp3 file to lock.
MOVE : You can change location of the selected mp3 file. (Favorite, General, User Folder)
ARRANGE : You can re-sort the mp3 file list. (Time, Name, Memory Size)
SELECT ALL : You can select all mp3 files in a folder(General, Favorite).
PLAY SELECTED :
MOVE : You can move the selected photos to another folder(General, Favorite) at a time.
PROTECT/LOCK : You can set‘Protect/Loc’for
the selected mp3 files at a time.
SELECT ALL : You can select all mp3 files in a folder(General, Favorite) at a time.
RELEASE ALL : You can deselect the mp3 files.
DELETE : You can delete the selected mp3 files at a time.
[TOP MENU] ▶ Select Multimedia ▶Select Setting ▶
and ▶ Press
Select a desired menu ▶
Select a value
[STORE]
Camera Pre-Shutter : You can select the pre-shutter tone. If you have selected
‘Off’or if the phone is in the Etiquette mode,
the pre-shutter is deactivated.(Off, Pre-Shutter 1~6)
Camera Shutter : You can select the shutter tone. However, the shutter tone is not deactivated even if the phone is in the
Etiquette mode.(Shutter 1~3)
MP3 Continuance : You can select whether to continue playing mp3 files when you close the folder during playing mp3 files.
(Play on closing, Off on closing)
MP3 Music Skin : You can select the skin for
‘Mp3 Player’
.(Type 1~4)
DELETE ALL : You can delete all mp3 files in a folder(General, Favorite) at a time.
70
71
Using Multimedia
7. Vewing Memory Information
You can check the camera/camcorder data such as total memory, camera used, camcorder used and remain memory.
Using Voice Wizard
[TOP MENU] ▶ Select Multimedia ▶Select Memory Info ▶View Information
8. Vewing Help Information
You can check the description on the buttons for the camera/camcorder/MP3 Player function.
[TOP MENU] ▶ Select Multimedia ▶Select Help ▶
● In the help mode, pressing
72
will display the previous menu.
View Information
1. Ans. Machine
76
2. Using Voice Memo
78
3. Recorded Sound
79
Using Voice Wizard
Using Voice Wizard
1. Ans. Machine
Record Ment
You can record and use answer ment. And you can set comment to
‘Customized Ment’in‘Answer Ment Sel’
If you cannot receive a call, this mode switches the call to Ans. Machine.
● Press
[voice wizard] in the idle LCD to display the
Select Record Ment ▶Press
[RECORD] ▶ Ment Recording and
[STOP] ▶ press
[STORE]
● You can replay the record by selecting
‘Customized Ment’of‘Play Ment’
voice wizard menu.
● When new comment is recored, existed comment is deleted.
Play Ment
You can hear the Answer Machine announcement recorded in the phone. (Customized Ment, Normal Ment, Dirving Ment,
Meeting Ment, Class Ment)
[TOP MENU] ▶ Select Voice Wizard ▶Select Ans. Machine ▶Select a desired menu
Select Play Ment ▶
Set Answering
Ans. Machine : You can activate or deactivate the
‘Answer Machine’
Answer Ment Sel : If you activate the
‘Answer Machine’
, you can select the announcement.
(Customized Ment, Normal Ment, Dirving Ment, Meeting Ment, Class Ment)
Speaker : You can set the caller’
s message which is recorded in the Answer Machine
either to be heard or not on the speaker.
Select Set Answering ▶
Select a desired menu ▶
Select a value and Press
Select a ment and
[PLAY]
Message Inbox
You can hear the message recorded in the Answer Machine.
Select Message Inbox ▶
Select a message and
[PLAY]
● To delete a message, press
[OPTIONS] in the message menu, and select Delete menu(DELETE, DELETE ALL).
[STORE]
● The content recorded in the Ans. Machine can be played back using
‘Message Inbox’
● When a call is received, if you press and hold [voice wizard], you can set the answer machine.
74
75
Using Voice Wizard
Using Voice Wizard
2. Using Voice Memo
3. Recorded Sound
Voice Record is a function to recorded voice in idle mode.
You can record the sound you want and use it as ring sound.
● Press
[voice wizard] in the idle LCD to display the
● Press
voice wizard menu.
[TOP MENU] ▶ Select Voice Wizard ▶Select Voice Memo ▶Select a desired menu
[TOP MENU] ▶ Select Voice Wizard ▶Select Recorded Sound ▶Select a desired menu
Record voice memo
Recorded Sound
Select Record ▶ Press
[RECORD] ▶Voice memo Recording and
input and Press
[STORE]
● Pressing
[CANCEL] or
[STOP] ▶ Press
[STORE] ▶Name
to cancel the recording.
76
● Pressing
[CANCEL] or
[RECORD] ▶Record sound and
[STOP] ▶ Press
[STORE] ▶
[STORE]
to cancel the recording.
Play Sound
Play voice memo
You can check the recorded voices via‘Record’
Select a voice memo and Press
● To delete a message, press
Select Record Sound ▶Press
Name input and Press
● If a call is received while recording the voices before receiving are only recorded. You can check the recorded voices‘P
in LAY’.
Select Play ▶
[voice wizard] in the idle LCD to display the
voice wizard menu.
Select Play Sound ▶
[PLAY]
Select a sound and
[PLAY]
● You can lock the selected functions of the phone.
[OPTIONS] in the message menu, and select Delete menu(DELETE, DELETE ALL).
77
Using Security
1. Lock Phone
It is a function to lock the entire phone so that the others can’
t use it.
Using Security
1. Using Lock Phone
81
2. Using Lock Privacy
82
3. Lock Code
83
● Press and hold
● Even if you turn off the phone and then turn it on, it is still in lock mode.
4. PIN Set
83
5. Call Restrict
84
6. Using Reset
85
7. Viewing Emergency number
86
8. Viewing S/W Version
86
[TOP MENU] ▶ Select Security ▶ Select a Lock Phone and enter Lock Code ▶
Select a value and
[STORE]
● The factory-set default Lock code is
‘0000’to change the password, it can be changed in
‘Lock Code’
on the initial screen and then set the lock. You can answer a received call, even though your phone is locked.
● If you unlock the phone to use it, it is a temporary meansure. The refore, the phone returns to Lock Mode after you use it.
To reset the Lock mode completely, press hold.
and then enter your lock Code or set the setting value to
‘No’in Auto Lock mode.
79
Using Security
Using Security
2. Lock Privacy
4. PIN Code
Select a desired function to lock your phone partially so that the others can’
t use it.
● If you select a locked function, the password screen
You can set Yes/No of input of PIN number when you change PIN number or turn the power on.
Require PIN : You can set On/Off of input of PIN number.
is displayed. You can use the selected function only
PIN Change : You can change PIN number
when you have entered the correct password.
[TOP MENU] ▶ Select Security ▶Select a Lock Privacy and enter Lock Code ▶
Privacy and Press
[TOP MENU] ▶ Select Security ▶ Select a PIN Code ▶Select desired menu and enter Lock Code
Setting Lock
[STORE]
5. Call Restrict
3. Lock Code
You can restrict origination of a specific number. (Int’
l Call, Int’
l Call input, Outgo. Call)
You can change your lock code. The factory-set default Lock code ‘0
is 000’.
[TOP MENU] ▶ Select Security ▶Select a Lock Code and enter Lock Code ▶Enter New Code and
▶ Enter again and
[OK]
[OK]
[TOP MENU] ▶ Select Security ▶ Select a Call Restrict and enter Lock Code ▶
menu▶
Select a value and press [STORE]
Select a desired
● The phone manufacturer is not responsible for any damages caused by outflow of your lock code.
80
81
Using Security
Using Security
Int’
l Call
Reset setting Value
Use of an international call is restricted.
Select Int’
l Call ▶
Select a value ▶ Press
You can initialize the information stored in your phone such as information on basic display, ringer setting to the factory-set default.
[STORE]
Select Reset Setting Value and enter Lock Code ▶
Select a value and Press
[OK]
● You can use an easy key to display an international phone number when placing an international call.
● When entering an international phone number, if you press and hold
in idle mode, the entered number is displayed.
● If you have selected‘On’for Int’
l Call setup, enter the int’
l call code in the int’
l call input mode.
Select Clear Files and enter Lock Code ▶
Outgo. Call
Use of an outgoing call is restricted.
Select Outgo. Call ▶
Clear Files
You can delete the files selectively from the phone.(Phone Book, Call History, Message, Schedule, D-day, Alarm, Photo, Video, MP3)
[STORE] ▶
Select a value ▶ Press
Select a value and Press
Select a menu to deleting ▶
Select a value and
[OK]
[STORE]
7. Emergency Call
6. Using Reset
Even when the handset is in Lock, you can still make a call using the emergency number stored on the phone.
[TOP MENU] ▶ Select Security ▶ Select a Emergency Call and enter Lock Code▶Display the number
[TOP MENU] ▶ Select Security ▶Select a Reset ▶ Select a desired menu and enter Lock Code
82
● 4 emergency numbers are stored in the phone. The emergency numbers by the UIM Card.
83
Using Security
8. S/W Version
This feature displays the software version of your phone.
Using Settings
[TOP MENU] ▶ Select Security ▶Select a S/W Version and enter Lock Code ▶Information is displayed
84
1. Call Answer
86
2. Call Waiting
87
3. Call Forward
87
4. Change Language
91
5. Setting Auto Area Code
91
6. Data Mode
92
7. U-Mail Config
93
8. Browser Setup
94
Using Settings
Using Settings
1. Call Answer
2. Call Waiting
This function is to hold on the format call, and connect to later call, when user is on the telephone and, another call is being received.
[TOP MENU] ▶ Select Setting ▶ Select Call Answer ▶
Press
Select a desired menu ▶
Select a value and
[STORE]
[TOP MENU] ▶ Select Setting ▶ Select Call Waiting ▶Select a Value ▶Call Connecting & Call End
● In order to disable Call waiting, select
‘No’in the setup mode.
Answer
Any Key : Open the folder and press any keypad button except
to receive a call.
3. Call Forward
Folder : Open the folder to receive a call.
Auto Answer
If the folder is open or the earmicrophone is connected, connect tone is sounded for a given period of time and then the call is
connected automatically. When the folder is close, if the earmicrophone is not connected, you cannot use Auto Answer function.
● Off, In 3 sec, In 6 sec, In 9 sec
[TOP MENU] ▶ Select Setting ▶ Select Call Forward ▶Select a desired menu
86
87
Using Settings
Fwd All Calls
All calls(call connecting, power off, power on)connect a calling with set number.
Using Settings
4. Change Language
You can set a desired language to be displayed on your phone. (Chinese, English)
Select Fwd All Calls ▶Select‘Yes’to set up ▶ Enter the phone number ▶Call Connecting & Call End
● In order to disable Fwd All Calls, select
‘No’in the setup mode.
Fwd Default
When power off, connect a calling with set number.
Select Fwd Default ▶Select‘Yes’to set up ▶ Enter the phone number ▶Call Connecting & Call End
● In order to disable Fwd Default, select
‘No’in the setup mode.
Fwd If Busy
When call connecting, connect a calling with set number.
[TOP MENU] ▶ Select Setting ▶ Select Language ▶
Select a desired language and
[OK]
5. Setting Auto Area Code
If you set frequently-used area codes on the phone, they are inserted into a calling number automatically whenever you place a call.
Select Fwd If Busy ▶Select‘Yes’to set up ▶ Enter the phone number ▶Call Connecting & Call End
● If you enter a number beginning with
‘0’
, the area code is not
● In order to disable Fwd if busy, select
‘No’in the setup mode.
displayed, but only the number you entered is displayed.
(ex : cellular phone number, interational number, or other area code)
Fwd If NO ANS.
● You can enter the‘Area Code’only when you have selected
‘Yes’for
When user can not take a calling, if receving a calling, connect with set number.
‘Auto Area Code’
Select Fwd If NO ANS. ▶Select‘Yes’to set up ▶ Enter the phone number ▶Call Connecting & Call End
● In order to disable Fwd if no ans, select
‘No’in the setup mode.
[TOP MENU] ▶ Select Setting ▶ Select Auto Area Code ▶
● If area code has been set, opening the folder displays it. Pressing
● Pressing
88
Select a value and Press
or
[STORE]
moves you to the idle mode.
in the idle mode displays an area code. When this area code is displayed, enter a desired phone number.
● In other to disable Auto Area Code, select
‘No’in the setup mode.
89
Using Settings
Using Settings
6. Data Mode
7. U-Mail Config
You can use internet on the phone without additional modem, if you can connect your phone to a notebook or PC over
the wireless data cable.
● Cable connection
When you connect your phone to PC using data cable, an icon on your PC monitor
identifying data cable Connection status may disappear if the signal strength of link
in between the phone and a PC falls under a threshold value. This phenomenon may
happen if you use some of Dell PC models with a particular serial port.
[TOP MENU] ▶ Select Setting ▶ Select Data Mode ▶Select a desired menu
[TOP MENU] ▶ Select Setting ▶ Select U-Mail Config ▶Select a desired menu
U-Mail Sound
Set the arrival sound for U-Mail. (U-Mail Sound 1~7)
Data Profile
The data profile is menu for dial number setting when using UNI. (Wap, U-Magic, U-Mail, Mobile QQ, Porfile 5)
Setup
Enters frequently used e-mail address.
Use 1X Data
Function to use data server.
Yes : Can use 1x data. (In case of network which support 1x data)
No : Can use QNC data. (In case of network which don’
t support 1x data)
● Should use different connection type because SVC which the network of each region support is different.
Data Reset
You can reset Inbox & Outbox, Mail Setting and Reset Mail.
Inbox & Outbox : Reset inbox and outbox.
Mail Setting : Resets Mail setting.
Reset U-mail : Resets memory as well as mail setting.
Comm. Port
You can select the communication port for incoming data, If you change the communication port, the power gets On/Off.
If the handset is not rebooted automatically, press
90
. (USB, UART)
91
Using Settings
8. Browser Setup
Using Tool Kit
[TOP MENU] ▶ Select Setting ▶ Select Browser Setup ▶Select Linger Time ▶
Select a value and
[OK]
● If the phone fails to receive any action from you during the setting time while you are browsing, the uni cal lis disconnected and
the browser screen is maintained.(1~5 Min Later)
92
1. Using Biorhythm
96
2. Using Lucky Number
97
3. Using Calculator
97
4. World Time
98
5. Stopwatch
98
Using Tool kit
Using Tool kit
1. Using Biorhythm
2. Using Lucky Number
If you enter your date of birth, you can check your bio-rhythm on a specific date.
You can have the phone to select 6 random numbers between 1 and 49 whenever you want.
[TOP MENU] ▶ Select Tool Kit ▶ Select Biorhythm
▶ Select a desired menu
Set Biorhythm
[TOP MENU] ▶ Select Tool Kit ▶ Select Lucky Number ▶Press
[SELECT] and check Lucky Number
You must enter the correct date of birth. You cannot get the correct biorhythm if you don’
t enter your date of birth.
Select Set Biorhythm ▶
Setting User Birthday and
●In the Date setting mode, press
●To enter date, press
Press
[STORE]
3. Usign Calculator
[OK] to select a date from the calendar.
to switch the enter mode. Enter mode is switched in thesequence of
‘DAY ▶MONTH ▶ YEAR’.
toenter the appropriate date,year and month.
View Biorhythm
The phone shows your biorhythm of the day based on your date of birth.
Select View Biorhythm ▶User’s Biorhythm is displayed
● You can check by weekly or by monthly by Pressing
● Press
94
[WEEKLY/MONTHLY] while checking biorhythm.
[OK] in the biorhythm screen to road description on the biorhythm of the day.
[TOP MENU] ▶ Select Tool Kit ▶Select Calculator ▶Enter thecalculation formula using [Dial] ▶
Press
[OK] to check the result
● To reset the phone after you finish the calculation, press
● To enter a decimal point, press
95
Using Tool kit
Using Tool kit
4. World Time
5. Stopwatch
● To return to the previous display screen, press
● You can view other information if you press
[CANCEL] or
You can measure the time to your phone.
[OK] in the world
time mode.
[TOPMENU]
MENU]▶
▶Select
Select Tool
Tool Kit
Kit ▶Select
▶ SelectWorld
World Time
Time ▶Search World Time using
[TOP
Using
[OK]
[TOP
Select Stopwatch
[TOPMENU]
MENU]▶
▶Select
SelectTool
ToolKit
Kit▶
▶Select
World Time▶
to stop calculating time
[OPTIONS]
Information is display ▶Press
and press
[OPTIONS] ▶ Select a desired menu
SET DST : You can set the‘Summer Time’of the selected city.
DISPLAY : You can select a country and set the time of the country as the idle mode display.
● If you press
[START] to start calculating time ▶
[STOP]
[CONTINUE] when the stopwatch stops, you can keep measuring the time.
● All the records stored in the stopwatch are cleared and the stopwatch is ready to measure again, if you press [RESET]
on the standby screen.
● The stopwatch stops, if a call is received while the stopwatch is in opertation.
● It continues in external LCD when you close the folder during stopwatch opertaion.
● You can store up to 20 records by pressing
the middle record on the folder close, Press
96
[LAP], if the record is required with the stopwatch in operation. To store
[LAP].
97
Using Phone Book
1. Storing a Number
Storing a Number from a Menu
Using Phone Book
1. Storing a Number
105
2. Correcting Phone Book
110
3. Deleting phone Book
113
4. Searching Phone Book
115
[TOP MENU] ▶ Select Phone Book ▶Select Store Number ▶Select memory location where the number will be saved
Storing a Number on idle Mode
New Name : You can add entries to the Phonebook.
Add to Name : You can add a number to the existing entry in the
Phonebook, or can modify the entry.
Enter phone number in idle mode ▶Press
[STORE] ▶ Select memory location where the number will be saved ▶
Select save mode
99
Using Phone Book
Using Phone Book
[Setting Ringer tone]
1. Select Phone
Select Phone ▶ Press
Select the icon
‘
[STORE] after completing input information
● You can store up to 14 items and store them continuously by storing content in one item and then
selecting other items. To end storing, press
’in the phone number store mode to set a desired ringer. If no ringer is selected by phone number, the ringer
selected for the group is applied. If no specific ringer is selected either for the phone number or the group, the ringer selected in
[STORE].
‘Ringer’in‘Sound’is applied.
[Setting Graphic]
● Entering content to be stored with an item selected switches you to input mode.
● You can save up to 500 names on the phone.
Select the icon
‘
● To cancel storing, press
the graphic selected for the group is displayed. If no specific graphic is selected either for the phone number or the group,
or
during storing to switch to idle Mode.
’in the phone number store mode to set a desired graphic. If graphic is not selected for a phone number,
the‘Incoming Call’graphic selected in
‘Display’is displayed.
● Phone Book Icon
[Entering E-mail Address]
Name
E-mail
Group
Phone
Homepage
Home
Anniversary memo
Office
Others
Anniversary date
Fax
Ringer
Image
Memo
[Entering Name and Memo]
50 letters including E-mail symbols such as
‘@’and‘.’
can be inputted for an E-mail address. Press
[OPTIONS] during input,
select‘Symbo’
l, and then you can choose symbols for E-mail add input. In the English input mode, press
once to enter‘@’
twice to enter‘.’
, and three times enter‘(space’
).
You can store up to 8 chinese letter and 16 English letters for a name, and enter p to 64 chinese letter and 120 English letters for a memo.
[Entering Anniversary]
[Setting Group]
You can enter up to 10 Chinese or 20 English letters for the description of the anniversary. In the Date setting mode,
Select the icon
‘
’in the phone number store mode enables you to specify a group. The 5 default items such as Family, General,
Friend, Company, and Undefined are displayed.
press
[OK] and select the date from the calendar. To enter date, press
to switch the enter mode. Enter mode is
switched in thesequence of‘DAY
[Entering Phone Number]
You can enter up to 32 digits phone number, and up to 15 digits are displayed on the screen. Up to 32 digits of phone number can
be input and the display screen displays up to 15 digits. This feature enables you to set a main number when storing numbers
(Mobile, home, office and others).
100
101
Using Phone Book
Using Phone Book
Search All
2. Select UIM
This enables you to simply scroll numbers listed up in order of the phone number.
Select UIM ▶ Select Turbo Dial table ▶Press
[STORE] after completing
Select Search All ▶Select a list to search ▶The stored information is displayed
input information
● You can save a number per name on the UIM Card.
● The number of names saved in a UIM Card varies by the card.
● To cancel storing, press
or
during storing to switch to Wait Mode.
By Name
You can search a person by entering the name that you want to search.
Select By Name ▶ Enter a name ▶ Select a list to search ▶The stored information is displayed
● When a location is not entered, click
2. Searching Phone Book
[OK] to display the phone number list in order of location.
● If you enter the name to search in search window, all lists including entered name are displayed.
By Group
Groups are displayed in sequence of group and you can move to d desired group and search its phone number.
Select By Group ▶Select a group to search ▶Select a list to search ▶The stored information is displayed
By Turbo Dial
If there are numbers registered in
‘Turbo Dial’
, the numbers are displayed in the order of the
‘Turbo Dial' number.
[TOP MENU] ▶ Select Phone Book ▶Select Search ▶ Select a desired search mode
Select Turbo Dial ▶Select a list to search ▶The stored information is displayed
● You can search the‘Phone Book’with Search All, By Name, By Group, By Turbo Dial or By Number.
●You can save up to 200 numbers in‘Turbo Dial’
● When the‘Phone Book’list is displayed, the image of the selected
‘Phone Book’entry and the‘Main Number’is displayed on
●If you enter the location number in search window, all location number lists entered are displayed automatically.
the bottom of the LCD.
● If you press
on the idle mode,‘By Name’
,‘By Group’
,‘By Turbo Dial’list is displayed.
● If you enter the initial consonant of the name that you want to search on the initial screen, the names that begin with the entered
consonant are displayed.
102
By Number
If you press the number to search, you can search the phone number in which the entered number is inserted.
Select By Number ▶Enter a number ▶ Select a list to search ▶The stored information is displayed
● When a location is not entered, click
[OK] to display the phone number list in order of location.
103
Using Phone Book
Using the
Using Phone Book
3. Group Manager
[OPTIONS] functions while searching number
Stored number list display ▶Press
● If you Press
[OPTIONS] ▶ Select a desired menu
You can manage the group stored in cell phone.
on the idle mode.‘By Name’
,‘By Group’
‘By Turbo Dial’
list is displayed.
SEND SMS : If a mobile phone number is stored in the selected
‘Phone Book’entry, you can go to the text mode on the menu.
MAIN NUMBER : You can change the‘MAIN NUMBER’of the selected‘Phone Book’entry.
[TOP MENU] ▶ Select Phone Book ▶Select Group Manager ▶Select a desired group ▶Select a desired list
and
[OPTIONS] ▶ Select a desired menu
EXPORT : The selected phone number list is saved as
‘vCard’in‘Data Folder’
●You can select more than one phone number on the
‘Phone Book’list with the
TURBO DIAL : You can select a phone number in the
‘Phone Book’and register the number in
‘Turbo Dial’
DELETE ONE : Only selected phone numbers can be deleted.
DELETE MULTI : A list you want to delete can be selected or released with [SELECT.] Multiple phone numbers can be deleted all at once.
SELECT ALL : You can select all the
‘Phone Book’entries of a group.
DELETE RANGE : To delete multiple numbers, do not select the numbers one by one but select the range of the list you want to delete.
DELETE : You can delete the selected
‘Phone Book’entry.
Then the numbers within the range can be deleted all at once.
[SELECT].
MOVE : You can change the group of the selected
‘Phone Book’entry.
DELETE ALL : You can delete all the‘Phone Book’entries of a group.
DELETE ALL : The phone book can be deleted at once.
Phone : All numbers saved in the phone can be deleted.
UIM : All numbers saved in the UIM card can be deleted.
All : All numbers saved in the phone and the UIM card can be deleted.
104
105
Using Phone Book
Using
Using Phone Book
4. Turbo Dial
[OPTIONS] functions while searching grouop
●The 5 default items such as Family, General, Friend, Company, and Undefined
You can view and manage the‘Turbo Dial’numbers.
are displayed.
Select a desired group and
[OPTIONS] ▶ Select a desired menu
NEW GROUP : You can add a group in the
‘Phone Book’
.‘Group’can register up to 30 new name including existing group.
Name : You can change name of the selected group, if the group has been added by yourself.
To change the existing name and enter a new name, press
[TOP MENU] ▶ Select Phone Book ▶Select Turbo Dial ▶Viewing turbo dial list
●Press and hold the‘Turbo Dial’number on the main LCD to make a call.
EDIT GROUP : You can modify setting of the selected group.
to delete it and then enter the new name.
The default group names of Family, General, Friend, Company, Undefined are not changed.
Using
Select
[OPTIONS]
[OPTIONS] in the‘Turbo Dial’list to use various option menus.
ADD NEW : You can add a number to‘Turbo Dial’
Up to 8 Chinese letters and 16 English letters can be input for a group name.
MOVE TURBO : You can change the‘Turbo Dial’number of the selected
‘Phone Book’entry.
Ringer : The selected melody rings for the incoming calls if you have not downloaded a specific bell you have
CHANGE NUMBER : You can change the phone number registered in the
‘Turbo Dial’
selected in ringer style rings.
DELETE : You can delete the selected phone number from
‘Turbo Dial’
. However,
Image : The selected graphic is displayed for the incoming calls. When incomming call, Downloaded image, photo,
the number is not deleted from the‘Phone Book’
data folder image are available for a display.
DELETE ALL : You can delete all the phone numbers from
‘Turbo Dial’
DELETE ONE : You can deleted of the selected group, if the group has been added by yourself.
If group is deleted, the information stored in that group is moved to the Undefined group.
Select a desired list and
[OPTIONS] ▶ Select a desired menu
DELETE ALL : You can delete all the groups you have added. If group is deleted, the information stored in that group is moved to
106
the Undefined group.
107
Using Phone Book
Using Phone Book
5. Copy Number
6. Call History
You can copy and save the phone numbers stored in your phone and the UIM Card vis-a-vis.
● If you press
short‘Call History’list is displayed. To return to the
previous screen from the call list, press [CANCLE] or
● In the‘Call History’list, the name is displayed instead of the phone number
if the phone number is in the‘Phone Book’
. The same number of name is
displayed only once to avoid repetition.
[TOP MENU] ▶ Select Phone Book ▶Select Call History ▶Select a desired menu
[TOP MENU] ▶ Select Phone Book ▶Select Copy Number ▶Select a desired menu
● If you press
[OK] on a phone number, the call history list of up to 10 recent calls is displayed. Press
to dial the number.
UIM To Phone
Save phone number lists stored in UIM Card into the phone.
Select UIM To Phone ▶Select a desired menu
All : You can copy all the number from UIM card to the phone.
Select Copy : You can copy and save many phone number lists at a time.
All Calls
You can check the list stored in cell phone.
Incoming Call
Information on the received call is displayed. Up to 50 received calls are stored in the phone.
Multi-Select : You can copy numbers of phone numbers at a time.
Phone To UIM
Save phone number lists stored in the phone into UIM Card.
Select UIM To Phone ▶Select a desired menu
All : You can copy all the number from phone to the UIM card.
Outgoing Call
Information on the calling party is displayed. Up to 50 calling parties are stored in the phone.
Incoming Call
Information on the received call is displayed. Up to 50 received calls are stored in the phone.
Range : You can copy and save many phone number lists at a time.
Multi-Select : You can copy numbers of phone numbers at a time.
108
109
Using Phone Book
Using
Using Phone Book
[OPTIONS]
Latest Time
SEND SMS : You can go to the text mode, and send a message to the selected phone number.
STORE NUMBER : This menu is displayed if the selected phone number is not in the
‘Phone Book’
. You can save the phone number in the
‘Phone Book’
VIEW PBOOK : This menu is displayed if the selected phone number is in the
‘Phone
Book’. You can view the‘Phone Book’entry of the selected number.
DELETE/DELETE
ALL : You can delete selected number or all the numbers in the list.
Select a desired list and
[OPTIONS] ▶ Select a desired menu
You can view the air time of the last call.
Incoming Time
This mode displays the most recent call time.
Outgoing Time
The outgoing call time from service start to date is displayed.
Total Time
This mode displays the total call time from the start of service up to the present time. This total call time cannot be reset.
7. Call Timer
Roaming Time
This mode displays roaming call time placed by using other service provider’
s base station.
● Note
● The call time displayed on your phone is not consistent with real call time and fee. The fee is applied after the call is
really connected.
● You can initialize time information when you press
[TOP MENU] ▶ Select Phone Book ▶Select Call Timer ▶Select a desired menu
110
[RESET] while you are checking the information of total call time.
However, total call time cannot be reset.
111
Using Phone Book
8. Memory Status
You check available memory and used memory in Phone Book.
Using Functions During a Call
[TOP MENU] ▶ Select Phone Book ▶Select Memory Status ▶View information
9. View My Num
This mode enables you to confirm your own phone number.
[TOP MENU] ▶ Select Phone Book ▶Select View My Num ▶View information
112
1. Adjusting Tone Volume During a call 122
2. Taking Note During a call
122
3. Using Phone Book During a Call
122
4. Sending My number
123
5. Using Muting
123
6. Using Speaker Phone
123
Using Functions During a call
1. Adjusting Tone Volume During A Call
You can adjust the tone volume of a called party.
Using Functions During a call
4. Using Muting
2. Taking Note During A Call
You can enter a new phone number during a call and store it.
You can enjoy a private conversation during a call so that the called party cannot hear you.
Press
[MUTE] during a call
● To dear silence mode press
Press
during a call
Enter a phone number during a call and then
[OK]
● The phone number entered during a call is stored ‘Outgoing
in
Call’
3. Using Phone Book During A Call
Using Phone Book
You can search the phone book during a call.
You can search the‘Message’menu during a call.
Press
Press
114
[PBOOK] during a call
5. Using Speaker phone
You can receive, make calls without having to hold the phone to your ear.
Press
Using Message
[MUTE].
[SpkPhone] during a call
● When the mic faces you, it works at a distance of up to 30cm.
● Press
[SpkPhone] to disable the function.
during a call
115
Using SMS Features
1. Checking Message
Text Message
1. Checking a message
Using SMS Features
1. Checking Message
125
2. Sending Message
128
Check received message ▶Press
in idle mode ▶ Select Inbox ▶ Select Phone/UIM/Web Alert ▶Select
3. Setting Message Receive Function 131
Received text message and then press
4. Memory Status
133
● If a text message is received, the phone alerts you. (See p.131 Setting Message Receive Function)
5. Deleting Message
133
● Pressing
[OK] ▶ Check the message
to check a message enables you to check the next message.
● When the receiver number is displayed, pressing
connects a call.
● Basically, 100 unit Numbers can be stored. For more, it depends on UIM Card Capacity.
● Getting‘Web Alert message’
,‘
‘sign be displayed. And for SMS message,‘
’be displayed. After accessing the
message, then will be away.
● For message icon‘
’or‘
‘. It depends on the latest receiving message.
●‘Web Alert message’is available throuhgh uni. Read msgs mode, choosing web alert, be access to uni automatically.
117
Using SMS Features
2. Using
Using SMS Features
Voice Message
[OPTIONS]
Select message and
[OPTIONS] ▶ Select a desired menu
REPLY : You can send a reply to the person who sent you a message.
Check a received message ▶Press
FORWARD : You can deliver a received message to other persons.
● In order to delete a voice message, select the voice message and then, press [DELETE].
MOVE to UIM/PHONE : You can move the received message between the phone and the UIM.
● If multiple voice messages have been received, the latest received voice messsage is displayed.
SAVE ADDRESS : You can save the phone number of the message sender in Phone Book.
PROTECT : Protects selected messsages, which cannot be deleted.
in idle mode ▶ Select Inbox ▶ Select Voice Msg. ▶Check the Msg.
2. Sending Message
Sending a New Message
WHOLD COPY : You can copy contents of the selected message to
‘PASTE’
SELECT COPY : You can copy part of the selecte message to
‘PASTE’.
DELETE ONE : You can delete th seleted message only.
DELETE MULTI : You can delete numbers of messages at a time.
DELETE ALL : You can delete all the messages in the selected Inbox/UIM.
Press
in idle mode ▶ Select Create Message ▶Enter a Receiver number, content ▶Save message
Select setting ▶ Select Transfer mode and then press
118
[SEND]
119
Using SMS Features
Sending a Stored Message
Using SMS Features
1. Using
[OPTIONS]
You can send the save message as it is or after editing the message.
MOVE to UIM/PHONE : You can move the received message between the phone and the UIM.
DELETE ONE : You can delete th seleted message only.
DELETE MULTI : You can delete numbers of messages at a time.
DELETE ALL : You can delete all the messages in the selected Inbox/UIM.
Select message and
Press
in idle mode ▶ Select Outbox ▶Select Drafts/UIM ▶Select a message to send ▶Editor message
▶ Press
[SEND]
● You can send a message to numbers of receivers by entering numbers of the receivers. After entering a number, press
[OPTIONS] ▶ Select a desired menu
Using Sent Message
The sent messages are stored.
to move the cursor, and then enter the next number. After finish entering the number, press [OK]. You can send a
message to up to 10 receivers.
● If press
[FIND], you can select the mobile number in the Phone Book or Call History.
● If you have saved a message, you can select and send the saved message.
● Send fail list is created for the called number to which message are not sent.
● You can enter up to 70 Chinese letters or 160 English letters for a message.
Press
in idle mode ▶ Select Outbox ▶ Select Sent Msgs ▶Select a message
●Select a message, select
120
[OPTIONS] and press‘SEND’to resend the selected message.
121
Using SMS Features
Using SMS Features
3. My Phrase
4. Setting Message Receive Function
You can set the alert method when a message is received.
After saving your favorite sentences, it is available to recall saved sentences.
Press
in idle mode ▶ Select My Phrase ▶Select a desired list and
[EDIT] ▶ Enter the content and
● Regarding‘PHRASE’
, you can input maximum Chinese 40 characters or English 80 characters.
[OK]
Press
in idle mode ▶ Select Setting ▶
▶ Press
[STORE]
Select a desired setting menu ▶
Set the receive function
Preview : You can set a method of displaying a message when it is received.
Using
[OPTIONS]
Caller Number : The kind of message and callback number are displayed.
SMS : You can go to the text mode on the selected phone number in the list.
DELETE ONE : You can delete th seleted message only.
DELETE ALL : You can delete all the messages in the selected Inbox/UIM.
Full Message : The received text message is displayed on the initial display screen.
Off : Once a message is received, only the message received icon
‘
’is displayed.
Alert Frequency : You can set a desired reminder tone.
Once : If a message is received,‘beep’is sounded once.
Every 2Min : Alarm sounds every 2 minutes until the message is confirmed.
Select list and
[OPTIONS] ▶ Select a desired menu
Off : The reminder tone is not heard any more, but only the lamp flashes.
Receiving Sound : You can select a desired receive tone to be sounded when a message is received.(SMS Sound 1~5)
Save To : You can save the message either in UIM or Phone.(Phone, UIM)
122
123
Using SMS Features
5. Memory Status
The phone displays the free memory of Inbox, Outbox(Sent), Outbox(Draft) or UIM.
Using SMS Features
● Up to 50 IDs can be displayed in‘My Friends’of mobile QQ.
●‘
’is displayed for the off-line user, and
‘
● If there is any new message, the sender’
s icon‘
Using
’for the on-line user.
’blinks.
[MENU]
Select ID and Press
Press
[MENU]▶ Select desired menu
in idle mode ▶ Select Memory Status ▶Select a desired setting ▶The stored information is displayed
6. Using Mobile QQ
Current Buddy :
Send/Read Msg : You can read the message from a user, or send a message to the user.
After registration of user ID and password for the QQ messenger service, you can exchange messages with other cell phone or PC users
Buddy Data : You can view profile of a user.
who have subscribed to QQ service.
Chat Record : You can view the communication log with a user.
Del Buddy : You can delete a specific ID from
‘My Friends’
Buddy List : You can select a‘My Friends’icon displayed when you access the mobile QQ.
All Buddy : All IDs stored in‘My Friends’are displayed.
Online Buddy : Only the on-line IDs are displayed.
Find Buddy : You can search‘QQ service’users of a specific condition (Province, Age, Gender) and save ‘My
in Friends’
Press
in idle mode ▶ Select Mobile QQ ▶ Enter ID and Password ▶Select whether to save the ID and
Password ▶ press
124
[LOGIN] ▶ Check‘My Friends’stored in mobile QQ
125
Using SMS Features
Advanced Option :
System Msg : You can read the messages received from the server.
Add Buddy : You can enter a specific user ID and save in
‘My Friends’
Del Login Info : You can delete the ID and Password you have entered and saved at initial access to QQ.
Change Status : You can select your status displayed to the others.
Online : Your status is displayed as
“online”to the others.
Away : Your status is displayed as
“Away”to the others.
Invisible : Your status is displayed as
“off-line”to the others.
● You can receive a call during the Mobile QQ service. If the call ends within 10 minutes, the Mobile QQ service section
Using FAVORITES Menu
is resumed. The Mobile QQ service may be disconnected as the case maybe. If the call continues over 10 minutes, the
Mobile QQ service section is disconnected. In this case, you should access the service after the call. However, you
1. Sending E-mail
136
cannot receive a call during QQ in some area.
2. Checking New E-mail
140
3. Managing Data Folder
144
4. E-mail Setting
146
● You can display up to 97 Chinese letters, 297 English/Numberic figures on the phone. If the message is too long for the
LCD, the message part over 97 Chinese letters or 297 English/Numeric figures is displayed as
‘...’
● If you wish to read a message from an on-line user whose status is invisible, select All Buddy in the Buddy list, and
select the user.
● If you select Change Status in QQ, your status is shown to all the users and not to a specific user only.
126
Using FAVORITES
Using FAVORITES
1. Using Mail
1. Entering a recipient
Select To and press
[MENU] ▶ Select Menu
Addr Book : Displays the address book allowing you to select a recipient.
Sent History : Displays the sent history allowing you to select a recipient.
Addr Group : Displays the address group allowing you to select each recipient group.
Profiles : Add your e-mail address entered for Server Setup.
Move to Cc : Changes to Cc.
[TOP MENU] ▶
Move to Bcc : Changes to Bcc.
[FAVORITES] ▶ Select Mail ▶ Select a desired menu
● Press
Sending New Mail
[OPTIONS] to enter the optional information on e-mail address.
● You may enter lots of e-mail addresses within 640 characters including
‘@’
,‘.’etc.
● You can check the remaining number of characters at the top of the LCD monitor.
2. Entering E-mail title
Select Subj ▶ Enter Subject ▶ Display Subject
● Press
Select New Mail ▶Enter a recipient ▶ Enter a title ▶ Attach a file ▶ Enter e-mail contents and
[SEND]
[OPTIONS] to enter e-mail title using SYMBOL or PASTE.
● For subject input you can use a maximum of 50 Chinese characters and 100 English characters.
3. Attaching a file
Select Attach ▶ Select Folder▶ Select an attached file ▶
▶ Press
128
[OPTIONS] ▶ Select ATTACH ▶ Select set value
[OPTIONS] ▶ Select Done
129
Using FAVORITES
● Choose Select from
Using FAVORITES
1. Using send Box menus
[OPTIONS] to check attached files.
● Up to five files within 100Kbyte can be attached at a time.
Select e-mail ▶
[MENU] ▶ Select desired menu
● The moving image file within look byte can be afttached to the mail.
● If you press
Edit : Enables you to edit e-mail before sending.
[OK] when selecting a file, you can preview the selected file.
Protect ON/OFF :
4. Entering e-mail contents
Delete :
Delete Selected : Removes lots of selected e-mails at a time using
Select Body ▶ Enter e-mail contents ▶Display e-mail contents
● Press
Enables you to select lots of e-mails simultaneously for protection.
Delete 1 : Removes the only selected e-mail.
Delete All : Removes all e-mails from Send E-mail.
[OPTIONS] to enter e-mail contents using SYMBOL or PASTE.
● For e-mail contents input, you can use a maximum of 5000 Chinese Characters and 10000 English characters.
● Those e-mails already sent or fail to get sent are stored in
‘Send Box’
Sort :
Date/Time : The latest e-mails stored in Send Box appear first.
Not Sent : E-mails not sent have a priority.
Recipient : Sort by recipient.
Title : Sort by title.
Sending stored e-mails
Protect : Protected e-mails have a priority.
Show Full Addr : Allows you to check all addresses of senders, receivers, Cc, Bcc, etc.
Copy Mail Body : Enables you to use e-mail contents stored in Quick Note using
[OPTIONS].
1-In/3-In View : Allows you to set display method of e-mail stored in Send E-mail.
1-In View displays e-mails within a line, and 3-In View within three lines.
Press
130
in idle mode ▶ Select Send Box ▶
Select Send E-mail ▶
[DISPLAY] ▶
[SEND]
131
Using FAVORITES
Using FAVORITES
Using Sent Message
2. Using the e-mail menu
[Using E-mail menu]
Select e-mail and
[MENU] ▶ Select desired menu
Rcv Selected : If you receive e-mail of which title and sender only are selected, you may receive the entire e-mail again.
Protect ON/OFF :
Delete :
Select Check New Mail ▶Select Inbox ▶ Select folder▶
Select e-mail and
Enables you to select lots of e-mails simultaneously for protection.
Delete 1 : Removes the only selected e-mail.
Delete Selected : Removes lots of selected e-mails at a time using
[DISPLAY] ▶ Check new e-mail
Delete All : Removes all e-mails from received E-mail.
1. Using the folder menu
Select a desired folder and
Sort :
[MENU] ▶ Select desired menu
Add Filter : If you receive e-mail of which address is stored in a specific address folder in advance, the e-mail is
stored in a specific folder not in MainBox. Maximum of 5 e-mail addresses can be stored in a folder.
However, it is impossible to store e-mail address in MainBox.
Edit Folder Name : Modifies folder name.
Re-Filter : Applies the filter from Add Filter.
Delete All : Removes all received e-mails
Reset Folder : Resets the folder.
132
Rcvd At : The latest received e-mails appear first.
Unread/Unreceived : Unread, unreceived e-mails have a priority.
Sender : Sort by sender.
Title : Sort by title.
Protect : Protected e-mails have a priority.
Move To Folder : Moves the selected e-mail to other folder.
Show Full Addr : Allows you to check all addresses of senders, receivers, Cc, Bcc, etc.
1-In/3-In View : Allows you to set display method of e-mail stored in Inbox.
1-In View displays e-mails within a line, and 3-In View within three lines.
Copy Mail Body : Enables you to use e-mail contents stored in Quick Note using
[OPTIONS].
133
Using FAVORITES
Using FAVORITES
[E-mail address menu]
Check new e-mail ▶
SMIL Editor
Select e-mail address ▶
[SELECT] ▶Select menu
Select SMIL Editor ▶Select desired menu
New Mail : Sends new e-mail to the selected e-mail address.
Add to Addr Book : Adds the selected e-mail address to address book.
Add Filter : Adds the selected e-mail address to folder filter you want.
Add to Reject List : Adds the selected e-mail address to the reject list.
Copy Mail Addr : Not support function.
1. New SMIL
An MMS file to be attached to E-mail can be created.
3. Replying/Forwarding e-mails
Check new e-mail ▶
[MENU] ▶ Select Reply/Reply All/Forward ▶Enter e-mail ▶
Select New SMIL ▶ Select Add New SLIDE and
[SEND]
▶
Reply : Replies to a sender.
[EDIT]
Select desired menu
● Up to 5 slides can be created in an MMS file. However, only one
Reply All : Replies to a sender and other Cc.
image, text and audio data can be inserted per slide.
Forward : Forwards the received e-mail to others.
[Insert Image]
The selected image can be inserted.
Select please Insert Image and
Select‘Yes’and press
134
[EDIT] ▶ Select Image data ▶
[OPTIONS] ▶ Select DONE ▶
[OPTIONS] ▶ Select ATTACH ▶
[OK]
135
Using FAVORITES
Using FAVORITES
[Edit Text]
E-mail Setting
Input mms text.
Select Mail Settings ▶Select desired menu
Select please Edit Text and
[EDIT] ▶ Enter SMIL Text and press
● You can use‘EDIT’and ’
PASTE’if you select
[OK] ▶
[OK]
[OPTIONS] while entering SMIL. (See P.53~54)
[Insert Audio]
Insert audio(mmf, mid etc)
Select please Insert Audio and
Select‘Yes’and press
[EDIT] ▶ Select Audio data ▶
[OPTIONS] ▶ Select DONE and
1. Receiving & View Setting
[OPTIONS] ▶ Select ATTACH ▶
[OK]
Select Receiving & View ▶ Select menu
2. Open SMIL
Auto-Rcving : Sets auto e-mail check without using check new e-mail.
The saved MMS data can be opened and edited.
Rcving Type : Set e-mail receiving type.
Receive Atchmnt : Set receiving enviroment for attachment. Press
[DETAIL] to set receiving capacity for
‘Image, Melody, Voice, Animation, vCard’attachment. Note that the each size of the attached file
does not exceed 137Kbyte.
Play Atchmnt : Previews attachment every 2 second, if it is set to
‘On’
Show Folders : You can display/hide the user folder when you retrieving mails ‘I
in nbox’.
Font Size : Change e-mail font size.
Select Open SMIL ▶
136
Select desired Slide and
[OK] ▶ Check the data and edit it ▶
[OK] ▶
[OK]
137
Using FAVORITES
2. Send & New Mail Setting
Select Send & New Mail ▶Select menu
Quote Original : Sets whether to display the existing e-mail in using e-mail reply function.
Addr Group : Modifies address groups.
Using FAVORITES
2. Accessing Magic
Your device allows you to download applications from the internet written in Magic(J2ME) and allow you to install
and execute them on your device. These applications could be messaging, animations, productivity tools or games.
Accessing Magic
Encoding Type : Set e-mail character encoding method.
Del Sent History : Deletes sent history.
3. Register Account Setting
Select Register Account ▶Select menu
Register : Registers e-mail account entered for server setup.
Cancel Account : Cancels the registered e-mail account through wqp.
[TOP MENU] ▶
[FAVORITES] ▶ Select Magic ▶ Accessing Magic
4. Others
Select Others ▶ U-Info connect
● Cannect Mail uni administrations site.
5. View Mail Settings
Select View Mail Settings ▶Information is displayed
Magic MENU
Select the Magic ▶
[MENU] ▶ Select a desired menu
Make Folder : You can create a new folder.
System Info : You can view information on the Magic program.
Registry : Sending registration message completed.
6. About
Select About ▶ Information is displayed
● The version and other information for Mail can be confirmed.
138
139
Using FAVORITES
Using FAVORITES
Key usage in Magic
● For connecting to the download server. both Data Profile of the phone’
s main menu and the Profile(s) in U-magic’
s Wireless Setup menu
The key usage in Java is similar to normal user interface of the phone. The followings are the key usage in Java.
and
: You can press the softkeys located at the bottom of the screen in Java by pressing
you want to press is located on the left side, you should press
on the right side, you should press .
: You can execute the application you want by pressing
and
should be set up properly. For setting Data Profile, you should enter
‘Setting →Data Mode →Data Profile’from the phone’
s Main Menu and
. If the softkey
. If theSoftkey you want to press is located
. You can also download an application or go into a directory
keys are used as direction keys.
Download Magic applications
2. Highlight the application you want to execute by using
[MENU] )
will not be responsible for any damage or loss due to this kind of incident.
● If there is an incoming call during sound play in U-magic application such as Karaoke, the sound might not resume after hanging up, In
this case, you might have to end restart the application.
[UNI] softkey. Then the phone tries to connect the server.
6. The phone displays the applications(applets) and the folders of the server. If you want to download an application, you should
highlight if first by using
. Then the application starts. You can also do it by pressing Menu softkey and selecting
‘2. Execute applet’
● When using the network and accidentally downloaded a virus intected software which leads to the malfunctioning of your V3a, Motorola
[Select] again)
4. Select whichever server you want to connect from the server list. First, You should highlight the server you want to connect by
using
Execute Magic applications
3. Press
3. Select‘5. Download’from the menu by pressing Select softkey.(
5. Press
and fill in appropriate values for Profile name, Host name, Port, Default path and so on.
1. Enter Java by selecting‘Magic’from the Shortcut menu.
1. Enter Java by selecting Magic in UNI menu.
2. Press Menu softkey. (You can do it by presssing
profile used in U-magic you should enter
‘U-magic Menu →Wireless Setup →Select ISP’and select one data profile you want to use.
For setting Profile(s) in U-magic’
s Wireless Setup, you should enter‘U-magic Menu →Wireless Setup →Profile →Profile x’
while being connected to the download server. It might be used as fire key in game applications.
fill in appropriate values for Profile Name, Dial in number, user name and password. Only profile 5 is editable by user. For selecting Data
, And then you can start the download sequence by pressing
[UNI].
7. If the download start successfully, the phone will display information of the application. In the information screen, you should
3. Using Info
[TOP MENU] ▶
[FAVORITES] ▶ Select Info ▶
Select a desired menu
press Download softkey. Then the phone downloads the application and displays
‘Installation Successful’when it is successful.
8. If you want to go into a directory, you can do it by highlighting and pressing . similar to the case of applications.
140
141
Using FAVORITES
Using FAVORITES
FILE INFO : You can view Name, Path, Type, Size, Data and copyright of the selected file.
4. Using My Documents
Data Folder provides users with the efficient functions that manage the contents downloaded by uni, attached to Mail or the
contents are made from camera and recorded. Data Folder have several folders are based on different categories Display All,
User Folder, My Data, Umedia, Picture, Ringtone, SMIL, vCard, Others.
ATTACH : You can attach files to Mail.
RENAME : You can change the data name. You can enter up to 12 Chinese letters or 24 English letters as the data neme.
DELETE ONE/DELETE ALL : Deleted selected data.
User Folder
User Folder offers user to make folder and manage the files moved from other folder.
[TOP MENU] ▶
[FAVORITES] ▶ Select My Documents and Enter LOck Code ▶Select a desired folder
Display All
Display All shows the total list of files that contained in User Folder, My Data, Picture, Ring, UMedia, vCard and Others.
Select User Folder ▶Select Folder or Data ▶
[OPTIONS] ▶ Select a desired menu
MOVE : You can move files between the folders.
MAKE FOLDER : You can create up to 10 folders inside User Folder. Up to20 English characters or numeral digits can be used
as a folder name.
Select Display All ▶Select a data ▶
142
[OPTIONS] ▶ Select a desired menu
143
Using FAVORITES
Using FAVORITES
My Data
Picture
Select My Data ▶ Select My Photo/ My Video/ My Audio/ My Record
User can manage picture files from Mail, UNI.
My Photo : In My Photo folder, user can manage all photo files taken by phone camera.
My Video : In My Video folder, user can menage all video files that taken by phone camera.
My Audio : You can check the mp3 files downloaded via the phone from
‘My Audio’in the‘My Data’menu of the‘Data folder’
My Record : In My Record folder, there are all Recorded Sound, Recording Note. User also can manage Recorded Sound
and Recording Note.
Select Picture ▶ Select a Data and press
[OK] ▶ Press
[OPTIONS] ▶ Select a desired menu
1 Pixel/ 5 Pixel/ 10 Pixel : Move the area of picture with that unmbers of pixel.
Add One : You can copy a file to Graphic Mode in Display, and set the graphic display for Idle Mode, Power Off or In
Calling with the file.
Umedia
Full Edit : Operation for files JPG, BMP, PNG types except small range sized file, in this case pop up window will
appear‘Image size is not full’
Edit : Edit is also wallpaper operation for picture file but you can choose the displayed part for wallpaper
will
operate to select the wallpaper area.
● You can full edit or edit the still pictures but not the moving pictures.
Select Media ▶ Select a Data and
[OK] ▶
[OPTIONS] ▶ Select a desired menu
● You can save animations, games, karaokes and video files downloaded from UNI.
● You can copy the selected animation or video file Graphic Mode by selecting
‘Add One’
144
145
Using FAVORITES
Using FAVORITES
Ring
vCard
User can manage sound files from Mail or UNI.
Select Ring ▶ Select a Data and
[OK] ▶
User can manage vcard files that exported from phone book.
[OPTIONS] ▶ Select a desired menu
● Add Bell : You can copy a file to Music Bell in Ringer Style, and set the ringer with the file.
Select vCard ▶ Select a Data and
● If you press
[OK] ▶
[OPTIONS] ▶ Select IMPORT
[OPTIONS] in the Phone Book list and select
‘EXPORT’
, the selected phone number list is saved as
‘vCard’
in‘Data Folder’
SMIL
Other
The MMS data saved in the phone can be managed.
Select SMIL ▶ Select a data ▶
146
User also can message undefined files that not supported by phone.
[OPTIONS] ▶ Select a desired menu
147
Using FAVORITES
5. Using Music Street
The corrensponding number of‘Order Music’
,‘SMS Cart’
,‘Music companion’shall be preset in the MS by manufactures. The number
of‘Order Music’is 10155; The number of
‘SMS Cart’is 10158; The number of‘Music companion’is 10159.
Using FAVORITES
7. Accessing UNI
You can access and navigate the internet through the uni browser.
Accessing UNI
Press
●‘
[TOP MENU] ▶
[FAVORITES] ▶ Select Music Street ▶Select a desired menu
6. Using Bookmarks
View information of Bookmarks.
[UNI] in idle mode Accessing UNI
’displayed on the LCD while you are connected to UNI.
UNI MENU
You can set UNI environment for convenient. (On-line UNI menu)
Accessing UNI ▶
[MENU] ▶ Select desired menu
Homepage : enables you to go to the top site.
History : allows you to check the site recently accessed.
Bookmarks : allows you to access your favorite sites.
Push Message : UNI browser version info.
Refresh : Setup or modify the browser configuration.
Save Page : Stored Page (Maxi 3).
Save Item : Stored Image (Maxi 3).
[TOP MENU] ▶
148
[FAVORITES] ▶ Select Bookmarks ▶View information
Go To URL : allows you to go to the site you want to access via direct input of URL.
Advanced : enables you to go to the top site.
149
Appendix
1. Troubleshooting
● Nothing displayed on the display screen
- Check the battery pack state.
● No antenna graphic displayed on the display screen
- Move to other place and attempt a call again.
Appendix
● Alarms‘Toot-too’heard
when a call is placed
- There is no communication channel available or difficulty in communication with the base station. If you press
end the connection and then press again,
1. Troubleshooting
152
2. Specific Absorption Rate data
153
3. Specification and Characteristics
155
to
the phone will redial up.
● Charging lamp on the charger flashes in red
- Check the location of the battery pack or clean the charging terminals and then attempt a call again, If the lamp keeps
flashing in spite of several attempts, contact the nearest Motorola service center.
● Battery pack operating time is different from the explanation in the User’
s Manual
- If you charge and discharge the battery pack continuously, its operating time becomes shorter gradually. If the charged
battery pack is exposed to low or high temperature, its operating time may very.
● Malfunctions detected during using the phone or no power ON
- Remove the battery pack and reinstall it, and then turn the power ON.
151
Appendix
2. Specific Absorption Rate data
Appendix
● According to the SAR guideline of ICNIRP, SAR limitation of mobile phone is under 0.75 W/kg per 10g
of human body.The above figure for SAR limitation secures definitely the safety zone for end user and
The model phone meets the government's requirements for exposure to radio waves.
also measuring tolerance also considered on it.
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for
● CENELEC is one of European associations
exposure to radio frequency(RF) energy. These limits are part of comprehensive guidelines and establish permitted
● All the reference for this mobile phone does not define the range of Motorola's test procedure and
levels of RF energy for the general population. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation of scientific studies. The guidelines
measuring method and evaluation.
include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption
Rate, or SAR. Under the guidelines for your phone model, the SAR limit is 1.6W/kg. Tests for SAR are conducted
using standard operating positions with the phone transmitting at its highest certified power level in all tested
3. Charging Note
● A USB-cable connection to a personal computer will not charge your phone’
s battery when the phone is turned off.
Turn on the phone to charge the phone’
s battery through the USB connection.
frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the phone
while operating can be well below the maximum value. This is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach the network. In general, the closer you are to base station,
the lower the power optput of the phone.
Before a phone model is available for sale to the public, it is tested to confirm compliance with the guidelines.
● When your phone’
s battery is dead or has a very low charge, you must use the phone’
s travel charger to recharge
the battery. You cannot use a USB-cable connection to a personal computer to charge a weak or dead phone battery.
● You cannot use MPX-200 phone chargers to charge a weak or dead phone battery. Instead, use the travel charger
included with your phone.
The tests are performed in positions that conform to a uniform testing methodology determined by an expert
standards body. The highest SAR value for this model phone when tested for use at the ear is 0.606 W/kg.
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the governmental requirements for safe exposure. Please note
that improvements to this product model could cause differences in the SAR value for later products;
in all cases, products are designed to be within the guidelines.
152
153
Appendix
3. Specification and Characteristics
Service Frequency
Range
Transmit(TX) : 824MHz~849MHz
Receive(RX) : 869MHz~894Mhz
Frequency Stability
±300 Hz
Exterior(mm)
Weight(g)
Transmission Output
Mounted with battery : 53 X 98 X 14.5
Mounted with battery : 98g
250mW
Operating Temperature -20℃ ~ +50℃
Relative Humidity
154
95%

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat PDFWriter 4.05  for Power Macintosh
Create Date                     : 1904:02:26 11:54:40Z
Modify Date                     : 2007:03:05 17:08:04-06:00
Metadata Date                   : 2007:03:05 17:08:04-06:00
Creator Tool                    : QuarkXPress(MAC)
Format                          : application/pdf
Creator                         : Seo Hyun Jeong
Document ID                     : uuid:483fd825-b3a8-4cf3-832b-da714af9bb84
Instance ID                     : uuid:3ac04f89-f3d8-44f7-ab14-5a1eee6402c7
Has XFA                         : No
Page Count                      : 81
Author                          : Seo Hyun Jeong

EXIF Metadata provided by EXIF.tools