Motorola Mobility T6FM1 Portable PCS GSM Transceiver with Bluetooth User Manual Scorpius E

Motorola Mobility LLC Portable PCS GSM Transceiver with Bluetooth Scorpius E

Exhibit 8B Users Manual

52Making/Answering CallsMaking CallsMaking Calls........................................................................................................54Calling the Same Party Again<Dialed Calls> ...................................................56Redialing Automatically<Auto Redial>.............................................................58Showing/Hiding Caller ID for Each Call<186/184> ...........................................58Sending Push Signals QuicklyMaking International Calls<WORLD CALL>.....................................................60Making a Call by Specifying a Sub Address<Sub Address>..........................63Warning with Display and Alarm when a Set Period Elapses during a Call<In-Call Timer>....................................................................................................64Talking Using Handsfree....................................................................................64Talking in a Car, Hands Free<In-Car Handsfree>.............................................64Talking via Bluetooth..........................................................................................65Answering a CallReceiving a Call ..................................................................................................65Answering a Call by Pressing a Dial Key<Multi-key>......................................67Answering a Call by Opening the Handset<Open to Answer>.......................67Using Received Calls<Received Calls>............................................................67Adjusting the Other Party's Volume during a Call...........................................68Adjusting the Ringtone Volume ........................................................................69Saving Power Consumption during a Call<Power Setting> ...........................69
53When You are/were Unable to Answer CallsPlacing a Call on Hold When You Cannot Answer the Call ............................69Setting the Response Hold Tone<Response Hold Tone> ...............................70Placing a Call on Hold........................................................................................71Setting the Answer Hold Tone and Image<Answer Hold> ..............................71Using Public Mode (Drive Mode)<Public Mode (Drive Mode)>.......................72Using Public Mode (Power Off)<Public Mode (Power Off)> ............................73Checking Missed Calls.......................................................................................74Recording of Voice/Video-clip Message from a Caller when You Cannot Answer a Call<Answering Machine> ................................................................75Playing/Deleting Record Message ....................................................................77
54XXXXXMaking/Answering CallsMaking CallsaEnter a phone number• Enter up to 80 digits. If you enter more than 27 digits, only the last 26 digits are displayed.• Start from the area code even for a local call.•i [Register] : Go to Step 2 (P95) in "Saving Contacts to Phonebook from Received Calls or Dialed Calls".■To make a call to a general phoneArea Code − City Code − Phone Number■To make a call to a mobile phone090−XXXX−XXXX/080−XXXX−XXXX■To make a call to a PHS070−XXXX−XXXXbo/cStart talking when the other party answers.•i [Swap]: Calls up another function such as Phonebook. →P226•0 to 9: Sends push signals (DTMF).cp to terminate the call• If you hear the Caller ID Display Request service voice prompt, make a call again sending the Caller ID.■To correct an entered phone numberTo delete an entered digit, use a to move the cursor to the right of the digit and press C.To add a digit, use a to move the cursor to the position and enter the digit with the dial keys.■Screen display during dialingThe other party's name appears if the party is saved in the Phonebook. However, when a call is made to a party that has been saved as secret by setting "Secret Data" to "Hide", the phone number is displayed. (Checking the specifications)The Function Menu on the Phone Number Entry ScreenaPhone number entry screen (P54) yh [Function] y Perform the following operationsAttach NumberEnter the phone number referring to the phonebook or Dialed/Received Calls.InsertEnters "p", "w", or "n" at the cursor location. →P59Caller IDMakes a call after setting to show/hide the Caller ID. →P58PhonebookDialed CallsReceived Calls: Select the phonebook entry and press h [Select].: Select a history and press h [Select].: Select a history and press h [Select].Phone number entry screenTalking screen
55Making/Answering Calls XXXXXVideo CallMakes a video call to the entered phone number.Send MessageThe entered phone number becomes the destination.Compose and send a mail. →P172Multi NumberSelect a number to use for Caller ID when making calls. →P251Add Intl Access No.Adds an international access number at the beginning of the entered phone number. →P61Add Country CodeAdds a country code at the beginning of the entered phone number. →P270Insert(Checking the specifications)Editing FunctionUses the edit functions. →P261Cancel EntryCancels storing. (Checking the specifications)• Selecting "New Call" from the function menu during a call will bring up the phone number entry screen with "Browse" displayed. (Checking the specifications)• Selecting "New Call" from the function menu during a call to make a video call, will display a confirmation whether to dial after disconnecting the current call. Pressing h [Yes] terminates the current call and makes a video call to the newly dialed phone number.The Function Menu on the Talking ScreenaTalking screen (P54) yh [Function] y Perform the following operationsMuteTurns off the sound.UnmuteCancels Mute.Spkrphone OnSwitches the sound source to the speaker to perform a Handsfree call.Spkrphone OffCancels the Handsfree call.My Personal InfoDisplays your phone number.HoldPlaces the call on hold.Use Bluetooth• Searches and connects to a registered Bluetooth headset, etc. (Checking the specifications)New CallPlaces the active call on hold and makes another call. →P248Attach NumberVideo CallContinued on the next page
56XXXXXMaking/Answering CallsDialed CallsOpens the Dialed Calls list.Received CallsOpens the Received Calls list.Other InformationDisplays other information. →P242 (Checking the specifications) Dialed CallsCalling the Same Party AgainUp to XX entries can be saved in the Dialed Calls for both voice calls and video calls. A phone number, dialed date and time, ringing duration, and show/hide Caller ID are saved in the Dialed Calls.• If there are more than XX entries, the oldest entries will be overwritten first.• Calling the same phone number overwrites the entry of the latest called date and time.ar• The other party's name appears if the party is saved in the Phonebook.bSelect an entry ycco/tThe phone number entry screen opens with the phone number entered.do/c• Press c to make a call in the same way (voice/video call) as the entry.■To make a video callPress t.• You can also make a call by selecting an entry on the Dialed Calls list and performing Step 3 and subsequent steps.• If the call was made using an additional number of Multi Number, the icon registered to the number is displayed. (Checking the specifications)• Calls made to a party saved as secret while "Secret Data" is set to "Hide", or a party whose calls are set to be rejected in Phonebook are displayed as "Private" on the Dialed Calls list or Dial Calls detail screen.• Calls made to parties who are not saved in the Phonebook are displayed as "Name unknown" on the Dialed Calls detail screen.Dialed Calls listDialed Calls detail screen
57Making/Answering Calls XXXXX■Icons on the Dialed Calls list (Checking the specifications)The following icons indicate types of calls: $★$: Voice Call　$★$: Video Call　$★$: Dialed Call　$★$: Missed Dialed Call　$★$: Number1　$★$: Number2• Dialed calls made to parties saved in the Phonebook have icons saved under "Type".The Function Menu on the Dialed Calls List and Dialed Calls Detail ScreenaDialed Calls list (P56)/Dialed Calls detail screen (P56) yh [Function] y Perform the following operationsStoreSave a phone number from a call log to the Phonebook. Go to Step 2 (P95) in "Saving Contacts to Phonebook from Received Calls or Dialed Calls".Video CallMakes a video call to the phone number in the history.DeleteDeletes the selected/displayed entry.yh [Yes]Delete AllDeletes all entries from the Dialed Calls.yh [Yes]Caller IDSets to show/hide the Caller ID.y "Show ID"/"Hide ID"Send MessageCreates and sends a new mail with the phone number in the Dialed Calls. →P172Add DigitsThe phone number entry screen opens with the phone number in the history entered. Go to Step 2 in "Making a Call" (P54).Attach NumberMulti NumberSelect a number and make a call. →P251Copy All TextCopies all text on the Dialed Calls detail screen.Calling the Last Dialed NumberYou can open the phone number entry screen with the last dialed number entered to make a call easily.acy $★$ (Accessories) y "Recent Calls" y "Notepad"The phone number entry screen opens with the phone number entered.bo/c• Press c to make a call in the same way (voice/video call) as before.PhonebookDialed CallsReceived Calls: Opens the Phonebook list.: Opens the Dialed Calls list.: Opens the Received Calls list.Continued on the next page
58XXXXXMaking/Answering Calls■To make a video callPress t.Auto RedialRedialing AutomaticallyYou can set the handset to redial automatically when a call was not connected due to a busy line, etc. (Checking the specifications)acy $★$ (Settings) y "General Settings" y "Auto Redial" y "On"/"Off"186/184Showing/Hiding Caller ID for Each CallThere are 2 ways to show/hide Caller ID for each call: adding "184"/"186", or using the function menu on the phone number entry screen.Showing/Hiding Caller ID by Adding 184/186aEnter "184"/"186" y enter the phone number■To show Caller IDEnter "186" before the phone number.■To hide Caller IDEnter "184" before the phone number.bo/c■To make a video callPress t. Showing/Hiding Caller ID Using the Function MenuaEnter the phone number yh [Function] y "Caller ID" y "Show ID"/"Hide ID"bo/c■To make a video callPress t.• The same operation is available from the Phonebook, Dialed Calls or Received Calls lists/detail screens.• You can set to show/hide Caller ID to the network in advance. →P51• You can set to Show/Hide Caller ID for each Contact. →P128Default Off (Checking the specifications)
59Making/Answering Calls XXXXXShowing/Hiding Caller ID for the Next CallYou can set to show/hide the Caller ID for the next call in advance. (Checking the specifications)acy $★$ (Settings) y "In-Call Setup" y "Caller ID Notification" y "Next Call Only" y "Show"/"Hide"Sending Push Signals QuicklyEnter "p"/"w"/"n" and a number after the phone number to send number after the alphabetic character as push signals (DTMF).• Signals may not be received depending on the device on the receiving side.Entering "p"A call can be made with a "p" and a number after the phone number. After the number before "p" is connected, the number after "p" is sent in DTMF about three seconds later. This function is convenient for dialing an extension after a phone number is connected.aEnter a phone number y h [Function] y "Insert" y "Pause" y enter a number to send y o/cAfter the call is connected, the number after "p" is sent automatically.Entering "w"A call can be made entering a "w" and a number after the phone number. When the number before "w" is connected, the number after "w" is keyed in waiting to be sent in DTMF. This function is convenient for sending a message to a pager, reserving tickets, or checking the balance of your bank account over the phone.aEnter a phone number y h [Function] y "Insert" y "Wait" y Enter a number to send y o/cb h [OK]The number after "w" is sent.Entering "n"You can make a call entering "n" after a phone number and entering a number to be sent instead of "n". After the number before "n" is connected, the number entered for "n" is sent in DTMF. This function is convenient to make an international credit card call that is connected using the access number and then requires a credit card number, PIN number or a phone number.*: From January, 2001, the DoCoMo pager service changed its name to QUICKCAST.Continued on the next page
60XXXXXMaking/Answering CallsaEnter a phone number y h [Function] y "Insert" y "n" y Enter a number to send y o/cThe entry screen of the number to be sent instead of "n" is displayed.bEnter "n" value y i [OK]When the call is connected, the entered number is sent instead of "n".WORLD CALLMaking International CallsWORLD CALL is an international calling service available from a DoCoMo mobile phone.FOMA service subscribers are also signed up for WORLD CALL at the time of initial subscription (except subscribers explicitly declining this service).• You can make calls to about 220 countries and regions around the world.• Charges for "WORLD CALL" are added to the monthly FOMA service call charges.• No initial fee and no fixed monthly charges apply.• This service is not available with some billing plans.• For details on WORLD CALL, contact the "DoCoMo Information Center" on the back of this manual.• When using international carriers other than DoCoMo, contact the prospective carrier directly.Changes to the International Call Dialing ProcedureThe "MY LINE" service is not applicable to mobile phone communications, including WORLD CALL service. Along with the introduction of the "MY LINE" service, the dialing procedure for international communications using a mobile phone has been changed. Consequently, the previous dialing procedure (Step 1 in "Making an International Call" (P37) without the prefix "010") can no longer be used.Making an International Call by Entering a Phone NumberEnter the phone number in the following format: aEnter "009130-010-Country Code-Area Code (City Code)-Phone Number"• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as Italy, the leading "0" may be required)bo/c■To make a video callPress t.An "International Video Call" to an overseas party with a specific 3G mobile phone can be made by pressing t after the following dialing procedures.• For information about the countries where connection can be made and telecommunications carriers, refer to the DoCoMo's Web site.• For details, contact the "DoCoMo Information Center" on the back of this manual.
61Making/Answering Calls XXXXXMaking an International Call Using "+"Enter "+" at the beginning of a phone number and dial to replace "+" with an international access code automatically. Press 0 for 1+ seconds to enter "+".• Set "Auto-Assist Settings" of "International Access Code" to "On" before making a call. →P62• The automatically added International Access Code is set to WORLD CALL (009130010) by default. →P62a0 (for 1+ seconds) y Enter "Country Code - Area Code (City Code) - Phone Number"• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as Italy, the leading "0" may be required).bo/cThe confirmation to dial is displayed.• The phone number with the International Access Code added is displayed on the confirmation to dial screen.■To make a video callPress t.ch [Yes]• This option is available only inside the FOMA network service area.• If the phone number has "+81" as its prefix, "+" will not be converted into the International Access Code.Making an International Call Using a Function MenuYou can select an international access code from the function menu and add it to the phone number.aEnter "Country Code - Area Code (City Code) - Phone Number"• Exclude the leading "0" (zero) from the area code (city code) (in some countries or regions such as Italy, the leading "0" may be required).bh [Function] y "Add International Access No." y Select a number yh [Select]The international access code is added at the beginning of the phone number.co/c■To make a video callPress t.• WORLD CALL is set as the international access code by default. International access codes can be added. →P62
62XXXXXMaking/Answering CallsMaking an International Call EasilySetting to Add the International Access Code AutomaticallyYou can set whether to add an international access code automatically instead of "+" when you make a call by entering "+" at the beginning of the phone number. Also, you can specify the international access code to be added automatically.acy $★$ (Settings) y "In-Call Setup" y "Intl Dial Settings" y "Intl Access Code" y "Auto-Assist Settings" y Perform the following operationsAuto Assisty"On"/"Off"Access Codey Select an International access code yh [Select]• You can save international access codes under "IDD Prefix Settings".International Call SettingStoring International Access CodesUp to three international access codes can be stored.acy $★$ (Settings) y "In-Call Setup" y "Intl Dial Settings" y "Intl Access Code" y "IDD Prefix Settings"•c: View the stored international access codes.b"[New Entry]" y Perform the following operationsNameSave the name of the international access code. Up to XX full-pitch or XX half-pitch characters can be entered.y Enter the name yi [OK]Access CodeUp to XX digits can be entered.y Enter the access code yi [OK]ch [Complete]Default Auto Assist: Off Access Code: World Call (0091300101)Access CodeIDD Prefix Settings screen
63Making/Answering Calls XXXXX• The following operations are available by pressing h [Function] on the name entry screen/access number entry screen:- Select "Editing Function" to edit text. →P261- Select "Cancel Entry" to cancel saving.The Function Menu on the IDD Prefix Settings Screen• The function menu is available only while a saved international access code is selected.aIDD Prefix Settings screen (P62) yh [Function] y Perform the following operationsEditYou can correct the selected international access code. Go to Step 2 of "Storing International Access Code" (P62). DeleteThe selected international access code will be deleted.NewGo to Step 2 of "Storing International Access Code" (P62).• The pre-installed "World Call" number can also be edited.• The international access number set as Auto-Assist cannot be deleted.Sub AddressMaking a Call by Specifying a Sub AddressYou can set whether digits after "*" of a phone number with "*" inserted are identified as a sub-address. A sub-address is used to call up a specific device connected to an ISDN line or to select contents on "V live".acy $★$ (Settings) y "In-Call Setup" y "Sub Address" y "On"/"Off"• "*" is not identified as a delimiter of a sub-address if: (Checking the specifications)- "*" is entered at the beginning of the phone number- A specific number such as "184" or "186" is entered at the beginning of the phone number- "*" is entered right after "p" or "w"EditDeleteDefault (Checking the specifications)
64XXXXXMaking/Answering CallsIn-Call TimerWarning with Display and Alarm when a Set Period Elapses during a CallYou can set to warn by displaying information about a call on the screen and sounding an alarm if the set period of time elapses during the call. (Checking the specifications)acy (Settings) y "In-Call Setup" y "In-Call Timer" y Perform the following operationsDisplayBeepEnter an interval between Beeps of the range from 1 second to 999 seconds.y "60 Seconds"/"Off" y Enter Beep interval yi [OK]• The alarm setting completes if you select "Off".• The following operations are available by pressing h [Function] on the alarm interval entry screen:- Select "Editing Function" to edit text. →P261- Select "Cancel Entry" to cancel saving.• If "Credit Available" is set, it is impossible to make a call and the counter is reset when exceeding the "Credit Limit".Talking Using HandsfreeYou can set to hear the other party's voice from the speaker.aTalking screen (P54) yh [Function] y "Spkrphone On"■To cancel a handsfree talkingPress h [Function] and select "Spkrphone Off". (Checking the specifications)• Keep a distance of at least XX cm between the handset and your ear during a Handsfree call.• To operate during a video call →P83In-Car HandsfreeTalking in a Car, Hands Free Connecting the handset to a handsfree device, such as an in-car handsfree kit 01 (optional) or a car navigation system, allows you to make or receive a voice call from a handsfree device. Default Display: Off Beep: OffTimeCredit AvailableOff: Shows the duration of the call.: Shows the available remaining amount to the amount set under "Credit Limit".: Nothing is displayed.Display
65Making/Answering Calls XXXXXFor operations of a handsfree device, refer to the user manual of the device. To use an in-car handsfree kit 01 (optional) via USB, a FOMA in-car handsfree cable 01 (optional) is necessary.• If you connect the handset with a Bluetooth handsfree device via a Bluetooth connection, register the device before connecting.• To use a handsfree device via USB connection, set "USB Mode Settings" to "Data Connection".• Screen display for incoming or a ringtone are in accord with the settings on the handset.• When you switch to handsfree, a ringtone sounds from the handsfree device even if Manner Mode is set or "Ring Volume" is set to "0" for the handset.• The incoming call actions with Public Mode (Drive Mode) activated is in accord with Public Mode (Drive Mode) settings.• The ring actions with Answering Machine activated is in accord with the "Record Message" settings.• Folding the handset during a call does not affect the call. (Checking the specifications)Talking via BluetoothYou can talk connecting the handset to a commercially available Bluetooth device such as a Bluetooth headset.• Register the Bluetooth device before connecting it to the handset. →P239• For operations of a Bluetooth device, refer to the user manual of the device.aMake/Receive a Call using a Bluetooth device•$★$ appears when the handset is connected to a Bluetooth device.■To switch to a Bluetooth device during a call(Checking the specifications)Receiving a CallaA call arrivesThe ringtone sounds and the incoming call lamp blinks.•NM: Stops the ringtone or vibration.bo/i [Answer]Answer the call.cp to terminate the call■Display of the Incoming call screen (with Caller ID)If the caller is saved in the Phonebook, the name and phone number are displayed. If an image is saved in the Phonebook, the specified image is displayed. (Checking the specifications)• If an image is saved for a group, the image for the group takes precedence to be displayed. (Checking the specifications)• When the "Secret Data" is set to "Hide", "Private ID" is displayed when a call arrives from a caller saved as secret in the Phonebook.Incoming call screenTo be insertedContinued on the next page
66XXXXXMaking/Answering Calls• If a call arrives to an additional number of Multi Number, the ringtone set in "Multi Number" sounds and the following icon appears on the incoming screen: $★$/$★$: Incoming voice call$★$/$★$: Incoming video call$★$/$★$: Incoming data■Display on the Incoming call screen (without Caller ID)The reason for no Caller ID is displayed instead of a phone number. →P127• The incoming call actions such as a ringtone, vibration or screen display vary depending on the settings in "Style". →P106, P108• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound and the incoming call lamp does not blink.• When "Multi-key" is set, you can answer the call by pressing a key other than the key in Step 2.• When "Open to Answer" is set, you can answer a call by opening the handset.• If you subscribe to the Voicemail, Call Waiting or Call Forwarding service, when "Incoming Call Mgmt" is set to "Answer Call" and "Incoming Call Setting" is enabled, a busy tone during a call sounds if a call arrives during another call, If a busy tone during a call sounds, each service is available. →P251• You can set "Ring Delay" to delay the incoming call action for a call made from a party not saved in the Phonebook.• Use the following functions to reject incoming calls from a caller not saved in Contacts/specific caller.- Set "Not in Phonebook" to "Reject".- Set "Reject Calls" of Phonebook to "Yes".The Function Menu on the Incoming Call ScreenaIncoming call screen (P65) yh [Function] y Perform the following operationsAnswerAnswer the ringing call.End Active Call & AnswerTerminate an active voice call to answer a ringing call.End Held Call & Answer Terminates a call on answer hold to answer another call. (Checking the specifications)Reject CallReject an incoming call and hang up.Response HoldPlaces the call on hold.VoicemailConnects a call to the Voicemail center.Call ForwardingTransfers an incoming call to the specified number.• This option is not available unless you subscribe to the Voicemail service.• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.VoicemailCall Forwarding
67Making/Answering Calls XXXXXMulti-keyAnswering a Call by Pressing a Dial KeyYou can set to answer a voice call by pressing a key other than i [Answer], o, J (for 1+ seconds). (Checking the specifications)acy $★$ (Settings) y "In-Call Setup" y "Answer Function" y "Multi-key" y "On"/"Off"• After setting, the following keys can be used to answer a call.t, m, 0 to 9, *, #, c, C• This function is not available when a video call arrives.Open to AnswerAnswering a Call by Opening the HandsetYou can set to answer a voice or video call by simply opening the handset when a call arrives while the handset is folded.acy $★$ (Settings) y "In-Call Setup" y "Answer Function" y "Open to Answer" y "On"/"Off"• When "Open to Answer" is set, answer hold operations or function menu of the incoming call screen are unavailable.Received CallsUsing Received CallsUp to 20 incoming voice or video call entries are saved in Received Calls. A phone number, received date and time, ringing duration, and show/hide Caller ID are saved in the entries.• If there are more than 20 entries, the oldest entries will be overwritten first.• Receiving a call from the same phone number overwrites the entry of the latest received date and time.aly "Received Calls"• The caller's name appears if the caller is saved in the Phonebook.Default OnDefault OnReceived Calls listContinued on the next page
68XXXXXMaking/Answering CallsbSelect an entry ycco/tThe phone number entry screen opens with the phone number entered.do/c• Press c to make a call in the same way (voice/video call) as the entry.■To make a video callPress t.• Operations of a function menu from the Received Calls list or Received Calls detail screen are the same as the Dialed Calls list or Dialed Calls detail screen. →P57• You can make a call also by selecting an entry on the Received Calls list and performing Step 3 and subsequent steps.• If the call arrives to an additional number of Multi Number, the icon of the number is displayed. (Checking the specifications)• The reason for no Caller ID is displayed for the call log entry without Caller ID. →P127• Dialed Calls entries from a caller who is saved as secret when "Secret Data" is set to "Hide", or a caller whose calls are set to be rejected in Phonebook are displayed as "Secret" on the Received Calls list or Received Calls detail screen.• Calls made to parties who are not saved in the Phonebook are displayed as "Name unknown" on the Received Calls detail screen.• When "Show in Call Logs" is set to "Off", a call that is hung up within the time set in "Ring Delay" is not saved in Received Calls.• The call log entry of a dialed call may have a different number from the number actually dialed.■Icons on the Received Calls list screen (Checking the specifications)The following icons indicate types of calls: $★$: Voice call $★$: Video call $★$: Connected call $★$: Missed call $★$: Number1 $★$: Number2• Received calls from parties saved in the Phonebook have icons saved under "Type".Adjusting the Other Party's Volume during a CallThe earpiece volume can be adjusted in X levels from X to X. (Checking the specifications)aTalking screen (P54) yN/M•N: Increases the volume.•M: Decreases the volume.• The adjusted earpiece volume will be retained after the call. (Checking the specifications)Default (Checking the specifications)Received Calls detail screenScreen to be inserted
69Making/Answering Calls XXXXXAdjusting the Ringtone VolumeThe ringtone volume can be adjusted in 8 levels from 0 to 7.• The default settings vary depending on the settings of "Style".aN/M• When the volume is set to "1", pressing M sets "Vibrate" and pressing M again sets "Silent".• You can also set the ringtone volume using "Detail" under "Sound Profiles".• The ringtone volume cannot be adjusted when Manner Mode is set.• The set volume is used for incoming calls, incoming mails, Voicemail calls, Calendar alarms, incoming data, and Reminders. (Checking the specifications)Power SettingSaving Power Consumption during a Call (Checking the specifications)acy $★$ (Settings) y "General Settings" y "Battery Save" y "On"/"Off"Placing a Call on Hold When You Cannot Answer the CallaIncoming call screen (P65) ypThe call is placed on answer hold. The caller hears the hold tone set in "Response Hold Tone" under "Call Hold".bo when you can answer the call■Video callsPress o/t to send a camera image to the other party. Press i [Use Image] to send the image set in "Alternate image"/Chara-den to the other party.■To terminate a callPress p.• The caller is charged even during an answer hold.• When the handset is folded and "Open to Answer" is set, answer hold is not available.Default 7Default OnResponse Hold screenScreen to be insertedContinued on the next page
70XXXXXMaking/Answering Calls• If you subscribe to the Voicemail service/Call Forwarding service, you can connect the incoming call to the Voicemail Center or forward the incoming call to the specified phone number. →P66, P84Response Hold ToneSetting the Response Hold ToneYou can set the response hold tone to Japanese/English. You can also record and set a personal answer hold tone.Specifying a Response Hold Toneacy$★$ (Settings) y "In-Call Setup" y "Call Hold" y "Response Hold Tone"Japanese : The response hold tone is set to Japanese.English : The response hold tone is set to English.Personal : The response hold tone is set to Recorded data.bSelect a hold tone yc• If an Answer Hold Tone has not been recorded, "Personal" is displayed as "New".■Response Hold ToneAn Response hold tone is played as follows: JapaneseI cannot take your call now. Please wait or call again later.EnglishI cannot take your call now. Please hold the line for a moment or call me back later. Thank you.Recording Response Hold ToneaResponse Hold Tone screen (P70) y Select "New" yh [Record]Start recording. After recording finishes, the Response Hold Tone screen returns.• After recording completes, "New" is changed to "Personal".• For recording, see "Recording Voice Notes" (P218).Default JapanesePersonalResponse Hold Tone screen
71Making/Answering Calls XXXXXThe Function Menu on the Response Hold Tone ScreenaResponse Hold Tone screen (P70) yh [Function] y Perform the following operationsSet as DefaultSets the selected item as the response hold tone.PlayPlays the selected item.RerecordRecords the data again.yh [Yes] y RecordDeleteDeletes the recorded data.Placing a Call on HoldaTalking screen (P54) yh [Function] y "Hold"The call is placed on hold. The hold tone set in "Answer Hold" under "Call Hold" is played to the caller.■Video callsThe hold tone and image set in "Videocall Hold" under "Call Hold" are sent to the caller.bo when you can answer the call (Checking the specifications)■Video callsPress o/t to send a camera image to the other party. Press i [Use Image] to send the image set in "Alternate Image"/Chara-den to the other party. (Checking the specifications)■To terminate a callPress p.Answer HoldSetting the Answer Hold Tone and ImageYou can set a hold tone and an image that is displayed on your handset and the other party's while a call is on hold. (Checking the specifications)acy $★$ (Settings) y "In-Call Setup" y "Call Hold" y"Answer Hold" y Perform the following operationsAnswer Hold ToneAnswer Hold Imagey Select a folder ycy Select an image ycDefault Answer Hold Tone: Japanese Answer Hold Image: (Checking the specifications)JapaneseEnglish: The answer hold tone is set to Japanese.: The answer hold tone is set to English.Continued on the next page
72XXXXXMaking/Answering Calls■Answer hold toneThe Answer hold tone is played as follows: Japanese (Checking the specifications)English (Checking the specifications)Public Mode (Drive Mode)Using Public Mode (Drive Mode)Public Mode is an automatic response service to assist in observing manners in public locations. When Public Mode is set, a voice prompt is played to the caller indicating that you are driving or at a place where you cannot talk (such as on a train, bus, or in a movie theater) and cannot answer the call, and the call is disconnected.• You can set or cancel Public Mode only in Standby (and when $★$ is displayed).• This option is not available during data communication.a* (for 1+ seconds)When a call arrives, a voice prompt is played indicating that "you are either driving or at a place where you cannot use the handset and cannot answer the call. Please call again later.".■To cancel Public Mode (Drive Mode)Press * (for 1+ seconds) on the wallpaper screen.■When Public Mode (Drive Mode) is setEven when a call arrives to your handset, the ringtone does not sound. "X Missed Calls" is displayed on the screen and the call is stored in Received Calls.A voice prompt indicating that you are driving or you are at a location where you cannot use the handset is played to the caller, and the call is disconnected.•$★$ appears at the top of the screen when Public Mode is set.• Even when Public Mode is set, you can make calls as usual.• If a call with "Private Calling" arrives when Caller ID Display Request Service is set, a voice prompt of Caller ID Display Request service is played (instead of Public Mode voice prompt).• If Manner Mode is set concurrently, Public Mode (Drive Mode) settings take precedence.• No tones from FOMA handset sound when Public Mode (Drive Mode) is set.Incoming Call Actions When a Network Service and Public Mode (Drive Mode) are SetActions performed when Public Mode and a Network Service are set concurrently. Service Incoming Actions for a Voice Call Incoming Actions for a Video CallVoicemail service After the Public Mode voice prompt is played, the call is connected to the Voicemail Center.*The Public Mode image prompt does not appear, and the call is connected to the Voicemail Center.Call Waiting service After the Public Mode voice prompt is played, the call is terminated.After the Public Mode image prompt is shown, the call is terminated.
73Making/Answering Calls XXXXX*: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode voice prompt is not played, and the call is not recorded in Received Calls.Public Mode (Power Off)Using Public Mode (Power Off)Public Mode (Power Off) is an automatic response service to assist with observing manners in public locations. When Public Mode (Power Off) is set, when a call arrives while the power is turned off, a voice prompt is played to the caller indicating that you are at a place where the device must be turned off (such as in hospitals, in aircraft, or near priority seats on a train) and cannot answer the call, and the call is disconnected.aEnter "*25251" yoPublic Mode (Power Off) is set (the stand-by display appears the same).After Public Mode (Power Off) is set, when a call arrives while the power is turned off, a voice prompt is played indicating that "you are at a place where you must turn the device off and cannot answer the call. Please call again later".■To cancel Public Mode (Power Off)Enter "*25250" and press o.■To check the status of Public Mode (Power Off)Enter "*25259" and press o.■After setting Public Mode (Power Off)Public Mode (Power Off) is activated until it is cancelled by dialing "*25250". Turning the power On does not cancel the mode.The Public Mode (Power Off) voice prompt is played even when you are out of the service area or where no signals are received. A voice prompt indicating that you are at a location where you must turn the device off is played to the caller, and the call is disconnected.Call Forwarding service After the Public Mode voice prompt is played, the call is forwarded to the forwarding destination.*Whether the Public Mode voice prompt is played varies depending on the settings of Call Forwarding service voice prompt option.The Public Mode image prompt does not appear, and the call is forwarded to the forwarding destination. If the forwarding destination cannot handle video calls, the call is terminated.Nuisance Call Barring serviceIf the caller is saved to reject a nuisance call, the reject call voice prompt is played and the call is terminated.In a case other than the above, the Public Mode voice prompt is played and the call is terminated.If the caller is saved to reject a nuisance call, the reject call image prompt is shown and the call is terminated.In a case other than the above, the Public Mode image prompt is shown and the call is terminated.Caller ID Display Request serviceIf the caller does not send the Caller ID, the Caller ID display request voice prompt is played and the call is terminated.If the caller sends the Caller ID, the Public Mode voice prompt is played and the call is terminated.If the caller does not send the Caller ID, the Caller ID display request voice prompt is played and the call is terminated.If the caller sends the Caller ID, the Public Mode image prompt is shown and the call is terminated.Service Incoming Actions for a Voice Call Incoming Actions for a Video CallContinued on the next page
74XXXXXMaking/Answering CallsIncoming Call Actions When a Network Service and Public Mode (Power Off) are SetActions performed when Public Mode and a Network Service are set concurrently. *: If the ring time for a Network Service is set to 0 (zero) seconds, the Public Mode (Power Off) voice prompt is not played, and the call is not recorded in Received Calls.Checking Missed CallsIf you could not answer a call, the Missed call notification screen is displayed on the wallpaper screen. From the Missed call notification screen, you can check the caller.aAn incoming call terminatesThe number of missed calls is displayed.•i [Exit]: The Missed call notification screen is closed.bh [View]The Received list screen opens. $★$ appears for a Missed Call.cSelect a missed call entry ycThe Received Calls list detail screen opens.Service Incoming Actions for a Voice Call Incoming Actions for a Video CallVoicemail service After the Public Mode (Power Off) voice prompt is played, the call is connected to the Voicemail Center.*The Public Mode (Power Off) voice prompt is not played, and the call is connected to the Voicemail Center.Call Forwarding service After the Public Mode (Power Off) voice prompt is played, the call is connected to the forwarding destination.*Whether the Public Mode voice prompt is played is according to the settings of Call Forwarding service voice prompt option.The Public Mode (Power Off) image prompt does not appear, and the call is forwarded to the forwarding destination.If the forwarding destination cannot handle video calls, the call is terminated.Nuisance Call Barring serviceIf the caller is saved to reject a nuisance call, the reject call voice prompt is played and the call is terminated.In a case other than the above, the Public Mode (Power Off) voice prompt is played and the call is terminated.If the caller is saved to reject a nuisance call, a message indicating that the call was not connected and the call is terminated.In a case other than the above, the Public Mode (Power Off) image prompt is shown and the call is terminated.Caller ID Display Request serviceIf the caller does not send the Caller ID, the Caller ID display request voice prompt is played and the call is terminated.If the caller sends the Caller ID, the Public Mode (Power Off) voice prompt is played and the call is terminated.If the caller does not send the Caller ID, the Caller ID display request voice prompt is played and the call is terminated.If the caller sends the Caller ID, the Public Mode (Power Off) image prompt is shown and the call is terminated.Missed call notification screen
75Making/Answering Calls XXXXX• After checking a missed call, the notification screen will not open.• When "Show in Call Logs" is set to "No", the Missed call notification screen for a call that is hung up within the time set in "Ring Delay" is not displayed.Answering MachineRecording of Voice/Video-clip Message from a Caller when You Cannot Answer a CallEven if you do not subscribe to the Voicemail service, a response message indicating that you cannot answer the call can be played, and your handset can record the voice/image message.Setting the Answering Machineacy $★$ (Accessories) y "Record Message" yh [Function] y "Setting"bPerform the following operationsRecord MessageActivate/deactivate the Answering Machine.y"On"/"Off"Response TimeSet the duration of time from when the call arrives until Answering Machine launches. Enter between XX - XX seconds.Use j to enter the time yh [OK]Record TimeSet the recording time for the Answering Machine.Select a recording time yh [Select]Response GreetingResponse ImageDefaultRecord Message: Off Response Time: 8Sec Record Time: 30SecResponse Greeting: Japanese Response Image: JapaneseJapaneseEnglishPersonal: The message language is set to Japanese.: The message language is set to English.: The message is set as Recorded data.JapaneseEnglish: The Response image is set to Japanese.: The Response image is set to English.Settings screenContinued on the next page
76XXXXXMaking/Answering Calls•$★$ appears at the top of the screen when the Answering Machine is set.• The time also can be entered using dial keys.• If the Response time is set longer than the ring time of the Voicemail/Call Forwarding service, the setting for the service takes precedence.• If the Response time is set shorter than the set "Ring Delay", Answering Machine launches without the ring action.• If the Response Greeting has not been recorded, "Personal" is displayed as "New".• If recorded data is deleted, the Response Greeting reverts to "Japanese". (Checking the specifications)• The following operations are available by pressing h [Function] on the Response image list:- Select "Set as Default" to set the selected item as the Response image.- Select "Preview" to view the selected response image.Response GreetingRecording a Response GreetingaSettings screen (P75) y "Response Greeting"bSelect "New" yc• After recording completes, "New" is changed to "Personal".• For recording, see "Recording Voice Notes" (P218).The Function Menu on Greeting ListaGreeting List screen (P76) yh [Function] y Perform the following operationsSet as DefaultSets the selected item as the Response Greeting.PlayPlays the selected Response Greeting.EditRecords the greeting again.DeleteDeletes the recorded greeting.yh [Yes]Response TimeResponse GreetingResponse ImageGreeting List
77Making/Answering Calls XXXXXWhen Record Message is ActivatedThe caller's voice is recorded for a voice call, and the caller's image for a video call.aA call arrives y the Response Message is playedThe Response Message is played after the set response time elapses. The Response Image is also sent for a video call.•h [Answer]: Stop the Response Greeting and answer the call.•i [Disconnect]: Disconnect the call.bRecording startsThe other party's voice in recording hears from the earpiece.•h [Answer]: Stop recording and answer the call.•i [Disconnect]: Disconnect the call.cRecording completes•h [Play]: Play the Answering Machine message.■If more than one message/video clip is recorded in the Answering MachineThe number of recordings is displayed on the New Message notification screen. Press [View] to display the Recorded message list.• The number of messages that can be recorded varies depending on the available memory space. You can check the available memory space for recording messages. →P78• The Answering Machine is not available when $★$ is displayed, the handset power is turned off, or Public Mode (Drive Mode) is set.Playing/Deleting Record MessagePlaying Record Messageacy $★$ (Accessories) y "Record Message"• The caller's name appears if a caller saved in the Phonebook recorded a message. (Checking the specifications)■NoticeIt is recommended that you write down messages from the Answering Machine and store them in a separate location. DoCoMo is not responsible for lost recorded messages due to failure or repair of the FOMA handset.Greeting playback screenRecording MessageNew Message notification screenRecorded message listScreen to be inserted
78XXXXXMaking/Answering CallsbSelect a recorded message ycThe message is played.•/cu: Pauses.•l/r: Plays the previous/next message.•d: Stops the playback.•i [Return]: Returns to the Recorded message list screen. (Checking the specifications)■Icons on the Recorded message list screen (Checking the specifications)The following icons indicate types of messages: $★$: Unchecked voice call message $★$: Unchecked video call message$★$: Checked voice call message $★$: Checked video call message$★$: Protected voice call message $★$: Protected video call message• The function menu operations on the Answering Machine playback screen are identical to those on the melody playback screen.(Checking the specifications) →P213The Function Menu on the Recorded Message ListaRecorded message list screen (P77) yh [Function] y Perform the following operationsPlayPlays the selected message recorded in the answering Machine.CallMake a call to the phone number of the selected message recorded in the Answering Machine.yo/tAdd to Ph BookSave the caller's phone number of the selected message recorded in the Answering Machine to the phonebook. Go to Step 2 in "Saving Contacts to Phonebook from Received Calls or Dialed Calls" (P94).DeleteDeletes the selected message recorded in the Answering Machine.yh [Yes]Delete AllDeletes all messages recorded in the Answering Machine.yh [Yes]Lock・UnlockProtects/Unprotects a message recorded in the Answering Machine.SettingsSets the Answering Machine. Go to Step 2 (P95) in "Setting the Answering Machine".View Free SpaceChecks the available space, used space and total space for Answering Machine.
79Making/Answering Video CallsVideo Calls ..................................................................................................................80Making a Video Call ....................................................................................................80Receiving a Video Call................................................................................................83Using Chara-den .........................................................................................................85Setting the Image to Send to the Other Party ..........................................................85Setting Handsfree for Video Calls<Handsfree> .......................................................86Setting a Displayed Image during a Video Call........................................................86Setting a Video Call Hold Tone and Image<Videocall Hold> ..................................87Changing the Video Call Settings<Video Call Settings>.........................................88
80Making/Answering Video Calls XXXXXVideo CallsVideo calls are available between DoCoMo video-phones.• DoCoMo video-phones comply with "3G-324M*1, an international standard for 3GPP*2". The handset cannot connect to a video phone that uses a different system from DoCoMo video-phones.*1: 3G-324MThis is an international standard for the third generation of mobile video-phones.*2: 3GPP (3rd Generation Partnership Project)This is a regional standards organization for developing common technological specifications for the third generation mobile communication system (IMT-2000).Components of Video Call ScreenaMain windowbSub windowcThe other party's phone number/namedCall durationeOperation icon$★$/$★$ (Image): Switches between the camera image and alternate image$★$/$★$ (On hold): Places a call on hold$★$/$★$ (Speaker): Sets/cancels Handsfree$★$/$★$ (Window): Switches between the main and sub windows$★$/$★$ (Camera): Switches between the internal and external views of the cameraMaking a Video CallaEnter a phone number• The function menu on the phone number entry screen →P54• Start from the city code even for an inside the city call.■To make a call to a general phone■To make a call to a mobile phone090−XXXX−XXXX/080−XXXX−XXXX■To make a call to a PHS070−XXXX−XXXXbtStart talking when the other party answers.• Digital communication charges apply from the time the Connecting screen is displayed.•j: Enlarge or shrink the camera image.•0 to 9: Sends push signals (DTMF).cp to terminate the callArea Code −City Code −Phone NumberabcdPhone number entry screenVideo call screenConnecting screen
81Making/Answering Video Calls XXXXX• If an image requests the Caller ID, make the video call again sending the Caller ID.• International video calls are available using "WORLD CALL", DoCoMo's international telephone service. →P60• The connection cannot be established if the call is made to a non video-phone or even if the other party has a video-phone, when the handset power is turned off or outside of the service area. If you made a call to non video-phone, the call is cancelled and a confirmation to call again is displayed. (Checking the specifications) Select "Reconnect as Voice Call" to call again as a voice call. However, this may not occur if the destination is ISDN synchronous 64K or PIAFS, ISDN video-phone that does not handle 3G-324M (as of XX 2006), or wrong number was dialed. Communication charges may apply.• If an emergency call such as 110, 119 or 118 was made from the FOMA handset via video-phone and the other party does not have a video-phone, call again using a voice call.• i-mode mail or Message R/F arriving during a video call is stored at the i-mode center. SMS can be received even during a video call.• Digital communication charges apply even if you send the alternative image.• If the handset is not set to "DTMF ON", push signals cannot be sent by pressing dial keys during a Chara-den video call. →P82■When video calls are not connectedThe following error messages indicate the reason: • The message displayed may not accurately describe the actual situation depending on the other party's handset or subscription to Network Services.The Function Menu on the Connecting Screen/Video Call ScreenaConnecting screen (P80)/Video call screen (P80) y h [Function] y Perform the following operationsSelect ApplicationCalls up another function such as Phonebook. →P226Error Message ReasonVideo Call FailedCheck number, then redial.The dialed phone number is no longer in use.Number Busy The line is busy or using packet communication.• Select "Reconnect as Voice Call" to switch to a voice call.• Select "Redial Video Call" to try a video call again.• Select "Send Message" to create and send mail with the entered phone number as an address.Video Call FailedOut of the Service Area/Power Off. Send a Message?The other party is in a location where no signals are received or the phone is turned off.• Press h [Yes] to create and send SMS with the entered phone number as an address.Video Call Failed.Public Mode (Drive Mode).Create a Message?The other party has set Public Mode (Drive Mode).• Press h [Yes] to create and send mail with the entered phone number as an address.Video Call FailedSet Caller ID to ON.Send a Message?The other party's phone is set to reject no Caller ID calls and you did not send the Caller ID, or you dialed to V-Live or Visual Net. (Checking the specifications)• Press h [Yes] to create and send mail with the entered phone number as an address.Video call failed Appears for the reason other than the above.• Select "Reconnect as Voice Call" to switch to a voice call.• Select "Redial Video Call" to try a video call again.• Select "Send Message" to create and send mail with the entered phone number as an address.Default Lighting Conditions: 10 seconds (Checking the specifications) Brightness: 3Continued on the next page
82Making/Answering Video Calls XXXXXCamera On/Off imageSwitches the image to send between camera image and alternate image.Call Hold/ResumePlaces the call on hold/resumes the call.Swap ViewSwitches between Main and Sub windows.External View/Internal ViewSwitches Camera image between External camera and Internal camera.Audio Mute/Audio UnmuteSet or cancel mute. Your voice will not be sent to the other party when mute is set.Status Icons On/Status Icons OffSets ON/OFF of the display of operation icons displayed on the top of the video call screen. (Checking the specifications.)SetupBrightnessAdjusts the brightness of the screen during a call. →P87My Telephone NumberDisplays your phone number.Use BluetoothSearches and connects to a registered Bluetooth headset or other devices. (Checking the specifications)Dialed CallsDisplays Dialed Calls.Received CallsDisplays Received Calls.Other InformationDisplays other information. →P242 (Checking the specifications) DTMF On/DTMF OffAllows/Prohibits push signals to be sent while using Chara-den during a video call.Action ListOpens the Action list screen. →P85Change ActionSwitches between Whole action mode and Part action mode. →P85• The Alternate image sent to the other party is either an image or Chara-den according to the settings in "Alternate image".Mirror On or Mirror Off : Set or cancel the mirror image of the camera image. →P87Lighting Conditions : Adjusts the white balance to the light source of the recording place. →P137 (Checking the specifications)Alternate image
83Making/Answering Video Calls XXXXXPlacing a Call on HoldYou can place a call on hold or cancel on hold using an operation icon.aVideo call screen (P80) y use s to select $★$ (Hold) y i [Hold]/i [Resume]While the call is on hold, the hold tone and image set in "Videocall Hold" under "Call Hold" are sent to the caller.• You can also cancel on hold by pressing o/t during hold.• While a call is held on hold, $★$ is displayed, and after Hold is cancelled, $★$ is displayed.Switching to a Handsfree CallYou can set to hear the other party's voice from the speaker using an operation icon.aVideo call screen (P80) y use s to select $★$ (Speaker) y i [Speaker On]/i [Speaker Off]• During a Handsfree call, $★$ is displayed, and after Handsfree is cancelled, $★$ is displayed.Receiving a Video CallaA call arrivesThe ringtone sounds and the incoming call lamp blinks.•N/M: Adjust the ringtone volume. (Checking the specifications)bt／oAnswer the call.■To answer the call with sending your camera image to the callerPress i [Use Image]. An image or Chara-den is sent to the other party according to the settings in "Alternate Image".cp to terminate the callIncoming Video Call screenContinued on the next page
84Making/Answering Video Calls XXXXX• Depending on the settings in "Style", the incoming call actions such as a ringtone, vibration or screen display vary. →P106, P108• If the caller is saved in the Phonebook, depending on the saved settings, the incoming call actions, such as ringtone, screen display or incoming call lamp vary.• When Manner Mode is set, the ringtone does not sound. When Public Mode (Drive Mode) is set, the ringtone does not sound and the incoming call lamp does not blink.• When "Open To Answer" is set, you can answer a video call by opening the handset.• You can set to delay the incoming call action for a call made from a party not saved in the Phonebook in "Ring Delay".• When the Voicemail service is activated, SMS notifies you of a new message.• Even if the Call Forwarding service is activated, an incoming video call is not forwarded if the forwarding destination is not a 3G-324M video-phone handset. Check the forwarding destination device before setting the Call forwarding.• i-mode mail or Message R/F arriving during a video call is stored at the i-mode center. SMS can be received even during a video call.• A video call cannot be received with 32K. (Checking the specifications)The Function Menu on the Incoming Video Call ScreenaIncoming Video Call screen (P83) y h [Function] y Perform the following operationsAnswerReceives a video call.IgnoreReject an incoming call and hang up.Answer HoldPlaces the call on hold.Call ForwardTransfers a video call to the specified number.• This option is not available unless you subscribe to the Call Forwarding service and you specify a forwarding destination.Call Forwarding
85Making/Answering Video Calls XXXXXUsing Chara-denYou can send a character of Chara-den instead of camera image to the other party. The movement of the character can be controlled using keys.• Set "Alternate Image" to "Chara-den" in advance.aPress i [Use Image] when a call arrives• Press 0 - 9 and # to control the character.■To view the character's actionPress h [Function] to select "Action List" to open the action list screen. Select an action and press h [Select] to check the action.■To switch action modePress h [Function] and select "Change Action" to switch between Whole action mode and Part action mode.• For operations on the Action list screen or Chara-den, or details of Action modes, see "Chara-den" (P213).• Emotions of character are expressed as a whole in Whole action mode, and using a face, arms and legs in Part action mode.• When "DTMF On" is set, Chara-den cannot be controlled by pressing dial keys. (Checking the specifications)Setting the Image to Send to the Other PartySwitching between Camera Image and Alternate ImageaVideo call screen (P80) y use s to select $★$ (Image) y i [Use image]/i [Camera On]• You can also press t to switch between Camera image and Alternative image.• The Alternate image sent to the other party is either an image or Chara-den according to the settings in "Alternate image" of "Video Call Settings".• While the Camera image is sent, $★$ is displayed, and while the Alternate image is sent, $★$ is displayed.Video call screen©BVIGChara-den
86Making/Answering Video Calls XXXXXSwitching between the Internal and External View of the CameraaVideo call screen (P80) y use s to select $★$ (Camera) y i [Ext. View]/i [Int. View]• While the Internal camera is used, $★$ is displayed, and while the External camera is used, $★$ is displayed.HandsfreeSetting Handsfree for Video CallsYou can set whether the other party's voice to come from the speaker using Handsfree or from the earpiece when receiving a video call. (Checking the specifications)ac y $★$ (Settings) y "In-Call Setup" y "Video Call Settings" y "Handsfree" y "Speaker"/"Earpiece"Setting a Displayed Image during a Video CallSwitching between Main and Sub windowsaVideo call screen (P80) y use s to select $★$ (Window) y i [Swap View]• While switched, $★$ is displayed, and after the headset is cancelled, $★$ is displayed.Default SpeakerDefault Main window: The other party's image Sub window: Your image
87Making/Answering Video Calls XXXXXChanging the Camera Image to a Mirror ImageYou can see the In view with the right and left inversed (Mirror On), or with the original right and left (Mirror Off).aVideo call screen (P80) y h [Function] y "Setup" y "Mirror On"/"Mirror Off"Adjusting the white balanceYou can adjust the white balance according to the light source of the shooting location.aVideo call screen (P80) y h [Function] y "Setup" y "Lighting Conditions"Automatic : Adjust automatically.Sunny : Suitable for a call outdoor and sunny.Indoor (Home) : Suitable for a call under incandescent lighting.Indoor (Office) : Suitable for a call under florescent lighting.Night : Suitable for a call at night.bSelect a setting y h [Select]• If you select "Off", the backlight does not turn on.Adjusting the Brightness of the ScreenThe brightness can be adjusted to 6 levels. (Checking the specifications)aVideo call screen (P80) y h [Function] y "Brightness"The Brightness screen opens. (Checking the specifications)bUse a to adjust the brightness y h [OK]Videocall HoldSetting a Video Call Hold Tone and ImageYou can set a hold tone and an image that is displayed on your handset while a call is on hold. (Checking the specifications)Default Auto (Checking the specifications)Default 3 (Checking the specifications)Default Video Call Hold Tone: Japanese Video Call Hold Image: (Checking the specifications)Continued on the next page
88Making/Answering Video Calls XXXXXac y $★$ (Settings) y "In-Call Setup" y "Call Hold" y "Videocall Hold" y Perform the following operationsVideocall Hold ToneVideocall Hold Imagey Select a folder y c y Select an image y c■Video Call Hold ToneA call hold tone is played as follows: Japanese (Checking the specifications)English (Checking the specifications)Video Call SettingsChanging the Video Call SettingsSetting Alternate image/Chara-denYou can set the alternate image sent by pressing h [Use Image] during a video call.ac y $★$ (Settings) y "In-Call Setup" y "Videocall Settings" y "Alternate image"My Pictures : An image is set as the Alternative image. Go to Step 2.Chara-den : Chara-den is set. Go to Step 2.bSelect a folder ycy Select an image/Chara-den ycJapaneseEnglish: The hold tone is set to Japanese.: The hold tone is set to English.Default (Checking the specifications)
89PhonebookPhonebooks Available on the FOMA Handset .........................................................90Saving in the FOMA Handset Contacts ....................................................................91Saving in the UIM Contacts........................................................................................93Saving Contacts to the Phonebook from Received Calls or Dialed Calls .............94Saving/Editing a Category Name<Edit Category/UIM Category>...........................95Making a Call from the Phonebook<Search>...........................................................97Viewing a Phonebook Entry.......................................................................................98Deleting Contacts .....................................................................................................101Setting Details of the Phonebook<Setup> .............................................................102Checking the Phonebook Capacity and Utilization<Phone Capacity/UIM Capacity> .............................................................................103Making a Call Using Speed Dial...............................................................................103
90Phonebook XXXXXPhonebooks Available on the FOMA HandsetThere are 2 Phonebooks: the FOMA handset Phonebook and the UIM Phonebook.The following can be saved/set for each Contact:• Only one per entry.*: This is an approximate number of entries when both Phonebooks save up to the maximum number of optional items. The available number of entries (up to 2000 entries) to be saved varies depending on the contents.• You can use the UIM Phonebook entries if you insert the UIM into another FOMA handset.Item FOMA Handset Phonebook UIM PhonebookNumber of Entries Approx. 700* Up to 50Name/Reading 1 per entry 1 per entryNickname 1 number Not availablePrimary Number Not available (Checking the specifications)Only 1 number (Checking the specifications)Phone number Up to 7 numbers Only 1 numberType Select from 9 types Select from 9 typesVideo Number Available Not AvailableEmail Up to 3 addresses Only 1 addressType Select from 5 types Not AvailableURL Up to 2 URL's Not availableAddress Up to 2 Not availableType Select from 3 types Not AvailableCategory Select from X types Select from X typesPicture One available Not availableRinger ID One available Not availableChara-den One available Not availableBirthday One available Not availableNotes One available Not availableSecret Available Available (Checking the specifications)Reject Available Not availableSpeed Dial Available Not available■Notice• It is recommended that you write down the contents of the Phonebooks and store it in a separate location. You can connect the handset to a PC using data link software and a FOMA USB cable (optional) and save Phonebook entries to the PC.• It may not be possible to copy the data you have saved on your FOMA handset to a new model depending on the specifications. Check with a DoCoMo shop.• DoCoMo is not responsible for lost data due to failure or repair of the FOMA handset.Savable Item
91Phonebook XXXXXSaving in the FOMA Handset Contactsad y "[New]"bPerform the following operations NameEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 16 full-pitch or 32 half-pitch characters can be entered.y Enter a nameReadingEnter or edit when necessary. Enter using Katakana, alphanumeric or symbols. Up to 32 half-pitch characters can be entered.y Enter a ReadingNicknameEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 50 full-/half-pitch characters can be entered.y Enter a NicknameNumberUp to 26 digits can be entered.y Enter a phone number y i [OK]TypeSet a type for the phone number.y Select a type y h [Select]Video NumberSet whether the entered phone number is for a video-phone.y "Yes"/"No"EmailEnter using alphanumeric or symbols. Up to 50 half-pitch characters can be entered.y Enter an Email addressTypeSet a type of an Email address.y Select a type y h [Select]Store ToSpecify the saving destination. In this example, select "Phone".y "Phone"/"UIM"URLEnter using alphanumeric or symbols. Up to 128 half-pitch characters can be entered.y Enter a URLPostal AddressEnter Address using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 62 full- or half-pitch characters can be entered for "Street 1" and "Street 2". Up to 32 full- or half-pitch characters can be entered for other items.y Select item to enter ycy Enter Address ycCreate Contact screenTo be insertedContinued on the next page
92Phonebook XXXXXTypeSet a type for the address.y Select a type y h [Select]Categoryy Select a category y h [Select]Picture IDSpecify an image to be displayed on the Phonebook list or on the Incoming call screen for a call from this caller.Ringer IDSpecify a ringtone for a call from this caller.y Select a folder y c y Select a ringtone/melody y cChara-denSpecify a Chara-den to be displayed as an alternative image during a video call to this party. (Checking the specifications)y Select a folder y c y Select a Chara-den y cBirthdayy Use a to enter the date y h [OK]SecretSave an entry as secret and set "Secret Data" to "Hide" to not display the entry.y "Yes"/"No"RejectReject an incoming call from the saved phone number.y "Yes"/"No"NotesEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 128 full-/half-pitch characters can be entered.y Enter a noteci [Complete]• Use the function menu to add a phone number, Email address, URL, or postal address field. →P94• The default type for a phone number, email address, and postal address are "General phone", "Mobile phone" and "Home".• The following operations are available by pressing h [Function] on the phone number entry screen:- Select in order of "Attach Number" y "Dialed Calls"/"Received Calls"/"Phonebook" to select a phone number from a call log or Contact to enter the phone number.- Select "Cancel Entry" to cancel saving.• The default for Category is "General".• The birth date also can be entered using dial keys.• Depending on the image size, images may take a while to open. (Checking the specifications)• If "Secret Data" is set to "Show", the setting field of "Secret" does not appear. (Checking the specifications)Take PictureSelect PictureRemove Picture: Capture an image to save. Press c to capture an image and press h [Insert] to save.: Select a folder and press c, then select an image and press c to save.: Deletes a saved image.NumberCategoryBirthdayPicture IDSecret
93Phonebook XXXXXSaving in the UIM ContactsaThe Create Contact screen (P91) y "Store To" y "UIM"bPerform the following operationsNameEnter using Kanji, Hiragana, Pictographs, symbols, alphanumeric or Katakana. Up to 10 full-pitch or 21 half-pitch characters can be entered. (Checking the specifications)y Enter a nameReadingEnter or edit when necessary. Enter using Katakana, alphanumeric or symbols. Up to 12 full-pitch or 25 half-pitch characters can be entered. (Checking the specifications)y Enter a ReadingPrimary Number (Checking the specifications)Enter a primary phone number. y Enter a phone number y i [OK]NumberUp to 26 digits can be entered to the UIM Card (green) and up to 20 digits to the UIM Card (blue).y Enter a phone number y i [OK]Type (Checking the specifications)Set a type of a phone number.y Select a type y h [Select]EmailEnter using alphanumeric or symbols. Up to 50 half-pitch characters can be entered.y Enter an Email addressCategoryy Select a category y h [Select]Secret (Checking the specifications)Save an entry as secret and set "Secret Data" to "Hide" not to display the entry.y "Yes"/"No"ci [Complete]Create Contact screenTo be insertedContinued on the next page
94Phonebook XXXXX• The default type for a phone number is "General Phone".(Checking the specifications)• The following operations are available by pressing h [Function] on the phone number entry screen:- Select in order of "Browse" y "Dialed Calls"/"Received Calls"/"Phonebook" to select a phone number from a call log or Contact to enter the phone number.- Select "Cancel Entry" to cancel saving.• The default for Category is "General".• If "Secret Data" is set to "Show", the setting field of "Secret" does not appear. (Checking the specifications)The Function Menu on the Create Contact ScreenaThe Create Contact screen (P91) y h [Function] y Perform the following operationsAdd NumberAdds another phone number entry field.Add E mailAdds another Email address entry field.Add URLAdds a URL entry field.Add Postal AddressAdds a postal address entry field.CancelCancels saving an entry to the Phonebook.• If "Store To" is set to "UIM", only "Cancel" is displayed.Saving Contacts to the Phonebook from Received Calls or Dialed CallsYou can save entries to a Phonebook from the list or detail screens of calls, mail, SMS, bookmarks, or screen memos that contains a phone number, mail address or URL. Also, you can save a phone number currently being entered/displayed on the phone number entry screen, compose mail screen, or Web site.<Example: Saving an entry from Dialed Calls list to the FOMA handset phonebook>aDialed Calls list screen (P56) y Select an entry y h [Function] y "Register"■To save from the phone number entry screenPress i [Save].■To save from other screensSelect an item or phone number and press h [Function], then select "Add to Phonebook".NumberCategorySecret
95Phonebook XXXXXbSelect a saving method y h [Select]• An item to overwrite appears as "Replace Email", "Replace URL" or "Replace Picture" depending on the selected item or display under Step 1.Create New Contact : Save a new entry to a Phonebook. Go to Step 5.Add to Contact : Add items to an existing Phonebook entry. The phonebook selection screen appears.Replace Number : Overwrites an existing Phonebook entry. The phonebook selection screen appears.cSelect a Phonebook entry to save y c• Go to Step 5 if you select "Add to Contact".dSelect a phone number to overwrite y h [Select]• Select an Email address if selecting "Overwrite Email", and a URL if selecting "Overwrite URL" in Step 2.• If "Replace Picture" is selected in Step 2, a confirmation to overwrite appears. Press h [Yes] and go to Step 5.eSave/edit the Phonebook entry y i [Complete]• For saving a Contact, see Step 2 in “Saving to the Phonebook” (P91).• To save an item from the Barcode reader scanned result screen, select "Add to Phonebook" and select "Add to Phonebook" on the Function menu screen. If the Scanned result screen contains a phone number, select the phone number and press c and select "Add to Phonebook" on the Function menu screen.• The following operations are available by pressing h [Function] on the Contact selection screen:- Select "Search" to find a Contact. →P97- Select the order of "View" y "Phone & UIM Card"/"UIM Card"/"Phone Contacts" to select a Contact type (phone or UIM).- Select "Cancel" to cancel the operation.Edit Category/UIM CategorySaving/Editing a Category NameCategory names can be saved/edited/managed for both the FOMA handset phonebook and the UIM phonebook. Up to 10 categories can be saved in each Phonebook.• The pre-installed "General" cannot be edited or deleted.• Only the category names and members can be saved/edited on the UIM phonebook.aPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y "Manage Contacts" y "Edit Phone Categories"/"Edit UIM Categories"■To view a category before editingSelect a category and press c [Select]. The Category detail screen opens and you can check a set image or ringtone, or assigned members.Categories screenScreen to be insertedContinued on the next page
96Phonebook XXXXXb"[New Category]"■To edit a saved categorySelect a saved Category and press h [Function], then select "Edit Category".cPerform the following operationsNameEnter a category name. Up to 24 full-/half-pitch characters can be entered.y Enter a nameMembersSelect a Phonebook entry from the select a member screen.y Select a Phonebook entry y c y i [Complete]Picture IDSpecify an image to be displayed on the incoming call screen when a call arrives from a group member.y Select a folder y c y Select an image y cRinger IDSpecify a ringtone for a call from a category member.y Select a folder y c y Select a ringtone/melody y cLight IDSpecify an Light ID for the incoming call lamp when a call arrives from a group member.y Select an Light ID y c [Select]• The following operations are available by pressing h [Function] on the Member selection screen:- Select "Search" to find a Contact. →P97- Select "Search All"/"Unselect All" to select or deselect all Contacts.- Select "View Selected" to open a list of selected Contacts.- Select "Cancel" to cancel the operation.• If you select "(None)", this option is set to the same setting as "Lights ID".The Function Menu on the Categories/Category Detail ScreenaCategories screen (P95)/Category detail screen (P96) y h [Function] y Perform the following operationsEdit CategoryEdit the selected category. Go to Step 3 in "Saving/Editing a Category Name" (P96).Delete CategoryDeletes the selected category.y h [Yes]MembersLight IDNew Category screenScreen to be inserted
97Phonebook XXXXXSearchMaking a Call from the PhonebookSearching for an Entry Using Its Reading/Alphabet/Phone Number/Symbols/PictogramEnter a reading or phone number to search for a Phonebook entry. You can also enter alphabet characters, symbols or pictographs to search for an entry.aPhonebook list (P98) y h [Function] y "Search" y Perform the following operationsReadingEnter a part of the reading. (Checking the specifications)y Enter a part of the Reading y cAlphabetEnter alphabet characters contained in any item of the entry. (Checking the specifications)y Enter alphabet characters y cPhone NumberEnter a part of the phone number. (Checking the specifications)y Enter a part of the phone number y cSymbolEnter a symbol contained in any item of the entry. (Checking the specifications)y Select a symbol y h [Confirm] y cE-MojiEnter a pictograph contained in any item of the entry. (Checking the specifications)y Select a pictograph y h [Confirm] y c (Checking the specifications)bSelect a Phonebook entry y oThe phone number entry screen opens with the phone number entered.co■To make a video callPress t.Filter by EmailYou can display only phonebook entries with Email saved on the Phonebook list to find an entry.aPhonebook list (P98) y h [Function] y "Filter by" y "Email"The Phonebook list screen of only entries with Email opens.bSelect a Phonebook entry ycy Select the phone number yoThe phone number entry screen opens with the phone number entered.coContinued on the next page
98Phonebook XXXXX■To make a video callPress t.• You can also press */# several times on the Phonebook list.• Press o on the Phonebook list, or select an email address on the Phonebook detail screen and press o, to create and send email with the selected email address as a destination.Filter by CategoryYou can display only phonebook entries saved in a specified category to find an entry.aPhonebook list (P98) y h [Function] y "Filter by" y "Category"bSelect a category y h [Select]The Phonebook list with only members of the specified category opens.cSelect a Phonebook entry y oThe phone number entry screen opens with the phone number entered.do■To make a video callPress t.• You can also press */# several times on the Phonebook list.Viewing a Phonebook Entry• You can change the display format of the Phonebook list from "Setup" on the Function menu. →P102adaA phone number for video callsbThe first phone number and typeIf no phone number is saved, saved mail address and type icon, URL and URL icon, or postal address and type icon will be displayed.cAppears if more than one item is savedPress s to switch the displayed item.bSelect a Contact y cPhonebook list screen (List)Phonebook list screen (Picture)acbPhonebook detail screen
99Phonebook XXXXX■Operations from the Phonebook listSelect a Phonebook entry and press o/t to make a call, send mail or visit a site. Perform operations as follows: Contacts: The phone number entry screen opens with the phone number entered.Email Address: The send message screen opens with the address entered.URL: Connects to a URL.• If a Phonebook entry is displayed with $★$, use s to change the display■Operations from the Phonebook detail screenSelect a phone number and press o/t. The phone number entry screen opens with the phone number entered. Select an Email or URL and press o/t to make a video call to Internet video call. (Checking the specifications)Select a phone number, Email, or URL and press c to open a screen of the following items: "Call": Makes a voice call to the selected phone number."Video Call": Makes a video call to the selected phone number/mail address."Send Message": Create and send a new message to the selected phone number/Email as an address. →P172"Connect": Connects to the selected URL."Store as Bookmark": Save the selected URL in Bookmarks.The Function Menu on the Phonebook List/Phonebook Detail ScreenaPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y Perform the following operationsSearchSearch for a Phonebook entry. →P97Send MessageCreate and send a message with the phone number or Email of the currently selected/displayed entry as an address. →P172Caller IDSets send/hide Caller ID to the phone number of the entry currently selected/displayed.y "Show ID"/"Hide ID"Multi NumberMakes a call by selecting an additional phone number of the currently selected/displayed entry. →P251Browse URLConnects to the URL saved in the currently displayed/selected Contact.Create NewGo to Step 2 in "Saving in Phone Contacts" (P91)/Step 1 "Saving in UIM Contacts" (P93).Edit ContactEdit the selected/displayed Contact. Go to Step 2 in "Saving in Phone Contacts" (P91)/Step 1 "Saving in UIM Contacts" (P93).Add to Speed DialSave the phone number of the currently selected/displayed entry as a speed dial.y Select a dial number y h [Select]Remove Speed DialCancels the phone number of the currently selected/displayed entry as a speed dial.ViewSelect a type of Phonebook (Phone or UIM) to be displayed on the Phonebook list.Default View:(Checking the specifications)Phone & UIM CardUIM CardPhone Contacts: Displays all Phonebook entries.: Displays entries only in the UIM phonebook.: Displays entries only in the Handset phonebook.Continued on the next page
100Phonebook XXXXXFilter bySets the displaying method of the Phonebook list.Insert in MessageCreate and send a message with the name and phone number or Email of the currently selected/displayed entry as an address. →P172Send ContactSends the currently selected/displayed entry as a vCard file using Bluetooth. →P239Delete NumberDeletes a selected phone number.Delete EmailDeletes a selected Email address.Delete URLDeletes a selected URL.Delete Postal AddressDeletes a selected postal address.Delete ContactDeletes the selected/displayed entry.PrintPrints the currently selected/displayed entry using a Bluetooth printer. →P240Select Multiple toSelect more than one Phonebook entry and perform various operations. For steps to select multiple entries, see "Selecting and Deleting More than One Phonebook Entry" (P101).Manage ContactsCopy to UIM CardCopies the handset contacts to the UIM phonebook.y h [Yes]Copy to PhoneCopies the UIM contacts to the handset phonebook.Edit Before CallThe phone number entry screen opens with the phone number of the currently selected/displayed entry. →P54SetupSet a display format (View by) of the Phonebook list or specify the default storage location when you save a Contact. →P102All ContactsAll Phone ContactsAll UIM ContactsEmailCategory: Displays all Phonebook entries. This option appears only when "View" is set to "Phone & UIM".: Displays all entries in the Handset phonebook. This option appears only when "View" is set to "Phone Contacts".: Displays all entries in the UIM phonebook. This option appears only when "View" is set to "UIM".: Displays only entries with an Email address. →P97: Displays entries only in the specified category. →P98Send MessageDeleteCopy to UIM CardCopy UIM to PhonePrint: Specify more than one mail destination. Selecting destinations opens the Compose Message screen with addresses entered.: Deletes multiple phonebook entries at once.: Copies multiple phone contacts to the UIM phonebook at once.: Copies multiple UIM contacts to the Handset phonebook at once.: Prints multiple phonebook entries to a Bluetooth printer at once. →P240Speed DialEdit CategoriesEdit UIM CategoriesPhone CapacityUIM Capacity: Check, save or delete the Speed dial. →P103: Sets categories to the Handset phonebook. →P95: Sets categories to the UIM phonebook. →P95: Checks the available memory on the handset phonebook. →P103: Checks the available memory on the UIM phonebook. →P103
101Phonebook XXXXXSecret CodeSave the secret code.Enter the unlock code y Enter the secret code y h [Save]Send TonesSends the phone number of the currently displayed/selected entry as push signals (DTMF). (Checking the specifications)• If "UIM" is selected, $★$ is displayed on the Phonebook list.• If you have saved more than one phone number, email address, URL or postal address and delete the first one, the second and subsequent ones will be moved up and saved.• If you select a phone number or email address saved with the secret code and display the function menu on the Phonebook detail screen, "＊" appears next to the item name of the "Secret code".Deleting ContactsDeleting One ContactaPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y "Delete Contact"Deletes the selected/displayed entry.• For deleting from the Phonebook list, select an entry then delete it.Select and Delete More Than One Contact at a Time.• If either of the handset phonebook or UIM phonebook is displayed, entries are deleted from the displayed Phonebook.aPhonebook list (P98) y h [Function] y "Select Multiple to" y "Delete"bSelect a Phonebook entry y c y i [Complete]• Select all Phonebook entries and press i [Complete].ch [Yes]ViewDelete phone number/Delete email address/Delete URL/Delete postal addressSecret codeMultiple selection screen
102Phonebook XXXXXThe Function Menu on the Multiple Selection ScreenaMultiple selection screen (P101) y h [Function] y Perform the following operationsSearchSearch for a Phonebook entry. →P96Select AllSelects all Phonebook entries.Unselect AllCancels the selection of all.View SelectedA list of selected Phonebook entries opens.View bySet a view of the Phonebook list.y "Picture"/"List"CancelCancels the operation.• When "View" is set to "UIM Card", select "1-Line" or "2-Line".SetupSetting Details of the PhonebookYou can set a display format (View by) of the Phonebook list or specify the default storage location when you save a Contact.• When "View" is set to "UIM Card", the Display format is set to "View By 1-Line" by default.aPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y "Setup" y Perform the following operationsView byy "Picture"/"List"Default StorageSet the saving destination displayed in "Store To" in advance when the Create Contact screen opens.y "Phone"/"UIM Card" yh [Yes]• If "Phone" is selected, setup of default storage completes.• When "View" is set to "UIM Card", select "1-Line" or "2-Line".Default View by: (Checking the specifications)View byDefault View by: List Default Storage: PhoneView by
103Phonebook XXXXXPhone Capacity/UIM CapacityChecking the Phonebook Capacity and UtilizationYou can check the available memory space on the phone and the UIM.aPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y "Manage Contacts" y "Phone Capacity"/"UIM Capacity"Making a Call Using Speed DialYou can quickly make a call only by pressing a dial key from 1 to 7 to dial the phone number assigned to the key.• You need to assign a phone number to a dial key in advance.aPress a dial key from 1 to 7 (for 1+ seconds)The corresponding speed dial phone number is dialed.■To View the assigned phone numbersOn the Phonebook detail screen (P98), press h [Function] y select "Manage Contacts" y "Speed Dial". The Speed Dial Entries screen (P103) opens and you can check the phone number assigned to each dial key.Assigning a Phone Number to a Dial KeyYou can assign a phone number from a contact to make Speed dial calls.• A contact that does not have a phone number cannot be saved in Speed dial.aPhonebook list (P98)/Phonebook detail screen (P98) y h [Function] y "Add to Speed Dial"• Select a Contact before performing steps on the Phonebook list.bSelect a dial number y h [Select] (Checking the specifications)■If a dial number already saved is selectedThe confirmation to overwrite appears. Press h [Yes] to overwrite.The Function Menu on the Speed Dial Entries ScreenaSpeed Dial Entries screen (P103) y h [Function] y Perform the following operationsSpeed Dial Entries screenScreen to be insertedContinued on the next page
104Phonebook XXXXXAssign ContactAssign a phone number to a speed dial number.y Select a Contact y h [Select]Change ContactChange the assigned phone number.y Select a Contact y h [Select]Remove ContactCancels the phone number assignment.Clear AllDeletes all assigned phone numbers.y h [Yes]Specifying a Contact to Use as a Speed Dial (Checking the specifications)ac y $★$ (Settings) y "General Settings" y "Speed Dial" y "Phone Memory"Default Phone Memory
105Tone/Screen/Light SettingsTone SettingsSelecting Ring Styles<Style> ..........................................................................106Changing the Ringer ID and Volume...............................................................107Vibrating Instead of Ringtone or Alarm<Vibrate> .........................................108Setting a Push Tone Signal (DTMF)<DTMF> ..................................................109Sounding a Ringtone Only from the Headset<Ringer Function>.................110Muting Handset Tones<Manner Mode> ..........................................................110Changing Manner Mode<Mode> .....................................................................110Screen/Light SettingsChanging the Display of the Stand-by Display<Wallpaper> .........................112Changing the Appearance of the Main Menu<Main Menu> ..........................113Setting a Skin<Skin> ........................................................................................113Displaying a Wake-up Message<Greeting>....................................................114Launching the Screen Saver<Screen Saver>.................................................114Setting Ring Lights<Ring Lights>...................................................................114Setting Event Lights<Event Lights> ...............................................................115Displaying Date & Time on the Talking Screen<Date and Time> .................115Setting the Clock Format<Home Screen> ......................................................115Setting Time Duration before Display is Turned Off<Display Timeout>......116Setting the Backlight Lighting Duration<Backlight>.....................................116Setting Scrolling of the Screen<Scroll> .........................................................116Setting the Text Marquee Speed<Text Marquee>...........................................117Adjusting the Display Brightness<Brightness> ............................................117
106Tone/Screen/Light Settings XXXXXStyleSelecting Ring StylesBy changing the Sound Profile, you can change the ringtone, alarm tone, ring volume and keypad sound volume at once.• You can change the pre-set tones or volumes. →P107ac y $★$ (Settings) y "Sound Profiles" y "Style"b"Loud"/"Soft"/"Vibe&Ring"■To not SoundSelect "Silent".• After a Profile is selected, one of the following icons appears at the top of the screen: $★$ (Loud) $★$ (Soft) $★$ (Vibe&Ring) $★$ (Silent)• When "Vibe&Ring" is selected, the handset vibrates at the same time as the ringer ID sounds.■Settings for each profileThe following table shows the pre-set function: (Checking the specifications)Default LoudItem StyleLoud Soft Vibe&Ring SilentRing Volume 7 4 7 −Calls(Checking the specifications) (Checking the specifications) (Checking the specifications)−Messages(Checking the specifications) (Checking the specifications) (Checking the specifications)−Ans Mach(Checking the specifications) (Checking the specifications) (Checking the specifications)−Calendar Alarm(Checking the specifications) (Checking the specifications) (Checking the specifications)SilentData Calls(Checking the specifications) (Checking the specifications) (Checking the specifications)−Ringer IDs On On On −Key Volume 2 2 7 −Reminders Beep Beep Beep VibrateStyle screen
107Tone/Screen/Light Settings XXXXXChanging the Ringer ID and VolumeYou can change various tones set to Profiles. You can also set the Ringer ID saved for a Contact to silent.• Set "Style" to "Loud"/"Soft"/"Vibe&Ring"/"Silent" in advance.• When "Style" is set to "Silent", you can change only "Calendar Alarm" and "Reminders".ac y $★$ (Settings) y "Sound Profiles" y "(Style name) Detail"• The Style name set under "Style" is displayed in "(Style)".bPerform the following operationsRing VolumeThe volume can be adjusted in eight levels from 0 to 7.y Use j to adjust the volume yh [OK]CallsChange the ringer ID for incoming calls. Go to Step 3.MessagesChange the ringer ID for incoming mail. Go to Step 3.Ans MachChange the ringer ID that sounds when a message is recorded in Voicemail. Go to Step 3.Calendar AlarmChange the alarm tone that sounds at a Datebook alarm time. Go to Step 3.Data CallsChange the ringer ID for incoming data. Go to Step 3.Set whether to sound the ringer ID saved for a contact. (Checking the specifications)y "On"/"Off"Ringer IDsSet whether to sound the ringtone registered in the Phonebook entry. (Checking the specifications)y "On"/"Off"Key VolumeAdjust the volume of the keypad sound. The volume can be adjusted in 8 levels from 0 to 7.y Use j to adjust the volume y h [OK]Reminders (Checking the specifications)cSelect a folder y c y Select a ringtone or melody y cDefault See "Settings for Each Profile" (P106)BeepVibrateOff: Sounds the beep tone.: Vibrates the handset.: No action is taken.Style Detail screen (For Loud)To be insertedContinued on the next page
108Tone/Screen/Light Settings XXXXX• The ring volume or keypad sound volume can also be entered using dial keys.• If you set a video/i-motion movie as a ringtone, the graphics and sound are played when a call/message arrives (Chaku-motion).• Some i-motion movies, such as an i-motion movie without audio, cannot be set as the ringtone. (Checking the specifications)• If an i-motion movie with a video and sound is set as the ringtone, even if the caller is saved in the Phonebook, the Picture ID is not displayed and the i-motion movie with sound is played. However, if the i-motion movie has only sound, the Picture ID is displayed. (Checking the specifications)• When "Style" is set to "Silent", "Beep" cannot be set.■Ringtones, Melodies and Alarm Tones (Pre-installed)VibrateVibrating Instead of Ringtone or AlarmYou can set the handset to vibrate when a call or mail arrives or at a Datebook alarm time instead of a ringer ID or alarm tone. • You can change the pre-set vibration pattern. →P109ac y $★$ (Settings) y "Sound Profiles" y "Style"b"Vibrate"•$★$ appears at the top of the screen when Vibration is set.Call RingtoneRemindersAmbient Urban Funky break Nocturne Bossa WaFlowers Interlude Space ping pongSoaring High Hellomoto Moving upSolar Midnight KatanaBeats Ringer Hello Vapor Alert CyberspaceFusion Bells WatermarkUltra Violet Standard Got a mailGrooving Triads Morning waveDigital Provincial Big MamaDefault Style: LoudStyle screen
109Tone/Screen/Light Settings XXXXXSetting a Vibration PatternYou can set a vibration pattern for events such as when a call or mail arrives, or at a Datebook alarm time.• Set "Style" to "Vibrate" in advance.aSound/Vibration setting screen (P106) y "Vibrate Detail"Calls : Change the vibration pattern for an incoming call.Message Alert : Change the vibration pattern for incoming mail.Voicemail : Change the vibration pattern when a message is recorded in Voicemail.Calendar Alarm : Change the vibration pattern for a Datebook alarm time.Data Calls : Change the vibration pattern for incoming data.Reminders : (Checking the specifications)bSelect an event y h [Change]Silent : The handset does not vibrate.Vibe Dash : (Checking the specifications)Vibe Dot : (Checking the specifications)Vibe Dot Dash : (Checking the specifications)Vibe Dot Dash : (Checking the specifications)Vibe Pulse : (Checking the specifications)cSelect a vibration pattern y h [Select]• When "Reminders" is selected, select "Vibrate" or "Off", then press h [Select].• When a vibration pattern is selected, the handset vibrates in the selected pattern.DTMFSetting a Push Tone Signal (DTMF)You can change the length of a push signal (DTMF). You can also set it not to sound.ac y $★$ (Settings) y "General Settings" y "DTMF" y Select length y h [Select]• When "Off" is selected, push signals (DTMF) will not be sent even if a dial key is pressed.Default Calls: Vibe Dot Message Alert: Vibe Dot Voicemail: Vibe PulseCalendar Alarm: Vibe Dot Dash Data Calls: Vibe Dot DashDefault Long
110Tone/Screen/Light Settings XXXXXRinger FunctionSounding a Ringtone Only from the HeadsetYou can set the device to sound a ringer ID while the miniUSB stereo headset M01 (optional) is connected to the handset.ac y $★$ (Settings) y "Headset" y "Ringer Function" y Select a device y h [Select]Speaker Only : The ringtone sounds only from the speaker.Headset Only : The ringtone sounds only from the headset.Headset & Speaker : The ringtone sounds from both speaker and headset.• Do not tie the cable of a miniUSB stereo headset M01 (optional) around the handset.Manner ModeMuting Handset TonesTurn off the tones that sound from the handset so as not to disturb others.• There are 3 types of Manner Mode: "Silent", "Manner Mode" and "Original Manner Mode". Select the one that fits your usage. →P110a# (for 1+ seconds)■To cancel Manner modePress # (1+ seconds) on the wallpaper screen.•$★$ appears at the top of the screen when Manner mode is set.• A notification appears when you try to play a melody, video clip with sounds, or i-motion while Manner mode is set. (Checking the specifications)• Even when Manner mode is set, the camera shutter tone sounds. (Checking the specifications)ModeChanging Manner ModeSelect actions of Manner mode from "Silent", "Manner mode" or "Original manner mode".• You can change the actions of Original manner mode. →P111ac y $★$ (Settings) y "Personalize" y "Manner Mode" y Select a mode y h [Select]Default Headset & SpeakerDefault Silent
111Tone/Screen/Light Settings XXXXX■Action in Each Mode (Checking the specifications)*1: Indicates the items in "Original Manner Detail".*2: The handset vibrates for incoming calls, chat mail or mail, when a message is recorded in Voicemail, at an Alarm or Datebook alarm time, and for incoming data.Setting Actions in Original Manner ModeYou can change the actions of Original manner mode.ac y $★$ (Settings) y "Personalize" y "Manner Mode" y "Original Manner Detail"bPerform the following operationsRing VolumeThe volume can be adjusted in 8 levels from 0 to 7.y Use j to adjust the volume y h [OK]Silent Manner Mode Original Manner Mode*1Ring Volume (for Calls, Text Message, Voicemail or Data Calls)(Checking the specifications) (Checking the specifications) In accord with the settings in "Ring Volume"Vibrate*2 (Checking the specifications) (Checking the specifications) In accord with the settings in "Calls", "Chat mail", "Messages", "Voicemail", "Alarm", or "Data Calls"Alarm Volume (Checking the specifications) (Checking the specifications) In accord with the settings in "Ring Volume"Datebook Alarm Volume (Checking the specifications) (Checking the specifications) In accord with the settings in "Ring Volume"Reminders (Checking the specifications) (Checking the specifications) In accord with the settings in "Reminders"Ringer IDs (Checking the specifications) (Checking the specifications) In accord with the settings in "Ringer ID"Response Hold Volume (Checking the specifications) (Checking the specifications) (Checking the specifications)Call Hold Volume (Checking the specifications) (Checking the specifications) (Checking the specifications)Key Volume (Checking the specifications) (Checking the specifications) In accord with the settings in "Key Volume"Low Battery Alert (Checking the specifications) (Checking the specifications) In accord with the settings in "Low Battery Alert"Microphone Sensitivity (Checking the specifications) (Checking the specifications) In accord with the settings in "Microphone Sensitivity"DefaultRing Volume: 0 Calls: (Checking the specifications) Chat mail: (Checking the specifications)Text Messages: (Checking the specifications) Voicemail: (Checking the specifications)Alarms: (Checking the specifications) Data Calls: (Checking the specifications)Ringer IDs: Off Key Volume: 0 Reminders: Beep Low Battery Alert: Off Microphone Sensitivity: OnOriginal Manner Detail screenScreen to be insertedContinued on the next page
112Tone/Screen/Light Settings XXXXXCallsChange the vibration pattern for an incoming call. Go to Step 3. (Checking the specifications)Chat mailChange the vibration pattern for incoming chat-mail. Go to Step 3. (Checking the specifications)Message AlertChange the vibration pattern for incoming mail. Go to Step 3. (Checking the specifications)VoicemailChange the vibration pattern when a message is recorded in Voicemail. Go to Step 3. (Checking the specifications)Calendar AlarmChange the vibration pattern for an Alarm or Datebook alarm time. Go to Step 3. (Checking the specifications)Data CallsChange the vibration pattern for incoming data. Go to Step 3. (Checking the specifications)Ringer IDsSet whether to sound the ringtone saved in a Phonebook entry. (Checking the specifications)y "On"/"Off"Key VolumeAdjust the volume of the keypad sound. The volume can be adjusted in 8 levels from 0 to 7.y Use j to adjust the volume y h [OK]Reminders (Checking the specifications)Low Battery AlertSet whether to sound the Low battery alarm.y "On"/"Off"Mic SensitivitySet whether to increase the microphone sensitivity so that the other party can hear a low voice better.y "On"/"Off"cSelect a vibration pattern y h [Select] (Checking the specifications)• Vibration patterns →P109• The ring volume or keypad sound volume can also be entered using dial keys.WallpaperChanging the Display of the Stand-by Displayac y $★$ (Settings) y "Personalize" y"Wallpaper" y Perform the following operationsPictureChange the image to be displayed on the Standby screen.y Select a folder y c y Select an image y cBeepVibrateOff: Sounds the beep tone.: Vibrates the handset.: No action is taken.Default Picture: (Checking the specifications) Layout: Fit-to-screen Calendar: Off
113Tone/Screen/Light Settings XXXXXLayoutAdjust the position of the image set in "Picture".CalendarSet whether to display a Calendar on the wallpaper screen.y "On"/"Off"• For pre-installed wallpaper, see "Default Settings". →P288• When an i-appli standby screen is set, the i-appli standby screen takes precedence. →P196• If an animation GIF is set for a standby screen, the following operations are available while the standby screen is displayed:(Checking the specifications) (Checking the specifications)Main MenuChanging the Appearance of the Main MenuYou can change the Main menu items to be displayed as Icons or in a list. You an also change the order of items.ac y $★$ (Settings) y "Personalize" y "Main Menu" y Perform the following operationsViewy "Icons"/"List"Reordery Use j to select a function y h [Grab] y Use j to move the function to a new position y h [Insert] y i [Complete]SkinSetting a SkinYou can change the screen design of the FOMA handset. (Checking the specifications)ac y $★$ (Settings) y "Personalize" y "Skin" y Select a skin y h [Select]CenterTileFit-to-screen: Places the image at the center of the screen.: Tiles the image.: Enlarges/shrinks the image to fit to the screen.PicturesDefault View: IconsDefault MotoDisplayed as listDisplayed as icons
114Tone/Screen/Light Settings XXXXXGreetingDisplaying a Wake-up MessageYou can display a greeting after the Wake-up screen opens when you turn the handset power on.ac y $★$ (Settings) y "Personalize" y "Greeting" y Enter a message• Up to 32 full-/half-pitch characters can be entered.Screen SaverLaunching the Screen SaverYou can set to launch a screen saver if no operation is performed for a specific time.ac y $★$ (Settings) y "Personalize" y "Screen Saver" y Perform the following operationsPictureYou can change the screen saver image.Select a folder y c y Select an image y cDelaySets the duration before the screen saver launches.y Select a time y h [Select]• If you select "Off", the screen saver does not start.• The screen saver does not start if the set time is shorter than the time set in "Display Timeout". (Checking the specifications)Ring LightsSetting Ring LightsYou can set the incoming call lamp to blink when a call or mail arrives. (Checking the specifications)ac y $★$ (Settings) y "Sound Profiles" y "Ring Lights" y "(None)"/"<Lights>"Default Picture: (Checking the specifications) Delay: 1 minuteDefault None
115Tone/Screen/Light Settings XXXXXEvent LightsSetting Event LightsYou can set the incoming call lamp to blink at an alarm or Datebook alarm time. (Checking the specifications)ac y $★$ (Settings) y "Sound Profiles" y "Event Lights" y "On"/"Off"Date and TimeDisplaying Date & Time on the Talking ScreenYou can set the date and time in Talking screen for voice calls.ac y $★$ (Settings) y "In-Call Setup" y "Date and Time" y "Show Date"/"Show Time" y "On"/"Off"Home ScreenSetting the Clock FormatYou can change the appearance of the clock, or position of the clock or date on the Standby screen. You can also set to not display the clock or date.ac y $★$ (Settings) y "Personalize" y "Home Screen" y Perform the following operationsClockDateSet whether to display the date.y "On"/"Off"LayoutSet the position of the clock and date.y "Left Justified"/"Centered"• "Analog" cannot be set when "Calendar" for "Wallpaper" is set to "On".Default OnDefault Show Date: On Show Time: OnDefault Clock: Digital Date: On Layout: CenterDigitalAnalogOff: A digital clock is displayed.: An analog clock is displayed.: A clock is not displayed.Clock
116Tone/Screen/Light Settings XXXXXDisplay TimeoutSetting Time Duration before Display is Turned OffYou can set to turn off the display to save power if no operation is performed during the set time.ac y $★$ (Settings) y "General Settings" y "Display Timeout" y Select a time duration before the display is turned off y h [Select]• The display does not turn off if you select "Off".BacklightSetting the Backlight Lighting DurationYou can set to turn off the display lighting to save power if no operation is performed during the set time.ac y $★$ (Settings) y "General Settings" y "Backlight" y Select time y h [Select]• The display remains lit if you select "Continuous".• Even if you set this option to "Continuous", the display is turned off after the time set in "Display Timeout" elapses. (Checking the specifications)ScrollSetting Scrolling of the ScreenYou can set the movement of the cursor on the screen with listed items such as Function menu.ac y $★$ (Settings) y "General Settings" y "Scroll"Up/Down : The cursor does not move when u is pressed if the cursor is at the top item, or when d is pressed if the cursor is at the bottom item.Wrap Around : Moves the cursor to the bottom or top when j is pressed if the cursor is at the top or bottom item.bSelect a scrolling method y h [Select]Default 2 minutesDefault 10 secondsDefault Wrap Around
117Tone/Screen/Light Settings XXXXXText MarqueeSetting the Text Marquee SpeedThe FOMA handset scrolls a partially hidden name such as Function menu item. You can set the scrolling speed.ac y $★$ (Settings) y "General Settings" y "Text Marquee" y Select a speed y h [Change]• When an item is selected, the item name is scrolled at the selected speed.• The item name does not scroll when it is highlighted if you select "Off".BrightnessAdjusting the Display BrightnessYou can set the brightness of the screen in 6 levels.ac y $★$ (Settings) y "General Settings" y "Brightness" y Use a to adjust the brightness y h [OK]Default SlowDefault 3

Navigation menu